How do i enable power over ethernet on a cisco 3560
How to Save a Cisco 3560 Switch Configuration
Cisco Catalyst switches can be configured using a number of different utilities. The most
common way to configure a Cisco Catalyst switch, such as the Catalyst 3560, is using
the command line interface (CLI) provided with the switch. When typing configuration
commands into the switch, all configurations are held in active memory on the switch, but
are not saved to the startup configuration until the command to save the configuration to
flash is issued.
1 Click the Windows icon in the lower left corner of the desktop, then click “Programs”
and click “Accessories.” Right-click the command line icon in the menu that appears, and
then click “Run as Administrator.” The command line window will appear.
2 Type “telnet x.x.x.x” on the command prompt, replacing the “x.x.x.x” with the IP address
of the Cisco Catalyst 3560 switch, and then press "Enter.”
100% Free Cloud Storage
Store Your Files In The Cloud. Access Files Anywhere, Anytime.
3 Type the telnet access password when requested on the command prompt and press
4 Type “enable” on the command line and press “Enter.” Type the Privileged Exec
password on the command prompt when requested and press “Enter.”
5 Type “write memory” on the command line and press "Enter.” The running configuration
stored in the switch memory has now been saved to the startup configuration in the flash
memory of the Cisco 3560X switch.
—Original resource from
3Anetwork.com is a world leading Cisco networking products wholesaler, we wholesale
original new Cisco networking equipments, including Cisco Catalyst switches, Cisco
routers, Cisco firewalls, Cisco wireless products, Cisco modules and interface cards
products at competitive price and ship to worldwide.
Our website: http://www.3anetwork.com
Address: 23/F Lucky Plaza, 315-321 Lockhart Road, Wanchai, Hongkong