Published on


1 Like
  • Be the first to comment

No Downloads
Total views
On SlideShare
From Embeds
Number of Embeds
Embeds 0
No embeds

No notes for slide


  1. 1. Main OfficeGunners Guns Advanced Guns Parts Gallery Behind the scenes FAQ Contact Super Maul Super Maul Ruler of the Office Cluster MaulOfficeDepot:Ink &TonerInk & TonerCartridges forLess at OfficeDepot - SaveOnline.www.O …Promo This was the first advanced gun and was constructed by Geir. It is made by assembling several Mauly clips andPapermate a thick rubber band and has tremendous firepower. With a regular pencil as projectile it can penetrate thickPens cardboard and empty soda cans. Never point this gun at anyone!From $.25/ea.Free Setup & This gun is not practical for random battles, but more of a gun for the determined assassin. This gun ISShpg. A+ BBBRating. No dangerous!hidden FactsUsed OfficeFurniture Velocity (average) 28.8 m/sLiquidated Usedand New - pricesfar less than the Velocity (max) 34.4 m/scompetion!www.NO Range 16.20 mQuill® Office CEP @ 2 m (50%) 5.9 cmSuppliesThe Savings You CEP @ 2 m (100%) 20.0 cmNeed Are Alw aysHere. ShopSeptember Loading time 7sMonthly Deals!www.Q /Specials … 4x Mauly 51 Launcher 3x Mauly 32 rubber band Pencil Projectile Larcona staple remover Pencil: 4.0 g Projectile weight Larcona: 18.0 g Assembly converted by
  2. 2. Remove the handles on the Mauly 32s. Mount a Mauly 51 on the outside of two Mauly 32s as seen in the picture. Mount another Mauly 51 on the end of the Mauly 32 which isnt entirely covered by the first Mauly 51. Then put the third Mauly 32 on the end, as seen in the picture. Remove the handles on the two Mauly 51s. Note that the gun has been flipped around in the picture. Put the rubber band around the row of Mauly 32s and mount a Mauly 51 on the outside. Make sure the rubber band isnt caught between the Mauly 51 and the rest of the gun. It has to be able to travel freely. Mount the last Mauly 51 the same way as in the last step. Remove the handles on the two Mauly 51s. Make sure the position of the two Mauly 51s on top is offseted a bit. This makes the gun more stable and easier to fire. This is the final step. Stretch the rubber band and put it along the outside of the gun. As seen in the picture, there should be a double layer of rubber band on the end of the gun.Make sure the row of Mauly 32s dont have any gaps between them and that they are alignedproperly. Failing to do so may peel off the outer parts of your pencil and reduce fire power and accuracy. converted by
  3. 3. Firing Put the pencil through the row of Mauly 32s with the bottom end first. Push until it pushes the rubber band on the other side. Keep the pencil in position with the hand holding the Super Maul and grab the end of the pencil with your other hand and pull. The longer you pull the further the pencil will go, but make sure you dont pull it too far. A reasonable part of the pencil has to stay in the barrel to get decent accuracy. Aim the gun at your intended target and release the pencil. Mount a laser pen on top or bottom for improved accuracy. Plus it makes the gun more intimidating and you feel more like an office commando. The Super Maul can inflict huge amounts of damage when fired from short range, but because the projectile has a tendency to rotate after a while the long range capability of this gun is rather limited. We have tried to use a trailing piece of string for stabilizing the gun. That did not work out. An anonymous fan sent us a clever modification to reduce the wear on the rubber band: Advanced Guns Ruler of the Office ->Main OfficeGunners Guns Advanced Guns Parts Gallery Behind the scenes FAQ Contact Copyright © 2005 converted by