Distributed by
Sullivan-Palatek
1201 W. US Highway 20
Michigan City, IN 46360
PH: (800) 438-6203
FX: (800) 725-6203
info@p...
Sullivan-Palatek
1201 W. US Highway 20
Michigan City, IN 46360
PH: (800) 438-6203
FX: (800) 725-6203
info@palatek.com
www....
D185 Series
Portable
Compressors
“The Ultimate Performance Rotary Screw Air Compressor”
•	 All 185 Compressors have Galvan...
Dedicated to Quality &
KEEP IT SIMPLE...
KEEP IT CLEAN...
MAKE IT SOLID...
MAKE IT Sullivan!
The Sullivan-Palatek
Compress...
Committed to Support
Alternator warning light
Hour meter
Ignition on/off switch
Fuel gauge
Discharge air pressure gauge
En...
Electric Driven Industrial Air Compressors
5-10 HP Belt Driven
15-40 HP Direct Drive
40-400 HP Updraft
High and Low Pressu...
D210-D375 Series
Portable
Compressors
“The Ultimate Performance Rotary Screw Air Compressor”
Sullivan-Palatek Portable Fea...
Dedicated to Quality &
KEEP IT SIMPLE...
KEEP IT CLEAN...
MAKE IT SOLID...
MAKE IT Sullivan!
The Sullivan-Palatek
Compress...
Committed to Support
Heavy Duty Drawbar
The Drawbars on all our portable
compressors are made of strong
tubular steel and ...
Electric Driven Industrial Air Compressors
5-10 HP Belt Driven
15-40 HP Direct Drive
40-400 HP Updraft
High and Low Pressu...
D750 PHCA/CU, D825 PCA/PCU, D900 PCA/PCU, D900 PHCU
“The Ultimate Performance Rotary Screw Air Compressor”
Sullivan-Palate...
Dedicated to Quality & ..
KEEP IT SIMPLE...
KEEP IT CLEAN...
MAKE IT SOLID...
MAKE IT Sullivan!
The Sullivan-Palatek
Compr...
.. Committed to Support
Heavy Duty Drawbar
The Drawbars on all our portable 	
compressors are made of heavy 	
duty formed ...
Electric Driven Industrial Air Compressors
5-10 HP Belt Driven
15-40 HP Direct Drive
40-400 HP Updraft
High and Low Pressu...
Sullivan-Palatek Portable Features:
•	 Automatic zero to 100% capacity control
•	 Surge brakes, standard
•	 Automatic shut...
Dedicated to Quality & ..
Sullivan-Palatek
Portable Air
Compressors are
Reliable, Economical
to Operate & Built
in America...
.. Committed to Support
Heavy Duty Drawbar
The Drawbars on all our portable
compressors are made of heavy 	
duty formed st...
Electric Driven Industrial Air Compressors
5-10 HP Belt Driven
15-40 HP Direct Drive
40-400 HP Updraft
High and Low Pressu...
Dedicated to Quality.....Committed to Support
•	 Large, 108 mm Diameter Twin Screw         
Air End has Exclusive Three Ye...
ENGINE
COMPRESSOR
DIMENSIONS
Type Single Stage, oil flooded rotary screw Single Stage, oil flooded rotary screw
Ambient Op...
“The Ultimate Performance
Rotary Screw Air Compressor”
Dedicated to Quality.....Committed to Support
•	 Large, 108mm (D250...
ENGINE
COMPRESSOR
SPECIFICATIONS
DIMENSIONS
Type Single Stage, oil flooded rotary screw Single Stage, oil flooded rotary s...
Dedicated to Quality & Committed to Support
D375Q7JDC
EXPORT Portable
Compressors
•	 Large, 127mm Diameter Air End
•	 Excl...
ENGINE
COMPRESSOR
DIMENSIONS
D375Q7 HM 1/13 1M
Specifications subject to change without notice.
1201 W. US Highway 20
Mich...
“The Ultimate Performance
Rotary Screw Air Compressor”
Dedicated to Quality.....Committed to Support
•	 Large 204mm Diamet...
Specifications
Dimensions & Specifications subject to change without notice
Dimensions
(Metric in Parentheses)
SP750-900SP...
“The Ultimate Performance
Rotary Screw Air Compressor”
Dedicated to Quality.....Committed to Support
•	 Large 321mm Diamet...
Dimensions & Specifications subject to change without notice
SP1300-1800SPEC-RP 08/12 1M
1201 US Highway 20 West	 TEL: 219...
Dedicated to Quality & Committed to Support
D950-D1150
High Pressure
Two Stage
FEATURES
•	 Automatic 0 to 100% Capacity
•	...
1201 W. US Highway 20
Michigan City, IN 46360
Tel: 219-874-2497
Tel: 800-438-6203
www.sullivanpalatek.com Email: info@pala...
Dedicated to Quality & Committed to Support
D300-D375 Off Shore
Portable
Compressors
•	 127mm (D375) Diameter Twin Screw A...
ENGINE
COMPRESSOR
DIMENSIONS
OS D300-D375 FP 9/13 1M
Specifications subject to change without notice.
1201 W. US Highway 2...
Dedicated to Quality & Committed to Support
•	 Large 204mm Diameter Twin Screw Air End
Manufactured In The USA by Sullivan...
1201 W. US Highway 20
Michigan City, IN 46360
Tel: 219-874-2497
Tel: 800-438-6203
www.sullivanpalatek.com Email: info@pala...
Dedicated to Quality & Committed to Support
D1300-D1800
Off Shore
Portable Series
Off Shore Features:
•	 Air End Manufactu...
1201 W. US Highway 20
Michigan City, IN 46360
Tel: 219-874-2497
Tel: 800-438-6203
www.sullivanpalatek.com Email: info@pala...
FEATURES:
ELECTRIC MOTOR 230/460 volt, NEMA T-frame, C-face, TEFC, energy efficient.
ELECTRIC Cam-Lok cable connectors.
MO...
MODEL 50UD 100DG 200DG 250DG 350UD 400UD
COMPRESSOR DATA 60Hz
Capacity, ACFM 200 440 750 900 1490 1490
Maximum full load/u...
®
Aftercooler/Dryer
Air Treatment
Skid Package
Aftercooler - Filter - Dryer Construction Packages
The Advantages of owning...
1201 W. US Highway 20
Michigan City, IN 46360
Tel: 219-874-2497
Tel: 800-438-6203
www.sullivanpalatek.com
Email: info@sull...
1201 US Hwy 20 West · Michigan City, IN 46360 · Tel: 219-874-2497 · FAX: 219-872-5043 · www.sullivanpalatek.com
SULLIVAN’S...
Product Description
WEATHER-ALL™ COMPRESSOR FLUID is designed for all types of rotary screw air compressors used
in varyin...
Product Support Handbook
Portable Air Compressors
2011REVISED
Contact Info
Sullivan-Palatek, Inc.
1201 US Hwy 20 West
Michigan City, IN 46360
T: 219-874-2497
F: 219-872-5043
productsup...
iii
Preface
This document explains product support policies and procedures that apply to Portable Air Compressor products....
iv
A word about older products...
Our distributors are occasionally asked to provide service and repair on older Sullivan ...
v
Contents
Spare Parts.......................................................................................................
vi
1
Spare Parts
Ordering Parts
Place your orders with our Parts Department by telephone, telefax, SmartEquip or e-mail.
•	 T...
2
•	 The consignee must make freight damage claims to the delivering carrier.
Do not return damaged shipments to Sullivan-...
3
Warranty Policy
Warranty Duration
Sullivan-Palatek, Inc. warrants its portable compressor products to be free from defec...
4
•	 Necessary labor and other costs related to removing accessories or attachments installed by the distributor or
custom...
5
Request for Warranty Adjustment (RWA)
Sullivan-Palatek distributors and rental companies established as direct accounts ...
6
7
Warranty
Portable Compressors
Sullivan-Palatek, Inc. warrants its new portable air compressor products to be free from d...
Contact Info
Sullivan-Palatek, Inc.
1201 US Hwy 20 West
Michigan City, IN 46360
T: 219-874-2497
F: 219-872-5043
productsup...
®
M-Series
Compressors
CDFE CDD
INDUSTRIAL AIR COMPRESSOR - 5, 7.5, 10 HP M-SERIES
»» Modular oil flooded rotary screw con...
1201 W. US Highway 20
Michigan City, IN 46360
Tel: 219-874-2497
Tel: 800-438-6203
www.sullivanpalatek.com
Email: info@pala...
®
15-30, 40-50, 50-60 HP
Line Shaft
INDUSTRIAL AIR COMPRESSOR - 15-30 LSC, 40-50 LSC, 50-60 LSC
COMPRESSOR:
»» Continuous ...
1201 W. US Highway 20
Michigan City, IN 46360
Tel: 219-874-2497
Tel: 800-438-6203
www.sullivanpalatek.com
Email: info@pala...
®
Model 15 -30 CDD
Compressors
INDUSTRIAL AIR COMPRESSOR - Model 15-30 HP
Compressor & Desiccant Dryer Package
CDD/CDDE
Co...
1201 W. US Highway 20
Michigan City, IN 46360
Tel: 219-874-2497
Tel: 800-438-6203
www.sullivanpalatek.com
Email: info@pala...
®
“The Ultimate Performance Rotary Screw Air Compressor”
Shown with optional tank mount
INDUSTRIAL AIR COMPRESSOR - 15-40 ...
The advantages of owning a 	
Sullivan-Palatek Rotary Screw 	
Air Compressor
Sullivan-Palatek manufactures one of the most ...
Controls
Full modulation, solenoid controlled for smooth
transition to lowest possible no load power. 		
Automatic start/s...
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Sullivan Palatek Product Book
Upcoming SlideShare
Loading in …5
×

Sullivan Palatek Product Book

4,506 views

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
4,506
On SlideShare
0
From Embeds
0
Number of Embeds
5
Actions
Shares
0
Downloads
20
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Sullivan Palatek Product Book

  1. 1. Distributed by Sullivan-Palatek 1201 W. US Highway 20 Michigan City, IN 46360 PH: (800) 438-6203 FX: (800) 725-6203 info@palatek.com www.sullivanpalatek.com Product HM 5/13 2M Filters 40-500 HP Refrigerated Air Dryers NEW CRP-IDC “The Ultimate Performance Rotary Screw Air Compressor” Manufacturer of Electric Air Compressor for Industrial Use Featuring Rotary Screw Air Compressors Manufactured in U.S.A. 5-10 HP Belt Driven 15-40 HP Direct Drive 40-500 HP High and Low Pressure Variable Frequency Drive Designs Specialty Packaged Systems Piston Air Compressors Splash Lube Pressure Lube Gas Driven Compressed Air Accessories Refrigerated Air Dryers Desiccant Air Dryers Air Filters Condensate Management Systems Oil Free Systems Air System Analysis System Management Solutions Gear Driven 25-50 HP Data Logger Regenerative Dryer Reciprocating VFD M-Series CDD Direct Drive 15-40 HP
  2. 2. Sullivan-Palatek 1201 W. US Highway 20 Michigan City, IN 46360 PH: (800) 438-6203 FX: (800) 725-6203 info@palatek.com www.sullivanpalatek.com D185P3 D185 D375 750-900 CFM Off Shore D750P D1600PH Electric Construction Aftercooler/Dryer Skid Package SPB-60 SCH-3 SRD-75 Distributed by Featuring Portable Compressors Manufactured in the U.S.A. 185 cfm to 1800 cfm John Deere, CAT and Cummins Engines 3 year Air End Warranty Utility Models Offshore Models High Pressure Portable and Skid 950/350 to 1150/350 Instrument Quality Air 375H to 1600H Skid Mount Aftercoolers Skid Mount Dryers and Aftercoolers Electric Construction Compressors 50 to 450 HP Electronic Parts Orders Through SmartEquipTM Full Line of Pneumatic Tools Hoses and Accessories “The Ultimate Performance Rotary Screw Air Compressor” Manufacturer of Portable Air Compressors for Construction Use
  3. 3. D185 Series Portable Compressors “The Ultimate Performance Rotary Screw Air Compressor” • All 185 Compressors have Galvaneal Enclosures that protect against chipping and rust. • Glow plug engines provide easy starting in all climates. • The D185P model has galvanized wheel wells and tool boxes for extra rust protection. • Pintle eye or 2” ball hitch is available, adjustable height jackstand and safety chains are standard on all models. • Two-stage air filters with dry type elements provide separate filtration for engine and compressor. Sullivan-Palatek Portable Features: Model shown: D185 P
  4. 4. Dedicated to Quality & KEEP IT SIMPLE... KEEP IT CLEAN... MAKE IT SOLID... MAKE IT Sullivan! The Sullivan-Palatek Compressor The advantages of owning a Sullivan-Palatek Rotary Screw Air Compressor. Sullivan-Palatek provides low maintenance, high performance and the most reliable air ends in the industry. Our design features our advanced profile 108mm rotary screws for high efficiency. Reliability, Low Operating Cost and Longevity. • Rear panel detaches for external cleaning of coolers. All units have side by side coolers. • The Standard D185P model has a 29 gallon steel fuel tank, galvanized wheel wells and tool boxes, heavy-duty 15” “ST” rated tires for stability and ease of towing. • The P2 & P3 models have 20 gallon plastic fuel tanks, and tires with 13 inch wheels. • P2 Model has a containment frame, fork pockets and external drains. • Drawbars are made of strong tubular steel with choice of 3” pintle, or 2” ball hitch. • Adjustable, swivel screwjack. • Standard safety chains. Easy Access Model shown: D185 P Quality Built Model shown: D185 P2 P2 and P3 FlexAir Full length tool box on each side. (PJD & PCA models only.) Sullivan-Palatek manufactures air ends in our Michigan City plant to ensure complete control over assembly, quality and testing of all components. Oversized tapered roller bearings and other design features add to the quality of every Sullivan-Palatek machine. We offer a Three Year Unlimited Hour Air End Warranty on all of our machines.
  5. 5. Committed to Support Alternator warning light Hour meter Ignition on/off switch Fuel gauge Discharge air pressure gauge Engine water temp gauge* Engine oil pressure gauge* Starting aid light Start run selector switch Start bypass button Start switch Alternator warning light Hour meter Ignition on/off switch Discharge air pressure gauge Starting aid light Load unload selector switch Bypass button Start switch Model D185P JD/CA Model D185 P2 P3 *CAT has warning light only. P2 FlexAir Machine is built with removable drawbar and running gear so it can easily be mounted on a truck bed or any other utility type vehicle installation. It has fork lift pockets for lifting and floor mounting, a full containment frame and external drains for all fluids. The FlexAir can be a cost effective replacement for a dedicated purpose built Utility model compressor. 185 U2 SmartEquip To place electronic parts orders, or direct access to technical information, visit Sullivan-Palatek’s home page at: www.sullivanpalatek.com and click on SmartEquip Pneumatic Tools Available for all Portable Air Compressors The standard factory fill in all our portable compressors. • Used for all weather conditions • Anti-wear & anti-rust additives • Anti-foaming additives • Quick water separation • Excellent viscosity index Weather-All Portable Compressor Fluid MODEL PSI CFM ENGINE MANUFACTURER ENGINE HORSE- POWER LENGTH (inches) HEIGHT (inches) WIDTH (inches) WEIGHT (pounds) D185 PJD 100 185 JOHN DEERE 49 138.25 63.5 55 2300 D185 PCA 100 185 CATERPILLAR 49 138.25 63.5 55 2230 D185 P2JD 100 185 JOHN DEERE 49 121.81 60.39 55 2000 D185 P2CA 100 185 CATERPILLAR 49 121.81 60.39 55 1910 D185 P3JD 100 185 JOHN DEERE 49 121.92 61.87 55 1980 D185 P3CA 100 185 CATERPILLAR 49 121.92 61.87 55 1890 SPECIFICATIONS Description, Specifications and Pictures represented in this brochure may vary from actual equipment purchased. Sullivan-Palatek D185 Model Air Line Lubricator Option and Hose Reels Dual hose reels require 75” A-frame drawbar. (Available for PJD & PCA models and higher.) Examples: • Chippers • Breakers • Rivet Busters • Scalers • Drills • Air Lance APPROX. SHIPPING
  6. 6. Electric Driven Industrial Air Compressors 5-10 HP Belt Driven 15-40 HP Direct Drive 40-400 HP Updraft High and Low Pressure Variable Frequency Drive Designs Specialty Packaged Systems Piston Air Compressors Splash Lube Pressure Lube Gas Driven Compressed Air Accessories Refrigerated Air Dryers Desiccant Air Dryers Air Filters Condensate Management Systems Oil Free Systems Air System Analysis System Management Solutions Diesel Driven Portable Air Compressors 185 cfm to 1800 cfm John Deere, Cat and Cummins Engines 3 year Air End Warranty Utility Models Offshore Models High Pressure Portable and Skid 950/350 to 1150/350 Instrument Quality Air 375H to 1600H Skid Mount Aftercoolers Skid Mount Dryers and Aftercoolers Electric Construction Compressors 50 to 400 HP Electronic Parts Orders Through SmartEquipTM Full Line of Pneumatic Tools Hoses and Accessories Sullivan-Palatek 1201 W US Hwy 20 Michigan City, IN 46360 Distributed By: PH: 800-438-6203 FX: 800-725-6203 info@sullivanind.com www.sullivanpalatek.com SM RP 8-12 2/M
  7. 7. D210-D375 Series Portable Compressors “The Ultimate Performance Rotary Screw Air Compressor” Sullivan-Palatek Portable Features: • All 210-375 Compressors have Galvaneal Enclosures that protect against chipping and rust. • Galvanized wheel wells and tool boxes for extra rust protection. • Pintle eye or 2” ball hitch is available, adjustable height jackstand and safety chains are standard on all models. • Two-stage air filters with dry type elements provide separate filtration for engine and compressor. • Noise level limited to maximum of 76 dBA at 7 meters Shown with Optional Pneumatic 3rd Wheel Jack
  8. 8. Dedicated to Quality & KEEP IT SIMPLE... KEEP IT CLEAN... MAKE IT SOLID... MAKE IT Sullivan! The Sullivan-Palatek Compressor The advantages of owning a Sullivan-Palatek Rotary Screw Air Compressor. Sullivan-Palatek provides low maintenance, high performance and the most reliable air ends in the industry. Our design features 108mm in D210 to 250 and 127.5mm in 300 to 375 packages for high efficiency. Operating costs are significantly reduced because our compressors can be sized to desired operating conditions. Model shown: D250 Galvaneal coated sheet metal Safety orange powder coat paint Aluminum hinges Stainless steel hardware (Latches, sheet metal, bolts and nuts) One piece canopy is easily removable for major service Tool Boxes SmartEquip To place electronic parts orders, or direct access to technical information, visit Sullivan-Palatek’s home page at: www.sullivanpalatek.com and click on SmartEquip Internal tool boxes are solid steel and fully galvanized. Canopy, Hinges and Hardware Sullivan-Palatek manufactures air ends in our Michigan City plant to ensure complete control over assembly, quality and testing of all components. Tapered roller bearings and other design features add to the quality of every Sullivan-Palatek machine. We offer a Three Year Unlimited Hour Air End Warranty on all of our machines.
  9. 9. Committed to Support Heavy Duty Drawbar The Drawbars on all our portable compressors are made of strong tubular steel and enable easy backing. Adjustable 3” pintle, or 2” ball hitch. Adjustable, swivel screwjack. Standard safety chains. Optional 3rd wheel available. Hour meter Fuel gauge with low fuel shutdown Discharge air pressure gauge Engine water temp gauge Engine oil pressure gauge Full electronic engine diagnostic gauge Electric system circuit breaker Start run valve (unloaded starting) On-Off start switch Dual high-low pressure switch from 150 to 100 PSI (Tools at 100 line testing, or blasting 150) Alternator warning light Hour Meter Igniton on/off switch Fuel gauge Discharge air pressure gauge Start run selector switch Start bypass button Start switch D375 Full Gauge Panel Pneumatic Tools Available for all Portable Air Compressors Examples: • Chippers • Breakers • Rivet Busters • Scalers • Drills • Air Lance The standard factory fill in all our portable compressors. • Used for all weather conditions • Anti-wear & anti-rust additives • Anti-foaming additives • Quick water separation • Excellent viscosity index Weather-All Portable Compressor Fluid MODEL PSI CFM ENGINE MANUFACTURER ENGINE HORSEPOWER LENGTH (inches) HEIGHT (inches) WIDTH (inches) WEIGHT (pounds) D210 PHJD 150 210 JOHN DEERE 74 138.25 63.5 55 2710 D250 PJD 100 250 JOHN DEERE 74 138.25 63.5 55 2500 D300 PDJD 200 300 JOHN DEERE 140 145.00 62.5 55 3500 D375 PDJD 100-150 375 JOHN DEERE 140 145.00 62.5 55 3340 D375 PDCA 100-150 375 CATERPILLAR 126 145.00 62.5 55 3360 SPECIFICATIONS Description, Specifications and Pictures represented in this brochure may vary from actual equipment purchased. Dual Control Regulators Switchable dual control regulators for high (150 psi) and low (100 psi) Select Advantages 210 250 300 375 Multiple service connections     Exclusive 3 year warranty     Low fuel level shutdown OP OP   Automatic shutdown protection system     Automatic 0 to 100% capacity control     Cooler access panel for cleaning     Containment base   Remote drains   High-low selector switch for dual pressure   Comparison Chart Air Line Lubricatior Dual Hose Reel Option Other options include: A-Frame drawbar, cold weather kit and in-line oilers. 210 Gauge Panel APPROX. SHIPPING
  10. 10. Electric Driven Industrial Air Compressors 5-10 HP Belt Driven 15-40 HP Direct Drive 40-400 HP Updraft High and Low Pressure Variable Frequency Drive Designs Specialty Packaged Systems Piston Air Compressors Splash Lube Pressure Lube Gas Driven Compressed Air Accessories Refrigerated Air Dryers Desiccant Air Dryers Air Filters Condensate Management Systems Oil Free Systems Air System Analysis System Management Solutions Diesel Driven Portable Air Compressors 185 cfm to 1800 cfm John Deere, Cat and Cummins Engines 3 year Air End Warranty Utility Models Offshore Models High Pressure Portable and Skid 950/350 to 1150/350 Instrument Quality Air 375H to 1600H Skid Mount Aftercoolers Skid Mount Dryers and Aftercoolers Electric Construction Compressors 50 to 400 HP Electronic Parts Orders Through SmartEquipTM Full Line of Pneumatic Tools Hoses and Accessories Sullivan-Palatek 1201 W US Hwy 20 Michigan City, IN 46360 Distributed By: PH: 800-438-6203 FX: 800-725-6203 info@sullivanind.com www.sullivanpalatek.com SM RP 8-12 2/M
  11. 11. D750 PHCA/CU, D825 PCA/PCU, D900 PCA/PCU, D900 PHCU “The Ultimate Performance Rotary Screw Air Compressor” Sullivan-Palatek Portable Features: • Automatic zero to 100% capacity control • Electric brakes, standard • Automatic shutdown & protection system • Automatic blowdown valve • Unloaded starting/closed inlet start • Noise level limited to maximum of 76 dBA at 7 meters • Reinforced jack stand D750 - D900 Portable Compressors
  12. 12. Dedicated to Quality & .. KEEP IT SIMPLE... KEEP IT CLEAN... MAKE IT SOLID... MAKE IT Sullivan! The Sullivan-Palatek Compressor The advantages of owning a Sullivan-Palatek Rotary Screw Air Compressor. Sullivan-Palatek provides low maintenance, high performance and the most reliable air ends in the industry. Our design features advanced profile 204mm rotary screws for high efficiency. Operating costs are significantly reduced because compressors can be sized to desired operating conditions. Sullivan-Palatek manufactured air end ensures complete control over quality and testing of all components. Tapered roller bearings add to the quality of every Sullivan-Palatek machine. Sullivan-Palatek provides A THREE YEAR, Unlimited Hour, Air End Warranty, on all machines. Reliability, Low Operating Cost and Longevity. • Corrosion resistant galvaneal steel enclosure • Extra large service doors for easy maintenance • Aluminized fuel tank resists corrosion • Heavy-duty chassis & drawbar for stable towing • 24 Volt, maintenance free battery system (2300 to 2800 CCA) Pneumatic tools available for all Portable Air Compressors SmartEquip To place electronic parts orders, or direct access to technical information, visit Sullivan-Palatek’s home page at: www.sullivanpalatek.com and click on SmartEquip
  13. 13. .. Committed to Support Heavy Duty Drawbar The Drawbars on all our portable compressors are made of heavy duty formed steel. • Adjustable, swivel screwjack • Standard safety chains • Adjustable Lunette Eye Standard Gauges: • Fuel gauge, low fuel shutdown • Air filter maintenance indicators • Air/Oil separator maintenance indicators • Tachometer/Hourmeter • Discharge air pressure • Compressor air temperature • Engine oil pressure • Engine water temperature • Voltmeter • Low coolant warning light Tattletail gauges will quickly pinpoint the reason for shutdown. IQ Aftercooler/Filter Option A modular Aftercooler and filter package is available in the 750, 825 and 900 CFM packages. An efficient aftercooler which will give 15 degree approach temperatures, coupled with downstream filtration will supply Instrument Quality air for those applications where cleaner dryer air is required. Meets ISO 8573.1 : 2001 compressed air quality standards. IQ Packages are supplied with two outlets, standard air, IQ Air. Extra Advantages • Weather-All compressor oil • Adjustable height drawbar • High ambient operation • 3 stage air filters • Heavy duty frame • Heavy duty drawbar Optional: • Aftercooler/Filter for IQ Air • Aftercooler • Hydraulic Brakes • Fuel-water separator • Drains for fuel, engine oil, and compressor oil • Full containment base (Cummins Instrument Panel Shown) The standard factory fill in all our portable compressors. • Used for all weather conditions • Anti-wear & anti-rust additives • Anti-foaming additives • Quick water separation • Excellent viscosity index Weather-All Portable Compressor Fluid Pneumatic Tools Available for all Portable Air Compressors MODEL PSI CFM ENGINE MANUFACTURER ENGINE HORSE- POWER LENGTH (inches) HEIGHT (inches) WIDTH (inches) WEIGHT (pounds) D750 PHCA 150 750 CATERPILLAR 275 199.48 94.50 76.50 8,722 D750 PHCU 150 750 CUMMINS 305 199.48 94.50 76.50 9,020 D825 PCA 125 825 CATERPILLAR 275 199.48 94.50 76.50 8,722 D825 PCU 125 825 CUMMINS 305 199.48 94.50 76.50 9,020 D900 PCA 100 900 CATERPILLAR 275 199.48 94.50 76.50 8,722 D900 PCU 100 900 CUMMINS 305 199.48 94.50 76.50 9,020 D900 PHCU 150 900 CUMMINS 305 199.48 94.50 76.50 9,020 SPECIFICATIONS Description, Specifications and Pictures represented in this brochure may vary from actual equipment purchased. CAT engines are available only for export out of the USA
  14. 14. Electric Driven Industrial Air Compressors 5-10 HP Belt Driven 15-40 HP Direct Drive 40-400 HP Updraft High and Low Pressure Variable Frequency Drive Designs Specialty Packaged Systems Piston Air Compressors Splash Lube Pressure Lube Gas Driven Compressed Air Accessories Refrigerated Air Dryers Desiccant Air Dryers Air Filters Condensate Management Systems Oil Free Systems Air System Analysis System Management Solutions Diesel Driven Portable Air Compressors 185 cfm to 1800 cfm John Deere, Cat and Cummins Engines 3 year Air End Warranty Utility Models Offshore Models High Pressure Portable and Skid 950/350 to 1150/350 Instrument Quality Air 375H to 1600H Skid Mount Aftercoolers Skid Mount Dryers and Aftercoolers Construction Electric Rentals 50 to 400 HP Electronic Parts Orders Through SmartEquipTM Full Line of Pneumatic Tools Hoses and Accessories Sullivan-Palatek 1201 W US Hwy 20 Michigan City, IN 46360 Distributed By: PH: 800-438-6203 FX: 800-725-6203 info@sullivanind.com www.sullivanpalatek.com BIG RP 5-12 2/M
  15. 15. Sullivan-Palatek Portable Features: • Automatic zero to 100% capacity control • Surge brakes, standard • Automatic shutdown & protection system • Automatic blowdown valve • Unloaded starting/closed inlet start • Noise level limited to maximum of 76 dBA at 7 meters • Reinforced jack stand D1300PH CA/CU, D1600P CA/CU, D1600PH CA/CU, D1800P CA/CU “The Ultimate Performance Rotary Screw Air Compressor” D1300 - D1800 Portable Compressors
  16. 16. Dedicated to Quality & .. Sullivan-Palatek Portable Air Compressors are Reliable, Economical to Operate & Built in America! The Sullivan-Palatek Compressor The advantages of owning a Sullivan-Palatek Rotary Screw Air Compressor. Sullivan-Palatek provides low maintenance, high performance and the most reliable air ends in the industry. Our design features advanced profile 321mm rotary screws for high efficiency. Operating costs are significantly reduced because compressors can be sized to desired operating conditions. Sullivan-Palatek manufactured air end ensures complete control over quality and testing of all components. Tapered roller bearings add to the quality of every Sullivan-Palatek machine. Sullivan-Palatek provides A THREE YEAR, Unlimited Hour, Air End Warranty, on all machines. Reliability, Low Operating Cost and Longevity. • Corrosion resistant galvaneel steel enclosure. • Extra large service doors for easy maintenance. • Aluminized fuel tank resists corrosion. • Heavy-duty chassis & drawbar for stable towing. • 24 Volt, maintenance free battery system (2300 to 2800 CCA). SmartEquip To place electronic parts orders, or direct access to technical information, visit Sullivan-Palatek’s home page at: www.sullivanpalatek.com and click on SmartEquip
  17. 17. .. Committed to Support Heavy Duty Drawbar The Drawbars on all our portable compressors are made of heavy duty formed steel. • Adjustable, swivel screwjack. • Standard safety chains. • Adjustable Lunette Eye. IQ Aftercooler Option A modular Aftercooler and filter package is available in the 1300, 1600 and 1800 CFM packages. An efficient aftercooler which will give 15 degree approach temperatures, coupled with downstream filtration will supply Instrument Quality air (.01 PPM) for those applications where cleaner dryer air is required. Meets ISO 8573 compressed air quality standards. Extra Advantages • Weather-All compressor oil • High ambient operation • 3 stage air filters • Heavy duty frame • Full containment base. • Heavy duty drawbar • Drains for fuel, engine oil, and compressor oil. Optional: • Aftercooler/Filter for IQ Air • Aftercooler • Fuel-water separator MODEL PSI CFM ENGINE MANUFACTURER ENGINE HORSE- POWER LENGTH (inches) HEIGHT (inches) WIDTH (inches) WEIGHT (pounds) D1300 PHCA 150 1300 CATERPILLAR 475 273 103 90.5 19,000 D1300 PHCU 150 1300 CUMMINS 485 273 103 90.5 19,000 D1600 PCA 125 1600 CATERPILLAR 475 273 103 90.5 19,000 D1600 PCU 125 1600 CUMMINS 485 273 103 90.5 19,000 D1600 PHCA 150 1600 CATERPILLAR 540 273 103 90.5 19,000 D1600 PHCU 150 1600 CUMMINS 535 273 103 90.5 19,000 D1800 PCA 125 1800 CATERPILLAR 475 273 103 90.5 19,000 D1800 PCU 125 1800 CUMMINS 485 273 103 90.5 19,000 SPECIFICATIONS Description, Specifications and Pictures represented in this brochure may vary from actual equipment purchased. CAT engines are available only for export out of the USA Pneumatic Tools Available for all Portable Air Compressors The standard factory fill in all our portable compressors. • Used for all weather conditions • Anti-wear & anti-rust additives • Anti-foaming additives • Quick water separation • Excellent viscosity index Weather-All Portable Compressor Fluid New Standard Gauge Panel: • Panel light • Fuel gauge, low fuel shutdown • Air filter maintenance indicators • Air/Oil separator maintenance indicators • Discharge air pressure gauge • Compressor air/oil temperature gauge • Low coolant warning light New Engine Fault Reader quickly pinpoints reason for shutdown and monitors engine functions.
  18. 18. Electric Driven Industrial Air Compressors 5-10 HP Belt Driven 15-40 HP Direct Drive 40-400 HP Updraft High and Low Pressure Variable Frequency Drive Designs Specialty Packaged Systems Piston Air Compressors Splash Lube Pressure Lube Gas Driven Compressed Air Accessories Refrigerated Air Dryers Desiccant Air Dryers Air Filters Condensate Management Systems Oil Free Systems Air System Analysis System Management Solutions Diesel Driven Portable Air Compressors 185 cfm to 1800 cfm John Deere, Cat and Cummins Engines 3 year Air End Warranty Utility Models Offshore Models High Pressure Portable and Skid 950/350 to 1150/350 Instrument Quality Air 375H to 1600H Skid Mount Aftercoolers Skid Mount Dryers and Aftercoolers Electric Construction Compressors 50 to 400 HP Electronic Parts Orders Through SmartEquipTM Full Line of Pneumatic Tools Hoses and Accessories Sullivan-Palatek 1201 W US Hwy 20 Michigan City, IN 46360 Distributed By: PH: 800-438-6203 FX: 800-725-6203 info@sullivanind.com www.sullivanpalatek.com LG RP 5-12 1/M
  19. 19. Dedicated to Quality.....Committed to Support • Large, 108 mm Diameter Twin Screw Air End has Exclusive Three Year unlimited hour Warranty • Automatic 0 to 100% Capacity Control • Two Stage Dry Type Air Filter • Multiple Service Connections • Oil Level Sight Glass • Side by Side Coolers for Compressor and Engine • Caterpillar or John Deere Engine • 20 Gallon Fuel Tank • Safety Chains • 13” Wheels & Tires • Choice of Adjustable Height Lunnette Eye or Optional Ball Hitch on Drawbar • Noise Level Limited to Maximum of 76dBA at 7 Meters • Gull-Wing Doors for Superior access to Components and servicing • Heavy Duty Lifting Eye • Automatic Shutdown and Protection System • Automatic Blowdown Valve • Stop, Turn, Tail Lights • Unloaded Starting • Standard Instrumentation Alternator Light Discharge Pressure Gauge Hourmeter • Space Saving Flip Up Towbar • For Optional Equipment, Consult Factory D185P3 Portable Series Our most popular portable air compressor, the D185 P3 series, is more compact and lighter weight with the same reliable operating components as our full size units. Reduced weight saves fuel while towing from site to site.
  20. 20. ENGINE COMPRESSOR DIMENSIONS Type Single Stage, oil flooded rotary screw Single Stage, oil flooded rotary screw Ambient Oper. Temp. Range -20º to +125ºF (-29º to +52ºC) -20º to +125ºF (-29º to +52ºC) Oil Capacity 5.5 gal. (21 L) 5.5 gal. (21 L) Total Receiver Volume 1.7 ft. ³ (48 L) 1.7 ft. ³ (48 L) Air Service Connections Two 3/4” NPT Two 3/4” NPT Type Cooling System Oil to Air Oil to Air Type Air Intake System Two Stage Dry Two Stage Dry Type of Control 0-100% Demand 0-100% Demand Tire Size 175/80D13 175/80D13 Rated Delivery 185 cfm (5.2 m ³/min) 185 cfm (5.2 m ³/min) Rated Operating Pressure 100 psig (6.9 Bar) 100 psig (6.9 Bar) Operating Pressure Range 70-125 psig (4.9-8.6 Bar) 70-125 psig (4.9-8.6 Bar) Estimated Weight, Serviced 1980 lbs 1890 lbs D185P3CA Type Diesel Diesel Make John Deere CAT Model 4024TF TIER 4 INT. C2.2T TIER 4 INT Number of Cylinders 4 4 Bore and Stroke 3.39” x 4.13” (86 x 105mm) 3.3” x 3.9” (84 x 100mm) Displacement 149 cu. in ³ (2.4 L) 135 in ³ (2.2 L) Total Oil Capacity 8.5 qts (8 L) 11.2 qts (10.6 L) Cooling System Capacity 14 qts (13.2 L) 14 qts (13.2 L) Battery Rating 12 Volts 12 Volts CCA @ 0ºF 700 Amps 700 Amps Fuel Tank Capacity 20 gal (75.7 L) 20 gal (75.7 L) Horsepower @ rated RPM 49 (36.5kw) 49 HP (36.5kw) Full Load Speed 2650 RPM 2660 RPM Idle Speed 1650 RPM 1650 RPM D185P3CA D185P3JD-D185P3CA 08/12 1M Specifications subject to change without notice. D185P3JD D185P3JD 1201 W. US Highway 20 Michigan City, IN 46360 Tel: 219-874-2497 Tel: 800-438-6203 www.sullivanpalatek.com Email: info@palatek.com TECHNICAL DATA
  21. 21. “The Ultimate Performance Rotary Screw Air Compressor” Dedicated to Quality.....Committed to Support • Large, 108mm (D250) 127mm (D375) Diameter Twin Screw Air End • Exclusive Three Year Warranty • Automatic 0 to 100% Capacity Control • Two Stage Dry Type Air Filter - External Access • Oil Level Sight Gauge • Side by Side Coolers for compressor and engine • John Deere or Caterpillar TIER III Engines • Steel Fuel Tank • Cooler Access Panel for Cleaning • Safety Chains with Storage • 15” Wheels & Tires • Choice of Adjustable Height Lunette Eye or Optional Ball Hitch on Drawbar • Large Full Length Lockable Tool Boxes on Each Side • Noise Level Limited to Maximum of 76 dBA at 7 Meters • Easily Removable Upper Enclosure • Galvaneal Enclosure-Rust & Corrosion Resistant • Low Fuel Level Shutdown (D300 & D375’s only) • Automatic Shutdown and Protection System • Containment Base (D300-D375 Only) • Remote Drains (D300-D375 Only) • Automatic Blowdown Valve • Stop, Turn, Tail Lights • Unloaded Starting Standard Instrumentation Alternator Light Fuel Level Gauge Discharge Pressure Gauge Hourmeter Engine Oil Pressure Gauge* Engine Water Temperature Gauge* • High-Low Selector Switch for Dual Pressure (D375’s only) • Optional Equipment Instrument Quality Air Low approach temperature aftercooler Water Separator/Trap Primary & Secondary Filtration to 0.01 micron Hose Reels Gauges Tachometer PLUS MANY OTHERS D250PJD D300PDHHJD D375PDCA D375PDJD *Warning Light Used on CAT Powered Units
  22. 22. ENGINE COMPRESSOR SPECIFICATIONS DIMENSIONS Type Single Stage, oil flooded rotary screw Single Stage, oil flooded rotary screw Single Stage, oil flooded rotary screw Single Stage, oil flooded rotary screw Ambient Oper. Temp. Range -20º to +125ºF (-29º to +52ºC) -20º to +125ºF (-29º to +52ºC) -20º to +125ºF (-29º to +52ºC) -20º to +125ºF (-29º to +52ºC) Oil Capacity 5.5 gal. (21 L) 10 gal. (38 L) 10 gal. (38 L) 10 gal. (38 L) Total Receiver Volume 1.7 ft. ³ (48 L) 3.6 ft. ³ (102 L) 3.6 ft. ³ (102 L) 3.6 ft. ³ (102 L) Air Service Connections Two 3/4” NPT One 1 1/2” NPT/Two 3/4” NPT One 1 1/2” NPT/Two 3/4” NPT One 1 1/2” NPT/Two 3/4” NPT Type Cooling System Oil to Air Oil to Air Oil to Air Oil to Air Type Air Intake System Two Stage Dry Two Stage Dry Two Stage Dry Two Stage Dry Type of Control 0-100% Demand 0-100% Demand 0-100% Demand 0-100% Demand Tire Size ST 205/75D15 Hwy Tubeless ST 205/75D15 Hwy Tubeless ST 205/75D15 Hwy Tubeless ST 205/75D15 Hwy Tubeless Rated Delivery 250 cfm (7.1 m ³/min) 300 cfm (8.49 m ³/min) 375 cfm (10.6 m ³/min) 375 cfm (10.6 m ³/min) Rated Operating Pressure 100 psig (700 kPa) 200 psig (1379 kPa) 150 psig (1034k Pa) 150 psig (1034k Pa) Operating Pressure Range 70-125 psig (480-860 kPa) 70-200 psig (480-1379 kPa) 70-165 psig (480-1138 kPa) 70-165 psig (480-1138 kPa) Estimated Weight, Serviced 2507 lbs 3400 lbs 3400 lbs 3395 lbs D250PJD D300PDHHJD D300PDHHJDD250PJD (Metric in Parentheses) Specifications subject to change without notice D250 D300 D375 H 58.5 62.5 62.5 (1486) (1588) (1588) L ¹ 88.25 96 96 (2242) (2438) (2438) L ² 138.25 145 145 (3512) (3708) (3708) (Metric in Parentheses) L ¹ L ² Exhaust Adj. 15 to 19 (381) (483) 50 (1270) Jack Stand 17 (432) Lifting Eye 55 (1397) H 46.5 (1181) Towing Eye SP250-300-375SPEC-RP 1/12 2M D375PDJD Type Diesel Diesel Diesel Diesel Make JOHN DEERE JOHN DEERE JOHN DEERE CATERPILLAR Model 4045TF290 IT4 4045HF285 IT4 4045HF285 IT4 C4.4T (TIER III) Number of Cylinders 4 4 4 4 Bore and Stroke 4.19” x 5.00” (106 x 127mm) 4.19” x 5” (106 x 127mm) 4.19” x 5” (106 x 127mm) 4.1” X 5” (105 X 12mm) Displacement 276 in ³ (4.5 L) 276 in ³ (4.5 L) 276 in ³ (4.5 L) 268 in ³ (4.4 L) Total Oil Capacity 9 qts (8.5 L) 14 qts (13.2 L) 14 qts (13.2 L) 8 qts. (7.57 L) Cooling System Capacity 14 qts (13.2 L) 16 qts. (15.1 L) 16 qts (15.1 L) 16 qts. (15.1 L) Battery Rating 12 Volts 12 Volts 12 Volts 12 Volts CCA @ 0ºF 700 Amps 900 Amps 900 Amps 900 Amps Idle Speed 1650 RPM 1650 RPM 1650 RPM 1650 RPM Fuel Tank Capacity 29 gal (109.8 L) 40 gal. (151 L) 40 gal (151 L) 40 gal. (151 L) Horsepower @ rated RPM 74 HP 140 HP 140 HP 126 HP Full Load Speed 2400 RPM 2300 RPM 2500 RPM 2500 RPM D375PDJD 1201 US Highway 20 West TEL: 219-874-2497 FAX: 219-872-5043 www.sullivanpalatek.com Michigan City, IN 46360 TEL: 800-438-6203 FAX: 800-725-6203 info@sullivanind.com D375PDCA D375PDCA
  23. 23. Dedicated to Quality & Committed to Support D375Q7JDC EXPORT Portable Compressors • Large, 127mm Diameter Air End • Exclusive Three Year Warranty on Air End • Automatic 0 to 100% Capacity Control • Dry Air Filters • Oil Level Sight Gauge • Side by Side Coolers • Cooler Access Panel • John Deere 4025TF250 Tier 1 Engine • Steel Fuel Tank • 15” Wheels • Safety Chains • Choice of Lunnette Eye or Ball Hitch on Height Adjustable Drawbar • Large Full Length Tool Boxes in Each Side with Lockable Handles • Easily Removable Upper Enclosure • Access Panel in Roof for Separator Service • Noise Level Limited to Maximum of 76 dBA at 7 Meters • Galvaneal Enclosure-Rust & Corrosion Resistant • Low Fuel Level Shutdown • Stop, Turn, Tail Lights • Automatic Blowdown Valve • Unloaded Starting • Automatic Shutdown and Protection System High Compressor Temperature Low Engine Oil Pressure High Engine Temperature Standard Instrumentation Alternator Light Fuel Level Gauge Discharge Pressure Gauge Hourmeter Start Run Valve Fuse Ignition Start Switch Bypass for Engine Oil Pressure • Optional Equipment Racor Type Fuel Filters Hose Reels Third Wheel Factory Fill - Weather-All Compressor Fluid
  24. 24. ENGINE COMPRESSOR DIMENSIONS D375Q7 HM 1/13 1M Specifications subject to change without notice. 1201 W. US Highway 20 Michigan City, IN 46360 Tel: 219-874-2497 Tel: 800-438-6203 www.sullivanpalatek.com Email: info@palatek.com TECHNICAL DATA Type Single Stage, Oil Flooded Rotary Screw Ambient Oper. Temp. Range -20º to +125ºF (-29º to +52ºC) Oil Capacity 10 gal. (38 L) Total Receiver Volume 3.6 ft. ³ (102 L) Air Service Connections One 1 1/2” NPT/Two 3/4” NPT Type Cooling System Oil to Air Type Air Intake System Two Stage Dry Type of Control 0-100% Demand Rated Delivery 375 cfm (10.6 m ³/min) Rated Operating Pressure 100 psig (7 Bar) Operating Pressure Range 70-125 psig (4.8 - 8.6 Bar) Estimated Weight, Serviced 3400 lbs D375Q7 JDA Type Diesel Make JOHN DEERE Model 4045TF250 Tier 1 Number of Cylinders 4 Bore and Stroke 4.19” x 5.00” (106 x 127 mm) Displacement 276 in ³ (4.5 L) Total Oil Capacity 14 qts. (13.25 L) Cooling System Capacity 16 qts (15.1 L) Battery Rating 12 Volts CCA @ 0ºF 850 Amps Idle Speed 1650 RPM Fuel Tank Capacity 40 gal (151 L) Horsepower @ rated RPM 125 HP (93 kw) Full Load Speed 2500 RPM D375Q7 JDA
  25. 25. “The Ultimate Performance Rotary Screw Air Compressor” Dedicated to Quality.....Committed to Support • Large 204mm Diameter Twin Screw Air End Manufactured In The USA by Sullivan-Palatek • Exclusive Three Year Warranty • Automatic 0 to 100% Capacity Control • 2” Service Connection • Oil Level Sight Gauge • Caterpillar or Cummins Engine • Aluminized Fuel Tanks • Ether Starting Aid • Single Point Lifting Bail • Dual-Axle Running Gear • Adjustable 3” Lunette Eye • Noise Level Limited to Maximum of 76 dBA at 7 Meters • Automatic Shutdown and Protection System • Electric or hydraulic surge brakes • Galvaneal sheet metal • Automatic Blowdown Valve • Large Service Doors for ease of Maintenance • Standard Instrumentation Fuel Level Gauge, low fuel shutdown Air Filter Maintenance Indicators Air/Oil Separator Maintenance Indicators Tachometer/Hourmeter Discharge Pressure Gauge Compressor Temperature Gauge Engine Oil Pressure Light - CAT Only Engine Water Temperature Light - CAT only Voltmeter Low Coolant Warning Light • Options Built in Aftercooler, Filters Hydraulic Brakes Dual Air Outlets Containment Base More Options Available Sullivan-Palatek Portable Compressors Sizes 750 to 900 CFM - Pressures 90 to 150 PSI Caterpillar or Cummins Engines FEATURES
  26. 26. Specifications Dimensions & Specifications subject to change without notice Dimensions (Metric in Parentheses) SP750-900SPEC-RP 08/11 2M 1201 US Highway 20 West TEL: 219-874-2497 FAX: 219-872-5043 www.sullivanpalatek.com Michigan City, IN 46360 TEL: 800-438-6203 FAX: 800-725-6203 info@sullivanind.com CATERPILLAR (All CA Models) CUMMINS (All CU Models) COMPRESSOR SPECS Type Single Stage, oil flooded rotary screw Ambient Oper. Temp. Range -20º to +125ºF (-29º to +52ºC) Oil Capacity 30 gal. (114 L) Total Receiver Volume 11.5 ft. ³ (362 L) Air Service Connections 2” NPT Type Cooling System Oil to Air Type Air Intake System Three Stage Dry Type of Control 0-100% Demand Tire Size 14.5-6HP 14 Ply Rating Operating Pressure Range 70-150 psig (4.9-10.3 bar) Estimated Weight, Serviced 9000 lbs ENGINE SPECS Type Diesel Make CATERPILLAR or CUMMINS Number of Cylinders 6 Cooling System Capacity 10.5 gal. (40 L) Battery Rating 24 Volts CCA @ 0ºF 1150 Amps per Battery (2) Idle Speed 1400 RPM Fuel Tank Capacity 150 gal (568 L) COMPRESSORS CATERPILLAR Model Rated Delivery Rated Operating Pressure D750PHCA 750 cfm (21.2 m ³/min) 150 psig (10.3 Bar) D825PCA 825 cfm (23.3 m ³/min) 70-125 psig (4.9-8.6 Bar) D900PCA 900 cfm (26.4 m ³/min) 100 psig (7 Bar) CUMMINS D750PHCU 750 cfm (21.2 m ³/min) 150 psig (10.3 Bar) D825PCU 825 cfm (23.3 m ³/min) 70-125 psig (4.9-8.6 Bar) D900PCU 900 cfm (26.4 m ³/min) 100 psig (7 Bar) D900PHCU 900 cfm (26.4 m ³/min) 150 psig (10.3 Bar) ENGINES Model Bore & Stroke Displacement Total Oil Capacity HP @ rated RPM Full Load Speed CATERPILLAR D750PHCA C7 ACERT 4.33” x 5.0” (110 x 127mm) 442 cu. In. (7.2L) 7.5 gal. (28 L) 275 HP 1900 RPM D825PCA C7 ACERT 4.33” x 5.0” (110 x 127mm) 442 cu. In. (7.2L) 7.5 gal. (28 L) 275 HP 2000 RPM D900PCA C7 ACERT 4.33” x 5.0” (110 x 127mm) 442 cu. In. (7.2L) 7.5 gal. (28 L) 275 HP 2200 RPM CUMMINS D750PHCU QSC 8.3 4.49" x 5.31" (114 x 135 mm) 506 cu. In. (8.3 L) 7.3 gal. (27.5 L) 305 HP 1900 RPM D825PCU QSC 8.3 4.49" x 5.31" (114 x 135 mm) 506 cu. In. (8.3 L) 7.3 gal. (27.5 L) 275 HP 2000 RPM D900PCU QSC 8.3 4.49" x 5.31" (114 x 135 mm) 506 cu. In. (8.3 L) 7.3 gal. (27.5 L) 305 HP 2200 RPM D900PHCU QSC 8.3 4.49” x 5.31” (114 x 135 mm) 506 cu. In. (8.3 L) 7.3 gal. (27.5 L) 305 HP 2200 RPM
  27. 27. “The Ultimate Performance Rotary Screw Air Compressor” Dedicated to Quality.....Committed to Support • Large 321mm Diameter Twin Screw Air End Manufactured by Sullivan-Palatek • Exclusive Three Year Warranty • Automatic 0 to 100% Capacity Control • 8” Closed Start, Inlet Valve • One 3” Service Connection • Oil Level Sight Gauge • Caterpillar or Cummins Engine • Steel Fuel Tank • Ether Starting Aid • Single Point Lifting Bail • Tri-Axle Running Gear • Adjustable 3” Lunnette Eye • Noise Level Limited to Maximum of 76 dBA at 7 Meters • Automatic Shutdown and Protection System • Direct Drive-No Gears • Containment Base • Large Service Doors for Easy Maintenance • Automatic Blowdown Valve • Dual Air Outlets (with Aftercooler option) • Standard Instrumentation Air Filter Maintenance Indicator Air/Oil Separator Maintenance Indicator Tachometer/Hourmeter Engine Oil Pressure Gauge Engine Water Temperature Gauge Fuel Level Gauge, low fuel shutdown Voltmeter Compressor Discharge Temperature Gauge Compressor Discharge Air Pressure Gauge Low Coolant Warning Light • Options Built in Aftercooler and Filters PLUS MANY MORE Sullivan-Palatek Portable Compressors Sizes 1300, 1600 and 1800 CFM FEATURES
  28. 28. Dimensions & Specifications subject to change without notice SP1300-1800SPEC-RP 08/12 1M 1201 US Highway 20 West TEL: 219-874-2497 FAX: 219-872-5043 www.sullivanpalatek.com Michigan City, IN 46360 TEL: 800-438-6203 FAX: 800-725-6203 info@sullivanind.com COMPRESSOR SPECS CATERPILLAR (All CA Models) CUMMINS (All CU Models) Type Single Stage, oil flooded rotary screw Ambient Oper. Temp. Range -20º to +125ºF (-29º to +52ºC) Oil Capacity 55 gal. (208 L) Total Receiver Volume 21 ft. ³ (595 L) Air Service Connections 3” NPT Type Cooling System Oil to Air Type Air Intake System Two Stage Dry Type of Control 0-100% Demand Tire Size 8-14.5 Operating Pressure Range 70-150 psig (4.9 - 10.3 Bar) Estimated Weight, Serviced 19000 lbs ENGINE SPECS CATERPILLAR CUMMINS Type Diesel Diesel Number of Cylinders 6 6 Bore and Stroke 5.4” x 6.75” (137 x 171mm) 5.4” x 6.7” (137 x 169mm) Displacement 928 in ³ (15.2 L) 915 in ³ (15 L) Total Oil Capacity 8.75 gal. (33 L) 12 gal. (45.41 L) Cooling System Capacity 18.5 gal. (70 L) 18.5 gal. (70 L) Battery Rating 24 Volts 24 Volts CCA @ 0ºF 1400 Amps per Battery 1400 Amps per Battery Idle Speed 1400 RPM 1400 RPM Fuel Tank Capacity 200 gal (757 L) 200 gal. (757 L) COMPRESSORS ENGINES Rated Delivery Rated Operating Pressure Model HP @ Rated RPM Full Load Speed CATERPILLAR D1300PHCA 1300 cfm (37 m ³/min) 150 psig (10.3 Bar) C15 ACERT 475 HP 1800 RPM D1600PCA 1600 cfm (45 m ³/min) 125 psig (8.6 Bar) C15 ACERT 475 HP 1900 RPM D1600PHCA 1600 cfm (45 m ³/min) 150 psig (10.3 Bar) C15 ACERT 540 HP 2000 RPM D1800PCA 1800 cfm (51 m ³/min) 100 psig (8.6 Bar) C15 ACERT 475 HP 2100 RPM CUMMINS D1300PHCU 1300 cfm (37 m ³/min) 150 psig (10.3 Bar) QSX15 485 HP 1800 RPM D1600PCU 1600 cfm (45 m ³/min) 125 psig (8.6 Bar) QSX15 485 HP 1900 RPM D1600PHCU 1600 cfm (45 m ³/min) 150 psig (10.3 Bar) QSX15 535 HP 2000 RPM D1800PCU 1800 cfm (51 m ³/min) 100 psig (6.9 Bar) QSX15 485 HP 2100 RPM D1800PMCU 1800 cfm (51 m ³/min) 125 psig (8.6 Bar) QSX15 535 HP 2100 RPM (Metric in Parentheses) SPECIFICATIONS DIMENSIONS
  29. 29. Dedicated to Quality & Committed to Support D950-D1150 High Pressure Two Stage FEATURES • Automatic 0 to 100% Capacity • One 3” Service Connection • Oil Level Sight Gauge • Cummins QSX15 or Caterpillar C-15 ACERT • Steel Fuel Tanks • Ether Starting Aid • Single Point Lifting Bail • Tri-Axle Running Gear for Towing Up to 55 MPH • Noise Level Limited to Maximum of 76 dBA at 7 Meters • Automatic Shutdown and Protection System • Automatic Blowdown Valve • Unloaded warm up • Adjustable 3” Lunette Eye • Six Large Service Doors for Ease of Maintenance STANDARD INSTRUMENTATION Air Filter Maintenance Indicator Air/Oil Separator Maintenance Indicator Tachometer/Hourmeter Engine Oil Pressure Gauge Engine Water Temperature Gauge Fuel Level Gauge Voltmeter Compressor Discharge Temperature Gauge Compressor Discharge Air Pressure Gauge Low Coolant Warning Light OPTIONS • Aftercooler with Separator Trap & Filter • Variable Pitch Fan • Low Oil Level Make-up System • Cold Weather Control System Heater D950PVHCA-CU, D1150PVHCA-CU
  30. 30. 1201 W. US Highway 20 Michigan City, IN 46360 Tel: 219-874-2497 Tel: 800-438-6203 www.sullivanpalatek.com Email: info@palatek.com TECHNICAL DATA SPECIFICATIONS Dimensions & Specifications subject to change without notice DIMENSIONS (Metric in Parentheses) 950-1150 SPEC-HM 06/13 2M COMPRESSORS D950PVHCA D950PVHCU D1150PVHCA D1150PVHCU Type Two Stage, oil flooded rotary screw Two Stage, oil flooded rotary screw Two Stage, oil flooded rotary screw Two Stage, oil flooded rotary screw Ambient Oper. Temp. Range -20º to +125ºF (-29º to +52ºC) -20º to +125ºF (-29º to +52ºC) -20º to +125ºF (-29º to +52ºC) -20º to +125ºF (-29º to +52ºC) Oil Capacity 55 gal. (208 L) 55 gal. (208 L) 55 gal. (208 L) 55 gal. (208 L) Total Receiver Volume 19.4 ft. ³ (549 L) 19.4 ft. ³ (549 L) 19.4 ft. ³ (549 L) 19.4 ft. ³ (549 L) Air Service Connections One 3” NPT One 3” NPT One 3” NPT One 3” NPT Type Cooling System Oil to Air Oil to Air Oil to Air Oil to Air Type Air Intake System Two Stage Dry Two Stage Dry Two Stage Dry Two Stage Dry Type of Control 0-100% Demand 0-100% Demand 0-100% Demand 0-100% Demand Tire Size 8-14.5 8-14.5 8-14.5 8-14.5 Rated Delivery 950 cfm (26.9 m ³/min) 950 cfm (26.9 m ³/min) 1150 cfm (32.6 m ³/min) 1150 cfm (32.6 m ³/min) Rated Operating Pressure 350 psig (24.13 BAR) 350 psig (24.13 BAR) 350 psig (24.13 BAR) 350 psig (24.13 BAR) Operating Pressure Range 250-350 psig (17.2-24.1 BAR) 250-350 psig (17.2-24.1 BAR) 250-350 psig (17.2-24.1 BAR) 250-350 psig (17.2-24.1 BAR) Estimated Weight, Serviced 17500 lbs (7938 kg) 17500 lbs (7938 kg) 17500 lbs (7938 kg) 17500 lbs (7938 kg) ENGINES D950PVHCA D950PVHCU D1150PVHCA D1150PVHCU Type Diesel Diesel Diesel Diesel Make CATERPILLAR CUMMINS CATERPILLAR CUMMINS Model C15 ACERT QSX15 C15 ACERT QSX15 Number of Cylinders 6 6 6 6 Bore and Stroke 5.4” x 6.75” (137 x 171mm) 5.4" X 6.7" (137mm x 169mm) 5.4” x 6.75” (137 x 171mm) 5.4" X 6.7" (137mm x 169mm) Displacement 928 cu. In. (15.2 L) 915 cu. In. (15L) 928 cu. In. (15.2 L) 915 cu. In. (15 L) Total Oil Capacity 8.75 gal. (33 L) 12 gal. (45.41L) 8.75 gal. (33 L) 12 gal. (45.41L) Cooling System Capacity 18.5 gal (70 L) 18.5 gal (70L) 18.5 gal (70 L) 18.5 gal (70L) Battery Rating 24 Volts 24 Volts 24 Volts 24 Volts CCA @ 0ºF 1400 Amps per Battery (2) 1400 Amps per Battery (2) 1400 Amps per Battery (2) 1400 Amps per Battery (2) Idle Speed 1400 RPM 1400 RPM 1400 RPM 1400 RPM Fuel Tank Capacity 200 gal (757 L) 200 gal (757 L) 200 gal (757 L) 200 gal (757 L) Horsepower @ rated RPM 475 HP 485 HP 540 HP (403 kw) 535 HP Full Load Speed 1900RPM 1900 RPM 1800 RPM 1800 RPM
  31. 31. Dedicated to Quality & Committed to Support D300-D375 Off Shore Portable Compressors • 127mm (D375) Diameter Twin Screw Air End • Exclusive Three Year Warranty on Air End • Automatic 0 to 100% Capacity Control • Two Stage Dry Type Air Filter • Oil Level Sight Gauge • Side by Side Coolers for Compressor and Engine • John Deere or Caterpillar TIER III Engines • Steel Fuel Tank • Cooler Access Panel for Cleaning • Large Full Length Tool Boxes in Each Side with Lockable Handles • Noise Level Limited to Maximum of 76 dBA at 7 Meters • Removable Upper Enclosure • Galvaneal Enclosure-Rust & Corrosion Resistant • Low Fuel Level Shutdown • Automatic Shutdown and Protection System • Containment Base • Remote Drains • Automatic Blowdown Valve • Unloaded Starting • Chalwyn Valve with Emergency Pull Handle • Heavy Duty Fuel/Water Separator • Line Backer Protection • Pull Tested Galvanized Skid with Four Point Lift • Spark Arrester Mufflers Standard Instrumentation Alternator Light Fuel Level Gauge Discharge Pressure Gauge Hourmeter Engine Oil Pressure Gauge* Engine Water Temperature Gauge* • High-Low Selector Switch for Dual Pressure (D375’s only) Optional Equipment Instrument Quality Air Aftercooler Water Separator/Trap Discharge Air Filtration to 0.01 micron Tachometer PLUS MANY OTHERS *Warning Light Used on CAT Powered Units Off Shore Features:
  32. 32. ENGINE COMPRESSOR DIMENSIONS OS D300-D375 FP 9/13 1M Specifications subject to change without notice. 1201 W. US Highway 20 Michigan City, IN 46360 Tel: 219-874-2497 Tel: 800-438-6203 www.sullivanpalatek.com Email: info@palatek.com TECHNICAL DATA Type Single Stage, Oil Flooded Rotary Screw Single Stage, Oil Flooded Rotary Screw Single Stage, Oil Flooded Rotary Screw Ambient Oper. Temp. Range -20º to +125ºF (-29º to +52ºC) -20º to +125ºF (-29º to +52ºC) -20º to +125ºF (-29º to +52ºC) Oil Capacity 10 gal. (38 L) 10 gal. (38 L) 10 gal. (38 L) Total Receiver Volume 3.6 ft. ³ (102 L) 3.6 ft. ³ (102 L) 3.6 ft. ³ (102 L) Air Service Connections One 1 1/2” NPT/Two 3/4” NPT One 1 1/2” NPT/Two 3/4” NPT One 1 1/2” NPT/Two 3/4” NPT Type Cooling System Oil to Air Oil to Air Oil to Air Type Air Intake System Two Stage Dry Two Stage Dry Two Stage Dry Type of Control 0-100% Demand 0-100% Demand 0-100% Demand Rated Delivery 300 cfm (8.5 m ³/min) 375 cfm (10.6 m ³/min) 375 cfm (10.6 m ³/min) Rated Operating Pressure 200 psig (13.79 Bar) 150 psig (10.34 Bar) 150 psig (10.34 Bar) Operating Pressure Range 70-200 psig (4.8-13.79 Bar) 70-165 psig (4.8-11.38Bar) 70-165 psig (4.8-11.38 Bar) Estimated Weight, Serviced 5800 Lbs 5800 Lbs 5800 Lbs D300SDHHJD D375SDJD D375SDCA D300SDHHJD Type Diesel Diesel Diesel Make JOHN DEERE JOHN DEERE CATERPILLAR Model 4045HF285 (TIER 3) 4045HF285 (TIER 3) C4.4T (TIER 3) Number of Cylinders 4 4 4 Bore and Stroke 4.19” x 5” (106 x 127mm) 4.19” x 5” (106 x 127mm) 4.1” X 5” (105 X 127mm) Displacement 275 in ³ (4.5 L) 275 in ³ (4.5 L) 268 in ³ (8.0 L) Total Oil Capacity 15.53 qts (14.7 L) 15.53 qts (14.7 L) 8.5 qts. (2.25 L) Cooling System Capacity 16 qts. (15.1 L) 16 qts (15.1 L) 16 qts. (15.1 L) Battery Rating 12 Volts 12 Volts 12 Volts CCA @ 0ºF 1000 Amps 1000 Amps 850 Amps Idle Speed 1650 RPM 1650 RPM 1650 RPM Fuel Tank Capacity 40 gal. (151 L) 40 gal (151 L) 40 gal. (151 L) Horsepower @ rated RPM 140 HP 140 HP 126 HP Full Load Speed 2300 RPM 2475 RPM 2475 RPM D375SDJD D375SDCA
  33. 33. Dedicated to Quality & Committed to Support • Large 204mm Diameter Twin Screw Air End Manufactured In The USA by Sullivan-Palatek • Exclusive Three Year Warranty On Air End • Automatic 0 to 100% Capacity Control • 2” Service Connection • Oil Level Sight Gauge • Caterpillar or Cummins Engine • Noise Level Limited to Maximum of 76 dBA at 7 Meters • Automatic Shutdown and Protection System • Block Heater (Standard with Cummins Engine, Option with CAT Engine) • Automatic Blowdown Valve • Large Service Doors for ease of Maintenance • IQ Package (Optional) • Enclosure Fabricated from Galvaneal and Powder Coated to Provide Maximum Corrosion Protection • Environmentally Friendly Containment Base Fabricated from Steel and Galvanized for Maximum Corrosion Protection • Galvanized Railings to Protect Machine in Close Quarters • Aluminized Fuel Tanks • Chalwyn Valve with Emergency Pull Handle • Heavy Duty Fuel/Water Separator • Line Backer Protection • Pull Tested Galvanized Skid with Four Point Lift • Spark Arrester Mufflers D750-D900 Off Shore Portable Series Off Shore Features: • Standard Instrumentation • Fuel Level Gauge, Low Fuel Shutdown • Air Filter Maintenance Indicators • Air/Oil Separator Maintenance Indicators • Tachometer/Hourmeter • Discharge Pressure Gauge • Compressor Temperature Gauge • Engine Oil Pressure Light - CAT Only • Engine Water Temperature Light - CAT only • Voltmeter • Low Coolant Warning Light
  34. 34. 1201 W. US Highway 20 Michigan City, IN 46360 Tel: 219-874-2497 Tel: 800-438-6203 www.sullivanpalatek.com Email: info@palatek.com TECHNICAL DATA SPECIFICATIONS Dimensions & Specifications subject to change without notice DIMENSIONS (Metric in Parentheses) OS D750-900-SPEC-FP 9/13 1M CATERPILLAR (All CA Models) CUMMINS (All CU Models) COMPRESSOR SPECS Type Single Stage, oil flooded rotary screw Ambient Oper. Temp. Range -20º to +125ºF (-29º to +52ºC) Oil Capacity 30 gal. (114 L) Total Receiver Volume 11.5 ft. ³ (362 L) Air Service Connections 2” NPT Type Cooling System Oil to Air Type Air Intake System Three Stage Dry Type of Control 0-100% Demand Operating Pressure Range 70-150 psig (4.9-10.3 bar) Estimated Weight, Serviced 13,000 Lbs. ENGINE SPECS Type Diesel Make CATERPILLAR or CUMMINS Number of Cylinders 6 Cooling System Capacity 10.5 gal. (40 L) Battery Rating 24 Volts CCA @ 0ºF 1050 Amps per Battery (2) Idle Speed 1400 RPM Fuel Tank Capacity 159 gal (602 L) COMPRESSORS CATERPILLAR Model Rated Delivery Rated Operating Pressure D750SH3CA 750 cfm (21.2 m ³/min) 150 psig (10.3 Bar) D825S3CA 825 cfm (23.3 m ³/min) 125 psig (8.6 Bar) D900S3CA 900 cfm (26.4 m ³/min) 100 psig (7 Bar) CUMMINS D750SH3CU 750 cfm (21.2 m ³/min) 150 psig (10.3 Bar) D825S3CU 825 cfm (23.3 m ³/min) 125 psig (8.6 Bar) D900S3CU 900 cfm (26.4 m ³/min) 100 psig (7 Bar) D900SH3CU 900 cfm (26.4 m ³/min) 150 psig (10.3 Bar) ENGINES Model Bore & Stroke Displacement Total Oil Capacity HP @ rated RPM Full Load Speed CATERPILLAR D750SHCA C7 ACERT 4.33” x 5.0” (110 x 127mm) 442 cu. In. (7.2L) 7.5 gal. (28 L) 275 HP 1800 RPM D825SCA C7 ACERT 4.33” x 5.0” (110 x 127mm) 442 cu. In. (7.2L) 7.5 gal. (28 L) 275 HP 1900 RPM D900SCA C7 ACERT 4.33” x 5.0” (110 x 127mm) 442 cu. In. (7.2L) 7.5 gal. (28 L) 275 HP 1900 RPM CUMMINS D750SHCU QSC 8.3 4.49" x 5.31" (114 x 135 mm) 506 cu. In. (8.3 L) 5.25 gal. (19.9 L) 305 HP 1800 RPM D825SCU QSC 8.3 4.49" x 5.31" (114 x 135 mm) 506 cu. In. (8.3 L) 5.25 gal. (19.9 L) 305 HP 1900 RPM D900SCU QSC 8.3 4.49" x 5.31" (114 x 135 mm) 506 cu. In. (8.3 L) 5.25 gal. (19.9 L) 305 HP 1900 RPM D900SHCU QSC 8.3 4.49” x 5.31” (114 x 135 mm) 506 cu. In. (8.3 L) 5.25 gal. (19.9 L) 305 HP 1900 RPM
  35. 35. Dedicated to Quality & Committed to Support D1300-D1800 Off Shore Portable Series Off Shore Features: • Air End Manufactured by Sullivan-Palatek • Exclusive Three Year Warranty On Air End • Automatic 0 to 100% Capacity Control • 10” Closed Start, Pneumatic Valve • One 3” Service Connection • Oil Level Sight Gauge • Caterpillar or Cummins Engine • Noise Level Limited to Maximum of 76 dBA at 7 Meters • Automatic Shutdown and Protection System • Direct Drive-No Gears • Aluminized Fuel Tanks • IQ Package (Optional) • Enclosure Fabricated from Galvaneal and Powder Coated to Provide Maximum Corrosion Protection • Environmentally Friendly Containment Base Fabricated from Steel and Galvanized for Maximum Corrosion Protection • Galvanized Railings to Protect Machine in Close Quarters • Chalwyn Valve with Emergency Pull Handle • Heavy Duty Fuel/Water Separator • Line Backer Protection • Pull Tested Galvanized Skid with Four Point Lift • Spark Arrestor Mufflers
  36. 36. 1201 W. US Highway 20 Michigan City, IN 46360 Tel: 219-874-2497 Tel: 800-438-6203 www.sullivanpalatek.com Email: info@palatek.com TECHNICAL DATA SPECIFICATIONS Dimensions & Specifications subject to change without notice DIMENSIONS (Metric in Parentheses) OS 1300-1800 FP 09/13 1M COMPRESSOR SPECS CATERPILLAR (All CA Models) CUMMINS (All CU Models) Type Single Stage, oil flooded rotary screw Ambient Oper. Temp. Range -20º to +125ºF (-29º to +52ºC) Oil Capacity 55 gal. (208 L) Total Receiver Volume 21 ft. ³ (595 L) Air Service Connections 3” NPT Type Cooling System Oil to Air Type Air Intake System Two Stage Dry Type of Control 0-100% Demand Tire Size 8-14.5 Operating Pressure Range 70-150 psig (4.9 - 10.3 Bar) Estimated Weight, Serviced 23,800 Lbs. ENGINE SPECS CATERPILLAR CUMMINS Type Diesel Diesel Number of Cylinders 6 6 Bore and Stroke 5.39” x 6.73” (137 x 171mm) 5.39” x 6.65” (137 x 169mm) Displacement 928 in ³ (15.2 L) 915 in ³ (15 L) Total Oil Capacity 8.75 gal. (33 L) 12 gal. (45.41 L) Cooling System Capacity 18.5 gal. (70 L) 18.5 gal. (70 L) Battery Rating 24 Volts 24 Volts CCA @ 0ºF 1400 Amps per Battery 1400 Amps per Battery Idle Speed 1400 RPM 1400 RPM Fuel Tank Capacity 200 gal (757 L) 200 gal. (757 L) COMPRESSORS ENGINES Rated Delivery Rated Operating Pressure Model HP @ Rated RPM Full Load Speed CATERPILLAR D1300SHCA 1300 cfm (37 m ³/min) 150 psig (10.3 Bar) C15 ACERT 475 HP 1800 RPM D1600SCA 1600 cfm (45 m ³/min) 125 psig (8.6 Bar) C15 ACERT 475 HP 1900 RPM D1600SHCA 1600 cfm (45 m ³/min) 150 psig (10.3 Bar) C15 ACERT 540 HP 2000 RPM D1800SCA 1800 cfm (51 m ³/min) 100 psig (8.6 Bar) C15 ACERT 475 HP 2100 RPM CUMMINS D1300SHCU 1300 cfm (37 m ³/min) 150 psig (10.3 Bar) QSX15 485 HP 1800 RPM D1600SCU 1600 cfm (45 m ³/min) 125 psig (8.6 Bar) QSX15 485 HP 1900 RPM D1600SHCU 1600 cfm (45 m ³/min) 150 psig (10.3 Bar) QSX15 535 HP 2000 RPM D1800SCU 1800 cfm (51 m ³/min) 100 psig (6.9 Bar) QSX15 485 HP 2100 RPM D1800SMCU 1800 cfm (51 m ³/min) 125 psig (8.6 Bar) QSX15 535 HP 2100 RPM
  37. 37. FEATURES: ELECTRIC MOTOR 230/460 volt, NEMA T-frame, C-face, TEFC, energy efficient. ELECTRIC Cam-Lok cable connectors. MOTOR STARTER 460 volt, wye delta starter with 110 volt controls, Nema-4 enclosure, UL, ETL listed and solid state three phase overload relay. (50-HP 230/460) PROTECTIVE DEVICES Class 20 solid state overload relay, high air temperature, high pressure shutdown switches and anti-restart pressure switch, preventing starting while air compressor is pressurized. Electric Phase Reversal, Anti-reversing warning light standard. AIR INTAKE FILTER Heavy duty 2-stage CONTROLS Full modulation, solenoid controlled for smooth lowest possible no load power. Automatic start/stop or constant speed. Timed dual control. ACOUSTICAL ENCLOSURE Easy removable panels for faster maintenance and accessibility. SKID MOUNTING Complete fluid containment skid with drains. LIFTING POINT Central located lift bail for ease of loading and unloading INSTRUMENTATION Line pressure gauge, discharge pressure gauge, hour meter, temperature gauge, lube filter and separator element differential gauges. LUBE FILTER Spin on type mounted strategically for ease of maintenance. ELECTRIC CONSTRUCTION COMPRESSORS
  38. 38. MODEL 50UD 100DG 200DG 250DG 350UD 400UD COMPRESSOR DATA 60Hz Capacity, ACFM 200 440 750 900 1490 1490 Maximum full load/unload, psig 150 125 150 150 125 150 Minimum full load, psig 70 70 70 70 70 70 Motor horsepower 50 100 200 250 350 400 COOLING DATA, AIR COOLED Fan Horse Power 1HP 3 HP 5 HP 10 HP 15 HP 20HP Aftercooler approach degree F 12 10 15 15 10 10 Fluid capacity 5 GAL 10 GAL 25 GAL 25 GAL 45 GAL 45 GAL DISCHARGE PIPING, NPT FEMALE Air cooled, base mounted 1-1/4” 2” 3” 3” 3” 3” ELECTRICAL DATA Compressor Motor, FLA @460V 58 112 229 287 392 443 Compressor Motor, FLA @ 230V 116 N/A N/A N/A N/A N/A Starting Amp Requirement 140/280 300 542 690 957 1049 1201 W. US Highway 20 Michigan City, IN 46360 Tel: 219-874-2497 Tel: 800-438-6203 www.sullivanpalatek.com Email: info@palatek.com Distributed By: Electric 10/11 1m Mike Gonder, Inside Sales Manager Melissa Shepherd, Inside Sales Michael Anderson, Service Manager Ph: 219-874-2497 x7016 Ph: 219-874-2497 x7013 Ph: 219-874-2497 x7049 mgonder@palatek.com mhommey@palatek.com Cell: 219-670-0613 manderson@palatek.com
  39. 39. ® Aftercooler/Dryer Air Treatment Skid Package Aftercooler - Filter - Dryer Construction Packages The Advantages of owning a Sullivan-Palatek Dryer Skid Package: »» Operation of the desiccant dryer skid package is fully automated with all sequencing and function controlled by an electronic timing module. »» Wet compressed air discharged from the air compressor enters the Aftercooler where the compressed air temperature is reduced to near ambient. »» The coalescing prefilter removes any liquid moisture carryover. »» The regenerative dryer reduces air to -40°F. »» Aftercooler fan is available with air or electric motor. »» 100 - 4000 CFM at -40° »» Heavy duty drag/fork skid with I-beam frame and single point lift. »» Heavy duty control filter. »» High performance .01-micron coalescer »» Centrifugal separator with drain. SPS SPAF
  40. 40. 1201 W. US Highway 20 Michigan City, IN 46360 Tel: 219-874-2497 Tel: 800-438-6203 www.sullivanpalatek.com Email: info@sullivanind.com DIMENSIONS Distributed By: MODEL HEIGHT (inches) A LENGTH (inches) B WIDTH (inches) C WEIGHT (pounds) SPS-500RS 86.00 60.50 50.00 2300 SPS-1000RS 96.00 75.00 62.38 3655 SPS-1600RS 103.50 96.00 73.00 4918 SPAF-500RS 58.00 45.00 29.00 400 SPAF-1000RS 68.00 50.50 38.00 1434 SPAF-1600RS 71.00 67.00 48.00 1652 Contact Factory for Other Available Sizes Aftercooler RP 5/12 1m B A C B A C SPS Series SPAF Series
  41. 41. 1201 US Hwy 20 West · Michigan City, IN 46360 · Tel: 219-874-2497 · FAX: 219-872-5043 · www.sullivanpalatek.com SULLIVAN’S NEW WEATHER-ALL PORTABLE COMPRESSOR FLUID • Used for all weather conditions • Anti-wear additives • Anti-rust additives • Anti-foaming additives • Quick water separation • Excellent viscosity index • Extended life As of December 2010, we are now using WEATHER-ALL 5W-20 as our standard factory fill in all our portable compressors. Pricing is as follows: 5 gallon Pail P/N 00823062 0009 $130.00 list 55 gal Drum P/N 00823062 0010 $1,375.00 list Standard discount levels apply ANNOUNCING!ANNOUNCING!
  42. 42. Product Description WEATHER-ALL™ COMPRESSOR FLUID is designed for all types of rotary screw air compressors used in varying conditions encountered in the construction industry. Sullivan-Palatek’s Weather-All is formulated as a 5W-20 Multi-Viscosity fluid with additives for maximum protection against scuffing and wear to bearings and rotors. Extensive testing has shown this fluid exhibits excellent resistance to foaming, oil oxidation and corrosion. Special attention has been made toward limiting rust of ferrous metals and corrosion of yellow metals. Product Features and Benefits Our Weather-All lubricant will provide extended life compared to other brand oils. Weather-All fluid provides quick water separation which helps protect equipment in wet and humid service environments. Our compressor fluid has an excellent viscosity index (180), as well as, low pour point (-40°F). This specially formulated multi-viscosity compressor fluid provides wear control for steel and brass parts when operating at maximum pressure ratings, resulting in excellent compressor operation. Weather-All Compressor 5W-20 Fluid combines the superior additive technology and quality hydrocarbon based oils for Extended Life and is a custom-formulated lubricant specifically designed for long life under the severe, demanding conditions normally encountered in recirculating systems such as rotary screw compressors. Weather-All combines the advantages of a synthesized hydrocarbon, which results in performance improvements beyond conventional mineral oils and many synthetic oils. Characteristics: • Exceptional oxidative stability • Longer life • Low sludging tendency • Low evaporation loss • Thermal & hydrolytic stability • Improved performance • Rust and corrosion inhibited • Viscosity stability • Lower equipment maintenance • Extended anti-wear protection 1201 US Hwy 20 West · Michigan City, IN 46360 · Tel: 219-874-2497 · FAX: 219-872-5043 · www.sullivanpalatek.com Portable Compressor Fluid Multi-Viscosity ISO Viscosity Grade 32 Viscosity Index 180 SAE Viscosity Grade SW-20 Pour Point -40ºC Viscosity, cSt. 210ºF 50 SUS -40ºF 100ºF 170 SUS Flash Point 199ºC Normal Service Life 2000 Hrs These values are not intended for use in preparing specifications 5W-20
  43. 43. Product Support Handbook Portable Air Compressors 2011REVISED
  44. 44. Contact Info Sullivan-Palatek, Inc. 1201 US Hwy 20 West Michigan City, IN 46360 T: 219-874-2497 F: 219-872-5043 productsupport@palatek.com www.sullivanpalatek.com
  45. 45. iii Preface This document explains product support policies and procedures that apply to Portable Air Compressor products. Our objective is to provide superior product support and assist you in achieving your business goals. We provide superior spare parts availability, accurate technical information and prompt warranty claim resolution. We have established these operating guidelines and procedures for the conduct of business. As Sullivan-Palatek distributors, your understanding of the policies and procedures is important for efficient day-to-day business between our companies. The handbook is brief. We have addressed all of the important issues and frequently asked questions. If any issue is unclear please contact us for clarification. A list of key contact persons is included with this manual. Everyone at Sullivan-Palatek is eager to assist you. Thank you for your business and the opportunity to be of service.
  46. 46. iv A word about older products... Our distributors are occasionally asked to provide service and repair on older Sullivan products. Many parts available today can be used to make these repairs. However, not all parts are stocked or readily available. Contact our Product Support or Part Department staff to determine if we can help. Our general policy is as follows: We will continue to provide support and spare parts for products manufactured before 1998 as long as a reasonable demand exists and sources are available. Prices charged for technical documentation and support for older products reflects our costs for providing these services. We do not stock parts for which no sustainable demand exists. Non-current parts for machines produced before 1998 may not be available or may only be available under special order terms. An example is certain compressor enclosure components (fabricated sheet metal) for models no longer in production. Orders for parts in these categories, if a source is available, will be accepted on a pre-paid, non-cancelable and non-returnable basis. Some time may be required to obtain current pricing. Delivery times may be extended and will be advised at the time of order.
  47. 47. v Contents Spare Parts...................................................................................................................................................... 1 Ordering Parts................................................................................................................................................................ 1 Shipping and Freight..................................................................................................................................................... 1 Payment Terms.............................................................................................................................................................. 1 Damaged Freight........................................................................................................................................................... 1 Returns and Adjustments ........................................................................................................................................... 2 Parts Prices.................................................................................................................................................................... 2 Recommended Parts Lists............................................................................................................................................ 2 Warranty Policy............................................................................................................................................... 3 Warranty Duration......................................................................................................................................................... 3 Warranty Commencement............................................................................................................................................ 3 Diesel Engines............................................................................................................................................................... 3 Airends........................................................................................................................................................................... 3 What Is Covered............................................................................................................................................................. 3 What Is Not Covered...................................................................................................................................................... 3 Customer Responsibility............................................................................................................................................... 4 Request for Warranty Adjustment (RWA)..................................................................................................... 5 Warranty Adjustment Qualification............................................................................................................................... 5 Submitting Request for Warranty Adjustment (RWA).................................................................................................. 5 Return Stock Authorization (RSA)................................................................................................................................. 5 Warranty Adjustment Approval..................................................................................................................................... 5 Warranty Portable Compressors.................................................................................................................................... 7
  48. 48. vi
  49. 49. 1 Spare Parts Ordering Parts Place your orders with our Parts Department by telephone, telefax, SmartEquip or e-mail. • Telephone: 219-874-2497 or 800-438-6203 • Telefax: 219-872-5043 or 800-725-6203 • SmartEquip: Password required (refer to SmartEquip below) • E-mail: parts@palatek.com Please include the following information on all orders: • Purchase order number • Shipping address • Shipping instructions • Serial number of compressor • Part number, description and quantity of each part required • Contact name and telephone number, in case we have questions • Customer account number, if known The parts department operates from 8:00 AM to 5:00 PM, Central Time, Monday through Friday. Orders received before 12:00 noon will usually be shipped on the same day. In emergency “machine down” situations we will make every reasonable effort to ship parts ordered as late as 3:00 PM. Our ability to do this will be determined by the volume of orders in process on the particular day. Sullivan-Palatek participates in the SmartEquip online system. Distributors with established Sullivan- Palatek accounts are encouraged to obtain a SmartEquip login user name and password. This enables them to enter orders electronically. Contact the Parts Department about incentives for using SmartEquip and to obtain a password. Entering orders using SmartEquip is easy and includes all prompts necessary to provide the information we need to process your order. Access to the Sullivan-Palatek SmartEquip web site can be found at www.SullivanPalatek.com and click on SmartEquip or go directly to our SmartEquip web site at www.smartequip.net/sullivan/index.html. Anyone can enter as a guest to look up information and review illustrated parts lists. Shipping and Freight We ship F.O.B. our plant. Unless specified otherwise we will ship orders by UPS Ground or Motor Freight depending on size and weight. Freight charges will be prepaid and added to the invoice. Expedited shipping is available by UPS, Federal Express, DHL and others. Discuss your requirements with our Parts Department representatives. Payment Terms Established accounts that are current have “open account” status with an established line of credit. Standard terms of payment are net 30 days. Sullivan-Palatek does accept Master Card and Visa in instances where no customer account has been established, and we are unable to help by referring a customer to an established distributor for support. Damaged Freight • All orders are shipped F.O.B., Michigan City, IN. This means that the title to the goods transfers to the consignee when the freight carrier accepts the goods for transport at our plant.
  50. 50. 2 • The consignee must make freight damage claims to the delivering carrier. Do not return damaged shipments to Sullivan-Palatek. • Contact our traffic department if you require assistance or the delivering carrier fails to meet its obligation under ICC rules. • You have a limited time within which to file claims and report concealed damage. Contact the delivering carrier to determine these time limits. Returns and Adjustments Notify the Parts Department of errors, under-shipments or defective parts received within 15 days of the shipment date. All sales are considered final after 15 days from shipment. Do not return parts to Sullivan-Palatek without first obtaining a Return Stock Authorization (RSA). Shipments received without an RSA are subject to being refused by our Receiving Department. Contact our Parts Department to request an RSA. We will accept parts found to be defective upon receipt (excluding freight damaged parts) or parts shipped in error (meaning not according to your purchase order). We will also accept current parts that are surplus in your inventory if they were purchased for stock within the past 12 months. Credit toward future purchases will be allowed as follows: Defective Parts and Parts Shipped in Error For parts found to be defective upon receipt (excluding freight damaged parts) or parts shipped in error, notify us within 15 days of shipment from our plant and we will issue full credit, including prepaid return freight, upon return of the part(s) in new, undamaged condition. Surplus Spare Parts Inventory For surplus spare parts inventory, established distributors who buy spare parts for their stock to support Sullivan- Palatek products may request the return of stock in excess of their market needs. Parts will be accepted and credit issued for the net price paid for the part(s) less a restocking charge. Proof of purchase will be required (invoice or packing slip number). Certain types of parts are non-returnable. These include common hardware, gaskets, seals, fluids, and any items with limited shelf life. Parts identified as non-returnable at the time of order, non-current parts, and special-order parts are not returnable. Each line item must have an extended value (quantity X price) of at least $10. Authorized returns must be received, freight prepaid, within 45 days of the date of the return authorization or the RSA is void. To receive prompt credit and avoid complications, remember the following: • Always obtain an RSA • Ship returns freight pre-paid • Mark all boxes with RSA number and enclose a copy of the RSA as a packing list • Surplus parts returned must be in new, undamaged condition. Parts Prices We publish a Parts Price List that contains prices of frequently ordered parts. Prices of unlisted parts can be obtained by calling the Parts Department. A general price review is accomplished periodically and prices are subject to change without notice. The price list is available on CD as an MS Excel spreadsheet and Adobe PDF format. To obtain copies of the Parts Price List contact the Parts Department. Recommended Parts Lists Recommended parts lists are published in each User’s Manual for current products. These lists contain basic recommendations. For special situations our Service Department can prepare custom recommendations. Contact our Parts Department for assistance.
  51. 51. 3 Warranty Policy Warranty Duration Sullivan-Palatek, Inc. warrants its portable compressor products to be free from defects in material and workmanship for the following periods: Portable Compressors • Overall — 1 year, unlimited hours • Airend installed in a standard pressure (100 psi) and high pressure (150 psi) portable compressor — 3 years, unlimited hours • Airend installed in a “Very High” pressure (350 psi or more) compressor — 2 years, unlimited hours • Remanufactured Air Ends purchased to replace worn or damaged — 1 year Warranty Commencement To initiate the warranty the original purchaser, or the authorized Sullivan-Palatek distributor on the behalf of the purchaser, is required to complete the warranty registration form provided in the information and manuals folder with all new products. The warranty period begins with delivery of the product to the first user, whether as a sale or a rental. The maximum warranty obligation by Sullivan-Palatek is the stated warranty period plus 6 months from shipment of the product from our factory. See the product warranty statement for details. Diesel Engines The engine manufacturer warrants the engines installed in Sullivan-Palatek portable air compressors. Consult the written engine warranties for details. Registration of the engine for warranty with the manufacturer will ensure prompt warranty service from engine dealers. Customers should contact the nearest appropriate engine dealer to obtain prompt warranty service and repairs or to purchase extended warranty coverage. Note that John Deere engines in D185 through D375 compressor models have warranty coverage for up to 5 years or 5000 hours without additional cost. See the warranty information with each compressor or consult our Service Department for details. Airends The 3-year airend warranty specifically covers the stator and rotor assembly. The warranty period for related or attached components such as drive coupling, inlet valve, air-oil separator system and shaft seal is one year. What Is Covered Sullivan-Palatek obligations under its warranty include: • Repair or replace, at our option and subject to the return of failed parts when requested, any parts found to be defective in material or workmanship that fail within the warranty period. Credit will be issued at distributor net price for parts approved under warranty. • Pay reasonable labor at our published rate to repair or replace the failed part or parts. • For portable compressors with two or three axles (currently 750 cfm and higher) pay reasonable travel costs to make field repairs. Travel is not reimbursed for field repairs to Utility and single axle compressor products (currently 185 cfm through 375 cfm). Travel cost reimbursement is allowed up to a 100-mile radius and 4 hours labor per round trip. Only one trip per warranty incident will be reimbursed. What Is Not Covered • The cost of prescribed and normal maintenance and service • Consequences of negligence, misuse, accident, improper application or storage • Consequences of any modification or alteration not approved by Sullivan-Palatek
  52. 52. 4 • Necessary labor and other costs related to removing accessories or attachments installed by the distributor or customer to gain access for warranty repairs or troubleshooting • Premium or overtime labor to make repairs at the request of the customer • Labor costs in excess of what Sullivan-Palatek considers necessary or customary for a given repair • Incidental travel costs such as meals, lodging, tolls and other similar costs • Travel cost necessary to service a compressor located more than 100 miles from the servicing distributor’s location • Outside services or repairs not authorized by Sullivan-Palatek • Purchase of repair parts, other than normal shop supplies, from other than Sullivan-Palatek to make warrantable repairs unless approved in advance by Sullivan-Palatek in writing Customer Responsibility The following elements are the responsibility of the customer/ distributor under the Sullivan-Palatek warranty. • Provide written notice of warrantable failure within the warranty period. • Make the product available for repair at an authorized Sullivan-Palatek repair facility. • Pay all costs of returning failed parts to Sullivan-Palatek when requested. • Pay shipping cost for replacement parts.
  53. 53. 5 Request for Warranty Adjustment (RWA) Sullivan-Palatek distributors and rental companies established as direct accounts are authorized to perform warranty repairs. Upon completion of the repair, a Request for Warranty Adjustment (RWA) can be submitted for reimbursement in accordance with the terms and conditions of the Sullivan-Palatek warranty. Warranty Adjustment Qualification Only failures occurring during the warranty period will be considered. Claims submitted more than 30 days after the warranty period has expired will be denied. Hours reported on a claim are subject to verification. Include the service work order (distributor work order) with the RWA. Hold failed parts for possible return to Sullivan-Palatek until claim has been settled. Maintain parts in the “as failed” condition and fully assembled for our evaluation. Do not disassemble airends or parts. Disassembly will void the warranty and may result in additional cost for an exchange airend. Only new or remanufactured parts or components furnished by Sullivan-Palatek are to be used for warranty repairs. Proof of purchase of replacement parts is required and will be established by identifying the Invoice Number or Packing List Number of the order for warranty parts. The claim form provides space to list the invoice number for parts purchased to make repairs. Submitting Request for Warranty Adjustment (RWA) Submit RWA within 30 days of completion of repairs. Timely submission of claims is important. Claims submitted long after the repair date are difficult to verify and resolve. Amounts paid on late claims may be less than requested if verification and support data are missing or unavailable. The form must be completed with no fields omitted. Incomplete RWA’s will be returned and processing suspended pending the receipt of the missing information. The RWA can be submitted by email or by telefax using our RWA form: Email: productsupport@palatek.com Telefax: 219-878-8544 Return Stock Authorization (RSA) Do not return parts without a Request Stock Authorization (RSA) and always include the RSA with the parts being returned. Sullivan-Palatek will request that parts, other than air ends, be returned only when necessary to fairly and properly resolve the claim. All failed air ends must be returned to receive full warranty adjustment or the allowable core credit. Parts must be returned in the “as failed” condition and fully assembled. This is critical for fair warranty determination and correcting problems to improve our products for your benefit as a user. Claims are held in suspense pending return of parts when required. Parts must be promptly returned after receipt of the RSA to ensure timely processing of the related claim. The RWA and RSA will be suspended for 20 days from date of issue. Parts should be received at our factory within that time. Warranty Adjustment Approval Technical assistance and advice on the conduct and execution of repair does not constitute warranty approval. Only after all facts are known will Sullivan-Palatek determine the warranty outcome. We recommend that the servicing distributor make this clear to the customer and obtain a commitment from the customer to pay for any non-warranty repairs. The preceding is only to assist in the administration of warranty coverage and is not a warranty statement. Only the written warranty will control the terms and conditions.
  54. 54. 6
  55. 55. 7 Warranty Portable Compressors Sullivan-Palatek, Inc. warrants its new portable air compressor products to be free from defects in material and workmanship, subject to the following provisions: Warranty Registration: To validate the warranty for each product the purchaser shall complete and return the warranty registration form within 30 days of delivery to the first user or rental. Warranty Period: The warranty period for applicable Sullivan-Palatek products is as follows (subject to the Exclusions and Limitations noted below): Air ends on new machines – stator and rotor assembly: Single stage compressor models: the first to expire; 42 months from shipment by Sullivan-Palatek or 36 months from delivery to the first user. Two stage high pressure compressor models: the first to expire; 30 months from shipment by Sullivan-Palatek or 24 months from delivery to the first user. Remainder of new portable air compressor machines: the first to expire; 18 months from shipment by Sullivan-Palatek or 12 months from delivery to the first user. Parts, accessories and attachments sold separately from machines, excluding warranty replacement parts and hand tools: the first to expire; 6 months from shipment by Sullivan-Palatek or 3 months from delivery to the first user. Warranty replacement parts: remainder of the original warranty period of the replaced part. Sullivan-Palatek’s Obligations: Sullivan-Palatek’s exclusive obligations with respect to breach of warranty are (i) to repair or replace (at Sullivan-Palatek option and subject to return of defective parts) any defective part, (ii) to pay the reasonable cost of making the repair or reinstalling the replacement part and (iii) only for air compressors having two or more axles, to reimburse up to four hours travel labor at the travel reimbursement rate and mileage at the mileage reimbursement rate for up to 200 miles (100 miles travel radius) per event to make repairs. Customer’s Responsibility: As a condition to Sullivan-Palatek’s obligations under this warranty, Customer shall (i) give Sullivan-Palatek written notice of any warrantable failure of any Sullivan-Palatek product within the applicable warranty period, (ii) make the product available for repair at a Sullivan-Palatek authorized repair facility, (iii) pay all costs of returning failed parts to Sullivan-Palatek, (iv) pay shipping costs for replacement parts, (v) pay reasonable travel expenses for field repairs performed at customer’s request and (vi) pay the costs of investigating performance complaints that are not covered by this warranty. Exclusions and Limitations: Air end seals are not warranted. Engines, tires and batteries are not warranted by Sullivan- Palatek and are warranted only by the manufacturers of these components. Sullivan-Palatek has no obligation for product failures or defects resulting from overloading, misuse, neglect, accident, failure to comply with Sullivan-Palatek’s product manual or failure to install product improvements provided by Sullivan-Palatek. Use on a product of attachments, accessories or service parts not supplied or recommended by Sullivan-Palatek may, at Sullivan-Palatek’s option, void the warranty of that product. Sullivan-Palatek has no obligation to pay costs of returning defective parts to Sullivan-Palatek or shipping replacement parts to customer. THIS WARRANTY IS SULLIVAN-PALATEK’S ONLY WARRANTY OF ITS PORTABLE AIR COMPRESSOR PRODUCTS AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED. ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE ARE EXCLUDED. SULLIVAN-PALATEK HAS NO OBLIGATION UNDER THIS WARRANTY OR OTHERWISE (REGARDLESS OF THE FORM OF ACTION) FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING WITHOUT LIMITATION LOST PROFITS OR LOST INCOME. This warranty applies to all Sullivan-Palatek portable air compressors shipped after April 1, 2011 unless expressly superseded by a later warranty. In the event of any conflict between this warranty and earlier warranty statements, the terms of this warranty will apply.
  56. 56. Contact Info Sullivan-Palatek, Inc. 1201 US Hwy 20 West Michigan City, IN 46360 T: 219-874-2497 F: 219-872-5043 productsupport@palatek.com www.sullivanpalatek.com
  57. 57. ® M-Series Compressors CDFE CDD INDUSTRIAL AIR COMPRESSOR - 5, 7.5, 10 HP M-SERIES »» Modular oil flooded rotary screw continuous duty industrial air compressor »» 208/230/460/575 volt 3-phase open drip motor »» Full voltage magnetic starter with 115 volt control power »» Automatic dual control »» Line pressure gauge, oil temperature gauge, and hour meter »» Air cooled oil cooler/aftercooler with Palasyn 45, 4000 hour synthetic oil »» Spin on type oil filter and separator elements for ease of maintenance »» Air Filter: combination pleated and foam dry type, easily replaceable CDF/CDFE Complete compressor package with mounted refrigerated air dryer, high efficiency coalescing air filter, and receiver tank. A modulating thermostatic expansion valve gives a more effective refrigeration control over a wide span of operating conditions. It prevents compressor failure due to liquid return commonly found in capillary tube designs. CDD/CDDE Complete compressor package with mounted desiccant air dryer and high efficiency coalescing air filter. EXTENDED LIFE mounted desiccant dryer to eliminate moisture and contaminants. -40ºF Dew Point High Efficiency Coalescing Air Filter High Quality Compressed Air Filtration Particle Removal Down to 0.01 Micron Max. Oil Carryover 0.008 PPM w/w Nominal Pressure Drop 1.2 PSID ISO 8573 (Class 1) 99.9999% Efficiency (Shown with optional receiver tank)
  58. 58. 1201 W. US Highway 20 Michigan City, IN 46360 Tel: 219-874-2497 Tel: 800-438-6203 www.sullivanpalatek.com Email: info@palatek.com TECHNICAL DATA MODEL LENGTH HEIGHT WIDTH Base Mount 38.63” 26.34” 24.14” Base Mount Enclosed 38.88” 27.43” 24.46” Platform Mount with Separator Trap 38.63” 56.34” 24.14” Platform Mount Enclosed w/Sep-Trap 38.88” 57.43” 24.46” Tank Mount - 80G with Auto Drain 65.2” 48.9” 25.20” Tank Mount Enclosed - 80G w/drain 64” 50.93” 25.20” Tank Mount - 120G with Auto Drain 69.88” 51.87” 23.74” Tank Mount Enclosed - 120 G w/drain 68” 53.93” 24.46” Distributed By: SELECT THE COMBINATION THAT’S RIGHT FOR YOUR JOB Consult factory for shipping weights. COMPRESSOR DATA M5 HM5 HHM5 M7.5 HM7.5 HHM7.5 M10 HM10 HHM10 Capacity acfm 22 18 15.5 29 25 22 44 35 32 Pressure @ Full Load psig (bar) 125 (8.6) 150 (10.3) 175 (12.1) 125 (8.6) 150 (10.3) 175 (12.1) 125 (8.6) 150 (10.3) 175 (12.1) Minimum Pressure psig (bar) 60 (4.1) 60 (4.1) 60 (4.1) 60 (4.1) 60 (4.1) 60 (4.1) 60 (4.2) 60 (4.2) 60 (4.2) Motor Output (60 Hz) hp (kW) 5 (3.7) 5 (3.7) 5 (3.7) 7.5 (5.6) 7.5 (5.6) 7.5 (5.6) 10 (7.5) 10 (7.5) 10 (7.5) Motor Speed rpm 1755 1755 1755 3530 3530 3530 3515 3515 3515 Motor Output @ Full Load hp (kW) 4.6 (3.4) 5.0 (3.7) 5.2 (3.9) 10.5 (7.8) 8.2 (6.1) 7.7 (5.7) 10.9 (8.1) 9.7 (7.2) 11.2 (8.4) Motor Output @ 100 psig hp (kW) 4.3 (3.2) 3.9 (2.9) 3.3 (2.5) 7.2 (5.4) 5.6 (4.2) 5.3 (3.9) 9.8 (7.3) 8.2 (6.2) 8.2 (6.2) Driven Pulley 2.65 2.8 3.00 3.35 3.65 4.12 4.75 5.30 5.60 Drive Ratio 2.26 2.14 2.00 1.79 1.64 1.46 1.26 1.13 1.07 Rotor Diameter mm 60 60 60 60 60 60 75 75 75 COOLING DATA Fan Airflow cfm 1100 1100 1100 1100 1100 1100 1100 1100 1100 After Cooler Approach °F (°C) 20 (11) 20 (11) 20 (11) 20 (11) 20 (11) 20 (11) 20 (11) 20 (11) 20 (11) Fluid Capacity gallons (L) 1 (3.8) 1 (3.8) 1 (3.8) 1 (3.8) 1 (3.8) 1 (3.8) 1.50 (5.7) 1.50 (5.7) 1.50 (5.7) SOUND DATA Air-Cooled (Open) dba @ 1m 72 72 72 82 82 82 82 82 82 Air-Cooled (Enclosed) dba @ 1m 68 68 68 75 75 75 74 74 74 DISCHARGE PIPING Air-Cooled (Base-Mounted) NPT 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 Tank-Mounted (Tank End) NPT 2 2 2 2 2 2 2 2 2 ELECTRICAL DATA Motor FLA @ 575V (3-Phase) amps 5.5 5.5 5.5 6.8 6.8 6.8 9.6 9.6 9.6 Motor FLA @ 460V (3-Phase) amps 6.6 6.6 6.6 8.6 8.6 8.6 11.6 11.6 11.6 Motor FLA @ 230V (3-Phase) amps 13.2 13.2 13.2 17.2 17.2 17.2 23.2 23.2 23.2 Motor FLA @ 230V (1-Phase) amps 20.5 20.5 20.5 33 33 33 46 46 46 Motor FLA @ 208V (3-Phase) amps 14.7 14.7 14.7 19 19 19 24.5 24.5 24.5 Motor FLA @ 208V (1-Phase) amps 22.7 22.7 22.7 36.5 36.5 36.5 50.9 50.9 50.9 Motor FLA @ 200V (3-Phase) amps 15.3 15.3 15.3 19.8 19.8 19.8 25.5 25.5 25.5 Starter Enclosure Rating NEMA 1 1 1 1 1 1 1 1 1 Control Voltage volts 115 115 115 115 115 115 115 115 115 Motor Enclosure NEMA ODP ODP ODP ODP ODP ODP ODP ODP ODP Motor Insulation Class NEMA F F F F F F F F F Motor Service Factor NEMA 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 Motor Maximum Starts/Hour 15 15 15 12 12 12 12 12 12 M-Series RP 7/12 1M
  59. 59. ® 15-30, 40-50, 50-60 HP Line Shaft INDUSTRIAL AIR COMPRESSOR - 15-30 LSC, 40-50 LSC, 50-60 LSC COMPRESSOR: »» Continuous duty oil flooded rotary screw industrial air compressor »» 5 Year Platinum Warranty Available PILLOW BLOCK: »» Solidly mounted and aligned to compressor shaft allowing drive shaft direct connection and minimizing power loss FRAME: »» Rugged steel construction COUPLING & DRIVE: »» Compressor is flange mounted to frame for positive alignment and direct driven by low maintenance coupling »» 5 Year Platinum Warranty Available AIR INTAKE FILTER: »» Heavy duty dry type with replaceable element SEPARATOR TANK: »» ASME coded 200 PSIG sump tank, minimum pressure check valve, relief valve, high efficiency replaceable oil separator element, fluid level sight indicator and vented fill cap »» 5 Year Platinum Warranty Available MOUNTING: »» Base mounted, no special foundation required »» Optional tank and platform mounting available COOLING SYSTEM: »» Air cooled with air cooled oil cooler and aftercooler »» Compressor temperature maintained by auto adjusting thermo valve »» 5 Year Platinum Warranty Available. CONTROLS: »» Full modulation pneumatic control for smooth control »» Pilot unloader valve for minimizing power with no air demand INSTRUMENTATION: »» Air pressure and discharge temperature gauges PROTECTIVE DEVICES: »» High temperature shut down switch for interfacing to driver’s safety circuit »» Overpressure relief valve LUBRICATION: »» Factory filled with 4000 Hour Palasyn 45 »» Equipped with microfiber full flow, spin on oil filter GENERAL: »» Consult factory for options or accessories not listed
  60. 60. 1201 W. US Highway 20 Michigan City, IN 46360 Tel: 219-874-2497 Tel: 800-438-6203 www.sullivanpalatek.com Email: info@palatek.com COMPRESSOR TECHNICAL DATA Distributed By: MODEL 15-30 LSC 40-50 LSC 50-60 LSC COMPRESSOR DATA Capacity, ACFM 55-115 165-210 215-265 Maximum full load/unload, psig 125 125 125 Minimum full load, psig 60 60 60 Minimum required driver HP 20-35 47-60 65-70 Compressor RPM 1750-3550 3550-4500 4250-5250 Driven pulley C/F C/F C/F Rotor diameter 108mm 108mm 108mm L/D 1.65 1.65 2.10 COOLING DATA, AIR COOLED Fan air flow, CFM 1000-2500 3500-5000 5500-6500 Aftercooler approach degree F 15 15 15 Oil sump, fluid capacity 2.5 gal 3 gal 3.5 gal SOUND DATA (dba @ 1m) Air cooled, open 75-81 84 87-90 Note: Rated capacity in ACFM is based on standard conditions @125 psig. Capacity will vary with ambient conditions; i.e. temperature and barometric pressure, and compressor output pressure. Line Shaft RP 3/11 1.5m BASE MTD 15-30LSC 40-50LSC 50-60LSC A 55” 64” 70” B 31” 31” 31” C 30” 40” 55” Weight 400 Lbs 500 Lbs 650 Lbs AB C
  61. 61. ® Model 15 -30 CDD Compressors INDUSTRIAL AIR COMPRESSOR - Model 15-30 HP Compressor & Desiccant Dryer Package CDD/CDDE Complete compressor package with mounted desiccant air dryer, high efficiency coalescing air filter, and receiver tank. EXTENDED LIFE mounted desiccant dryer to eliminate mois- ture and contaminants. -40ºF Dew Point ELECTRIC MOTOR: »» Nema T-Frame, C-Face, double shaft, open drip proof squirrel cage induction type. »» Direct coupling to motor for positive alignment. MOTOR STARTER: »» Full voltage magnetic starter with 120 volt controls, Nema 1 enclosure, circuit breaker, transformer and three phase over load protector. AIR INTAKE FILTER: »» Multi-stage dry type with replaceable element. CONTROLS: »» Full modulation, electronically controlled for smooth operation and lowest possible no load power. Auto dual control, timed stop or constant run. INSTRUMENTATION: »» Line pressure gauge, fluid reservoir gauge, hour meter, discharge temperature gauge, oil filter and separator element differential gauges. »» Microprocessor control available. PROTECTIVE DEVICES: »» Class 20 overload relay, high temperature and overpressure shut down. COOLING SYSTEM: »» Air cooled with air cooler/aftercooler and factory filled with Palasyn 45 synthetic lubricoolant. Equipped with micro fiber full flow oil filter. AIR DRYER: »» Desiccant air dryer and coalescing air filter for moisture removal, spin on replaceable cartridges and built for -40ºF dew point. MOUNTING: »» Base mounted, no special foundation required. Optional tank, platform and acoustical enclosure available. Consult factory for dimensions and weights of optional equipment.
  62. 62. 1201 W. US Highway 20 Michigan City, IN 46360 Tel: 219-874-2497 Tel: 800-438-6203 www.sullivanpalatek.com Email: info@palatek.com COMPRESSOR TECHNICAL DATA Distributed By: MODEL 60Hz 15D 20D 25D4 25D 30D7 30DG COMPRESSOR DATA Capacity, ACFM 55 80 95 110 115 125 Maximum full load/unload, psig 120/130 120/130 120/130 120/130 120/130 120/130 Minimum full load, psig 60 60 60 60 60 70 Motor horsepower 15 20 25 25 30 30 Motor speed, RPM 1,750 1,750 1,750 3,550 3,550 1,750 BHP @ full load 14 21.5 25 27 30 34 BHP @ 100 psig 13 19.1 22.2 24 28 32 Driven rotor coupling Direct Direct Direct Direct Direct Direct Drive ratio Direct Direct Direct Direct Direct Direct Rotor diameter & L/D 108mm x 1.65 108mm x 1.65 108mm x 2.1 108mm x 1.65 108mm x 1.65 108mm x 2.3 COOLING DATA, AIR COOLED Fan air flow, CFM 1,000 2,200 2,250 2,600 2,600 4,600 Max. duct loss, “H2O 0.3 0.3 0.25 0.25 0.25 0.2 Aftercooler approach degree F 12 12 15 15 15 10 Heat rejection, BTU/hr. 34,700 51,600 59,200 68,500 71,600 81,408 Fluid capacity 3 gal. 3 gal. 3 gal. 3 gal. 3 gal. 6 gal. COOLING DATA, WATER COOLED GPM w/60 deg. F. water 1.5 2.3 3 3 3 4 GPM w/70 deg. F. water 1.9 2.9 3.7 3.7 3.7 4.4 GPM w/80 deg. F. water 2.5 3.8 5 5 5 6 Max. water temp., deg. F. 85 85 85 85 85 85 Water connection in-out 3/4”-3/4” 3/4”-3/4” 3/4”-3/4” 3/4”-3/4” 3/4”-3/4” 3/4”-3/4” SOUND DATA (dba @ 1m) Air cooled, open 78 80 81 88 88 82 Air cooled, enclosed 72 72 74 80 78 78 Water cooled, open 75 82 77 87 87 80 Water cooled, enclosed 76 77 73 80 82 70 DISCHARGE PIPING, (FNPT) Air cooled, base mounted 1” 1” 1” 1” 1” 1” Water cooled, base mtd. 1” 1” 1-1/2” 1-1/2” 1-1/2” 1-1/2” Tank mtd. (@ tank end) 2” 2” 2” 2” 2” 2” ELECTRICAL DATA Motor, FLA @ 575V 15.4 20.8 27.2 23.2 28.0 31.2 Motor, FLA @ 460V 19.2 26.0 34.0 29.0 35.0 39 Motor, FLA @ 230V 38.4 52.0 68.0 58.0 70.0 78 Motor, FLA @ 208V 42.7 57.5 75.2 64.1 77.4 86.3 Motor, FLA @ 200V 44.2 59.8 74.0 66.7 89.0 89.7 Circuit Breaker Control 115 V 115 V 115 V 115 V 115 V 115 V CDD RP 2/11 1.5m
  63. 63. ® “The Ultimate Performance Rotary Screw Air Compressor” Shown with optional tank mount INDUSTRIAL AIR COMPRESSOR - 15-40 HP D Series 15 - 40 HP Compressors Features: • Electric Motor 208, 230, 460, 575 Volts • Motor Starter - 208/230/460/575 Volt (15-25 HP) 460/575 Volt (30-40 HP) • Protective Devices • Oil Level Sight Glass • ASME Coded 200 PSI Separator/Sump Tank • Direct Drive Coupling • Quality Instrumentation • All new Platinum and Platinum-Plus Warranties available.
  64. 64. The advantages of owning a Sullivan-Palatek Rotary Screw Air Compressor Sullivan-Palatek manufactures one of the most reliable, high performance, low maintenance air ends in the industry.* Our advanced rotor design features oversize radial thrust bearings and precision working rotary screws that provide virtually no wear. With less friction and less heat, compressors run cool and the circulating fluid lasts longer. Standard Features: Electric Motor 208/230/460/575 volt (15-25 HP) 230/460/575 volt (30-40 H.P.) Nema T-frame, C-face, open drip proof squirrel cage induction type, energy efficient. Motor Starter 208/230/460/575 volt (15-25 HP) 460/575 volt (30-40 HP), Optional 208/230 volt for 30-40HP. Full voltage magnetic starter with 110 volt controls, Nema-1 enclosure, ETL listed, UL certified, solid state control circuit breaker protection and three phase overload with reset button and phase protection. Other voltages available. Protective Devices Class 20 solid state overload relay, high tempera- ture and over pressure shut-down switches, and an anti-restart pressure switch preventing starting while air compressor is pressurized. ASME safety relief valve. *Air End Warranty, 2 years. Extended 5-year Superior Platinum Warranty or NEW Platinum-PLUS Warranty available with purchase of genuine Sullivan-Palatek parts and fluids. Description, Specifications and Pictures represented in this brochure may vary from actual equipment purchased. Lube Fill & Level Elbow One piece lube fill elbow and level sight glass. Vented cap for pressure release when removing. Air Intake Filter Oversized dry type. Primary and secondary element. Easily replaced. Inlet/Check Valve One piece housing for dependable performance and complete modulation control. Coupling & Drive Compressor is flange mounted to motor C-face for positive alignment and direct drive. The coupling element has a 1 year warranty.* Separator Tank ASME coded 200PSIG tank, safety relief valve, minimum pressure/check valve, high efficiency replaceable air/lube separator element and oil return flow sight glass. “The Ultimate Performance R
  65. 65. Controls Full modulation, solenoid controlled for smooth transition to lowest possible no load power. Automatic start/stop or constant speed selector switch. Timed dual control. Instrumentation Line pressure gauge, discharge pressure gauge, hour meter, temperature gauge, lube filter and separator element differential gauges. Acoustical Enclosure (optional) Easy removable panels for faster maintenance and accessibility. Inlet cooling air filter replaceable element for clean quiet performance. Elevated Platform (optional) 19” High, for easy maintenance. Microprocessor (optional) Easy to read output, English is standard, French and Spanish languages available. Tank Mounted (optional) ASME coded 120, 200 and 240 gallon air receivers are readily available. Rotary Screw Air Compressor” 15D 20D 25D 25D4 30D7 40D 125 psi 55 80 110 95 115 166 150 psi 54 78 95 95 110 115 175 psi N/A 53 80 N/A 105 110 Capacity Water Cooled Option Available

×