Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.
Using	the	enmo Data	
Logger	Reference	Firmware	
for	TI	SensorTag
Agenda
n enmo Overview
n Using	TI	SensorTag with	enmo
©enmo	Tech	2017,	All	Rights	Reserved2v6
enmo Overview
©enmo Tech 2017, All Rights Reserved4v6
©enmo Tech 2017, All Rights Reserved5v6
©enmo Tech 2017, All Rights Reserved6v6
©enmo Tech 2017, All Rights Reserved7v6
©enmo Tech 2017, All Rights Reserved8v6
©enmo Tech 2017, All Rights Reserved9v6
IoT Device	Support
Recipes Step-by-step	
technical	
directions	on	
how	to	program	
IoT devices
Evaluation	
Firmware
Just	program	&	
go
Source...
IoT Devices	Supported
IoT Device Availability
SensorTag
Now
Nucleo
Now
SensorTile
Now
Sensor	Beacon
Now
June
©enmo Tech 20...
enmo Support	for	TI	SensorTag
Ordering	Code Product
EN-TI-ST-FW-1
• Data	logger	evaluation firmware
• IoT.Over.Beacon tran...
Loading	enmo Starter	
Firmware	into	TI	
SensorTag
Accessing	Reference	Firmware	#1
n If	you	haven’t	done	so	already,	please	contact	
us	through	our	website,	www.enmo.mobi,	f...
Download	&	Launch	TI	SmartRF Flash	
Programmer	2	SW
©enmo Tech	2017,	All	Rights	Reservedv6 16
Select	enmo Firmware	File
©enmo	Tech	2017,	All	Rights	Reservedv6 17
Select	Programming	Options
©enmo	Tech	2017,	All	Rights	Reserved
Check	“Erase”	box
Select	“All	Unprotected	Pages”	
Check	“P...
Connect	Sensor	Tag	w/DevPack to	PC
©enmo	Tech	2017,	All	Rights	Reservedv6 19
Connect	Sensor	Tag	w/DevPack to	PC
©enmo	Tech	2017,	All	Rights	Reserved
Your	Sensor	Tag	will	
show	up	in	left	hand	
side	l...
GO!
©enmo	Tech	2017,	All	Rights	Reservedv6 21
Done	Programming
©enmo	Tech	2017,	All	Rights	Reserved
Green	Success	Bar	means	it	worked!
You	can	disconnect	the	DevPack fr...
Using	the	TI	Sensor	
Tag
Accessing	enmo Platform	
n If	you	haven’t	done	so	already,	go	to	
www.enmo.mobi and	sign-up	for	a	free	trial	
account	http...
Download	our	Development	Apps
n If	you	haven’t	done	so	already,	go	to	the	App	
Store	or	Google	Play	Store	and	download	our...
Push	Button	on	Right	Side	of	
Sensor	Tag	to	Start	Data	Logging
©enmo	Tech	2017,	All	Rights	Reserved
Push	This	Button	to	
S...
Push	Button	on	Right	Side	Button	
Again	to	Start	Data	Logging
©enmo	Tech	2017,	All	Rights	Reserved
Both	Red	&	Green	Lights...
Your	Landing	Page	Will	Display	After	
Red	&	Green	Lights	Stop	Blinking
n Need	to	change	what’s	
displayed	in	the	landing	
...
Notes
1. Be	sure	to	wait	~30-seconds	after	landing	page	is	
displayed	before	starting	data	logging	again
¨ Capturing	of	Io...
FAQ
n Can	TI	data	be	read	when	the	enmo App	is	in	
the	background:
¨Yes,	TI	data	will	be	read	even	if	App	is	in	the	
backg...
FAQ
n Can	the	content	displayed	in	the	phone	be	
changed?:
¨Yes,	you	can	change	the	content	displayed	in	the	
phone
¨Login...
FAQ
n Can	I	modify	your	starter	firmware?:
¨Yes,	you	can	modify	our	starter	firmware
¨Go	to	our	website	and	submit	a	reque...
Upcoming SlideShare
Loading in …5
×

Using the enmo Data Logger Reference Firmware for TI SensorTag

259 views

Published on

v6

Published in: Software
  • Be the first to comment

  • Be the first to like this

Using the enmo Data Logger Reference Firmware for TI SensorTag

  1. 1. Using the enmo Data Logger Reference Firmware for TI SensorTag
  2. 2. Agenda n enmo Overview n Using TI SensorTag with enmo ©enmo Tech 2017, All Rights Reserved2v6
  3. 3. enmo Overview
  4. 4. ©enmo Tech 2017, All Rights Reserved4v6
  5. 5. ©enmo Tech 2017, All Rights Reserved5v6
  6. 6. ©enmo Tech 2017, All Rights Reserved6v6
  7. 7. ©enmo Tech 2017, All Rights Reserved7v6
  8. 8. ©enmo Tech 2017, All Rights Reserved8v6
  9. 9. ©enmo Tech 2017, All Rights Reserved9v6
  10. 10. IoT Device Support
  11. 11. Recipes Step-by-step technical directions on how to program IoT devices Evaluation Firmware Just program & go Source Code Modify our Starter Firmware for your use case IoT.Over.Beacon libraries For I/O v6 ©enmo Tech 2017, All Rights Reserved11
  12. 12. IoT Devices Supported IoT Device Availability SensorTag Now Nucleo Now SensorTile Now Sensor Beacon Now June ©enmo Tech 2017, All Rights Reserved12v6
  13. 13. enmo Support for TI SensorTag Ordering Code Product EN-TI-ST-FW-1 • Data logger evaluation firmware • IoT.Over.Beacon transmission initiated by user via button push EN-TI-ST-FW-2 • Data logger evaluation firmware • IoT.Over.Beacon transmission automatically occurs every 10-minutes EN-TI-ST-FW-3 • Data logger evaluation firmware • IoT.Over.Beacon transmission occurs upon detection of movement by SensorTag accelerometer N/A • Source Code for Above Firmwares EN-TI-ST-CCS-LIB-1 • IoT.Over.Beacon library for TI Code Composer Studio ©enmo Tech 2017, All Rights Reserved13v6
  14. 14. Loading enmo Starter Firmware into TI SensorTag
  15. 15. Accessing Reference Firmware #1 n If you haven’t done so already, please contact us through our website, www.enmo.mobi, for access to our reference firmware #1 ©enmo Tech 2017, All Rights Reserved15v6
  16. 16. Download & Launch TI SmartRF Flash Programmer 2 SW ©enmo Tech 2017, All Rights Reservedv6 16
  17. 17. Select enmo Firmware File ©enmo Tech 2017, All Rights Reservedv6 17
  18. 18. Select Programming Options ©enmo Tech 2017, All Rights Reserved Check “Erase” box Select “All Unprotected Pages” Check “Program” box Select “Entire Source File” Check “Verify” box Select “Readback” box, but don’t select “Skip” v6 18
  19. 19. Connect Sensor Tag w/DevPack to PC ©enmo Tech 2017, All Rights Reservedv6 19
  20. 20. Connect Sensor Tag w/DevPack to PC ©enmo Tech 2017, All Rights Reserved Your Sensor Tag will show up in left hand side list. Select it. v6 20
  21. 21. GO! ©enmo Tech 2017, All Rights Reservedv6 21
  22. 22. Done Programming ©enmo Tech 2017, All Rights Reserved Green Success Bar means it worked! You can disconnect the DevPack from the Sensor Tag v6 22
  23. 23. Using the TI Sensor Tag
  24. 24. Accessing enmo Platform n If you haven’t done so already, go to www.enmo.mobi and sign-up for a free trial account http://enmo.mobi/pricing/ ©enmo Tech 2017, All Rights Reserved24v6
  25. 25. Download our Development Apps n If you haven’t done so already, go to the App Store or Google Play Store and download our “Development App” (search for “enmo Technologies”) n Login to our Development App using the same email address you used to login to our Platform (required to sync up your Platform account with your App) ©enmo Tech 2017, All Rights Reserved25v6
  26. 26. Push Button on Right Side of Sensor Tag to Start Data Logging ©enmo Tech 2017, All Rights Reserved Push This Button to Start Data Logging Red Light Will Blink to Indicate Data is Being Logged v6 26
  27. 27. Push Button on Right Side Button Again to Start Data Logging ©enmo Tech 2017, All Rights Reserved Both Red & Green Lights Will Blink to Indicate Data is Being Read by AppPush This Button to Stop Data Logging v6 27
  28. 28. Your Landing Page Will Display After Red & Green Lights Stop Blinking n Need to change what’s displayed in the landing page? n Just revise it in the enmo Platform and capture data again n Iterate as often as you’d like ©enmo Tech 2017, All Rights Reservedv6 28
  29. 29. Notes 1. Be sure to wait ~30-seconds after landing page is displayed before starting data logging again ¨ Capturing of IoT data by the App is triggered by the IoT device transmitting as a Beacon generating an “Entry” on the phone ¨ An “Exit” on the Beacon needs to occur before the next Entry can be detected ¨ An Exit takes ~30-seconds to be detected by the phone, hence the 30-sec wait time mentioned above 2. enmo’s initial TI firmware release supports capturing 51 records ¨ Data will wrap after 51st record ©enmo Tech 2017, All Rights Reservedv6 29
  30. 30. FAQ n Can TI data be read when the enmo App is in the background: ¨Yes, TI data will be read even if App is in the background (screen can be active or off, black screen) ¨If you setup your rule according, you’ll see the local message you setup in the landing page ¨When you bring the enmo App into the foreground, you’ll see the actual landing page ©enmo Tech 2017, All Rights Reservedv6 30
  31. 31. FAQ n Can the content displayed in the phone be changed?: ¨Yes, you can change the content displayed in the phone ¨Login to the enmo Platform, go to Landing Pages, and edit the page for the TI SensorTag, making whatever changes you want ©enmo Tech 2017, All Rights Reservedv6 31
  32. 32. FAQ n Can I modify your starter firmware?: ¨Yes, you can modify our starter firmware ¨Go to our website and submit a request for the source code for the starter firmware; you can make changes to it as needed ©enmo Tech 2017, All Rights Reservedv6 32

×