SlideShare a Scribd company logo
1 of 23
Download to read offline
Service Repair Manual
Models
140H Motor Grader
Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140H MOTOR GRADER CCA
Configuration: 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine
Disassembly and Assembly
12H, 140H and 160H Motor Graders Machine Systems
Media Number -RENR4124-06 Publication Date -01/09/2007 Date Updated -24/09/2007
i01906940
Piston Pump (Hydraulic Fan) - Assemble
SMCS - 1387-016-QP; 5070-016-HFN
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Quantity
A 1P-1857 Retaining Ring Pliers 1
C 1P-0510 Driver Group 1
D 8T-5096 Dial Indicator Gp 1
E 6V-2055 Grease 1
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
1/18
140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB...
2020/2/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Note: Many times, the installation of new parts is not necessary. The installation of used parts
during reconditioning is acceptable. Used parts can result in a substantial cost reduction. Reusable
information is available on piston pumps and motors. Refer to Special Publication, SEBF8032,
"Guideline For Reusable Parts - Piston Pumps and Motors". During reconditioning, correct any
conditions that might have caused the original failure.
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will help to prevent dirt from entering the internal
mechanism. Dirt and contaminants can damage precision components that are in pumps and
motors. All disassembly and assembly procedures must be performed on a clean work surface.
Clean all the interior components in clean solvent. Dry all the interior components with
compressed air. Plug ports and plug hoses on the machine during repair.
1. Check all of the O-ring seals and the components for wear or damage. Replace the
components, if necessary.
2. Lubricate all of the O-ring seals lightly with the lubricant that is being sealed.
Illustration 1 g00993404
3. Install plug (68) and the O-ring seal.
2/18
140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB...
2020/2/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 2 g00993403
Illustration 3 g00822750
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
3/18
140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB...
2020/2/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Install disc (67) and spring (66) into barrel (57) .
5. Install pins (59) into the top of barrel (57).
Note: There are three notches in the top of barrel (57) for pins (59). Place retaining ring (65)
on top of spring (66) .
Illustration 4 g00993401
6. Position barrel (57) in a suitable press, as shown. Use Tooling (C) and the press to compress
spring (66). Use Tooling (A) to install retaining ring (65) .
Illustration 5 g00822984
7. Raise the temperature of bearing cone (64). Install bearing cone (64) on shaft (52) .
4/18
140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB...
2020/2/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 6 g00993397
8. Install seal (63) in housing (39) .
Note: The lip of seal (63) will face INWARD.
9. Use Tooling (A) to install retaining ring (62) .
Illustration 7 g00993515
10. Use Tooling (C) to install bearing cup (61) in housing (39) .
Note: Bearing cup (61) must be fully seated in order to allow proper assembly of the pump.
5/18
140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB...
2020/2/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 8 g00993396
11. Install two bearing sleeves (60) in housing (39) .
Note: Each bearing sleeve (60) contains a notch in the bearing. This notch must be installed
in the corresponding notch in housing (39) .
Illustration 9 g00993395
12. Install retainer (58) on three pins (59) on barrel (57) .
6/18
140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB...
2020/2/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 10 g00823281
13. Install pistons (55) in reaction plate (56) .
14. Install pistons (55) and reaction plate (56) as a unit into barrel (57) .
Note: Pistons (55) must be installed into the original cylinder.
Illustration 11 g00821893
15. Install swashplate (53) onto shaft (52) .
16. Install rotating assembly (54) onto shaft (52) .
Illustration 12 g00821821
17. Install shaft (52), swashplate (53), and rotating assembly (54) into housing (39) as a unit.
Note: Orient swashplate (53) to the proper position for correct installation.
7/18
140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB...
2020/2/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 13 g00993393
18. Move the pump to the vertical position.
19. Install control piston (49) onto swashplate (53) .
20. Install spring (48) onto swashplate (53) .
21. Install O-ring (50) on housing (39) .
Note: Do not install any shims at this time.
22. Install bearing (47) on the end of the shaft.
Note: Bearing (47) is a slip fit. The bearing will not require tooling for installation.
8/18
140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB...
2020/2/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 14 g00821540
23. Install pin (45) in head (38) .
24. Install spacer (44) in head (38) .
25. Use Tooling (C) to install bearing cup (43) .
Note: Bearing cup (43) must be fully seated against spacer (44) .
Illustration 15 g00993392
9/18
140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB...
2020/2/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Install piston guide (42) into head (38). For the correct torque, refer to Specifications,
"Piston Pump (Hydraulic Fan)".
27. Install plunger guide (41) into head (38). For the correct torque, refer to Specifications,
"Piston Pump (Hydraulic Fan)".
28. Install O-ring seals (40) into head (38) .
Illustration 16 g00824086
29. Install port plate (51) on head (38) .
Note: Port plate (51) contains a notch. Pin (45) must fit in the notch.
Note: Use Tooling (E) in order to secure the port plate to the head assembly during
assembly.
Illustration 17 g00993391
30. Install head (38) onto housing (39) .
31. Secure head (38) with socket head bolts (37) .
10/18
140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(S...
2020/2/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 18 g00824206
32. Move the assembled pump to the vertical position with shaft (52) upward.
Illustration 19 g00823712
11/18
140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(S...
2020/2/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 20 g00993510
33. Use Tooling (D) to determine the vertical movement of shaft (52). This measurement is
Dimension (X) .
Illustration 21 g00824208
34. Use a micrometer to measure the thickness of a new shim (46). This measurement is
Dimension (Y) .
35. Subtract Dimension (Y) from Dimension (X). This measurement is Dimension (Z).
36. Dimension (Z) must be 0.05 mm (0.0020 inch).
37. Adjust the thickness of shim (46) to Dimension (Z) .
12/18
140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(S...
2020/2/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 22 g00993391
38. Remove socket head bolts (37). Remove head (38) from pump housing (39) .
Illustration 23 g00824045
39. Remove bearing cone (47) from the shaft.
Note: Bearing cone (47) is a slip fit.
40. Install the proper shim (46) on the shaft.
41. Install bearing cone (47) on the shaft on top of shim (46) .
13/18
140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(S...
2020/2/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 24 g00993500
42. Install port plate (51) on head (38) .
Note: Port plate (51) contains a notch. Pin (45) must fit in the notch.
Note: Use Tooling (E) in order to secure the port plate to the head assembly during
assembly.
Illustration 25 g00993391
43. Install head (38) onto housing (39) .
44. Secure head (38) with socket head bolts (37) .
14/18
140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(S...
2020/2/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 26 g00993510
45. Install Tooling (D) for a second time.
46. Check the pump shaft for the proper measurement.
Illustration 27 g00993388
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
47. Install seal (31) on plug (30). Install plug (31) into pressure and flow compensator valve
(7) .
48. Install valve stem (32) into the pressure and flow compensator valve (7). Install spring
retainer (33), spring (34), spring (35), and seat (36) into pressure and flow compensator
valve (7) .
15/18
140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(S...
2020/2/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
49. Install O-ring seal (23) onto plug (24). Install plug (24) onto pressure and flow compensator
valve (7) .
50. Install seal (25) on adjustment nut (26). Install adjustment screw (27) into plug (24). Install
seal (28) onto cap nut (29) and onto adjustment screw (27) .
Illustration 28 g00993386
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
51. Install seal (18) on plug (17). Install plug (17) into pressure and flow compensator valve
(7) .
52. Install valve stem (9) into the pressure and flow compensator valve (7). Install spring
retainer (10), spring (11), spring (12), and seat (19) into pressure and flow compensator
valve (7) .
53. Install seal (20) onto adjustment plug (21). Install adjustment screw (22) into plug (21).
Install seal (13) and adjustment nut (14) onto adjustment screw (22). Install seal (15) onto
cap nut (16).
16/18
140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(S...
2020/2/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 29 g00993385
54. Install O-ring seals on pressure and flow compensator valve (7) .
Illustration 30 g00993383
55. Install pressure and flow compensator valve (7) on the pump. Secure the pressure and flow
compensator valve (7) with bolts (6) .
Illustration 31 g00993381
17/18
140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(S...
2020/2/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
56. Install manifold (5). Secure manifold (5) with bolts (4) .
57. Install manifold (3). Secure manifold (3) with bolts (2) .
58. Install tube assembly (1) .
Note: The correct priming and break-in procedures should always be used, when the parts
of the rotating group have been rebuilt or replaced. The break-in procedure is important
because improper break-in will result in failures after minimal hours of the pumps and of
the motors. Improper break-in procedures leave little evidence about the failure. Prime a
rebuilt pump or a rebuilt motor.
Note: Abrasive particles must be removed from the hydraulic system. Contamination is a
frequent cause of pump failures. Pump failures are often due to improper flushing
techniques from a previous failure.
Note: Once all contaminants have been thoroughly flushed from the system, a baseline SOS
analysis must be completed. Refer to Special Instruction, SEBF3116 for information on oil
sampling. The SOS oil sample is used to determine the size and the quantity of the
contaminants. Particle count is the recommended method for particle detection.
End By: Install the piston pump (Hydraulic fan). Refer to Disassembly and Assembly, "Piston
Pump (Hydraulic Fan) - Install ".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Feb 14 14:55:11 UTC+0800 2020
18/18
140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(S...
2020/2/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140H MOTOR GRADER CCA
Configuration: 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine
Disassembly and Assembly
12H, 140H and 160H Motor Graders Machine Systems
Media Number -RENR4124-06 Publication Date -01/09/2007 Date Updated -24/09/2007
i01945000
Piston Pump (Hydraulic Fan) - Install
SMCS - 1387-012-QP; 5070-012-HFN
Installation Procedure
Illustration 1 g01012338
1/5
140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB...
2020/2/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
1. Use two people and install pump assembly (19). The weight of pump assembly (19) is
approximately 30 kg (65 lb).
2. Install bolts (20). Tighten bolts (20) to a torque of 100 ± 20 N·m (74 ± 15 lb ft). Slide pump
assembly (19) to the front of the machine.
Illustration 2 g01012334
3. Install bolts (18). Tighten bolts (18) to a torque of 105 ± 20 N·m (77 ± 15 lb ft). Repeat this
step for the opposite side of the machine.
2/5
140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB...
2020/2/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 3 g01012300
Illustration 4 g01012304
4. Position elbow (17) to the original location. Install bolts (16). Tighten bolts (16) to a torque
of 100 ± 20 N·m (74 ± 15 lb ft).
3/5
140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB...
2020/2/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

More Related Content

Similar to Caterpillar Cat 140H Motor Grader (Prefix CCA) Service Repair Manual (CCA00001 and up).pdf

Caterpillar cat 140 h motor grader (prefix cca) service repair manual (cca000...
Caterpillar cat 140 h motor grader (prefix cca) service repair manual (cca000...Caterpillar cat 140 h motor grader (prefix cca) service repair manual (cca000...
Caterpillar cat 140 h motor grader (prefix cca) service repair manual (cca000...fusjejfskekem
 
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual (ARL0000...
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual (ARL0000...Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual (ARL0000...
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual (ARL0000...udjkdksmmd
 
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...fjsekksmemm
 
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...idksmmdmdm
 
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...jkdkkdsmmd
 
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...hean57759707
 
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...fjjskekdmem
 
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...fhsejkdkme
 
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...ufjsjekfksemm
 
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...dujfjjksekmmd
 
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...fusjjefjskeksmem
 
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...fjsekkxszdmmem
 

Similar to Caterpillar Cat 140H Motor Grader (Prefix CCA) Service Repair Manual (CCA00001 and up).pdf (12)

Caterpillar cat 140 h motor grader (prefix cca) service repair manual (cca000...
Caterpillar cat 140 h motor grader (prefix cca) service repair manual (cca000...Caterpillar cat 140 h motor grader (prefix cca) service repair manual (cca000...
Caterpillar cat 140 h motor grader (prefix cca) service repair manual (cca000...
 
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual (ARL0000...
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual (ARL0000...Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual (ARL0000...
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual (ARL0000...
 
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
 
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...
 
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...
 
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...
Caterpillar Cat 163H Motor Grader (Prefix ARL) Service Repair Manual Instant ...
 
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
 
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
 
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
 
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
 
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
 
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
Caterpillar cat 163 h motor grader (prefix arl) service repair manual (arl000...
 

More from rong74gou

Caterpillar Cat M318D Wheeled Excavator (Prefix P8L) Service Repair Manual (P...
Caterpillar Cat M318D Wheeled Excavator (Prefix P8L) Service Repair Manual (P...Caterpillar Cat M318D Wheeled Excavator (Prefix P8L) Service Repair Manual (P...
Caterpillar Cat M318D Wheeled Excavator (Prefix P8L) Service Repair Manual (P...rong74gou
 
Caterpillar Cat 966H Wheel Loader (Prefix A6D) Service Repair Manual (A6D0000...
Caterpillar Cat 966H Wheel Loader (Prefix A6D) Service Repair Manual (A6D0000...Caterpillar Cat 966H Wheel Loader (Prefix A6D) Service Repair Manual (A6D0000...
Caterpillar Cat 966H Wheel Loader (Prefix A6D) Service Repair Manual (A6D0000...rong74gou
 
Caterpillar Cat 938G WHEEL LOADER (Prefix 9HS) Service Repair Manual (9HS0000...
Caterpillar Cat 938G WHEEL LOADER (Prefix 9HS) Service Repair Manual (9HS0000...Caterpillar Cat 938G WHEEL LOADER (Prefix 9HS) Service Repair Manual (9HS0000...
Caterpillar Cat 938G WHEEL LOADER (Prefix 9HS) Service Repair Manual (9HS0000...rong74gou
 
Caterpillar Cat 730C2 Articulated Truck (Prefix 2T4) Service Repair Manual (2...
Caterpillar Cat 730C2 Articulated Truck (Prefix 2T4) Service Repair Manual (2...Caterpillar Cat 730C2 Articulated Truck (Prefix 2T4) Service Repair Manual (2...
Caterpillar Cat 730C2 Articulated Truck (Prefix 2T4) Service Repair Manual (2...rong74gou
 
Caterpillar Cat 730 Articulated Truck (Prefix 3T3) Service Repair Manual (3T3...
Caterpillar Cat 730 Articulated Truck (Prefix 3T3) Service Repair Manual (3T3...Caterpillar Cat 730 Articulated Truck (Prefix 3T3) Service Repair Manual (3T3...
Caterpillar Cat 730 Articulated Truck (Prefix 3T3) Service Repair Manual (3T3...rong74gou
 
Caterpillar Cat 442D Backhoe Loader (Prefix BRG) Service Repair Manual (BRG00...
Caterpillar Cat 442D Backhoe Loader (Prefix BRG) Service Repair Manual (BRG00...Caterpillar Cat 442D Backhoe Loader (Prefix BRG) Service Repair Manual (BRG00...
Caterpillar Cat 442D Backhoe Loader (Prefix BRG) Service Repair Manual (BRG00...rong74gou
 
Caterpillar Cat 436B BACKHOE LOADER (Prefix 6MJ) Service Repair Manual (6MJ00...
Caterpillar Cat 436B BACKHOE LOADER (Prefix 6MJ) Service Repair Manual (6MJ00...Caterpillar Cat 436B BACKHOE LOADER (Prefix 6MJ) Service Repair Manual (6MJ00...
Caterpillar Cat 436B BACKHOE LOADER (Prefix 6MJ) Service Repair Manual (6MJ00...rong74gou
 
Caterpillar Cat 430F2 Backhoe Loader (Prefix LYD) Service Repair Manual (LYD0...
Caterpillar Cat 430F2 Backhoe Loader (Prefix LYD) Service Repair Manual (LYD0...Caterpillar Cat 430F2 Backhoe Loader (Prefix LYD) Service Repair Manual (LYD0...
Caterpillar Cat 430F2 Backhoe Loader (Prefix LYD) Service Repair Manual (LYD0...rong74gou
 
Caterpillar Cat 430F2 Backhoe Loader (Prefix HWG) Service Repair Manual (HWG0...
Caterpillar Cat 430F2 Backhoe Loader (Prefix HWG) Service Repair Manual (HWG0...Caterpillar Cat 430F2 Backhoe Loader (Prefix HWG) Service Repair Manual (HWG0...
Caterpillar Cat 430F2 Backhoe Loader (Prefix HWG) Service Repair Manual (HWG0...rong74gou
 
Caterpillar Cat 430F Backhoe Loader (Prefix RGS) Service Repair Manual (RGS00...
Caterpillar Cat 430F Backhoe Loader (Prefix RGS) Service Repair Manual (RGS00...Caterpillar Cat 430F Backhoe Loader (Prefix RGS) Service Repair Manual (RGS00...
Caterpillar Cat 430F Backhoe Loader (Prefix RGS) Service Repair Manual (RGS00...rong74gou
 
Caterpillar Cat 430F Backhoe Loader (Prefix RDF) Service Repair Manual (RDF00...
Caterpillar Cat 430F Backhoe Loader (Prefix RDF) Service Repair Manual (RDF00...Caterpillar Cat 430F Backhoe Loader (Prefix RDF) Service Repair Manual (RDF00...
Caterpillar Cat 430F Backhoe Loader (Prefix RDF) Service Repair Manual (RDF00...rong74gou
 
Caterpillar Cat 430F Backhoe Loader (Prefix LNH) Service Repair Manual (LNH00...
Caterpillar Cat 430F Backhoe Loader (Prefix LNH) Service Repair Manual (LNH00...Caterpillar Cat 430F Backhoe Loader (Prefix LNH) Service Repair Manual (LNH00...
Caterpillar Cat 430F Backhoe Loader (Prefix LNH) Service Repair Manual (LNH00...rong74gou
 
Caterpillar Cat 426C Backhoe Loader (Prefix 1NR) Service Repair Manual (1NR01...
Caterpillar Cat 426C Backhoe Loader (Prefix 1NR) Service Repair Manual (1NR01...Caterpillar Cat 426C Backhoe Loader (Prefix 1NR) Service Repair Manual (1NR01...
Caterpillar Cat 426C Backhoe Loader (Prefix 1NR) Service Repair Manual (1NR01...rong74gou
 
Caterpillar Cat 426C Backhoe Loader (Prefix 1ER) Service Repair Manual (1ER00...
Caterpillar Cat 426C Backhoe Loader (Prefix 1ER) Service Repair Manual (1ER00...Caterpillar Cat 426C Backhoe Loader (Prefix 1ER) Service Repair Manual (1ER00...
Caterpillar Cat 426C Backhoe Loader (Prefix 1ER) Service Repair Manual (1ER00...rong74gou
 
Caterpillar Cat 420F2 BACKHOE LOADER (Prefix NSB) Service Repair Manual (NSB0...
Caterpillar Cat 420F2 BACKHOE LOADER (Prefix NSB) Service Repair Manual (NSB0...Caterpillar Cat 420F2 BACKHOE LOADER (Prefix NSB) Service Repair Manual (NSB0...
Caterpillar Cat 420F2 BACKHOE LOADER (Prefix NSB) Service Repair Manual (NSB0...rong74gou
 
Caterpillar Cat 420F2 Backhoe Loader (Prefix LYC) Service Repair Manual (LYC0...
Caterpillar Cat 420F2 Backhoe Loader (Prefix LYC) Service Repair Manual (LYC0...Caterpillar Cat 420F2 Backhoe Loader (Prefix LYC) Service Repair Manual (LYC0...
Caterpillar Cat 420F2 Backhoe Loader (Prefix LYC) Service Repair Manual (LYC0...rong74gou
 
Caterpillar Cat 420F2 Backhoe Loader (Prefix LBS) Service Repair Manual (LBS0...
Caterpillar Cat 420F2 Backhoe Loader (Prefix LBS) Service Repair Manual (LBS0...Caterpillar Cat 420F2 Backhoe Loader (Prefix LBS) Service Repair Manual (LBS0...
Caterpillar Cat 420F2 Backhoe Loader (Prefix LBS) Service Repair Manual (LBS0...rong74gou
 
Caterpillar Cat 320D2 L Excavator (Prefix YBK) Service Repair Manual (YBK0000...
Caterpillar Cat 320D2 L Excavator (Prefix YBK) Service Repair Manual (YBK0000...Caterpillar Cat 320D2 L Excavator (Prefix YBK) Service Repair Manual (YBK0000...
Caterpillar Cat 320D2 L Excavator (Prefix YBK) Service Repair Manual (YBK0000...rong74gou
 
Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual (YBK00001 ...
Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual (YBK00001 ...Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual (YBK00001 ...
Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual (YBK00001 ...rong74gou
 
Caterpillar Cat 305.5E Mini Hydraulic Excavator (Prefix MX5) Service Repair M...
Caterpillar Cat 305.5E Mini Hydraulic Excavator (Prefix MX5) Service Repair M...Caterpillar Cat 305.5E Mini Hydraulic Excavator (Prefix MX5) Service Repair M...
Caterpillar Cat 305.5E Mini Hydraulic Excavator (Prefix MX5) Service Repair M...rong74gou
 

More from rong74gou (20)

Caterpillar Cat M318D Wheeled Excavator (Prefix P8L) Service Repair Manual (P...
Caterpillar Cat M318D Wheeled Excavator (Prefix P8L) Service Repair Manual (P...Caterpillar Cat M318D Wheeled Excavator (Prefix P8L) Service Repair Manual (P...
Caterpillar Cat M318D Wheeled Excavator (Prefix P8L) Service Repair Manual (P...
 
Caterpillar Cat 966H Wheel Loader (Prefix A6D) Service Repair Manual (A6D0000...
Caterpillar Cat 966H Wheel Loader (Prefix A6D) Service Repair Manual (A6D0000...Caterpillar Cat 966H Wheel Loader (Prefix A6D) Service Repair Manual (A6D0000...
Caterpillar Cat 966H Wheel Loader (Prefix A6D) Service Repair Manual (A6D0000...
 
Caterpillar Cat 938G WHEEL LOADER (Prefix 9HS) Service Repair Manual (9HS0000...
Caterpillar Cat 938G WHEEL LOADER (Prefix 9HS) Service Repair Manual (9HS0000...Caterpillar Cat 938G WHEEL LOADER (Prefix 9HS) Service Repair Manual (9HS0000...
Caterpillar Cat 938G WHEEL LOADER (Prefix 9HS) Service Repair Manual (9HS0000...
 
Caterpillar Cat 730C2 Articulated Truck (Prefix 2T4) Service Repair Manual (2...
Caterpillar Cat 730C2 Articulated Truck (Prefix 2T4) Service Repair Manual (2...Caterpillar Cat 730C2 Articulated Truck (Prefix 2T4) Service Repair Manual (2...
Caterpillar Cat 730C2 Articulated Truck (Prefix 2T4) Service Repair Manual (2...
 
Caterpillar Cat 730 Articulated Truck (Prefix 3T3) Service Repair Manual (3T3...
Caterpillar Cat 730 Articulated Truck (Prefix 3T3) Service Repair Manual (3T3...Caterpillar Cat 730 Articulated Truck (Prefix 3T3) Service Repair Manual (3T3...
Caterpillar Cat 730 Articulated Truck (Prefix 3T3) Service Repair Manual (3T3...
 
Caterpillar Cat 442D Backhoe Loader (Prefix BRG) Service Repair Manual (BRG00...
Caterpillar Cat 442D Backhoe Loader (Prefix BRG) Service Repair Manual (BRG00...Caterpillar Cat 442D Backhoe Loader (Prefix BRG) Service Repair Manual (BRG00...
Caterpillar Cat 442D Backhoe Loader (Prefix BRG) Service Repair Manual (BRG00...
 
Caterpillar Cat 436B BACKHOE LOADER (Prefix 6MJ) Service Repair Manual (6MJ00...
Caterpillar Cat 436B BACKHOE LOADER (Prefix 6MJ) Service Repair Manual (6MJ00...Caterpillar Cat 436B BACKHOE LOADER (Prefix 6MJ) Service Repair Manual (6MJ00...
Caterpillar Cat 436B BACKHOE LOADER (Prefix 6MJ) Service Repair Manual (6MJ00...
 
Caterpillar Cat 430F2 Backhoe Loader (Prefix LYD) Service Repair Manual (LYD0...
Caterpillar Cat 430F2 Backhoe Loader (Prefix LYD) Service Repair Manual (LYD0...Caterpillar Cat 430F2 Backhoe Loader (Prefix LYD) Service Repair Manual (LYD0...
Caterpillar Cat 430F2 Backhoe Loader (Prefix LYD) Service Repair Manual (LYD0...
 
Caterpillar Cat 430F2 Backhoe Loader (Prefix HWG) Service Repair Manual (HWG0...
Caterpillar Cat 430F2 Backhoe Loader (Prefix HWG) Service Repair Manual (HWG0...Caterpillar Cat 430F2 Backhoe Loader (Prefix HWG) Service Repair Manual (HWG0...
Caterpillar Cat 430F2 Backhoe Loader (Prefix HWG) Service Repair Manual (HWG0...
 
Caterpillar Cat 430F Backhoe Loader (Prefix RGS) Service Repair Manual (RGS00...
Caterpillar Cat 430F Backhoe Loader (Prefix RGS) Service Repair Manual (RGS00...Caterpillar Cat 430F Backhoe Loader (Prefix RGS) Service Repair Manual (RGS00...
Caterpillar Cat 430F Backhoe Loader (Prefix RGS) Service Repair Manual (RGS00...
 
Caterpillar Cat 430F Backhoe Loader (Prefix RDF) Service Repair Manual (RDF00...
Caterpillar Cat 430F Backhoe Loader (Prefix RDF) Service Repair Manual (RDF00...Caterpillar Cat 430F Backhoe Loader (Prefix RDF) Service Repair Manual (RDF00...
Caterpillar Cat 430F Backhoe Loader (Prefix RDF) Service Repair Manual (RDF00...
 
Caterpillar Cat 430F Backhoe Loader (Prefix LNH) Service Repair Manual (LNH00...
Caterpillar Cat 430F Backhoe Loader (Prefix LNH) Service Repair Manual (LNH00...Caterpillar Cat 430F Backhoe Loader (Prefix LNH) Service Repair Manual (LNH00...
Caterpillar Cat 430F Backhoe Loader (Prefix LNH) Service Repair Manual (LNH00...
 
Caterpillar Cat 426C Backhoe Loader (Prefix 1NR) Service Repair Manual (1NR01...
Caterpillar Cat 426C Backhoe Loader (Prefix 1NR) Service Repair Manual (1NR01...Caterpillar Cat 426C Backhoe Loader (Prefix 1NR) Service Repair Manual (1NR01...
Caterpillar Cat 426C Backhoe Loader (Prefix 1NR) Service Repair Manual (1NR01...
 
Caterpillar Cat 426C Backhoe Loader (Prefix 1ER) Service Repair Manual (1ER00...
Caterpillar Cat 426C Backhoe Loader (Prefix 1ER) Service Repair Manual (1ER00...Caterpillar Cat 426C Backhoe Loader (Prefix 1ER) Service Repair Manual (1ER00...
Caterpillar Cat 426C Backhoe Loader (Prefix 1ER) Service Repair Manual (1ER00...
 
Caterpillar Cat 420F2 BACKHOE LOADER (Prefix NSB) Service Repair Manual (NSB0...
Caterpillar Cat 420F2 BACKHOE LOADER (Prefix NSB) Service Repair Manual (NSB0...Caterpillar Cat 420F2 BACKHOE LOADER (Prefix NSB) Service Repair Manual (NSB0...
Caterpillar Cat 420F2 BACKHOE LOADER (Prefix NSB) Service Repair Manual (NSB0...
 
Caterpillar Cat 420F2 Backhoe Loader (Prefix LYC) Service Repair Manual (LYC0...
Caterpillar Cat 420F2 Backhoe Loader (Prefix LYC) Service Repair Manual (LYC0...Caterpillar Cat 420F2 Backhoe Loader (Prefix LYC) Service Repair Manual (LYC0...
Caterpillar Cat 420F2 Backhoe Loader (Prefix LYC) Service Repair Manual (LYC0...
 
Caterpillar Cat 420F2 Backhoe Loader (Prefix LBS) Service Repair Manual (LBS0...
Caterpillar Cat 420F2 Backhoe Loader (Prefix LBS) Service Repair Manual (LBS0...Caterpillar Cat 420F2 Backhoe Loader (Prefix LBS) Service Repair Manual (LBS0...
Caterpillar Cat 420F2 Backhoe Loader (Prefix LBS) Service Repair Manual (LBS0...
 
Caterpillar Cat 320D2 L Excavator (Prefix YBK) Service Repair Manual (YBK0000...
Caterpillar Cat 320D2 L Excavator (Prefix YBK) Service Repair Manual (YBK0000...Caterpillar Cat 320D2 L Excavator (Prefix YBK) Service Repair Manual (YBK0000...
Caterpillar Cat 320D2 L Excavator (Prefix YBK) Service Repair Manual (YBK0000...
 
Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual (YBK00001 ...
Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual (YBK00001 ...Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual (YBK00001 ...
Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual (YBK00001 ...
 
Caterpillar Cat 305.5E Mini Hydraulic Excavator (Prefix MX5) Service Repair M...
Caterpillar Cat 305.5E Mini Hydraulic Excavator (Prefix MX5) Service Repair M...Caterpillar Cat 305.5E Mini Hydraulic Excavator (Prefix MX5) Service Repair M...
Caterpillar Cat 305.5E Mini Hydraulic Excavator (Prefix MX5) Service Repair M...
 

Recently uploaded

Welcome to Auto Know University Orientation
Welcome to Auto Know University OrientationWelcome to Auto Know University Orientation
Welcome to Auto Know University Orientationxlr8sales
 
Pros and cons of buying used fleet vehicles.pptx
Pros and cons of buying used fleet vehicles.pptxPros and cons of buying used fleet vehicles.pptx
Pros and cons of buying used fleet vehicles.pptxjennifermiller8137
 
Mastering Mercedes Engine Care Top Tips for Rowlett, TX Residents
Mastering Mercedes Engine Care Top Tips for Rowlett, TX ResidentsMastering Mercedes Engine Care Top Tips for Rowlett, TX Residents
Mastering Mercedes Engine Care Top Tips for Rowlett, TX ResidentsRowlett Motorwerks
 
怎么办理美国UCONN毕业证康涅狄格大学学位证书一手渠道
怎么办理美国UCONN毕业证康涅狄格大学学位证书一手渠道怎么办理美国UCONN毕业证康涅狄格大学学位证书一手渠道
怎么办理美国UCONN毕业证康涅狄格大学学位证书一手渠道7283h7lh
 
Control-Plan-Training.pptx for the Automotive standard AIAG
Control-Plan-Training.pptx for the Automotive standard AIAGControl-Plan-Training.pptx for the Automotive standard AIAG
Control-Plan-Training.pptx for the Automotive standard AIAGVikrantPawar37
 
Human Resource Practices TATA MOTORS.pdf
Human Resource Practices TATA MOTORS.pdfHuman Resource Practices TATA MOTORS.pdf
Human Resource Practices TATA MOTORS.pdfAditiMishra247289
 
A Comprehensive Exploration of the Components and Parts Found in Diesel Engines
A Comprehensive Exploration of the Components and Parts Found in Diesel EnginesA Comprehensive Exploration of the Components and Parts Found in Diesel Engines
A Comprehensive Exploration of the Components and Parts Found in Diesel EnginesROJANE BERNAS, PhD.
 
ABOUT REGENERATIVE BRAKING SYSTEM ON AUTOMOBILES
ABOUT REGENERATIVE BRAKING SYSTEM ON AUTOMOBILESABOUT REGENERATIVE BRAKING SYSTEM ON AUTOMOBILES
ABOUT REGENERATIVE BRAKING SYSTEM ON AUTOMOBILESsriharshaganjam1
 
Can't Roll Up Your Audi A4 Power Window Let's Uncover the Issue!
Can't Roll Up Your Audi A4 Power Window Let's Uncover the Issue!Can't Roll Up Your Audi A4 Power Window Let's Uncover the Issue!
Can't Roll Up Your Audi A4 Power Window Let's Uncover the Issue!Mint Automotive
 
Lighting the Way Understanding Jaguar Car Check Engine Light Service
Lighting the Way Understanding Jaguar Car Check Engine Light ServiceLighting the Way Understanding Jaguar Car Check Engine Light Service
Lighting the Way Understanding Jaguar Car Check Engine Light ServiceImport Car Center
 

Recently uploaded (10)

Welcome to Auto Know University Orientation
Welcome to Auto Know University OrientationWelcome to Auto Know University Orientation
Welcome to Auto Know University Orientation
 
Pros and cons of buying used fleet vehicles.pptx
Pros and cons of buying used fleet vehicles.pptxPros and cons of buying used fleet vehicles.pptx
Pros and cons of buying used fleet vehicles.pptx
 
Mastering Mercedes Engine Care Top Tips for Rowlett, TX Residents
Mastering Mercedes Engine Care Top Tips for Rowlett, TX ResidentsMastering Mercedes Engine Care Top Tips for Rowlett, TX Residents
Mastering Mercedes Engine Care Top Tips for Rowlett, TX Residents
 
怎么办理美国UCONN毕业证康涅狄格大学学位证书一手渠道
怎么办理美国UCONN毕业证康涅狄格大学学位证书一手渠道怎么办理美国UCONN毕业证康涅狄格大学学位证书一手渠道
怎么办理美国UCONN毕业证康涅狄格大学学位证书一手渠道
 
Control-Plan-Training.pptx for the Automotive standard AIAG
Control-Plan-Training.pptx for the Automotive standard AIAGControl-Plan-Training.pptx for the Automotive standard AIAG
Control-Plan-Training.pptx for the Automotive standard AIAG
 
Human Resource Practices TATA MOTORS.pdf
Human Resource Practices TATA MOTORS.pdfHuman Resource Practices TATA MOTORS.pdf
Human Resource Practices TATA MOTORS.pdf
 
A Comprehensive Exploration of the Components and Parts Found in Diesel Engines
A Comprehensive Exploration of the Components and Parts Found in Diesel EnginesA Comprehensive Exploration of the Components and Parts Found in Diesel Engines
A Comprehensive Exploration of the Components and Parts Found in Diesel Engines
 
ABOUT REGENERATIVE BRAKING SYSTEM ON AUTOMOBILES
ABOUT REGENERATIVE BRAKING SYSTEM ON AUTOMOBILESABOUT REGENERATIVE BRAKING SYSTEM ON AUTOMOBILES
ABOUT REGENERATIVE BRAKING SYSTEM ON AUTOMOBILES
 
Can't Roll Up Your Audi A4 Power Window Let's Uncover the Issue!
Can't Roll Up Your Audi A4 Power Window Let's Uncover the Issue!Can't Roll Up Your Audi A4 Power Window Let's Uncover the Issue!
Can't Roll Up Your Audi A4 Power Window Let's Uncover the Issue!
 
Lighting the Way Understanding Jaguar Car Check Engine Light Service
Lighting the Way Understanding Jaguar Car Check Engine Light ServiceLighting the Way Understanding Jaguar Car Check Engine Light Service
Lighting the Way Understanding Jaguar Car Check Engine Light Service
 

Caterpillar Cat 140H Motor Grader (Prefix CCA) Service Repair Manual (CCA00001 and up).pdf

  • 2. Shutdown SIS Previous Screen Product: MOTOR GRADER Model: 140H MOTOR GRADER CCA Configuration: 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine Disassembly and Assembly 12H, 140H and 160H Motor Graders Machine Systems Media Number -RENR4124-06 Publication Date -01/09/2007 Date Updated -24/09/2007 i01906940 Piston Pump (Hydraulic Fan) - Assemble SMCS - 1387-016-QP; 5070-016-HFN Assembly Procedure Table 1 Required Tools Tool Part Number Part Description Quantity A 1P-1857 Retaining Ring Pliers 1 C 1P-0510 Driver Group 1 D 8T-5096 Dial Indicator Gp 1 E 6V-2055 Grease 1 Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair 1/18 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB... 2020/2/14 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 3. of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. Note: Many times, the installation of new parts is not necessary. The installation of used parts during reconditioning is acceptable. Used parts can result in a substantial cost reduction. Reusable information is available on piston pumps and motors. Refer to Special Publication, SEBF8032, "Guideline For Reusable Parts - Piston Pumps and Motors". During reconditioning, correct any conditions that might have caused the original failure. Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism. Dirt and contaminants can damage precision components that are in pumps and motors. All disassembly and assembly procedures must be performed on a clean work surface. Clean all the interior components in clean solvent. Dry all the interior components with compressed air. Plug ports and plug hoses on the machine during repair. 1. Check all of the O-ring seals and the components for wear or damage. Replace the components, if necessary. 2. Lubricate all of the O-ring seals lightly with the lubricant that is being sealed. Illustration 1 g00993404 3. Install plug (68) and the O-ring seal. 2/18 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB... 2020/2/14 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 4. Illustration 2 g00993403 Illustration 3 g00822750 Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. 3/18 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB... 2020/2/14 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 5. 4. Install disc (67) and spring (66) into barrel (57) . 5. Install pins (59) into the top of barrel (57). Note: There are three notches in the top of barrel (57) for pins (59). Place retaining ring (65) on top of spring (66) . Illustration 4 g00993401 6. Position barrel (57) in a suitable press, as shown. Use Tooling (C) and the press to compress spring (66). Use Tooling (A) to install retaining ring (65) . Illustration 5 g00822984 7. Raise the temperature of bearing cone (64). Install bearing cone (64) on shaft (52) . 4/18 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB... 2020/2/14 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 6. Illustration 6 g00993397 8. Install seal (63) in housing (39) . Note: The lip of seal (63) will face INWARD. 9. Use Tooling (A) to install retaining ring (62) . Illustration 7 g00993515 10. Use Tooling (C) to install bearing cup (61) in housing (39) . Note: Bearing cup (61) must be fully seated in order to allow proper assembly of the pump. 5/18 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB... 2020/2/14 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 7. Illustration 8 g00993396 11. Install two bearing sleeves (60) in housing (39) . Note: Each bearing sleeve (60) contains a notch in the bearing. This notch must be installed in the corresponding notch in housing (39) . Illustration 9 g00993395 12. Install retainer (58) on three pins (59) on barrel (57) . 6/18 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB... 2020/2/14 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 8. Illustration 10 g00823281 13. Install pistons (55) in reaction plate (56) . 14. Install pistons (55) and reaction plate (56) as a unit into barrel (57) . Note: Pistons (55) must be installed into the original cylinder. Illustration 11 g00821893 15. Install swashplate (53) onto shaft (52) . 16. Install rotating assembly (54) onto shaft (52) . Illustration 12 g00821821 17. Install shaft (52), swashplate (53), and rotating assembly (54) into housing (39) as a unit. Note: Orient swashplate (53) to the proper position for correct installation. 7/18 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB... 2020/2/14 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 9. Illustration 13 g00993393 18. Move the pump to the vertical position. 19. Install control piston (49) onto swashplate (53) . 20. Install spring (48) onto swashplate (53) . 21. Install O-ring (50) on housing (39) . Note: Do not install any shims at this time. 22. Install bearing (47) on the end of the shaft. Note: Bearing (47) is a slip fit. The bearing will not require tooling for installation. 8/18 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB... 2020/2/14 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 10. Illustration 14 g00821540 23. Install pin (45) in head (38) . 24. Install spacer (44) in head (38) . 25. Use Tooling (C) to install bearing cup (43) . Note: Bearing cup (43) must be fully seated against spacer (44) . Illustration 15 g00993392 9/18 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB... 2020/2/14 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 11. 26. Install piston guide (42) into head (38). For the correct torque, refer to Specifications, "Piston Pump (Hydraulic Fan)". 27. Install plunger guide (41) into head (38). For the correct torque, refer to Specifications, "Piston Pump (Hydraulic Fan)". 28. Install O-ring seals (40) into head (38) . Illustration 16 g00824086 29. Install port plate (51) on head (38) . Note: Port plate (51) contains a notch. Pin (45) must fit in the notch. Note: Use Tooling (E) in order to secure the port plate to the head assembly during assembly. Illustration 17 g00993391 30. Install head (38) onto housing (39) . 31. Secure head (38) with socket head bolts (37) . 10/18 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(S... 2020/2/14 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 12. Illustration 18 g00824206 32. Move the assembled pump to the vertical position with shaft (52) upward. Illustration 19 g00823712 11/18 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(S... 2020/2/14 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 13. Illustration 20 g00993510 33. Use Tooling (D) to determine the vertical movement of shaft (52). This measurement is Dimension (X) . Illustration 21 g00824208 34. Use a micrometer to measure the thickness of a new shim (46). This measurement is Dimension (Y) . 35. Subtract Dimension (Y) from Dimension (X). This measurement is Dimension (Z). 36. Dimension (Z) must be 0.05 mm (0.0020 inch). 37. Adjust the thickness of shim (46) to Dimension (Z) . 12/18 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(S... 2020/2/14 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 14. Illustration 22 g00993391 38. Remove socket head bolts (37). Remove head (38) from pump housing (39) . Illustration 23 g00824045 39. Remove bearing cone (47) from the shaft. Note: Bearing cone (47) is a slip fit. 40. Install the proper shim (46) on the shaft. 41. Install bearing cone (47) on the shaft on top of shim (46) . 13/18 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(S... 2020/2/14 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 15. Illustration 24 g00993500 42. Install port plate (51) on head (38) . Note: Port plate (51) contains a notch. Pin (45) must fit in the notch. Note: Use Tooling (E) in order to secure the port plate to the head assembly during assembly. Illustration 25 g00993391 43. Install head (38) onto housing (39) . 44. Secure head (38) with socket head bolts (37) . 14/18 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(S... 2020/2/14 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 16. Illustration 26 g00993510 45. Install Tooling (D) for a second time. 46. Check the pump shaft for the proper measurement. Illustration 27 g00993388 Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. 47. Install seal (31) on plug (30). Install plug (31) into pressure and flow compensator valve (7) . 48. Install valve stem (32) into the pressure and flow compensator valve (7). Install spring retainer (33), spring (34), spring (35), and seat (36) into pressure and flow compensator valve (7) . 15/18 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(S... 2020/2/14 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 17. 49. Install O-ring seal (23) onto plug (24). Install plug (24) onto pressure and flow compensator valve (7) . 50. Install seal (25) on adjustment nut (26). Install adjustment screw (27) into plug (24). Install seal (28) onto cap nut (29) and onto adjustment screw (27) . Illustration 28 g00993386 Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. 51. Install seal (18) on plug (17). Install plug (17) into pressure and flow compensator valve (7) . 52. Install valve stem (9) into the pressure and flow compensator valve (7). Install spring retainer (10), spring (11), spring (12), and seat (19) into pressure and flow compensator valve (7) . 53. Install seal (20) onto adjustment plug (21). Install adjustment screw (22) into plug (21). Install seal (13) and adjustment nut (14) onto adjustment screw (22). Install seal (15) onto cap nut (16). 16/18 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(S... 2020/2/14 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 18. Illustration 29 g00993385 54. Install O-ring seals on pressure and flow compensator valve (7) . Illustration 30 g00993383 55. Install pressure and flow compensator valve (7) on the pump. Secure the pressure and flow compensator valve (7) with bolts (6) . Illustration 31 g00993381 17/18 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(S... 2020/2/14 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 19. 56. Install manifold (5). Secure manifold (5) with bolts (4) . 57. Install manifold (3). Secure manifold (3) with bolts (2) . 58. Install tube assembly (1) . Note: The correct priming and break-in procedures should always be used, when the parts of the rotating group have been rebuilt or replaced. The break-in procedure is important because improper break-in will result in failures after minimal hours of the pumps and of the motors. Improper break-in procedures leave little evidence about the failure. Prime a rebuilt pump or a rebuilt motor. Note: Abrasive particles must be removed from the hydraulic system. Contamination is a frequent cause of pump failures. Pump failures are often due to improper flushing techniques from a previous failure. Note: Once all contaminants have been thoroughly flushed from the system, a baseline SOS analysis must be completed. Refer to Special Instruction, SEBF3116 for information on oil sampling. The SOS oil sample is used to determine the size and the quantity of the contaminants. Particle count is the recommended method for particle detection. End By: Install the piston pump (Hydraulic fan). Refer to Disassembly and Assembly, "Piston Pump (Hydraulic Fan) - Install ". Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Fri Feb 14 14:55:11 UTC+0800 2020 18/18 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(S... 2020/2/14 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 20. Thank you very much for your reading. Please Click Here. Then Get COMPLETE MANUAL. NO WAITING NOTE: If there is no response to click on the link above, please download the PDF document first and then click on it.
  • 21. Shutdown SIS Previous Screen Product: MOTOR GRADER Model: 140H MOTOR GRADER CCA Configuration: 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine Disassembly and Assembly 12H, 140H and 160H Motor Graders Machine Systems Media Number -RENR4124-06 Publication Date -01/09/2007 Date Updated -24/09/2007 i01945000 Piston Pump (Hydraulic Fan) - Install SMCS - 1387-012-QP; 5070-012-HFN Installation Procedure Illustration 1 g01012338 1/5 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB... 2020/2/14 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 22. 1. Use two people and install pump assembly (19). The weight of pump assembly (19) is approximately 30 kg (65 lb). 2. Install bolts (20). Tighten bolts (20) to a torque of 100 ± 20 N·m (74 ± 15 lb ft). Slide pump assembly (19) to the front of the machine. Illustration 2 g01012334 3. Install bolts (18). Tighten bolts (18) to a torque of 105 ± 20 N·m (77 ± 15 lb ft). Repeat this step for the opposite side of the machine. 2/5 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB... 2020/2/14 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 23. Illustration 3 g01012300 Illustration 4 g01012304 4. Position elbow (17) to the original location. Install bolts (16). Tighten bolts (16) to a torque of 100 ± 20 N·m (74 ± 15 lb ft). 3/5 140H Motor Grader CCA00001-UP (MACHINE) POWERED BY 3176C Engine(SEB... 2020/2/14 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...