Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.
WARNING/AVERTISSEMEN
Risk of Fire. Do not install insulation within
3 inches (76 mm) of luminaire top.
Risques d’incendie....
INSTALLATION STEPS
Items
3030 3060 6060 6262 3012 6012
X 2 X 3
X 2 X 3
X 4 X 6
X 2 X 3
X 2 X 3
wire A
wire B
Unscrew the h...
Adjust the length of the suspended cable to the
desired length.
5 Screw the suspended cable to the ceiling fixture.6
Dista...
Upcoming SlideShare
Loading in …5
×

LED PANEL LIGHT Suspended Installation Guide

1.Insert the wall plugs
2.Unscrew the highlighted screws
3.Screw the suspended panel fixture
4. Screw the suspended cable
5.Adjust the length
6.Screw the suspended cable to the ceiling fixture.
7.Please note the recommended distances
8.Fix the LED Panel to the ceiling
9.Connect the LED Driver to AC mains power.

  • Login to see the comments

  • Be the first to like this

LED PANEL LIGHT Suspended Installation Guide

  1. 1. WARNING/AVERTISSEMEN Risk of Fire. Do not install insulation within 3 inches (76 mm) of luminaire top. Risques d’incendie. Ne pas installer d’isolation à moins de 76 mm (3 pouces)au-dessus du luminaire. CAUTION Donotperforatetheintegrityoftheluminaire. Only screwintothethreadedmountingbracketholes locatedatthefourcornersofthefixture. Environmental Operating Temperature Range Environmental Rating Environmental Storage Temperature Range -10°C to +40°C Dry location rated -40°C to +60°C Refer toTLP Series LED Panel Specification for more lamp electronical data info. Storage Info www.sgslight.com | sales@sgslight.com SUSPENDED For TLP-X/F/M/A/E Series
  2. 2. INSTALLATION STEPS Items 3030 3060 6060 6262 3012 6012 X 2 X 3 X 2 X 3 X 4 X 6 X 2 X 3 X 2 X 3 wire A wire B Unscrew the highlighted screws from the four corners of the LED Panel. Insert the wall plugs into the ceiling and secure the suspended surface fixture to the ceiling. 1 2 Screw the suspended panel fixture to the LED Panel.3 Screw the suspended cable to the LED Panel.4 www.sgslight.com | sales@sgslight.com SUSPENDED KITS TLP-FDJ2 TLP-FDJ3
  3. 3. Adjust the length of the suspended cable to the desired length. 5 Screw the suspended cable to the ceiling fixture.6 Distance 3030: 370mm 3060: 370mm 6060: 280mm Distance 6262: 180mm 3012: 370mm 6012: 280mm 30120/60120 Please note the recommended distances for the ceiling fixtures.7 Fix the LED Panel to the ceiling and make final adjustments for desired height and angle. 8 Connect the LED Driver to AC mains power.9 3030: A: 222mm 3060: 520mmA: 6060: 520mmA: 6262: A: 505mm 3012: A: 425+B: 425mm A: 425+B: 425mm6012: 7 3012/6012 3012/6012 www.sgslight.com | sales@sgslight.com

×