In-Store Promo Equipment

V 1 - 2 0 1 5
In-Store Demonstration & Promotional
Display Equipment Catalogue

Welcome to our In-Store Demonstration / Promoter Specific Display Equipment Catalogue.
The display range contained herein represents elements that are purpose designed for the in-store promotional environment and
their very specific requirements. All elements are designed with ease of use, functionality, affordability, ease of transport and
installation being the key deliverables. We offer many tried and tested solutions that are aimed at fulfilling all in-store demo
requirements. This is in addition to the ever important issue of the units being re-brandable as well as cost effective to
repair, thus extending the units life span and improving their ROI.
All elements shown herein are in their standard, tried and tested format but can be endlessly customised to client specific requirements.
All final unit costs are both specification & volume dependent and thus clients are requested to please send their enquiries and / or
specific briefs to our sales department on info@rocketcreative.co.za. for firm quotations.
Please peruse our range document at your convenience and we are sure you will find something that suits your in-store application !
A critical issue to consider when selecting elements for in-store is that whilst all elements are suitable to be used for an in-store
promotion, NOT all elements can be distributed on public transport. This issue is an important consideration for campaigns and is
often overlooked when selecting a suitable unit. This then tends to impact the physical handling and roll out and then affects
the life span of the equipment.
Elements that we consider to be public transport friendly are identified with the following icon:
Rocket Creative Design & Display I Tel: + 27 ( 11 ) 262 4698 I www.rocketcreative.co.za

Clip On Promo Trays
An original creation borne by the ever increasing competition for in-store dominance, our unique clip-on shelf allows a promoter to effortlessly carry a unit into store, clip
it onto an existing in-store merchandising shelf in 10 seconds and run their promotional activity without hindering foot traffic and causing congestion.
Specifications
• Clip on metal framed mechanism with vacuum formed work surface
• Work surface 500mm(w) x 400mm(d)
• Branding panels supplied separately, mount with velcro
• Supplied in mini carry bag for ease of transport

Micro POP Merchandising FSU (point of purchase support)
Specifications
• Modular plastic sub-structures in white and black as standard
• 350 mm x 350 mm injection molded shelf panels
• Height specific shelf intervals with multiple shelf options
• Printed header panel single side (double sided optional)
• Supplied semi assembled in micro box 360mm x 360mm x 250mm (h)
• Complete unit weighs an incredible 3.6kg
Options
• Coloured structures and shelves in volume
• Printed shelf edge strips and price marking systems
• Clip-on brochure dispensers DL, A5 & A4 optional
Assembled Size: 350mm (l) x 350mm(d) x 1600mm(h)
Packaged Size: 360mm x 360mm x 250mm(h)
Unit Weight: 3.6kg box packaged

Micro Demo Trolley
Specifications
• Ultra lightweight modular sub-structure in white and black as standard
• Plastic injection molded shelves 350mm(w) x 350mm(d) x 900mm(h)
• Printed flex face table graphic banner wrap with velcro attachments
• Unit supplied in kit format and assembles within 5minutes without the need for tools
• Supplied in a micro carry bag (box packaging option extra)
• Complete weigh an incredible 2,3kg !!!!!
Options
• Coloured structures and shelves in volume
• Without castor wheels / as a table
• Box packaging
Assembled Size: 350mm (l) x 350mm x 885 mm (h)
Packaged Size: 800 mm (l) x 400mm (h) mm (h)
Unit Weight: 2.8kg

Demo Trolley / basic
Specifications
• Ultra lightweight and modular plastic sub-structure with push handle
• White vacuum formed work surface 505mm(w) x 405mm(d)
• Digitally printed graphic wraps with Velcro attachments
• Hard wearing injection molded internal shelf at base level
• Lockable metal caster wheels to allow ease of mobility in-store
• Units supplied semi assembled with full 3D ‘how-to’ assembly instructions for tool free assembly
• Supplied in durable carry bags + box packaged for secure distribution
Options
• Work surface graphic overlay to enhance visual effect
• Coloured structures in volume order 200 +
• Coloured work tops in volume orders 200 +
• Additional central shelving levels
• Without castor wheels / as a static table – as per Cheerios image
Assembled Size: 505 mm (l) x 405mm x 885 mm (h)
Packaged Size: 1000mm (l) x 200 mm (d) x 500mm (h)
Unit Weight: 4.6 kg

Demo Trolley – customised applications
Specifications
• Ultra lightweight and modular plastic sub-structure, silver as standard but white, black and colours on request
• Flex face PVC or solid panel graphic wraps with cut outs for product visibility
• Deep bins for ice, liquids etc. for wet demo applications
• Caster wheels for ease of mobility in-store
• Units supplied semi assembled with 3D assembly instructions
• Units assemble in 5 minutes with tool free assembly.
• Supplied with carry bag & box packaged for secure distribution
Options
• Basin type bin with drain plug & catch container
• Coloured structures & shelving
• Additional central levels and customised shelf intervals
• Without castor wheels (for use as a table)
Unit Weight: 5 - 8kg specification dependent
Custom trolley with
3 x deep bins for
wet demo
Custom trolley with basin
vacuum form & drainage
for hand washing demo
Custom trolley accessorised
with mini spinning wheel

Demo Trolley + Perimeter Guide Rail
This trolley option targets the application where clients will be promoting products that may need a support around the perimeter of the trolley to prevent them falling
over , such as warm or hot beverages in bottles, flasks etc.
Specifications
• Lightweight modular plastic sub-structures
• Digitally printed graphic wraps on flex face PVC or solid panel graphic wraps with cut outs for product visibility
• Hard wearing injection molded shelves 505mm(w) x 450mm(d)
• Lockable metal caster wheels for ease of mobility in-store
Options
• Multiple internal shelves to spec requirements
• With flex face PVC or solid panel graphic – solid allow for cutouts
• Coloured sub structures & shelves
• Brochure dispensers – used with solid panels – ala Five Roses
• Without castor wheels – as a table option
Unit Weight: 5,2kg

Demo Trolley + Guide Rail & Rotating AdPost
This trolley option incorporates an additional ‘AdPost’ that adds extra visibility to the trolley base. The unit consists of a double side printed AdPost panel that manually
rotates on the frame provided. The trolley again targets the application where clients will be promoting products that may need a support around the perimeter of the
trolley to prevent them falling over , such as liquids in bottles etc.
Specifications
• Lightweight modular plastic sub-structures in silver, white or black as standard
• Digitally printed graphic wrap & rotating AdPost panel, double sided
• Hard wearing injection molded shelf to 505mm(w) x 450mm(d) dimensions
• Lockable metal caster wheels for ease of mobility in-store
Options
• Multiple internal shelves to height spec requirements
• With flex face PVC or solid panel graphic – solid allow for cutouts
• Custom coloured sub structures & shelves in high volumes
• Clip on brochure dispensers
• Without castor wheels – as a table option
Unit Weight: 5,2kg

Demo Trolley Options
With Header / with bulkhead / with graphic backdrop options
Specifications
• Lightweight modular plastic sub-structures with push handle and header options
• White vacuum formed work surface 505mm(w) x 405mm(d)
• Digitally printed graphic wraps & headers with Velcro attachments
• Hard wearing injection molded internal base shelf as standard
• Lockable metal caster wheels to allow ease of mobility in-store
• Unit supplied semi assembled with 3D assembly instructions
Options
• Work surface graphic overlay to enhance visual effect
• Coloured structures in high volume orders
• Coloured work tops in high volume orders
• Additional central shelving levels
• Without castor wheels / as a static table (as per Sasko image shown)
Unit Weight: 5 - 7kg
Demo Trolley + Header Demo Trolley + Bulkhead Demo Trolley +
Graphic Backdrop

Demo Trolleys & Tables – fully customised fabrication
Our innovative design & manufacturing crew excels in creating ultra original, customised display solutions in response to direct briefs. We thrive in thinking entirely out of the box, yet
remain logical and realistic as to what is achievable with a cost effective, modular unit. We welcome you to challenge us with your custom briefs for your unique applications.
Philips Lighting Demo Trolley
Modular trolley with battery &
inverter powerrng 12 globes for
daily promotional activity.
Supplied with battery charger &
interchangable graphics in a
custom carry bag
Nestle Jogolino Product Replica
‘Yoghurt Tub’ Demo Table
Modular table with angled sides
and solid top with ‘peel back’ lid
effect, with interchangeable
graphics in a custom carry bag
Nestle Dolce Gusto Coffee
Sampling Station / Table Modular
table with custom vacuum
formed work surface for
sampling, with solid contour
curved graphic panels and add
on fabric graphic AdPost,
supplied in a custom carry bag

Demo Trolleys & Tables – fully customised fabrication
Our innovative design & manufacturing crew excels in creating ultra original, customised display solutions in response to direct briefs. We thrive in thinking entirely out of the box, yet
remain logical and realistic as to what is achievable with a cost effective, modular unit. We welcome you to challenge us with your custom briefs for your unique applications.
Energizer In-Store Demo Trolleys
Fully built metal demo trolleys for
permanent application in-store in
Makro’s. Metal substructure +
interchangeable graphics and
brochure dispensers
Pampers Hospital Demo Trolleys
Trolley concept for a portable
baby changing station for new
mothers at hospitals.
Incorporates a work / demo
surface, open and concealed
storage + interchangeable
branding elements for message
changing

Hawkers Table Kit. Custom designed kit for Simba, for distribution to their hawker clientele, comprising a 3
pod interlocking table kit with clip in graphic panels, a custom fold up chip display unit, a fold up stool all
supplied in a custom manufactured, branded carry bag.
Game show plinth with electronic
buzzer button & flashing light
Dorito’s chip shaped
laptop plinth
Demo Tables & Plinths – fully customised fabrication
Our innovative design & manufacturing crew excels in creating ultra original, customised display solutions in response to direct briefs. We thrive in thinking entirely out of the box, yet remain
logical and realistic as to what is achievable with a cost effective, modular unit. We welcome you to challenge us with your custom briefs for your unique applications.

Semi-circular Demo Plinth
Specifications
• Lightweight modular plastic sub-structure
• Lightweight semi circular white vacuum formed work surface 600mm(w) x 350mm (d)
• Flexible solid printed graphic wrap panel with protective over lamination for maximised durability
Options
• Additional central shelving level
• Coloured structures
Assembled Size: 600 mm (l) x 350mm (d) x 885 mm (h)
Unit Weight: 4kg

Eclipse Demo Trolley
Specifications
• Lightweight modular plastic structure with curved front aesthetic
• Lightweight vacuum formed work surface with insert for customised product placement functionality
• Flexible solid printed graphic wrap panel with protective over lamination for maximised durability
• Metal lockable caster wheels for ease of mobility in-store
Options
• Additional rotating Ad Post for extra branding
• Additional central shelving levels for product storage
Packaged Size: 970 mm (l) x 200 mm (d) x 560mm (h)
Unit Weight: 9kg

MidiLITE Elliptical Plinth MaxiLITE Elliptical Plinth
DemoLITE Elliptical Plinths
Our industry original elliptical plinth design combines superb aesthetics with innovative manufacture, delivering a blue chip appeal with ultra user friendly ease of use. This upmarket
unit has become a firm favorite of some of the industries leading brands. Our revolutionary design innovation allows an ultra light unit and the complete MidiLITE unit weighs in at an
astounding 4.6kg and the MaxiLiTE at 9,3kg!!!
Specifications
• Ultra lightweight modular plastic sub-structures
• Work surface from lightweight composite materials and fabrication process
• Internal concealed central and base storage shelves for product storage
• Digitally printed, removable graphic wraps with protective over lamination for maximised durability
• Digitally printed work surface claddings with protective over laminate
• Supplied semi-assembled and assembles in 5 minutes without the need for any tools
• Unit supplied in protective carry bags + box packaged for secure distribution
MidiLITE Elliptical Plinth:
Unit Dimensions: 600 mm x 400 mm x 940 mm (h)
Unit Weight: 4.6kg boxed
Packaged Dimensions: 1000 mm x 200 mm x 500 mm (h)
MaxiLITE Elliptical Plinth:
Unit Weight: 10.1kg complete, boxed

Demo Table with / without Header
Specifications
• Lightweight modular plastic sub-structures, silver as standard
• Lightweight vacuum formed work surface 900mm(w) x 420mm(d), white as standard
• Printed graphic wraps with Velcro attachments
Options
• With or with out header panel
• Melamine work surface for hot demo applications
• Optional base and central shelving levels
• Coloured structures in volume
• Caster wheels to provide in-store ease of mobility
Unit Weight: 5kg / 6kg with header

Demo Table + Graphic Backdrop
Specifications
• Printed graphic wraps with Velcro attachments
Options
Assembled Size: 900mm (l) x 420mm (d) x 2065mm (h)
Packaged Size: 1000mm (l) x 200mm (d) x 500mm (h)

Demo Table + Bulkhead
Specifications
• Printed table & header graphic wraps with Velcro attachments
Options
• Sunken bowls, ice buckets etc. for wet demo applications

Demo Table + Branding Wing Kit
Specifications
• Lightweight modular plastic table and wings sub-structures, silver as standard
• Printed table and branding wing graphics with Velcro attachments
Options
Assembled Size: Table: 900mm (l) x 420mm (d) x 2065mm(h)
Wings: 500mm(w) x 2065mm(h)
Packaged Size: 2 boxes, each of 1000mm (l) x 200mm (d) x 500mm (h)
Unit Weight: 9,3kg

Demo Table – customised options
Specifications
• Lightweight modular plastic table and extra sub-structures, silver as standard
• Printed table and extra elements on flex face or solid panels, with Velcro attachments
Options
Assembled Size: Table: 900mm (l) x 420mm (d) x 2065mm(h)
Wings: 500mm(w) x 2065mm(h)
Packaged Size: 2 boxes, each of 1000mm (l) x 200mm (d) x 500mm (h)
Unit Weight: 9,3kg

Mini Eventing Table / + Header
Specifications
• Lightweight modular plastic table & header sub-structures
• Printed flexface graphic wrap & backdrop with Velcro attachments
• Melamine work surface 1100mm(w) x 400mm(d)
• Printed graphic cladding with protective over laminate
Options
• Clip on brochure dispensers (DL / A5 / A4)
• Coloured structures
• Caster wheels
Assembled Size: 915mm (l) x 600mm (d) x 970mm (h)
Unit Weight: 9,6kg with header

Midi Eventing Table / + Header
Specifications
• Lightweight vacuum formed work surface 900mm(w) x 650mm(d)
• Printed flexface graphic wrap & headers with Velcro attachments
• Printed work surface graphic cladding with protective over laminate
Options
• Coloured structures in volume orders
Assembled Size: Table : 915mm (l) x 600mm (d) x 970mm (h)
Table + Header: 915mm(w) x 650mm(d) x 1900mm(h)
Unit Weight: 7kg / 8.5kg with header

Midi Eventing Table + Graphic Backdrop
Specifications
• Lightweight vacuum formed work surface 900mm(w) x 650mm(d)
• Printed flexface graphic wrap & backdrop panels with Velcro attachments
• Printed work surface graphic cladding with protective over laminate
Options
• Coloured structures in volume orders
Assembled Size: Table : 915mm (l) x 600mm (d) x 970mm (h)
Table + Header: 915mm(w) x 650mm(d) x 1900mm(h)
Unit Weight: 7kg / 8.5kg with header

Evo Eventing Table / + Header – new updated 2015 spec
Specifications
• Lightweight modular plastic sub-structure
• Elliptical melamine work surface with printed work surface graphic + protective over lamination
• Printed table & header wraps with Velcro attachments
• New contour cut shelves on central level and base area as standard
Options
• Optional with or without header
• For functional eventing purposes any elements can be sunken into the work surface such as ice buckets, cup holders,
product stands, brochure dispensers etc.
Unit Weight: 17kg with header
Front View Rear View

Stellar Mini Eventing Table / with or without header
This rectangular shaped table with melamine work surface is most suitable for hot demo activity when
utilising heated cookers etc. The melamine surface withstands temperatures and is more stable that the
more lightweight vacuum formed surfaces.
Specifications
• Modular plastic table sub-structure with melamine worktop at 1000mm(w) x 600mm(d)
• Printed table wrap & work surface graphic, Velcro attached
• Internal base and central shelving levels
Options
• Header panel
• Caster wheels for ease of mobility in-activation
For functional eventing purposes any specialised elements can be sunken into the work surface
such as ice buckets, cup holders, product stands, brochure dispensers etc.
Assembled Size: 1000 mm (l) x 600mm (d) x 1000mm (h)
Packaged Size: 1100mm (l) x 180mm (w) x 760mm (h)
Unit Weight: 15kg

Stellar Maxi Eventing Table / with or without header
This rectangular shaped table with melamine work surface is most suitable for activation activity where a more solid work surface is required.
Specifications
• Modular plastic table sub-structure with melamine worktop at 1350mm(w) x 600mm(d)
• Units flat pack for ease of mobility & transport
• Supplied semi assembled with 3D assembly instructions
• Supplied bagged & boxed for secure distribution
Options
• Header panel
• Caster wheels for ease of mobility in-activation
Unit Weight: 19kg

Branded Dump Bin / + Header
Specifications
• Modular plastic sub-structure with dump bin capability
• Size 600 mm x 600 mm x 900 mm
• Interchangeable / replaceable branding capability
• Internal box for product housing
• Supplied fully or semi assembled with assembly instructions
• Supplied bagged & box packaged for secure transport
Options
• Header panel for increased visibility
• Single or double sided header
Incl header @ 2000 mm (h)

Demo Plinth Showcase
Specifications
• Lightweight plastic sub-structures with hollow core
• Melamine tops and base elements
• Clear acrylic lids with mirror screw attachments, 3mm as standard
• Printed graphic wraps / replaceable
• Supplied fully assembled, box packaged for secure distribution
Options
• 5mm lid for increased durability
Unit Size Options:
Mini: 300mm x 300mm x 900mm (h)
Maxi: 300mm x 300mm x 1100mm (h)
Unit Weight: 6,7 kg

Branded Entry Form Boxes
Specifications
• 300mm cubed acrylic boxes with drop slot
• Hinged lockable lid for extracting entry forms
• Digitally printed graphic panel wrap
Options:
• Other customized shape & sizes available upon special order
Standard Size: 300mm (l) x 300 mm x 300mm (h)
Weight: 1.1 kg

Competition Entry Form Box
Specifications
• Lightweight modular plastic sub-structure to 350mm x 350mm x 1300mm(h)
• Function specific vacuum formed lid with drop slot and internal entry form catch bag
• Fully printed graphic wrap and header, single sided
• Supplied either fully or semi assembled, client to specific upon order placement
• Supplied box packaged for secure distribution
Options
• Custom shaped header panels
• Add-on DL or A5 brochure dispensers
Assembled Size: 350mm (l) x 350 mm (d) x 1350mm (h)
Packaged Size: 350mm (l) x 350 mm x 1400mm (h)
Unit Weight: 4,3 kg

Competition Spinning Wheel ( Mini )
Specifications
• Mini activation wheel for counter top application, 600mm in diameter
• Lightweight modular plastic hinged sub-structure, silver as standard
• Printed wheel & arrow sections 600mm diameter
• Supplied semi assembled, boxed packaged for secure distribution
Options
• Additional widget set for individual prize replacement (in event of prizes running out of stock)
Unit Dimensions: 600 mm OD x 750 mm (h)
Unit Weight: 0,8kg

Cocktail Tables
Specifications
• Modular plastic internal sub-structure
• Laser cut metal weighted base plate, silver powder coated
• Digitally printed graphic panel wrap & work surface graphics
• Supplied either fully or semi assembled, client to specific upon order placement
• Can be taken on public transport / only if supplied semi assembled
Unit Weight: 9kg

JelliBean Eventing Table / Trolley
Specifications
• Modular plastic table sub-structure with vacuum formed composite work surface
• Unit mounted with caster wheels for aid in-store mobility
• Units flat pack for ease of mobility & transport
Options
• Header panel
• Without caster wheels – as a fixed table
• For functional eventing purposes any elements can be sunken into the work surface such as ice buckets,
cup holders, product stands, brochure dispensers etc.
Unit Weight: 15kg

Square
400mm x
400mm
Square
600mm x
600mm
Rectangular
400mm x 600mm
Rectangular
400mm x 800mm
Demo Plinth Range / square & rectangular
Specifications
• Lightweight plastic sub-structures
• Melamine work surfaces to range of sizes
• Digitally printed, removable graphic wraps
• Digitally printed work surface claddings with over laminate
• Supplied fully assembled, unless otherwise requested
Options
• Custom sizes made to specification
Unit Dimensions:
Square: 400mm x 400mm x 940 mm (h)
Square: 600mm x 600mm x 940 mm (h)
Rectangular: 600mm x 400mm x 940 mm (h)
Unit Weight:
Square: 400mm x 400mm: 7kg
Square : 600mm x 600mm: 13g
Rectangular ; 600mm x 400mm: 9kg
Rectangular ; 800mm x 400mm: 11.5kg
Rectangular
600mm x 800mm

Demo Plinth + Headers / square & rectangular
Specifications
• Lightweight plastic sub-structures with hollow core
• Melamine work surfaces to range of sizes – see below
• Digitally printed, removable graphic wraps
• Digitally printed work surface claddings with protective over laminate
• Supplied fully assembled, unless otherwise requested
Options
• Cable managers
• IT Security Devices
• Double sided header graphics
Unit Dimensions:
Square: 400mm x 400mm x 940mm (h)
Rectangular: 400mm x 800mm x 940mm (h)
Rectangular: 600mm x 800mm x 940mm (h)
Unit Weight:
Square 400mm x 400mm: 7kg
Square 600mm x 600mm: 13g
Rectangular 600mm x 400mm: 9kg

MidiLITE Elliptical Plinth MaxiLITE Elliptical Plinth
DemoLITE Elliptical Plinths
Our industry leading elliptical plinth design combines superb aesthetics with innovative manufacture, delivering a blue chip appeal with ultra user friendly ease of use and has become a firm favorite of some of
our top FMCG brands. Our revolutionary elliptical manufacturing technique allows for an ultra light finished product. The complete MidiLITE unit weighs in at an astounding 4.6kg and the MaxiLiTE at 9,3kg !!!
Specifications
• Lightweight plastic sub-structures with composite fabrication methodology
• Internal concealed storage shelf for product storage
• Digitally printed graphic wraps, with Velcro fixing
• Digitally printed work surface claddings with durable protective over laminate
• Supplied semi assembled, in protective carry bags with full 3D instructions for tool free assembly
• Supplied in carry bags plus box packaged for secure distribution
MidiLITE Elliptical Plinth:
Unit Weight: 4.6kg boxed
MaxiLITE Elliptical Plinth:
Unit Weight: 10.1kg complete, boxed

Demo Plinths – Tin Product Replica
Specifications
• Modular unit assembles into a product replica tin
• Lightweight modular plastic hollow core sub-structure
• Vacuum formed work-surface mimics the tin top look
• Printed graphic wraps with Velcro attachments – tinned product specific
• Internal shelving level for concealed storage of beverage sampling stock
• Mounted to caster wheels for ease of in-promo movement
• Supplied in modular kit format, with tool free assembly in 5 minutes
• Supplied bagged & boxed, for secure distribution
Unit Weight: 9 kg

Wet Demo Plinths – Product Tin Replica / customised
Specifications
• Lightweight modular unit assembles into a product replica tin with hollow core sub-structure
• Molded vacuum formed work-surface mimics tin top look
• Cut-out for ice bucket and plastic cup dispensers for beverage sampling
• Printed graphic wraps with Velcro attachments – tinned product specific
• Internal shelving level for concealed storage of beverage sampling stock
• Mounted to caster wheels for ease of in-promo movement
• Supplied in modular kit format, with tool free assembly in 5 minutes
• Supplied bagged & boxed, for secure distribution
• Options for push handle only or header + push handle
Unit Weight: 9 kg
Unit with
header
Unit with
header
showing ice
bucket insert
Unit with push
handle
showing ice
bucket insert

Premium Roll Up –
single sided
Econo Roll up -
single sided
X Banner -
single sided
Premium Roll Up –
double sided
Rocket Rollers (Roll ups)
Specifications
• Range of sizes available with roller & X bow suspension systems
• Hi quality printed graphic on Ferrari PVC or fabric
• Unit supplied bagged and boxed for secure distribution

Slinky Brand Stand (micro fabric standee)
Specifications
• Ultra lightweight modular plastic sub-structure
• Dye-sublimated fabric sleeve fully envelops structure
• Laser cut , silver powder coated metal base feet
• Supplied with 3D assembly instructions for tool free assembly
• Supplied in micro carry bag (see below) + boxed for distribution
Options
• Replaceable graphic sleeves
• Custom sizes & heights available upon request
Size Options
Mini Slinky: 400 mm (w) x 1800 mm (h)
Midi Slinky: 600 mm (w) x 1800 mm (h)
Maxi Slinky: 850 mm (w) x 2000 mm (h)
Unit Weights
Mini Slinky: 2,1 kg
Midi Slinky: 2,6 kg
Maxi Slinky: 3,8 kg
Mini Slinky
400 mm (w) x 1800 mm (h)
Midi Slinky
600 mm (w) x 1800 mm (h)
Maxi Slinky:
850 mm (w) x 2000 mm (h)
( same size as a standard roll up )
Unit dismantles and packs
into a micro carry bag

Mini Brand Stand (fabric banner wall)
Specifications
• Size 0.7 m (w) x 2.1m (h) graphic face exposure with full double sided print
• Lightweight modular plastic sub structure
• Fabric sleeve envelops structure completely
• Laser cut , silver powder coated metal base feet
• Requires tool-free assembly
Options
• Black or white lycra on side panels
• Replaceable graphic sleeves
• Custom sizes & heights available upon request
Assembled Size: 700 mm (w) x 140 mm (d) x 2100 mm (h)
Packaged Size: 1520 mm (l) x 250 mm (d) x 280 mm (h)
Unit Weight: 7kg

We would like to thank you for taking the time to peruse our In-Store Demo & Promo Equipment Catalogue; we trust that you have found something
suitable for your campaign.
Should you wish to see receive information pertaining to a specific product or need a volume and spec specific CE, please send us your enquiry to
one of our email addresses provided hereunder.
We look forward to your contact and can assure you of our best attention at all times.
Rocket Creative Email Address:
Unit 6 Olympia Gardens liz@rocketcreative.co.za
Olympia Street, Eastgate Ext 6 daryn@rocketcreative.co.za
Sandton, Johannesburg, South Africa richard@rocketcreative.co.za
PO Box 2554, Cramerview, 2060 info@rocketcreative.co.za
Tel : + 27 ( 1 1 ) 262 4698
w w w . r o c k e t c r e a t i v e . c o . z a
h t t p : / / w w w . b i z c o m m u n i t y . c o m / P r e s s o f f i c e / R o c k e t C r e a t i v e

In-Store Promo Equipment

Recommended

Recommended

More Related Content

Viewers also liked

Viewers also liked (6)

Similar to In-Store Promo Equipment

Similar to In-Store Promo Equipment (20)

Recently uploaded

Recently uploaded (20)

In-Store Promo Equipment