Download

612 views

Published on

Published in: Business
0 Comments
1 Like
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total views
612
On SlideShare
0
From Embeds
0
Number of Embeds
193
Actions
Shares
0
Downloads
13
Comments
0
Likes
1
Embeds 0
No embeds

No notes for slide

Download

  1. 1. Shackles Applications Shackles are used in lifting and static systems as removable links to connect (steel) wire rope, chain and other fittings. Screw pin shackles are used mainly for non-permanent applications. Safety bolt shackles are used for long-term or permanent applications or where the load may slide on the pin causing rotation of the pin. Chain or dee shackles are mainly used on one-leg systems whereas anchor or bow shackles are mainly used on multi-leg systems. Range Van Beest offers a wide range of bow and dee shackles, depending on the application on which the shackle is going to be used; the range stretches from Working Load Limit (WLL) 0.33 tons to 1500 tons. Therefore, our customers have a very extensive range to choose the shackle exactly suitable for the application. Most of the shackles are directly available from stock. Furthermore, shackles can be supplied to many standards such as the US Federal Specification RR-C-271, EN 13889, British Standard 3032, DIN 82101, DIN 82016 etc. Polar shackles are for use in extreme climatic conditions with material properties guaranteed up to temperatures of -40oC, and furthermore we offer a wide range of general commercial shackles, which are not suitable for lifting but merely for fixing purposes. Design 1 All Van Beest shackles have a specific design for a specific application. Examples are the “Super” shackles which are made out of grade 8 steel enabling the dimensions of the shackles to be minimized for use in limited space 2 conditions, without loss of functionality or Working Load Limit. Or sling shackles for use with large slings, to provide a better radius to the sling being used. Another example of functional design is the use of shackles where the pin has a square sunken hole so as not to obstruct the use of fishing nets. These are all examples of a highly functional design, to optimize the use of the Van Beest shackles 3 in daily use. Furthermore, shackles used for lifting applications are stamped with the following marks, to specify the quality 4 and safety of use of the shackles: - Working Load Limit ■ i.e. WLL 25 T 5 - - manufacturer’s identification symbol traceability code ■ ■ i.e. Bs, indicating Van Beest i.e. H pertaining to a particular batch - steel grade ■ i.e. 4, 6, 8 - CE conformity code ■ i.e. CE, Conformité Européen indicating that the product is suitable 6 for lifting purposes. Van Beest Green Pin® shackles meet all relevant requirements of the Machinery Directive 98/37/EC and all latest 7 amendments. 8 Finish Shackles supplied by Van Beest can be either hot dipped galvanized, electro-galvanized, painted or self colou- 9 red, depending on the type of shackle and its application. Please consult the product section further on for each type of shackle what finish the product has.10111213141516 10
  2. 2. ShacklesCertificationUpon request at time of order, all load rated shackles can be supplied with any of the following documents orcertificates:- works certificate in accordance with EN 10204 - 2.1 or 2.2;- certificate of basic raw material in accordance with EN 10204 - 3.1;- manufacturer test certificate;- EC Declaration of Conformity in accordance with annex IIA of the machine directive 98/37/EC;- inspection certificate in accordance with EN 10204 - 3.2;- proof load test certificate;- certificate with the actual breaking load experienced on tested samples;- test report of Magnetic Particle Inspection (M.P.I.);- test report of Ultrasonic Inspection (U.S.).The first four of the above mentioned certificates can be supplied at no extra charge. For all other certificates,additional costs will be charged.The test certificates can be supplied surveyed by all official classification societies, such as Lloyd’s, Det NorskeVeritas, British Standards Bureau, American Bureau of Shipping, Germanischer Lloyd’s or any other officiallycertified inspection body.Green Pin Standard Shackles and Green Pin Polar Shackles are DNV type approved to certification Note 2.7-1,lifting sets for offshore containers. 1Instructions for use 2Shackles should be inspected before use to ensure that:• all markings are legible; 3• the body and pin are both identifiable as being of the same size, type and make;• the threads of the pin and the body are undamaged;•• never use a safety bolt type shackle without using the split cotter pin; the body and the pin are not distorted or unduly worn; 4• the body and pin are free from nicks, gouges, cracks and corrosion;•• shackles may not be heat treated as this may affect their Working Load Limit; never modify, repair or reshape a shackle by welding, heating or bending as this will affect the Working Load 5 Limit. 6AssemblyEnsure that the pin is correctly screwed into the shackle eye, i.e. tighten hand-tight, then secure using a wrenchor other suitable tool so that the collar of the pin is fully seated on the shackle eye. Ensure that the pin is of the 7correct length so that it penetrates the full depth of the screwed eye and allows the collar of the pin to seat onthe surface of the shackle eye. 8Incorrect seating of the pin may be due to a bent pin, too tight fitting thread or misalignment of the pin holes.Do not use the shackle under these circumstances. Never replace a shackle pin except with one of the samesize, type and make as it may not be suitable for the loads imposed. 9Select the correct type of shackle and its Working Load Limit for the particular application. Should extremecircumstances or shock loading be applicable, this must be well taken into account on selecting the correctshackle. Please note that commercial shackles are not to be used for lifting applications. 10Make sure that the shackle is supporting the load correctly, i.e. along the axis of the shackle body centreline,avoid introduction of bending loads, unstable loads and do not apply overloads. 11 12 13 14 15 16 11
  3. 3. Shackles Side loads Side loads should be avoided as well, as the products are not designed for this purpose. If side loads cannot be avoided, the following reduction factors must be taken into account: Reduction for side loading Load angle New Working Load Limit 0° 100% of original Working Load Limit 45 ° 70% of original Working Load Limit 90 ° 50% of original Working Load Limit In-line loading is considered to be a load perpendicular to the pin and in the plane of the bow. Load angles in the table are the deviating angles from the in line loads. When using shackles in connection with multi-leg slings, due consideration should be given to the effect of the 1 angle between the legs of the sling. As the angle increases, so does the load in the sling leg and consequently in any shackle attached to that leg. 2 3 4 5 When a shackle is used to connect two slings to the hook of a lifting device, a bow type shackle must be assem- 6 bled with the slings in the shackle body and the hook engaged with the shackle pin. The angle between the slings should not exceed 120°. 7 To avoid eccentric loading of the shackle a loose spacer may be used on either end of the shackle pin. Do not reduce the width between the shackle jaws by welding washers or spacers to the inside faces of the eyes or by closing the jaws, as this will affect the properties of the shackle. 8 910111213 RIGHT WRONG When a shackle is used to secure the top block of a set of wire rope blocks the load on this shackle is increased14 by the value of the hoisting effect.1516 12
  4. 4. ShacklesAvoid applications where due to movement (e.g. of the load or the rope) the shackle pin can rotate and possiblybe unscrewed. If such an application is necessary or when the shackle is to be left in place for a prolonged periodor where maximum pin security is required, use a shackle with a safety bolt, nut and split cotter pin.Shackles should not be immersed in acidic solutions or exposed to acid fumes or other chemicals that arepotentially harmful for the shackle. Please be aware that these types of chemicals are used in certain productionprocesses.Point loading 1Most of the times the load bearing component that is in connection with a shackle is of a rounded shape. Pointloading of shackles is allowed but the minimum diameter of a rounded component should be equal or biggerthan the bow size of the shackle being used.Bigger diameters and or flat parts (at shackle pin side) to increase contact area can be beneficial. Sharp edges 2should be avoided. 3TemperatureIf extreme temperature situations are applicable, the following load reduction must be taken into account: 4 Reduction for elevated temperaturesTemperature up to 200°C New Working Load Limit 100% of original Working Load Limit 5 200 - 300°C 90% of original Working Load Limit 300 - 400°C 75% of original Working Load Limit > 400°C not allowed 6The rating of shackles to EN 13889 assumes the absence of exceptionally hazardous conditions. Exceptionallyhazardous conditions include offshore activities, the lifting of persons and the lifting of potentially dangerousloads such as molten metals, corrosive materials or fissile materials. In such cases a competent person should 7assess the degree of hazard and the safe working load should be reduced accordingly from the Working LoadLimit. 8Inspection 9It is required that the shackles are regularly inspected and that the inspection should take place in accordancewith the safety standards given in the country of use. This is required because the products in use may beaffected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the materialstructure. 10Inspection should take place at least every six months and even more frequently when the shackles are used insevere operating conditions. 11Proofload testingIt is required that the shackles are regularly proofload tested and that the testing should take place in accor- 12dance with the safety standards given in the country of use. This is required because the products in use maybe affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the materialstructure. Proofload testing should take place at least every 4 years and more frequently when the shackles are 13used in severe operating conditions. 14 15 16 13
  5. 5. Shackles Green Pin® Standard Shackles bow shackles with screw collar pin • Material : bow and pin high tensile steel, Grade 6, quenched and tempered • Safety Factor : MBL equals 6 x WLL • Standard : EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 2, Grade A • Finish : hot dipped galvanized • Temperature Range : -20°C up to +200°C • Certification : at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity G-4161 working diameter diameter diameter width width length width length length width weight load bow pin eye eye inside inside bow bolt each limit a b c d e f g h i j tons mm mm mm mm mm mm mm mm mm mm kg 0.33 5 6 12.5 5 9.5 22 16 41 31 28 0.02 0.5 7 8 17 7 12 29 20 54 40 37 0.05 0.75 9 10 21 9 13.5 32 22 61 49 42 0.1 1 10 11 23 10 17 36.5 26 71 56 49 0.14 1.5 11 13 26 11 19 43 29 80 68 54 0.19 2 13.5 16 34 13.5 22 51 32 91 76 63 0.36 3.25 16 19 40 16 27 64 43 114 93 79 0.63 1 4.75 19 22 47 19 31 76 51 136 107 94 1.01 6.5 22 25 53 22 36 83 58 157 123 107 1.5 8.5 25 28 60 25 43 95 68 176 141 124 2.21 2 9.5 12 28 32 32 35 67 74 28 32 47 51 108 115 75 83 197 218 158 176 137 154 3.16 4.31 13.5 35 38 80 35 57 133 92 240 192 170 5.55 17 38 42 89 38 60 146 99 262 208 183 7.43 3 25 45 50 104 45 74 178 126 314 250 226 12.84 35 50 57 111 50 83 197 138 358 281 250 18.15 42.5 57 65 134 57 95 222 160 414 321 287 26.29 4 55 65 70 145 65 105 260 180 463 355 329 37.6 5 In inch working diameter diameter diameter width width length width length length width weight 6 load bow pin eye eye inside inside bow bolt each limit a b c d e f g h i j 7 tons 0.33 inch 3 inch /16 1 inch /4 1 /2 inch 3 /16 inch 3 /8 inch 7 /8 inch 5 /8 1 inch 5 /8 1 inch 1 /4 1 inch 1 /8 lbs 0.05 1 5 11 9 1 5 25 1 9 1 0.5 /4 /16 /16 /32 /2 1 /32 /32 2 /8 1 /16 1 /2 0.11 5 3 13 11 17 9 7 3 15 11 0.75 /16 /8 /16 /32 /32 1 /32 /8 2 /8 1 /16 1 /16 0.22 8 1 3 /8 7 /16 29 /32 3 /8 11 /16 1 7 /16 1 2 25 /32 2 3 /16 1 15 /16 0.3 7 1 1 7 3 23 5 5 11 1 1.5 /16 /2 1 /32 /16 /4 1 /32 1 /32 3 /32 2 /16 2 /8 0.42 1 5 11 17 7 9 19 1 2 /2 /8 1 /32 /32 /8 2 1 /32 3 /32 3 2 /2 0.79 9 3.25 5 3 /8 3 7 /4 1 19 7 /32 5 3 /8 1 3 1 /32 2 17 /32 1 23 /32 4 1 11 /2 3 11 3 /16 3 1 23 /8 1.38 4.75 /4 /8 1 /8 /4 1 /4 3 2 5 /32 4 /16 3 /32 2.22 7 3 7 7 9 9 5 13 3 6.5 /8 1 2 /32 /8 1 /16 3 /32 2 /32 6 /32 4 /16 4 /16 3.3110 8.5 9.5 1 1 1 /8 1 1 1 1 /8 /4 2 2 11 5 /32 /8 1 1 1 /8 1 1 23 7 /32 /8 3 4 3 1 /4 /4 2 2 11 15 /16 /16 6 7 29 3 /32 /4 5 6 9 3 /16 /16 4 5 7 3 /8 /8 4.86 6.97 1 3 29 9 17 9 9 29 1 12 1 /4 1 /8 2 /32 1 /32 2 4 /32 3 /32 8 /16 6 /32 6 /32 9.49 3 1 5 3 1 1 5 7 9 11 13.5 1 /8 1 /2 3 /32 1 /8 2 /4 5 /4 3 /8 9 /16 7 /16 6 /16 12.2411 17 1 1 /2 1 5 /8 3 1 /2 1 17 /32 2 11 /32 5 3 /4 3 29 /32 10 5 /16 8 3 /16 7 3 /16 16.37 3 1 25 29 15 11 13 29 25 1 /4 2 4 /8 1 /32 2 /32 7 4 /16 12 /32 9 /16 8 /32 28.31 1 11 31 9 3 7 3 3 13 35 2 2 /4 4 /32 1 /32 3 /32 7 /4 5 /16 14 /32 11 /32 9 /16 40.0112 42.5 55 2 2 1 1 /4 /2 2 2 9 3 /16 /4 5 5 9 3 /32 /4 2 2 1 9 /4 /16 3 4 3 1 /4 /8 8 10 3 1 /4 /4 6 7 9 3 /32 /32 16 18 5 1 /16 /4 12 14 5 /8 11 12 5 15 /16 /16 57.96 82.8913141516 14
  6. 6. Shackles Green Pin® Standard Shackles bow shackles with safety bolt • Material : bow and pin high tensile steel, Grade 6, quenched and tempered • Safety Factor : MBL equals 6 x WLL • Standard : EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 3, Grade A • Finish : hot dipped galvanized • Temperature Range : -20°C up to +200°C • Certification : at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of ConformityG-4163 working diameter diameter diameter width width length width length length width thickness weight load bow pin eye eye inside inside bow bolt nut each limit a b c d e f g h i j k tons mm mm mm mm mm mm mm mm mm mm mm kg 0.5 7 8 17 7 12 29 20 54 43 37 4 0.06 0.75 9 10 21 9 13.5 32 22 61 51 42 5 0.11 1 10 11 23 10 17 36.5 26 71 61 49 8 0.16 1.5 11 13 26 11 19 43 29 80 68 54 11 0.22 2 13.5 16 34 13.5 22 51 32 91 83 63 13 0.42 3.25 16 19 40 16 27 64 43 114 99 79 17 0.74 4.75 19 22 47 19 31 76 51 136 115 94 20 1.18 6.5 22 25 53 22 36 83 58 157 131 107 23 1.77 1 8.5 25 28 60 25 43 95 68 176 151 124 25 2.58 9.5 28 32 67 28 47 108 75 197 167 137 28 3.66 12 13.5 32 35 35 38 74 80 32 35 51 57 115 133 83 92 218 240 179 198 154 170 31 34 4.91 6.54 2 17 38 42 89 38 60 146 99 262 202 183 19 8.19 25 45 50 104 45 74 178 126 314 244 226 24 14.22 35 50 57 111 50 83 197 138 358 270 250 27 19.85 3 42.5 57 65 134 57 95 222 160 414 302 287 30 28.33 55 65 70 145 65 105 260 180 463 330 329 33 39.59 85 75 83 163 75 127 329 190 556 376 355 40 62 4 In inch 5 working diameter diameter diameter width width length width length length width thickness weight load bow pin eye eye inside inside bow bolt nut each 6 limit a b c d e f g h i j k tons 0.5 inch 1 /4 inch 5 /16 inch 11 /16 inch 9 /32 inch 1 /2 inch 1 5/32 inch 25 /32 inch 2 1/8 inch 1 23/32 inch 1 1/2 inch 5 /32 lbs 0.13 7 5 3 13 11 17 0.75 /16 /8 /16 /32 /32 1 9/32 7 /8 2 3/8 2 1 11/16 3 /16 0.25 3 7 29 3 11 1 /8 /16 /32 /8 /16 1 7/16 1 2 25/32 2 3/8 1 15/16 5 /16 0.34 1.5 7 /16 1 /2 1 1/32 7 /16 3 /4 1 23/32 1 5/32 3 5/32 2 11/16 2 1/8 7 /16 0.48 8 1 5 2 /2 /8 1 11/32 17 /32 7 /8 2 1 9/32 3 19/32 3 9/32 2 1/2 17 /32 0.92 5 3 3.25 /8 /4 1 19/32 5 /8 1 3/32 2 17/32 1 23/32 4 1/2 3 29/32 3 1/8 11 /16 1.62 4.75 3 7 /4 7 /8 1 7/8 3 /4 1 1/4 3 2 5 11/32 4 17/32 3 23/32 25 /32 2.59 9 6.5 /8 1 2 3/32 7 /8 1 7/16 3 9/32 2 9/32 6 5/32 5 5/32 4 3/16 29 /32 3.9 8.5 1 1 1/8 2 11/32 1 1 23/32 3 3/4 2 11/16 6 29/32 5 15/16 4 7/8 1 5.69 12 9.5 1 1/8 1 1/4 1 1/4 1 3/8 2 5/8 2 29/32 1 1/8 1 9/32 1 7/8 2 4 1/4 4 17/32 2 15/16 3 9/32 7 3/4 8 9/16 6 19/32 7 1/32 5 3/8 6 3/32 1 1/8 1 1/4 8.06 10.81 10 13.5 1 3/8 1 1/2 3 5/32 1 3/8 2 1/4 5 1/4 3 5/8 9 7/16 7 25/32 6 23/32 1 11/32 14.42 17 1 1/2 1 5/8 3 1/2 1 17/32 2 11/32 5 3/4 3 29/32 10 5/16 7 15/16 7 3/16 3 /4 18.06 25 1 3/4 2 4 1/8 1 25/32 2 29/32 7 4 15/16 12 11/32 9 19/32 8 29/32 1 5/16 31.34 11 35 2 2 1/4 4 11/32 2 31/32 3 9/32 7 3/4 5 7/16 14 3/32 10 5/8 9 13/16 1 3/32 43.77 42.5 2 1/4 2 9/16 5 9/32 2 1/4 3 3/4 8 3/4 6 9/32 16 5/16 11 7/8 11 5/16 1 3/16 62.46 55 85 2 1/2 3 2 3/4 3 1/4 5 3/4 6 7/16 2 9/16 2 15/16 4 1/8 5 10 1/4 12 15/16 7 3/32 7 1/2 18 1/4 21 29/32 13 14 25/32 12 15/16 14 1 5/16 87.27 1 19/32 136.69 12 13 14 15 16 15
  7. 7. Shackles Green Pin® Standard Shackles dee shackles with screw collar pin • Material : bow and pin high tensile steel, Grade 6, quenched and tempered • Safety Factor : MBL equals 6 x WLL • Standard : EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVB Class 2, Grade A • Finish : hot dipped galvanized • Temperature Range : -20 °C up to +200 °C • Certification : at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity G-4151 working diameter diameter diameter width width length length length weight load bow pin eye eye inside inside bolt each limit a b c d e f g h tons mm mm mm mm mm mm mm mm kg 0.33 5 6 12.5 5 9.5 19 38 31 0.02 0.5 7 8 17 7 12 22 47 40 0.05 0.75 9 10 21 9 13.5 26 56 49 0.09 1 10 11 23 10 17 32 66 56 0.14 1.5 11 13 26 11 19 37 74 68 0.19 2 13.5 16 34 13.5 22 43 85 76 0.32 3.25 16 19 40 16 27 51 105 93 0.54 1 4.75 19 22 47 19 31 59 125 107 0.87 6.5 22 25 53 22 36 73 144 123 1.34 8.5 25 28 60 25 43 85 161 141 2.08 2 9.5 12 28 32 32 35 67 74 28 32 47 51 90 94 179 199 158 176 2.77 3.72 13.5 35 38 80 35 57 115 220 192 5.14 17 38 42 89 38 60 127 239 208 6.85 3 25 45 50 104 45 74 149 283 250 11.45 35 50 57 111 50 83 171 333 281 16.86 42.5 57 65 134 57 95 190 360 321 24.61 4 55 65 70 145 65 105 203 399 355 32.65 5 In inch working diameter diameter diameter width width length length lenght weight 6 load bow pin eye eye inside inside bolt each limit a b c d e f g h 7 tons 0.33 inch 3 /16 inch 1 /4 inch 1 /2 inch 3 /16 inch 3 /8 inch 3 /4 inch 1 17/32 inch 1 1/4 lbs 0.04 1 5 11 9 1 7 0.5 /4 /16 /16 /32 /2 /8 1 7/8 1 9/16 0.11 5 3 13 11 17 0.75 /16 /8 /16 /32 /32 1 1/32 2 3/16 1 15/16 0.2 8 1 3 /8 7 /16 29 /32 3 /8 11 /16 1 1/4 2 19/32 2 3/16 0.3 7 1 1.5 /16 /2 1 1/32 7 /16 3 /4 1 1/2 2 29/32 2 11/16 0.42 1 5 2 /2 /8 1 11/32 17 /32 7 /8 1 23/32 3 11/32 3 0.7 9 3.25 5 3 /8 3 7 /4 1 19/32 5 /8 1 3/32 2 4 1/8 3 11/16 1.19 4.75 /4 /8 1 7/8 3 /4 1 1/4 2 5/16 4 29/32 4 3/16 1.92 7 6.5 /8 1 2 3/32 7 /8 1 7/16 2 7/8 5 11/16 4 13/16 2.9510 8.5 9.5 1 1 1/8 1 1/8 1 1/4 2 11/32 2 5/8 1 1 1/8 1 23/32 1 7/8 3 11/32 3 9/16 6 5/16 7 1/32 5 9/16 6 3/16 4.59 6.1 12 1 1/4 1 3/8 2 29/32 1 9/32 2 3 23/32 7 13/16 6 29/32 8.2 13.5 1 3/8 1 1/2 3 5/32 1 3/8 2 1/4 4 17/32 8 11/16 7 9/16 11.3311 17 1 1/2 1 5/8 3 1/2 1 17/32 2 11/32 5 9 3/8 8 3/16 15.1 25 1 3/4 2 4 1/8 1 25/32 2 29/32 5 7/8 11 5/32 9 13/16 25.23 35 2 2 1/4 4 11/32 1 31/32 3 9/32 6 3/4 13 1/8 11 3/32 37.1712 42.5 55 2 1/4 2 1/2 2 9/16 2 3/4 5 9/32 5 3/4 2 1/4 2 9/16 3 3/4 4 1/8 7 1/2 8 14 5/32 15 23/32 12 5/8 14 54.26 71.9813141516 16
  8. 8. Shackles Green Pin® Standard Shackles dee shackles with safety bolt • Material : bow and pin high tensile steel, Grade 6, quenched and tempered • Safety Factor : MBL equals 6 x WLL • Standard : EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVB Class 3, Grade A • Finish : hot dipped galvanized • Temperature Range : -20 °C up to +200 °C • Certification : at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of ConformityG-4153 working diameter diameter diameter width width length length length thickness weight load bow pin eye eye inside inside bolt nut each limit a b c d e f g h i tons mm mm mm mm mm mm mm mm mm kg 2 13.5 16 34 13.5 22 43 85 83 13 0.39 3.25 16 19 40 16 27 51 105 99 17 0.67 4.75 19 22 47 19 31 59 125 115 20 1.08 6.5 22 25 53 22 36 73 144 131 23 1.66 8.5 25 28 60 25 43 85 161 151 25 2.46 9.5 28 32 67 28 47 90 179 167 28 3.4 12 32 35 74 32 51 94 199 179 31 4.51 13.5 35 38 80 35 57 115 220 198 34 6.1 1 17 38 42 89 38 60 127 239 202 19 7.63 25 45 50 104 45 74 149 283 244 24 13.25 35 42.5 50 57 57 65 111 134 50 57 83 95 171 190 333 360 270 302 27 30 18.53 25.94 2 55 65 70 145 65 105 203 399 330 33 35.33 85 75 83 163 75 127 229 455 376 40 52.97 3 4 In inch 5 working diameter diameter diameter width width length length length thickness weight load bow pin eye eye inside inside bolt nut each 6 limit a b c d e f g h i tons 2 inch 1 /2 inch inch 5 /8 1 11 /32 inch 17 /32 inch 7 /8 inch 1 23 /32 inch 3 11 /32 inch 3 9 /32 inch 17 /32 lbs 0.85 7 5 3 19 5 3 1 29 11 3.25 /8 /4 1 /32 /8 1 /32 2 4 /8 3 /32 /16 1.48 3 7 7 3 1 5 29 17 25 4.75 /4 /8 1 /8 /4 1 /4 2 /16 4 /32 4 /32 /32 2.39 6.5 7 /8 1 2 3 /32 7 /8 1 7 /16 2 7 /8 5 11 /16 5 5 /32 29 /32 3.66 8 1 11 23 11 5 15 8.5 1 1 /8 2 /32 1 1 /32 3 /32 6 /16 5 /16 1 5.42 1 1 5 1 7 9 1 9 1 9.5 1 /8 1 /4 2 /8 1 /8 1 /8 3 /16 7 /32 6 /16 1 /8 7.5 12 1 1 3 /4 1 3 1 /8 2 29 5 /32 1 9 3 /32 2 1 3 23 17 /32 7 13 11 /16 7 1 25 /32 1 1 11 /4 9.95 9 13.5 1 /8 1 /2 3 /32 1 /8 2 /4 4 /32 8 /16 7 /32 1 /32 13.45 1 5 1 17 11 3 15 3 17 1 /2 1 /8 3 /2 1 /32 2 /32 5 9 /8 7 /16 /4 16.82 25 35 1 2 3 /4 2 2 1 /4 4 4 1 11 /8 /32 1 1 25 31 /32 /32 2 3 29 9 /32 /32 5 6 7 3 /8 /4 11 13 5 1 /32 /8 9 10 19 5 /32 /8 1 1 15 3 /16 /32 29.21 40.86 10 1 9 9 1 3 1 5 29 3 42.5 2 /4 2 /16 5 /32 2 /4 3 /4 7 /2 14 /32 11 /32 1 /16 57.19 1 3 3 9 1 23 5 55 2 /2 2 /4 5 /4 2 /16 4 /8 8 15 /32 13 1 /16 77.89 85 3 3 1 /4 6 7 /16 2 15 /16 5 9 17 29 /32 14 25 /32 1 19 /32 116.77 11 12 13 14 15 16 17

×