FiberStore WDM Optical Network Building Blocks
The passive WDM network building block aggregates wavelengths of light from...
The passive CWDM MUX building block can aggregates wavelengths of light from several
transmitter sources(TX) and transmits...
DWDM OADM
The 100 GHz DWDM OADM is configurable as both an OADM and a terminal multiplexer
and demultiplexer (MUX/DEMUX) t...
CWDM and DWDM transceivers from FiberStore support DDM (Digital Diagnostic
Management), and they are compliant with the Mu...
Upcoming SlideShare
Loading in …5
×

Wdm optcial network building blocks

473 views

Published on

The passive WDM network building block aggregates wavelengths of light from several transmitter sources, and transmits the combined these source light into one fiber. Each wavelength of light remains unchanged and transparent in the presence of neighboring wavelengths.

Published in: Technology
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
473
On SlideShare
0
From Embeds
0
Number of Embeds
4
Actions
Shares
0
Downloads
21
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Wdm optcial network building blocks

  1. 1. FiberStore WDM Optical Network Building Blocks The passive WDM network building block aggregates wavelengths of light from several transmitter sources, and transmits the combined these source light into one fiber. Each wavelength of light remains unchanged and transparent in the presence of neighboring wavelengths. Multiplexer and Demultiplexer An optical prism represents a convenient way to understand a MUX/DEMUX function. When a multi-color light beam goes through an optical prism, due to its unique material property and geometry, light of different colors will exit at different angles, and become, in WDM terminology, de-multiplexed. Conversely, and become, in WDM terminology, demultiplexed. Conversely, designated angles, they will exit the prism at the same angle as a single light beam becoming, in WDM terminology, multiplexed. CWDM MUX and DEMUX
  2. 2. The passive CWDM MUX building block can aggregates wavelengths of light from several transmitter sources(TX) and transmits the combined light into one fiber. Each wavelength of light remains unchanged and transparent in the presence of neighboring wavelengths. Typically, CWDM MUX and DEMUXE modules are designed with a minimum of 4 channels to a maximum of 16 channels. CWDM OADM CWDM Optical Add & Drop is the ideal solution for the increasing bandwidth demand on enterprise and metro access networks. ESCON, ATM, Fiber Channel, Gigabit-Ethernet are supported simultaneously, without disturbing each other. OADM is illustrated in a protected ring system. OADMs provide access to a signal or even more wavelengths of a wavelength-multiplexed system increasing the possibility of networking. Although this greatly improves the flexibility for CWDM, the insertion loss of these devices poses a challenge on the design of rings as CWDM uses no optical application to overcome losses. DWDM MUX and DEMUX In general, a CWDM (coarse WDM) MUX/DEMUX deals with small numbers of wavelengths, typically eight, but with large spans between wavelengths (spaced typically at around 20nm). A DWDM (dense WDM) MUX/DEMUX deals with narrower wavelength spans (as small as 0.8nm, 0.4nm or even 0.2nm), and can accommodate 40, 80, or even 160 wavelengths.
  3. 3. DWDM OADM The 100 GHz DWDM OADM is configurable as both an OADM and a terminal multiplexer and demultiplexer (MUX/DEMUX) to support a broad range of architectures ranging from scalable point-to-point links to four-fiber protected rings. The FiberStore 100 GHz Optical Add/Drop Modules (OADM) offer a family of flexible, low-cost solutions to enable capacity expansion of existing fiber. FiberStore 100GHz DWDM Optical Add/Drop (OADM) is designed to optically add/drop one or multiple DWDM channels into one or two fibers. Transceiver The compact transceivers are particularly useful when operating on bidirectional links since each site comprises a transmitter as well as receiver, laser, receiver diode, and relevant electronics for driving the laser and shaping the received signal are integrated in a small form factor module with a standardized interface. CWDM transceivers typically use directly modulated DFB lasers operating at 2.5 Gb/s and PIN receivers with a receiver module and decision circuit. The modulated output power ranges from 0 to 3 dBm, although it could be reduced at elevated temperatures since to active cooling of the devices is available due to lower-cost design. The (PIN) receiver sensitivity of the transceivers is around to lower-cost design. The (PIN) receiver sensitivity of the transceivers is around-24...26dB so that a link budget of at least 24 dB should be available, which can be used to accommodate both the insertion loss of components (multiplexer fiber) as well as penalties due to the interaction of fiber dispersion and laser chirp. At lower bit-rates, the link budget is increasing up to 32dB at 1.25 Gb/s. Fiberstore WDM transceivers with embedded transmitter and receiver functions in a single packaged module. With different grades of performance, and have been integrated into WDM networks for point to point links, metro and core networks and storage area networks (SAN) applications such as data-center mirroring. FiberStore supply 1.25Gbps (Gigabit) rate, 2.5Gbps rate, 4G rate and 10G rate CWDM & DWDM transceiver modules which enables use of CWDM/DWDM solutions for uncontrolled environment applications. CWDM transceivers can operate on 9/125um single-mode fiber to 40km or 80km by using special CWDM channels (1270nm to 1610nm, in steps of 20nm). Likewise, DWDM transceivers can supports a link length of up to 40km or 80km on single-mode fiber by using special DWDM channels ( 100GHz ITU Grid CH17 to CH61). All
  4. 4. CWDM and DWDM transceivers from FiberStore support DDM (Digital Diagnostic Management), and they are compliant with the Multi-Source Agreement (MSA) ensuring compatibility with a wide range of fiber optic networking equipment. SFP tansceiver XFP transceiver Other Building Blocks on Fiberstore 1G 2G 4G 10G Transponders (OEO) Transponders are usually used in some applications that the link length is much longer than what the power budget defines or there is not a clear line of sight between the two end nodes. OEO means optical-to-electrical-to-optical. It is one type of transponders. OEO converts optical signal to electrical signal and then to optical signal again. It allows for add-drop functionality, in addition to simple optical reply or transponder. FiberStore supply 1G, 2G and 4G OEO, 125M~4.25G OEO Converter, 125M~1.25G OEO Converter, such as SFP to SFP Optical-Electrical-Optical type media converter / repeater to meet your different requirement. 10G OEO converter is used in Telecommunication room, R&D laboratory, Data center or even 1310nm /1550nm/CWDM/DWDM Optical Wavelength Conversion. It supports multi-protocol 10G data rates including SDH/SONET STM-64/OC-192, 10G Ethernet, or 10G Fiber Channel. FiberStore supply high quality 10G Transponder, such as XFP-XFP or SFP+ to XFP or SFP+ to SFP+ Optical-Electrical-Optical type media converter / repeater. They are for connection between fiber to fiber 10Gbps equipment function as fiber mode converter/repeater for long distance transmission. For a complete listing of Fiberstore’s WDM products, refer to the latest guide on www.fiberstore.com or contact us at sales@fiberstore.com.

×