Themanamiddag 15 nov 2011Additive Manufacturing voor metaal en keramiek                                  het collectief ce...
Programma13u00: Welkom - Benjamin Denayer, Sirris13u15: Selective Laser Melting: nieuwe materialen voor industriële       ...
An IntroductionEFRO-Raplab is a networking project set up to introduce Additive Manufacturing technologies incompanies (AM...
The Raplab funnel                          Duurzame productie                                               Cleantech insp...
Objectives of the Network1. The promotion and introduction of a sustainable production in companies through theimplementat...
Learn more onadditivemanufacturing.be     A dedicated website has been set-up in the     framework of the Raplab project. ...
Het collectief centrum van de Belgische technologische industrie
Driving industry by technology           Ondernemingen helpen bij het invoeren van               technologische innovaties...
Kerncijfers Sirris            > 120 technologie experts verspreid over 6 sites in de 3 regiosGent                         ...
6 expertise domeinen & 3 industrial application labs •Materials Engineering     •Additive Manufacturing •Production Techno...
Wat kan Sirris voor u betekenen? uitgebreid partnernetwerk - optimale projectfinanciering (publiek&privaat)               ...
info@sirris.be / #Sirris / Sirris_be     WWW.SIRRIS.BE                                  TECHNILINE.SIRRIS.BE       News & ...
Workshop - Additive manufacturing ISO/TC 261Programma    •   Welkom en voorstelronde (Dirk De Moor, Agoria)    •   Technol...
Programma13u00: Welkom - Benjamin Denayer, Sirris13u15: Selective Laser Melting: nieuwe materialen voor industriële       ...
Upcoming SlideShare
Loading in …5
×

2011 11-15 themadag am voor metaal en keramiek- introductie - benjamin denayer - sirris

466 views

Published on

Additive manufacturing voor metaal en keramiek

Published in: Technology, Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
466
On SlideShare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
6
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

2011 11-15 themadag am voor metaal en keramiek- introductie - benjamin denayer - sirris

  1. 1. Themanamiddag 15 nov 2011Additive Manufacturing voor metaal en keramiek het collectief centrum van de Belgische technologische industrie 1
  2. 2. Programma13u00: Welkom - Benjamin Denayer, Sirris13u15: Selective Laser Melting: nieuwe materialen voor industriële toepassingen - Karolien Kempen, K.U.Leuven13u50: Opbouwen van materiaal via lasercladden in de praktijk - Marleen Rombouts, Vito14u25: Nieuwe technische mogelijkheden: Electron Beam Melting and ceramic AM parts - Carsten Engel, Sirris15u00: Break15u15: Toepassingen in de machinebouw - Jonas Van Vaerenbergh, LayerWise15u50: Direct Spare - A European approach for spare parts on demand - Karel Brans, Materialise16u30: Labobezoek + receptie18u30: Einde © sirris 2011 | www.sirris.be | info@sirris.be | 22/11/2011 2
  3. 3. An IntroductionEFRO-Raplab is a networking project set up to introduce Additive Manufacturing technologies incompanies (AM). Aim of the project The promotion & the introduction of a sustainable and ecological production in Flanders through the implementation of Additive Manufacturing technologies. Facts & figures 2 year duration, started 1 February 2010. The project budget equals 631.202€ and is funded by EFRO, the Flemish government and the project partners. Funneling ideas towards concrete business models The EFRO-Raplab project will put forward new and innovative business models on Additive Manufacturing. This will be realized through virtual factories that will be concretized using a funnel model. This model will turn a number of ideas into some concrete business models. 3
  4. 4. The Raplab funnel Duurzame productie Cleantech inspireren Brainstorm 10 workshops 6 business cases 3 implementaties22/11/2011 4
  5. 5. Objectives of the Network1. The promotion and introduction of a sustainable production in companies through theimplementation of Additive Manufacturing technologies. For the target group* the impact ofAM on the different manufacturing processes will be made more explicit. 2. The generation of new and innovative business models on Additive Manufacturing This will be achieved by means of virtual factories which will be made more concrete through a funnel model. This funnel model will transform a variety of ideas into a number of business models. 3. The promotion of Rapid Manufacturing as a sustainable and ecological technology *Target Group - Focus on Flemish companies from the technological industry - About 400 companies (85% SME) are concerned, employing 87.000 people
  6. 6. Learn more onadditivemanufacturing.be A dedicated website has been set-up in the framework of the Raplab project. Here, more recent information can be found on: -the progress of the project -the activities of the different partners -a range of AM technologies -Funneling process for the selected democases www.additivemanufacturing.be additivemanufacturing@sirris.be 6
  7. 7. Het collectief centrum van de Belgische technologische industrie
  8. 8. Driving industry by technology Ondernemingen helpen bij het invoeren van technologische innovatiesFederatie Collectief centrumvan de technologische industrie van de technologische industrie • Non-profit organisation • Industry-owned © sirris 2011 | www.sirris.be | info@sirris.be | 22/11/2011 8
  9. 9. Kerncijfers Sirris > 120 technologie experts verspreid over 6 sites in de 3 regiosGent LeuvenMaterials Engineering Mechatronics Technology Coaching Sirris Leuven Composites Application Lab 5000 interventies per jaarBrussel HasseltSoftware Engineering & ICT Materials Engineering bij 1840 verschillendeTechnology Coaching Production Technology Smart Coating Application Lab ondernemingen Waarvan 75% voor KMO’sCharleroi LuikAdditive Manufacturing Additive Manufacturing Materials Engineering Sirris Microfabrication Application Lab © sirris 2011 | www.sirris.be | info@sirris.be | 22/11/2011 9
  10. 10. 6 expertise domeinen & 3 industrial application labs •Materials Engineering •Additive Manufacturing •Production Technology •Software Engineering & ICT •Mechatronics •Technology Coaching Sirris Smart Coating SirrisSirris Leuven Application Lab MicrofabricationComposites Application LabApplication Lab © sirris 2011 | www.sirris.be | info@sirris.be | 22/11/2011 10
  11. 11. Wat kan Sirris voor u betekenen? uitgebreid partnernetwerk - optimale projectfinanciering (publiek&privaat) Intellectueel Eigendom blijft bij bedrijf © sirris 2011 | www.sirris.be | info@sirris.be | 22/11/2011 11
  12. 12. info@sirris.be / #Sirris / Sirris_be WWW.SIRRIS.BE TECHNILINE.SIRRIS.BE News & agenda Wekelijkse technologiewacht interAction newsletter Wereld van kennis Contacts Snel en gemakkelijk © sirris 2011 | www.sirris.be | info@sirris.be | 22/11/2011 12
  13. 13. Workshop - Additive manufacturing ISO/TC 261Programma • Welkom en voorstelronde (Dirk De Moor, Agoria) • Technologieontwikkelingen in het domein van additive manufacturing (Bart Van der Schueren, Materialise) • Normalisatie ontmaskerd (Dirk De Moor, Agoria) • Normalisatie in het domein van additive manufacturing (Benjamin Denayer, Sirris) • Brainstorming: hoe wenst België dit domein te volgen? (Dirk De Moor, Agoria) • Voorstelling en rondleiding bij Materialise (Karel Brans, Materialise) • VariaDatum: woensdag 7 december 2011 (14:00 - 17:00)Plaats: MaterialiseDeelnemingskosten: Gratis voor leden en niet-ledenInschrijving: via Agoria-website.Contactpersoon Agoria: Dirk De Moor, tel. +32 2 706 79 84Contactpersoon Sirris: Benjamin Denayer, tel. +32 498 91 93 70 © sirris 2011 | www.sirris.be | info@sirris.be | 22/11/2011 13
  14. 14. Programma13u00: Welkom - Benjamin Denayer, Sirris13u15: Selective Laser Melting: nieuwe materialen voor industriële toepassingen - Karolien Kempen, K.U.Leuven13u50: Opbouwen van materiaal via lasercladden in de praktijk - Marleen Rombouts, Vito14u25: Nieuwe technische mogelijkheden: Electron Beam Melting and ceramic AM parts - Carsten Engel, Sirris15u00: Break15u15: Toepassingen in de machinebouw - Jonas Van Vaerenbergh, LayerWise15u50: Direct Spare - A European approach for spare parts on demand - Karel Brans, Materialise16u30: Labobezoek + receptie18u30: Einde © sirris 2011 | www.sirris.be | info@sirris.be | 22/11/2011 14

×