autodock manuAL

489 views

Published on

Published in: Technology, News & Politics
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
489
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
7
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

autodock manuAL

  1. 1. MBlaze USB Modem(User Manual)SW-ADU-555C-UG-V1.5Nov 23. 2009
  2. 2. MBlaze USB Modem (User Manual)2/18Contents1. Safety Precautions..................................................................................................................................31.1 The Terminal .....................................................................................................................................32. Before Usage ...........................................................................................................................................32.1 Minimum system requirement .......................................................................................................32.2 Be cautious when separating USB extension cable from your PC.......................................33. Basic Usage .............................................................................................................................................43.1 Key Features.....................................................................................................................................43.2 View of MBlaze USB Modem.........................................................................................................44. Getting Started.........................................................................................................................................55. LED Indicators (In Modem Mode) ..........................................................................................................55.1 POWER...............................................................................................................................................55.2 IDLE....................................................................................................................................................55.3 BUSY ..................................................................................................................................................56. Program Installation................................................................................................................................66.1 Minimum System Requirement......................................................................................................66.1.1 PC Hardware ..............................................................................................................................66.1.2 Operating System......................................................................................................................66.2 USB Driver Installation (Windows XP/2000)................................................................................66.3 USB Driver Installation (Windows Vista).....................................................................................76.4 Check Installed Driver.....................................................................................................................77. Using MBlaze USB Modem Program.....................................................................................................97.1 Run and Exit.....................................................................................................................................97.2 DRC information View.....................................................................................................................97.3 Descriptions for each button.........................................................................................................97.4 Descriptions for each icon...........................................................................................................107.5 Setting Menu...................................................................................................................................117.6 Connecting and Disconnecting the Internet .............................................................................137.7 Get Phone Number Menu.............................................................................................................147.8 Get Balance Menu .........................................................................................................................147.9 RCV / STV Activation Menu.........................................................................................................157.10 Help Menu .....................................................................................................................................168. Troubleshooting ....................................................................................................................................17
  3. 3. MBlaze USB Modem (User Manual)3/181. Safety Precautions1.1 The Terminal1) Do not disassemble or solder the terminalFire, injury, electric shock or malfunction may result.2) Keep the terminal away from the waterTake care not to use the terminal in areas where they could get wet.3) Do not use or leave the terminal in places with a high temperature such as near aFire or heater, or places exposed to direct sunlight or in cars under the blazing sun.Deformation, malfunction, heating the deterioration of performance may result.4) Do not use near places such as gas stations where there is danger of fire or explosion.If used where there are flammable gases such as propane, gasoline, Explosion or fire may result..5) Do not throw the terminal, or subject them to severe shocks.Malfunction may result.6) Keep out of reach of baby and infant.Accidental swallowing or injury may result.7) Do not store the terminal in humid or dusty place or in hot areasMalfunction may result.8) Turn off the terminal in place where use is prohibited such as an airplane or hospitals.Electronic and electronic medical appliance may be adversely affected.9) Turn off the PC into which the terminal is inserted in place near high-precision electronicDevice or device using weak electronic signal.The terminal may possibly cause these devices to malfunction.2. Before Usage2.1 Minimum system requirementCPU and Memory PC-AT compatible and 128MB RAM or moreInterface USB1.1Operating System. Windows 2000 / XP / Vista2.2 Be cautious when separating USB extension cable from your PCWhen removing USB extension cable while connecting to Internet, close the connection and thenremove USB extension cable. Removing USB extension cable while connecting to Internet may resultin malfunction of your modem
  4. 4. MBlaze USB Modem (User Manual)4/183. Basic Usage3.1 Key Features* This modem is for a portable high-speed internet that uses the CDMA network.Product Name ADU-555CAntenna Type Inner antenna TypeData Speed Max 3.1MB(DL)/1.8MB(UL)Operating System Windows 2000 / XP / Vista3.2 View of MBlaze USB Modem4. Getting StartedStatus LEDPower On/Off &Connection StateUSB ConnectorConnect to PC to use
  5. 5. MBlaze USB Modem (User Manual)5/18- Read Quick Start Guide- Connect to standard USB Connector5. LED Indicators (In Modem Mode)5.1 POWERMode DescriptionsRED Power On5.2 IDLEMode DescriptionsBLUE Idle status5.3 BUSYMode DescriptionsBLUE/RED Blink Busy
  6. 6. MBlaze USB Modem (User Manual)6/186. Program Installation6.1 Minimum System Requirement6.1.1 PC Hardware• Recommend to use PC/Notebook at speed of 300 MHz or higher.Minimum 233 MHz Speed required,• Intel Pentium/Celeron products, AMD K6/Athlon/Duron products or compatible processors• Recommend to use 128MB RAM or higher, Minimum 64MB of memory must be used,(But in this case the performance will be degraded and certain features will be limited.)• At least 100 MB of free hard disk space is required.• Mother Board or PCI card that supports USB.• Video adaptor with Super VGA (800 x 600) or higher resolution and Monitor• Keyboard and Mouse6.1.2 Operating SystemWindows XP Home or Professional (with Service Pack 2)Windows 2000 (with Service Pack 4 for optimal performances)Windows Vista< Recommended parameters >Windows Update: Keep your computer up to date6.2 USB Driver Installation (Windows XP/2000)Refer to the Quick Start Guide and install the modem to PC’s USB port. To check if the driver is installedproperly in “Device Manager”, see the followings in the “Device Manager”[Start Control Panel System Hardware Tab Device Manager]You should be able to see “AnyDATA CDMA USB Modem” and “AnyDATA CDMA USB Serial Device”,the driver has been successfully installed.
  7. 7. MBlaze USB Modem (User Manual)7/186.3 USB Driver Installation (Windows Vista)Refer to the Quick Start Guide and install the modem to PC’s USB port. To check if the driver is installedproperly in “Device Manager”, see the followings in the “Device Manager”[Start Control Panel System and Maintenance Device Manager]You should be able to see “AnyDATA CDMA USB Modem” and “AnyDATA CDMA USB Serial Device”,the driver has been successfully installed.6.4 Check Installed Driver1) Start [Control Panel]2) Double click on [System] icon
  8. 8. MBlaze USB Modem (User Manual)8/182) Select “Device Manager” from Hardware Tab.4) “AnyDATA CDMA USB Modem (PID 6502)” will be under [Modems].5) “AnyDATA CDMA USB Serial 1 (DIAG) Device (PID 6502)” will be under [Ports (COM & LPT)].“AnyDATA CDMA USB Serial 2 (NMEA) Device (PID 6502)” will be under [Ports (COM & LPT)].
  9. 9. MBlaze USB Modem (User Manual)9/187. Using MBlaze USB Modem Program7.1 Run and Exit1) To run the MBlaze program, double click on the [MBlaze USB Modem] icon on the Desktop.2) To exit from MBlaze program, Press button on the program7.2 DRC information ViewData Rate Control Information bar indicator.0 kbit < < 300 kbit300 kbit < < 900 kbit900 kbit < < 1.8 Mbit1.8 Mbit < < 3.1 Mbit7.3 Descriptions for each buttonDisplay FunctionDisconnected from the InternetConnected to the InternetRCV/STV ActivationCheck the phone number
  10. 10. MBlaze USB Modem (User Manual)10/18Check the balanceSetup MenuHelp Menu7.4 Descriptions for each iconDisplay FunctionRSSI Signal Strength IndicatorOnly 1X mode availableHybrid mode availableBroadband setting is chosen, and Broadband network is availableUSB connectedRoamingConnected to the ModemEither the cable is disconnected to the modemOr improper port connection.Internet connectedInternet disconnected
  11. 11. MBlaze USB Modem (User Manual)11/187.5 Setting MenuThere are 4 sub-menus for setting.To change the value, check wanted item box to confirm and then press button to save it to memory.1) [About]: Version information3) [Basic]: Configurations for internet connection
  12. 12. MBlaze USB Modem (User Manual)12/18Service Number User Name Password#777 internet@internet.mtsindia.in MTS4) [Advance]: Operating network- This is very important parameter, it is strongly recommended to keep the default values.- Hybrid: The modem latches with CDMA Broadband network. If at some point of time, thebroadband signals are not available, the modem falls back to CDMA 1x signals withoutinterruption.- Broadband: The modem latches with CDMA Broadband network. If at some point of time, thebroadband signals are not available, the modem disconnects and needs manual connection again.- 1x: The modem latches with CDMA 1x network. If at some point of time, the 1x signals are notavailable, the modem disconnects and needs manual connection again.
  13. 13. MBlaze USB Modem (User Manual)13/185) [User]: Display options- Always Top: The program window will be displayed on the top of all other open applications.7.6 Connecting and Disconnecting the Internet1) Press button for internet connection.If connection succeeds, icon will appear. If failed to connect, icon will appear.2) Press button to disconnect the internet
  14. 14. MBlaze USB Modem (User Manual)14/187.7 Get Phone Number MenuPress button to check your phone number. After receiving your message, the system will sendback a short message with confirmation of successful recharge.<Remark>:Theses functions can be used only when 1x or Hybrid mode is selected in settings.7.8 Get Balance MenuPress button to check your balance. After receiving your message, the system will send back ashort message with confirmation of successful recharge.
  15. 15. MBlaze USB Modem (User Manual)15/18<Remark>:Theses functions can be used only when 1x or Hybrid mode is selected in settings.7.9 RCV / STV Activation MenuPress button to enter the RCV or STV activation interface, which prompts you to enter a 16 digit Pin code and click “OK” button to recharge. After receiving your message, the system will send back a short message with confirmation of successful recharge.
  16. 16. MBlaze USB Modem (User Manual)16/18<Remark>:Theses functions can be used only when 1x or Hybrid mode is selected in settings.7.10 Help MenuClick on the icon to open the User Manual.For offline viewing, click on Start>All Programs>MBlaze USB Modem>User Manual ADU-555C
  17. 17. MBlaze USB Modem (User Manual)17/18<Remark>:The latest MBlaze software can be downloaded from MTS web site (www.mtsindia.in/mblaze).Before proceeding for a fresh installation, please Uninstall the MBlaze / MBrowse application if already installed. Preferred way for complete uninstall is to choose “Uninstall” from the All Programs listing in Start Menu. Other option is through control panel.8. TroubleshootingQ: I cannot connect to the Internet?A: Please check User name, Password and Service number on the [Setting] menu.Q: The Internet connection is poor and frequently it gets disconnected.A: The CDMA frequency is at unstable state. Try to move to a different place then use it again. Also, ifyou touch or block the USB modem with hand/body contact, the modem connection speed degrades.Please be careful not to touch the modem with your hand or any part of the body. You may use good-quality USB extension cable to connect modem to the PC/laptop in poor signal or very highinterference areas.Q: After the installation of the program, the program does not run and displays followingmessage
  18. 18. MBlaze USB Modem (User Manual)18/18A: This means that USB modem and the computer are not connected properly OR the Slider switch onthe modem is not in Modem position. Please double check.Q: During the running of the program, following message appears and the program halts.A: The actual connection of USB modem and computer has been disconnected. Please check whetherthe cable is dismounted, cable is disconnected or USB modem power has been turned off. Then try toreconnect the modem.Q: The program has ended but the USB modem power is turned off.A: The power of USB modem is not controlled by the program. The point USB modem turns onautomatically is when USB is connected to the PC/Notebook.Q: MBlaze USB Modem program displays “DB xxxx Error” message and terminates.A: MBlaze USB Modem program uses mdb format type of database file. This type of format ispreinstalled when using Windows XP, Windows 2000 OS in a computer. However, this type ofdatabase file has been removed by some other program.Need to update following two (2) files from Microsoft site:1. MDAC: <http://www.microsoft.com/downloads/details.aspx?FamilyID=6c050fe3-c795-4b7d-b037-185d0506396c&DisplayLang=en>2. Jet Engine 4.0:http://www.microsoft.com/downloads/details.aspx?FamilyID=2deddec4-350e-4cd0-a12a-d7f70a153156&DisplayLang=en

×