SlideShare a Scribd company logo
1 of 24
Download to read offline
Service Repair Manual
Models
329D2 and 329D2 L Excavator
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 329D2 EXCAVATOR TMJ
Configuration: 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
C7.1 Engines
Media Number -UENR0633-19 Publication Date -01/07/2015 Date Updated -29/10/2018
i05292267
Engine Oil Cooler - Install - Engine Oil Cooler with a Low
Mounted Filter Base
SMCS - 1378-012
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A -
Guide Stud
M8 by 50 mm
2
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Ensure that wiring harness are correctly routed and the cable straps
are not over tightened. Over tightening of the cable straps will damage
the wiring harness convoluting.
1/6
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1 g03408820
1. If necessary, follow Step 1.a through Step 1.d in order to assemble engine oil cooler (5).
a. Ensure that engine oil cooler matrix (10) is clean, free from damage and restriction.
Replace engine oil cooler matrix (10) if damaged or restricted.
b. Ensure that spacer plate (11) is clean and free from damage. Replace spacer plate (11)
if damaged.
c. Position a new gasket (10) onto spacer plate (17). Install engine oil cooler matrix (9)
to the spacer plate.
d. Install bolts (8) finger tight.
2/6
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 2 g03408908
3/6
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 3 g03408917
2. Clean the gasket surfaces of the cylinder block.
3. Install Tooling (A) into Position (B).
4. Position a new gasket (7) (not shown) onto Tooling (A). Ensure that the gasket is correctly
orientated.
5. Install the assembly of engine oil cooler (5) to the cylinder block.
6. Install bolts (6) to engine oil cooler (5) finger tight. Support the engine oil cooler as the
bolts are installed.
Note: Ensure that the bolts of different lengths are installed in the correct position.
7. Remove Tooling (A) and install remaining bolts (6).
4/6
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 4 g03408818
8. If the engine has a low mounted oil filter (1) on the left-hand side, install the oil filter base.
Refer to Disassembly and Assembly, "Oil Filter Base - Remove and Install" for the correct
procedure.
9. If the engine has a right-hand side oil filter, follow Step 9.a through Step 9.d in order to
install blanking plate (2).
a. Install bolts (4) to blanking plate (2).
b. Position a new gasket (3) (not shown) onto blanking plate (2).
c. Install the assembly of blanking plate (2) to the assembly of the engine oil cooler.
d. Tighten bolts (4) to a torque of 22 N·m (195 lb in).
5/6
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 5 g03408914
Tightening sequence for an engine oil cooler with a blanking plate or with a low mounted oil filter base
10. Tighten the bolts to a torque of 22 N·m (195 lb in) in the sequence that is shown in
Illustration 5.
11. Fill the cooling system to the correct level. Refer to Operation and Maintenance Manual,
"Cooling System Coolant - Change" for the correct procedure.
12. Check the level of the engine lubricating oil. Refer to Operation and Maintenance Manual,
"Engine Oil Level - Check" for the correct procedure.
End By:
a. Install the mounting bracket for the Electronic Control Module (ECM) . Refer to
Disassembly and Assembly, "ECM Mounting Bracket- Remove and Install" for the correct
procedure.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 25 18:15:55 UTC+0800 2020
6/6
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 329D2 EXCAVATOR TMJ
Configuration: 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
C7.1 Engines
Media Number -UENR0633-19 Publication Date -01/07/2015 Date Updated -29/10/2018
i05292279
Engine Oil Pump - Remove
SMCS - 1304-011
Removal Procedure
Start By:
a. Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan -
Remove" for the correct procedure.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Dispose of all fluids according to local regulations and mandates.
1/4
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1 g03409484
1. If suction pipe (5) has a support bracket, remove bolt (7) from bracket (8). Remove bolt (6)
for the retaining clip.
2. Remove bracket (8).
Note: Note the position and orientation of the components for the support bracket.
3. Remove bolts (4) from suction pipe (1).
4. Remove suction pipe (5) from oil pump (2).
5. Remove gasket (3) (not shown).
6. Remove bolts (1) and remove the assembly of engine oil pump (2) from the cylinder block.
2/4
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 2 g03409496
7. If necessary, follow Step 7.a through step 7.c to disassemble engine oil pump assembly (2).
a. Remove bolts (11).
b. Remove front cover assembly (12) from engine oil pump assembly (2).
c. Make temporary mark on outer rotor (13) for assembly purposes. Remove the outer
rotor from of engine oil pump (2).
8. Do not remove dowel (9) or dowel (10) from the housing of the engine oil pump unless the
dowels are damaged.
3/4
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 3 g03409497
9. If necessary, follow Step 9.a through step 9.c to remove cross over tube assembly (14).
a. Remove bolts (15) and bolts (16) from cross over tube assembly (14).
b. Remove cross over tube assembly (14) from the cylinder block.
c. Remove gasket (17) and gasket (18).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 25 18:16:51 UTC+0800 2020
4/4
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 329D2 EXCAVATOR TMJ
Configuration: 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
C7.1 Engines
Media Number -UENR0633-19 Publication Date -01/07/2015 Date Updated -29/10/2018
i05292278
Engine Oil Pump - Install
SMCS - 1304-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
7H-1942 Dial Indicator 1
- Magnetic Base and Stand 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
If any part of the engine oil pump is worn or damaged, the complete
assembly of the engine oil pump must be replaced.
1. Ensure that all components of the engine oil pump are clean and free from wear and
damage. Refer to System Operation, Testing and Adjusting, "Engine Oil Pump - Inspect"
1/4
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
for more information. Replace the complete assembly of the engine oil pump if any of the
components are worn or damaged.
Illustration 1 g03409497
2. If necessary, follow Step 2.a through step 2.d to install cross over tube assembly (14).
a. Install new gasket (17) and new gasket (18).
b. Position cross over tube assembly (14) onto the cylinder block.
c. Install bolts (15) and bolts (16) to cross over tube assembly (14) finger tight.
d. Tighten bolts (15) and bolts (16) to a torque of 22 N·m (195 lb in).
2/4
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 2 g03409496
3. If necessary, follow Step 3.a through step 3.d to assemble engine oil pump assembly (2).
a. Lubricate the internal components for the assembly of the engine oil pump with clean
engine oil.
b. Install outer rotor (13) to oil pump assembly (2). Ensure that the outer rotor is
installed in the outer rotor original position and orientation.
c. Install front cover assembly (12) to engine oil pump assembly (2).
d. Install bolts (11) finger tight. Tighten the bolts to a torque of 22 N·m (195 lb in).
4. Ensure that dowel (9) and dowel (10) are correctly located in the housing of engine oil
pump (2).
5. Install bolts (7). Tighten the bolts to a torque of 22 N·m (195 lb in).
6. Install the assembly of engine oil pump (2) to the cylinder block. Ensure that dowel (9) and
dowel (10) are correctly aligned with the holes in the cylinder block.
7. Install bolts (1) to assembly of engine oil pump (2). Tighten the bolts to a torque of 22 N·m
(195 lb in).
8. Use Tooling (A) to check the backlash between idler gear and the crankshaft gear. Refer to
Specifications, "Gear Group (Front)" for more information.
3/4
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. If suction pipe (5) had a support bracket, Follow Step 9.a through Step 9.e in order to install
support bracket and the suction pipe.
a. Install a new gasket (3) (not shown) to suction pipe (5).
b. Install bolts (4) to suction pipe (1).
c. Position the assembly of suction pipe (5) onto oil pump (2). Tighten bolts (4) to a
torque to 22 N·m (195 lb in).
d. Position bracket (8) onto cylinder block and retaining clip. Install bolt (7) to the
bracket. Install bolt (6) to the retaining clip. Hand tighten the bolts.
Note: Ensure the correct location and orientation of the bracket and the retaining clip.
e. Tighten bolt (6) to a torque of 22 N·m (195 lb in).
Tighten bolt (7) to a torque of 44 N·m (32 lb ft).
Note: Ensure that the suction pipe and the bracket are not strained as the bolts are
tightened.
End By:
a. Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Install"
for the correct procedure.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 25 18:17:47 UTC+0800 2020
4/4
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 329D2 EXCAVATOR TMJ
Configuration: 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
C7.1 Engines
Media Number -UENR0633-19 Publication Date -01/07/2015 Date Updated -29/10/2018
i05292437
Water Pump - Remove
SMCS - 1361-011
Removal Procedure
Start By:
a. Remove the fan and the fan pulley. Refer to Disassembly and Assembly, "Fan - Remove
and Install" for the correct procedure.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Dispose of all fluids according to local regulations and mandates.
1/2
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
1. Drain the coolant from the cooling system into a suitable container for storage or disposal.
Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the
correct procedure.
2. Loosen the hose clamps and remove the hose from the water pump inlet.
Illustration 1 g03434676
3. Remove bolts (4), bolts (5), and bolts (6). Identify the positions of bolts of different length.
4. Remove water pump (3) from front cover (1).
Note: If necessary, tap the water pump with a soft faced hammer in order to loosen the
water pump.
5. Remove gasket (2).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 25 18:18:42 UTC+0800 2020
2/2
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 329D2 EXCAVATOR TMJ
Configuration: 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
C7.1 Engines
Media Number -UENR0633-19 Publication Date -01/07/2015 Date Updated -29/10/2018
i05292436
Water Pump - Install
SMCS - 1361-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A -
Guide Studs
M8 by 90 mm
2
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Dispose of all fluids according to local regulations and mandates.
1/4
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
1. Ensure that the water pump is clean and free from wear and damage. If necessary, replace
the water pump. Clean the gasket surface of the water pump.
Illustration 1 g03434736
2/4
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 2 g03413498
2. Clean the gasket surface of front cover (1).
3. Install Tooling (A) in Position (X).
4. Use Tooling (A) in order to align new gasket (2) to front cover (1). Install the gasket onto
the front cover.
5. Align water pump (3) to Tooling (A). Install the water pump to front cover (1).
Note: Ensure that the gear of the water pump and the gear of the fuel injection pump mesh.
6. Install bolts (4), bolts (5), and bolts (6). Refer to Illustration 1. Tighten the bolts finger tight.
7. Remove Tooling (A) and install the remaining bolts.
3/4
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 3 g03413499
8. Tighten bolts (4), bolts (5), and bolts (6) in the sequence that is shown in Illustration 3 to a
torque of 22 N·m (195 lb in).
9. Install the hose to the water pump inlet. Tighten the hose clamps securely.
10. Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling
System Coolant - Change" for the correct procedure.
End By:
a. Install the fan and the fan pulley. Refer to Disassembly and Assembly, "Fan - Remove and
Install" for the correct procedure.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 25 18:19:38 UTC+0800 2020
4/4
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 329D2 EXCAVATOR TMJ
Configuration: 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
C7.1 Engines
Media Number -UENR0633-19 Publication Date -01/07/2015 Date Updated -29/10/2018
i05292439
Water Temperature Regulator - Remove and Install
SMCS - 1355-010
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Dispose of all fluids according to local regulations and mandates.
1. Drain the coolant from the cooling system to a level below the water temperature regulator,
into a suitable container for storage or for disposal. Refer to Operation and Maintenance
Manual, "Cooling System Coolant - Change" for the correct draining procedure.
2. Loosen the hose clamps from the upper radiator hose and disconnect the upper radiator hose
from water temperature regulator housing (2).
1/4
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
Illustration 1 g01336665
Typical example
3. Remove bolts (1) from water temperature regulator housing (2).
4. Remove water temperature regulator housing (2) from the cylinder head.
Note: Note the orientation of the water temperature regulator housing.
Illustration 2 g01336667
Typical example
5. Remove O-ring seal (3) from water temperature regulator housing (2).
Installation Procedure
2/4
329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

More Related Content

More from qianxu35543635

John Deere 5500N Tractor Service Repair Manual Instant Download (tm4598).pdf
John Deere 5500N Tractor Service Repair Manual Instant Download (tm4598).pdfJohn Deere 5500N Tractor Service Repair Manual Instant Download (tm4598).pdf
John Deere 5500N Tractor Service Repair Manual Instant Download (tm4598).pdfqianxu35543635
 
John Deere 5400N Tractor Service Repair Manual Instant Download (tm4598).pdf
John Deere 5400N Tractor Service Repair Manual Instant Download (tm4598).pdfJohn Deere 5400N Tractor Service Repair Manual Instant Download (tm4598).pdf
John Deere 5400N Tractor Service Repair Manual Instant Download (tm4598).pdfqianxu35543635
 
John Deere 5300N Tractor Service Repair Manual Instant Download (tm4598).pdf
John Deere 5300N Tractor Service Repair Manual Instant Download (tm4598).pdfJohn Deere 5300N Tractor Service Repair Manual Instant Download (tm4598).pdf
John Deere 5300N Tractor Service Repair Manual Instant Download (tm4598).pdfqianxu35543635
 
JOHN DEERE 430 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...
JOHN DEERE 430 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...JOHN DEERE 430 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...
JOHN DEERE 430 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...qianxu35543635
 
JOHN DEERE 332 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...
JOHN DEERE 332 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...JOHN DEERE 332 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...
JOHN DEERE 332 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...qianxu35543635
 
JOHN DEERE 330 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...
JOHN DEERE 330 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...JOHN DEERE 330 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...
JOHN DEERE 330 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...qianxu35543635
 
JOHN DEERE 322 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...
JOHN DEERE 322 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...JOHN DEERE 322 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...
JOHN DEERE 322 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...qianxu35543635
 
John Deere 261 and 272 Rear-Mounted Mowers Service Repair Manual Instant Down...
John Deere 261 and 272 Rear-Mounted Mowers Service Repair Manual Instant Down...John Deere 261 and 272 Rear-Mounted Mowers Service Repair Manual Instant Down...
John Deere 261 and 272 Rear-Mounted Mowers Service Repair Manual Instant Down...qianxu35543635
 
John Deere 74 and 84 Blades Service Repair Manual Instant Download.pdf
John Deere 74 and 84 Blades Service Repair Manual Instant Download.pdfJohn Deere 74 and 84 Blades Service Repair Manual Instant Download.pdf
John Deere 74 and 84 Blades Service Repair Manual Instant Download.pdfqianxu35543635
 
John Deere 54D, 60D, 62D AND 72D OnRamp Mowers Service Repair Manual Instant ...
John Deere 54D, 60D, 62D AND 72D OnRamp Mowers Service Repair Manual Instant ...John Deere 54D, 60D, 62D AND 72D OnRamp Mowers Service Repair Manual Instant ...
John Deere 54D, 60D, 62D AND 72D OnRamp Mowers Service Repair Manual Instant ...qianxu35543635
 
John Deere 54D, 60D and 72 Service Repair Manual Instant Download.pdf
John Deere 54D, 60D and 72 Service Repair Manual Instant Download.pdfJohn Deere 54D, 60D and 72 Service Repair Manual Instant Download.pdf
John Deere 54D, 60D and 72 Service Repair Manual Instant Download.pdfqianxu35543635
 
John Deere 54, 60 and 72-Inch Mid Mount Mowers Service Repair Manual Instant ...
John Deere 54, 60 and 72-Inch Mid Mount Mowers Service Repair Manual Instant ...John Deere 54, 60 and 72-Inch Mid Mount Mowers Service Repair Manual Instant ...
John Deere 54, 60 and 72-Inch Mid Mount Mowers Service Repair Manual Instant ...qianxu35543635
 
John Deere 47 and 59 Snowbowers Service Repair Manual Instant Download.pdf
John Deere 47 and 59 Snowbowers Service Repair Manual Instant Download.pdfJohn Deere 47 and 59 Snowbowers Service Repair Manual Instant Download.pdf
John Deere 47 and 59 Snowbowers Service Repair Manual Instant Download.pdfqianxu35543635
 
John Deere 31B Post Hole Digger Service Repair Manual Instant Download.pdf
John Deere 31B Post Hole Digger Service Repair Manual Instant Download.pdfJohn Deere 31B Post Hole Digger Service Repair Manual Instant Download.pdf
John Deere 31B Post Hole Digger Service Repair Manual Instant Download.pdfqianxu35543635
 
John Deere 26 and 51-Inch Brooms Service Repair Manual Instant Download.pdf
John Deere 26 and 51-Inch Brooms Service Repair Manual Instant Download.pdfJohn Deere 26 and 51-Inch Brooms Service Repair Manual Instant Download.pdf
John Deere 26 and 51-Inch Brooms Service Repair Manual Instant Download.pdfqianxu35543635
 
John Deere 5E 2BV Blower Service Repair Manual Instant Download (TM1430).pdf
John Deere 5E  2BV Blower Service Repair Manual Instant Download (TM1430).pdfJohn Deere 5E  2BV Blower Service Repair Manual Instant Download (TM1430).pdf
John Deere 5E 2BV Blower Service Repair Manual Instant Download (TM1430).pdfqianxu35543635
 
Caterpillar Cat D11N TRACK-TYPE TRACTOR (Prefix 4HK) Service Repair Manual In...
Caterpillar Cat D11N TRACK-TYPE TRACTOR (Prefix 4HK) Service Repair Manual In...Caterpillar Cat D11N TRACK-TYPE TRACTOR (Prefix 4HK) Service Repair Manual In...
Caterpillar Cat D11N TRACK-TYPE TRACTOR (Prefix 4HK) Service Repair Manual In...qianxu35543635
 
Caterpillar Cat D8L TRACK-TYPE TRACTOR Dozer Bulldozer (Prefix 4FB) Service R...
Caterpillar Cat D8L TRACK-TYPE TRACTOR Dozer Bulldozer (Prefix 4FB) Service R...Caterpillar Cat D8L TRACK-TYPE TRACTOR Dozer Bulldozer (Prefix 4FB) Service R...
Caterpillar Cat D8L TRACK-TYPE TRACTOR Dozer Bulldozer (Prefix 4FB) Service R...qianxu35543635
 
Caterpillar Cat D6R TRACK TRACTOR (Prefix 7GR) Service Repair Manual Instant ...
Caterpillar Cat D6R TRACK TRACTOR (Prefix 7GR) Service Repair Manual Instant ...Caterpillar Cat D6R TRACK TRACTOR (Prefix 7GR) Service Repair Manual Instant ...
Caterpillar Cat D6R TRACK TRACTOR (Prefix 7GR) Service Repair Manual Instant ...qianxu35543635
 
Caterpillar Cat D4HTSK III TRACK SKIDDER (Prefix 7PK) Service Repair Manual I...
Caterpillar Cat D4HTSK III TRACK SKIDDER (Prefix 7PK) Service Repair Manual I...Caterpillar Cat D4HTSK III TRACK SKIDDER (Prefix 7PK) Service Repair Manual I...
Caterpillar Cat D4HTSK III TRACK SKIDDER (Prefix 7PK) Service Repair Manual I...qianxu35543635
 

More from qianxu35543635 (20)

John Deere 5500N Tractor Service Repair Manual Instant Download (tm4598).pdf
John Deere 5500N Tractor Service Repair Manual Instant Download (tm4598).pdfJohn Deere 5500N Tractor Service Repair Manual Instant Download (tm4598).pdf
John Deere 5500N Tractor Service Repair Manual Instant Download (tm4598).pdf
 
John Deere 5400N Tractor Service Repair Manual Instant Download (tm4598).pdf
John Deere 5400N Tractor Service Repair Manual Instant Download (tm4598).pdfJohn Deere 5400N Tractor Service Repair Manual Instant Download (tm4598).pdf
John Deere 5400N Tractor Service Repair Manual Instant Download (tm4598).pdf
 
John Deere 5300N Tractor Service Repair Manual Instant Download (tm4598).pdf
John Deere 5300N Tractor Service Repair Manual Instant Download (tm4598).pdfJohn Deere 5300N Tractor Service Repair Manual Instant Download (tm4598).pdf
John Deere 5300N Tractor Service Repair Manual Instant Download (tm4598).pdf
 
JOHN DEERE 430 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...
JOHN DEERE 430 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...JOHN DEERE 430 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...
JOHN DEERE 430 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...
 
JOHN DEERE 332 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...
JOHN DEERE 332 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...JOHN DEERE 332 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...
JOHN DEERE 332 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...
 
JOHN DEERE 330 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...
JOHN DEERE 330 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...JOHN DEERE 330 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...
JOHN DEERE 330 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...
 
JOHN DEERE 322 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...
JOHN DEERE 322 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...JOHN DEERE 322 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...
JOHN DEERE 322 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...
 
John Deere 261 and 272 Rear-Mounted Mowers Service Repair Manual Instant Down...
John Deere 261 and 272 Rear-Mounted Mowers Service Repair Manual Instant Down...John Deere 261 and 272 Rear-Mounted Mowers Service Repair Manual Instant Down...
John Deere 261 and 272 Rear-Mounted Mowers Service Repair Manual Instant Down...
 
John Deere 74 and 84 Blades Service Repair Manual Instant Download.pdf
John Deere 74 and 84 Blades Service Repair Manual Instant Download.pdfJohn Deere 74 and 84 Blades Service Repair Manual Instant Download.pdf
John Deere 74 and 84 Blades Service Repair Manual Instant Download.pdf
 
John Deere 54D, 60D, 62D AND 72D OnRamp Mowers Service Repair Manual Instant ...
John Deere 54D, 60D, 62D AND 72D OnRamp Mowers Service Repair Manual Instant ...John Deere 54D, 60D, 62D AND 72D OnRamp Mowers Service Repair Manual Instant ...
John Deere 54D, 60D, 62D AND 72D OnRamp Mowers Service Repair Manual Instant ...
 
John Deere 54D, 60D and 72 Service Repair Manual Instant Download.pdf
John Deere 54D, 60D and 72 Service Repair Manual Instant Download.pdfJohn Deere 54D, 60D and 72 Service Repair Manual Instant Download.pdf
John Deere 54D, 60D and 72 Service Repair Manual Instant Download.pdf
 
John Deere 54, 60 and 72-Inch Mid Mount Mowers Service Repair Manual Instant ...
John Deere 54, 60 and 72-Inch Mid Mount Mowers Service Repair Manual Instant ...John Deere 54, 60 and 72-Inch Mid Mount Mowers Service Repair Manual Instant ...
John Deere 54, 60 and 72-Inch Mid Mount Mowers Service Repair Manual Instant ...
 
John Deere 47 and 59 Snowbowers Service Repair Manual Instant Download.pdf
John Deere 47 and 59 Snowbowers Service Repair Manual Instant Download.pdfJohn Deere 47 and 59 Snowbowers Service Repair Manual Instant Download.pdf
John Deere 47 and 59 Snowbowers Service Repair Manual Instant Download.pdf
 
John Deere 31B Post Hole Digger Service Repair Manual Instant Download.pdf
John Deere 31B Post Hole Digger Service Repair Manual Instant Download.pdfJohn Deere 31B Post Hole Digger Service Repair Manual Instant Download.pdf
John Deere 31B Post Hole Digger Service Repair Manual Instant Download.pdf
 
John Deere 26 and 51-Inch Brooms Service Repair Manual Instant Download.pdf
John Deere 26 and 51-Inch Brooms Service Repair Manual Instant Download.pdfJohn Deere 26 and 51-Inch Brooms Service Repair Manual Instant Download.pdf
John Deere 26 and 51-Inch Brooms Service Repair Manual Instant Download.pdf
 
John Deere 5E 2BV Blower Service Repair Manual Instant Download (TM1430).pdf
John Deere 5E  2BV Blower Service Repair Manual Instant Download (TM1430).pdfJohn Deere 5E  2BV Blower Service Repair Manual Instant Download (TM1430).pdf
John Deere 5E 2BV Blower Service Repair Manual Instant Download (TM1430).pdf
 
Caterpillar Cat D11N TRACK-TYPE TRACTOR (Prefix 4HK) Service Repair Manual In...
Caterpillar Cat D11N TRACK-TYPE TRACTOR (Prefix 4HK) Service Repair Manual In...Caterpillar Cat D11N TRACK-TYPE TRACTOR (Prefix 4HK) Service Repair Manual In...
Caterpillar Cat D11N TRACK-TYPE TRACTOR (Prefix 4HK) Service Repair Manual In...
 
Caterpillar Cat D8L TRACK-TYPE TRACTOR Dozer Bulldozer (Prefix 4FB) Service R...
Caterpillar Cat D8L TRACK-TYPE TRACTOR Dozer Bulldozer (Prefix 4FB) Service R...Caterpillar Cat D8L TRACK-TYPE TRACTOR Dozer Bulldozer (Prefix 4FB) Service R...
Caterpillar Cat D8L TRACK-TYPE TRACTOR Dozer Bulldozer (Prefix 4FB) Service R...
 
Caterpillar Cat D6R TRACK TRACTOR (Prefix 7GR) Service Repair Manual Instant ...
Caterpillar Cat D6R TRACK TRACTOR (Prefix 7GR) Service Repair Manual Instant ...Caterpillar Cat D6R TRACK TRACTOR (Prefix 7GR) Service Repair Manual Instant ...
Caterpillar Cat D6R TRACK TRACTOR (Prefix 7GR) Service Repair Manual Instant ...
 
Caterpillar Cat D4HTSK III TRACK SKIDDER (Prefix 7PK) Service Repair Manual I...
Caterpillar Cat D4HTSK III TRACK SKIDDER (Prefix 7PK) Service Repair Manual I...Caterpillar Cat D4HTSK III TRACK SKIDDER (Prefix 7PK) Service Repair Manual I...
Caterpillar Cat D4HTSK III TRACK SKIDDER (Prefix 7PK) Service Repair Manual I...
 

Recently uploaded

Can't Roll Up Your Audi A4 Power Window Let's Uncover the Issue!
Can't Roll Up Your Audi A4 Power Window Let's Uncover the Issue!Can't Roll Up Your Audi A4 Power Window Let's Uncover the Issue!
Can't Roll Up Your Audi A4 Power Window Let's Uncover the Issue!Mint Automotive
 
A Comprehensive Exploration of the Components and Parts Found in Diesel Engines
A Comprehensive Exploration of the Components and Parts Found in Diesel EnginesA Comprehensive Exploration of the Components and Parts Found in Diesel Engines
A Comprehensive Exploration of the Components and Parts Found in Diesel EnginesROJANE BERNAS, PhD.
 
Pros and cons of buying used fleet vehicles.pptx
Pros and cons of buying used fleet vehicles.pptxPros and cons of buying used fleet vehicles.pptx
Pros and cons of buying used fleet vehicles.pptxjennifermiller8137
 
ABOUT REGENERATIVE BRAKING SYSTEM ON AUTOMOBILES
ABOUT REGENERATIVE BRAKING SYSTEM ON AUTOMOBILESABOUT REGENERATIVE BRAKING SYSTEM ON AUTOMOBILES
ABOUT REGENERATIVE BRAKING SYSTEM ON AUTOMOBILESsriharshaganjam1
 
Control-Plan-Training.pptx for the Automotive standard AIAG
Control-Plan-Training.pptx for the Automotive standard AIAGControl-Plan-Training.pptx for the Automotive standard AIAG
Control-Plan-Training.pptx for the Automotive standard AIAGVikrantPawar37
 
Human Resource Practices TATA MOTORS.pdf
Human Resource Practices TATA MOTORS.pdfHuman Resource Practices TATA MOTORS.pdf
Human Resource Practices TATA MOTORS.pdfAditiMishra247289
 
怎么办理美国UCONN毕业证康涅狄格大学学位证书一手渠道
怎么办理美国UCONN毕业证康涅狄格大学学位证书一手渠道怎么办理美国UCONN毕业证康涅狄格大学学位证书一手渠道
怎么办理美国UCONN毕业证康涅狄格大学学位证书一手渠道7283h7lh
 
Mastering Mercedes Engine Care Top Tips for Rowlett, TX Residents
Mastering Mercedes Engine Care Top Tips for Rowlett, TX ResidentsMastering Mercedes Engine Care Top Tips for Rowlett, TX Residents
Mastering Mercedes Engine Care Top Tips for Rowlett, TX ResidentsRowlett Motorwerks
 
Lighting the Way Understanding Jaguar Car Check Engine Light Service
Lighting the Way Understanding Jaguar Car Check Engine Light ServiceLighting the Way Understanding Jaguar Car Check Engine Light Service
Lighting the Way Understanding Jaguar Car Check Engine Light ServiceImport Car Center
 
Welcome to Auto Know University Orientation
Welcome to Auto Know University OrientationWelcome to Auto Know University Orientation
Welcome to Auto Know University Orientationxlr8sales
 

Recently uploaded (10)

Can't Roll Up Your Audi A4 Power Window Let's Uncover the Issue!
Can't Roll Up Your Audi A4 Power Window Let's Uncover the Issue!Can't Roll Up Your Audi A4 Power Window Let's Uncover the Issue!
Can't Roll Up Your Audi A4 Power Window Let's Uncover the Issue!
 
A Comprehensive Exploration of the Components and Parts Found in Diesel Engines
A Comprehensive Exploration of the Components and Parts Found in Diesel EnginesA Comprehensive Exploration of the Components and Parts Found in Diesel Engines
A Comprehensive Exploration of the Components and Parts Found in Diesel Engines
 
Pros and cons of buying used fleet vehicles.pptx
Pros and cons of buying used fleet vehicles.pptxPros and cons of buying used fleet vehicles.pptx
Pros and cons of buying used fleet vehicles.pptx
 
ABOUT REGENERATIVE BRAKING SYSTEM ON AUTOMOBILES
ABOUT REGENERATIVE BRAKING SYSTEM ON AUTOMOBILESABOUT REGENERATIVE BRAKING SYSTEM ON AUTOMOBILES
ABOUT REGENERATIVE BRAKING SYSTEM ON AUTOMOBILES
 
Control-Plan-Training.pptx for the Automotive standard AIAG
Control-Plan-Training.pptx for the Automotive standard AIAGControl-Plan-Training.pptx for the Automotive standard AIAG
Control-Plan-Training.pptx for the Automotive standard AIAG
 
Human Resource Practices TATA MOTORS.pdf
Human Resource Practices TATA MOTORS.pdfHuman Resource Practices TATA MOTORS.pdf
Human Resource Practices TATA MOTORS.pdf
 
怎么办理美国UCONN毕业证康涅狄格大学学位证书一手渠道
怎么办理美国UCONN毕业证康涅狄格大学学位证书一手渠道怎么办理美国UCONN毕业证康涅狄格大学学位证书一手渠道
怎么办理美国UCONN毕业证康涅狄格大学学位证书一手渠道
 
Mastering Mercedes Engine Care Top Tips for Rowlett, TX Residents
Mastering Mercedes Engine Care Top Tips for Rowlett, TX ResidentsMastering Mercedes Engine Care Top Tips for Rowlett, TX Residents
Mastering Mercedes Engine Care Top Tips for Rowlett, TX Residents
 
Lighting the Way Understanding Jaguar Car Check Engine Light Service
Lighting the Way Understanding Jaguar Car Check Engine Light ServiceLighting the Way Understanding Jaguar Car Check Engine Light Service
Lighting the Way Understanding Jaguar Car Check Engine Light Service
 
Welcome to Auto Know University Orientation
Welcome to Auto Know University OrientationWelcome to Auto Know University Orientation
Welcome to Auto Know University Orientation
 

Caterpillar Cat 329D2 L Excavator (Prefix TMJ) Service Repair Manual Instant Download.pdf

  • 1. Service Repair Manual Models 329D2 and 329D2 L Excavator
  • 2. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 329D2 EXCAVATOR TMJ Configuration: 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Engine Disassembly and Assembly C7.1 Engines Media Number -UENR0633-19 Publication Date -01/07/2015 Date Updated -29/10/2018 i05292267 Engine Oil Cooler - Install - Engine Oil Cooler with a Low Mounted Filter Base SMCS - 1378-012 Assembly Procedure Table 1 Required Tools Tool Part Number Part Description Qty A - Guide Stud M8 by 50 mm 2 NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. NOTICE Ensure that wiring harness are correctly routed and the cable straps are not over tightened. Over tightening of the cable straps will damage the wiring harness convoluting. 1/6 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 3. Illustration 1 g03408820 1. If necessary, follow Step 1.a through Step 1.d in order to assemble engine oil cooler (5). a. Ensure that engine oil cooler matrix (10) is clean, free from damage and restriction. Replace engine oil cooler matrix (10) if damaged or restricted. b. Ensure that spacer plate (11) is clean and free from damage. Replace spacer plate (11) if damaged. c. Position a new gasket (10) onto spacer plate (17). Install engine oil cooler matrix (9) to the spacer plate. d. Install bolts (8) finger tight. 2/6 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 4. Illustration 2 g03408908 3/6 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 5. Illustration 3 g03408917 2. Clean the gasket surfaces of the cylinder block. 3. Install Tooling (A) into Position (B). 4. Position a new gasket (7) (not shown) onto Tooling (A). Ensure that the gasket is correctly orientated. 5. Install the assembly of engine oil cooler (5) to the cylinder block. 6. Install bolts (6) to engine oil cooler (5) finger tight. Support the engine oil cooler as the bolts are installed. Note: Ensure that the bolts of different lengths are installed in the correct position. 7. Remove Tooling (A) and install remaining bolts (6). 4/6 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 6. Illustration 4 g03408818 8. If the engine has a low mounted oil filter (1) on the left-hand side, install the oil filter base. Refer to Disassembly and Assembly, "Oil Filter Base - Remove and Install" for the correct procedure. 9. If the engine has a right-hand side oil filter, follow Step 9.a through Step 9.d in order to install blanking plate (2). a. Install bolts (4) to blanking plate (2). b. Position a new gasket (3) (not shown) onto blanking plate (2). c. Install the assembly of blanking plate (2) to the assembly of the engine oil cooler. d. Tighten bolts (4) to a torque of 22 N·m (195 lb in). 5/6 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 7. Illustration 5 g03408914 Tightening sequence for an engine oil cooler with a blanking plate or with a low mounted oil filter base 10. Tighten the bolts to a torque of 22 N·m (195 lb in) in the sequence that is shown in Illustration 5. 11. Fill the cooling system to the correct level. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure. 12. Check the level of the engine lubricating oil. Refer to Operation and Maintenance Manual, "Engine Oil Level - Check" for the correct procedure. End By: a. Install the mounting bracket for the Electronic Control Module (ECM) . Refer to Disassembly and Assembly, "ECM Mounting Bracket- Remove and Install" for the correct procedure. Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Sat Apr 25 18:15:55 UTC+0800 2020 6/6 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 8. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 329D2 EXCAVATOR TMJ Configuration: 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Engine Disassembly and Assembly C7.1 Engines Media Number -UENR0633-19 Publication Date -01/07/2015 Date Updated -29/10/2018 i05292279 Engine Oil Pump - Remove SMCS - 1304-011 Removal Procedure Start By: a. Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove" for the correct procedure. NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Dispose of all fluids according to local regulations and mandates. 1/4 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 9. Illustration 1 g03409484 1. If suction pipe (5) has a support bracket, remove bolt (7) from bracket (8). Remove bolt (6) for the retaining clip. 2. Remove bracket (8). Note: Note the position and orientation of the components for the support bracket. 3. Remove bolts (4) from suction pipe (1). 4. Remove suction pipe (5) from oil pump (2). 5. Remove gasket (3) (not shown). 6. Remove bolts (1) and remove the assembly of engine oil pump (2) from the cylinder block. 2/4 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 10. Illustration 2 g03409496 7. If necessary, follow Step 7.a through step 7.c to disassemble engine oil pump assembly (2). a. Remove bolts (11). b. Remove front cover assembly (12) from engine oil pump assembly (2). c. Make temporary mark on outer rotor (13) for assembly purposes. Remove the outer rotor from of engine oil pump (2). 8. Do not remove dowel (9) or dowel (10) from the housing of the engine oil pump unless the dowels are damaged. 3/4 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 11. Illustration 3 g03409497 9. If necessary, follow Step 9.a through step 9.c to remove cross over tube assembly (14). a. Remove bolts (15) and bolts (16) from cross over tube assembly (14). b. Remove cross over tube assembly (14) from the cylinder block. c. Remove gasket (17) and gasket (18). Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Sat Apr 25 18:16:51 UTC+0800 2020 4/4 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 12. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 329D2 EXCAVATOR TMJ Configuration: 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Engine Disassembly and Assembly C7.1 Engines Media Number -UENR0633-19 Publication Date -01/07/2015 Date Updated -29/10/2018 i05292278 Engine Oil Pump - Install SMCS - 1304-012 Installation Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 7H-1942 Dial Indicator 1 - Magnetic Base and Stand 1 NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. NOTICE If any part of the engine oil pump is worn or damaged, the complete assembly of the engine oil pump must be replaced. 1. Ensure that all components of the engine oil pump are clean and free from wear and damage. Refer to System Operation, Testing and Adjusting, "Engine Oil Pump - Inspect" 1/4 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 13. for more information. Replace the complete assembly of the engine oil pump if any of the components are worn or damaged. Illustration 1 g03409497 2. If necessary, follow Step 2.a through step 2.d to install cross over tube assembly (14). a. Install new gasket (17) and new gasket (18). b. Position cross over tube assembly (14) onto the cylinder block. c. Install bolts (15) and bolts (16) to cross over tube assembly (14) finger tight. d. Tighten bolts (15) and bolts (16) to a torque of 22 N·m (195 lb in). 2/4 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 14. Illustration 2 g03409496 3. If necessary, follow Step 3.a through step 3.d to assemble engine oil pump assembly (2). a. Lubricate the internal components for the assembly of the engine oil pump with clean engine oil. b. Install outer rotor (13) to oil pump assembly (2). Ensure that the outer rotor is installed in the outer rotor original position and orientation. c. Install front cover assembly (12) to engine oil pump assembly (2). d. Install bolts (11) finger tight. Tighten the bolts to a torque of 22 N·m (195 lb in). 4. Ensure that dowel (9) and dowel (10) are correctly located in the housing of engine oil pump (2). 5. Install bolts (7). Tighten the bolts to a torque of 22 N·m (195 lb in). 6. Install the assembly of engine oil pump (2) to the cylinder block. Ensure that dowel (9) and dowel (10) are correctly aligned with the holes in the cylinder block. 7. Install bolts (1) to assembly of engine oil pump (2). Tighten the bolts to a torque of 22 N·m (195 lb in). 8. Use Tooling (A) to check the backlash between idler gear and the crankshaft gear. Refer to Specifications, "Gear Group (Front)" for more information. 3/4 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 15. 9. If suction pipe (5) had a support bracket, Follow Step 9.a through Step 9.e in order to install support bracket and the suction pipe. a. Install a new gasket (3) (not shown) to suction pipe (5). b. Install bolts (4) to suction pipe (1). c. Position the assembly of suction pipe (5) onto oil pump (2). Tighten bolts (4) to a torque to 22 N·m (195 lb in). d. Position bracket (8) onto cylinder block and retaining clip. Install bolt (7) to the bracket. Install bolt (6) to the retaining clip. Hand tighten the bolts. Note: Ensure the correct location and orientation of the bracket and the retaining clip. e. Tighten bolt (6) to a torque of 22 N·m (195 lb in). Tighten bolt (7) to a torque of 44 N·m (32 lb ft). Note: Ensure that the suction pipe and the bracket are not strained as the bolts are tightened. End By: a. Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Install" for the correct procedure. Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Sat Apr 25 18:17:47 UTC+0800 2020 4/4 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 16. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 329D2 EXCAVATOR TMJ Configuration: 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Engine Disassembly and Assembly C7.1 Engines Media Number -UENR0633-19 Publication Date -01/07/2015 Date Updated -29/10/2018 i05292437 Water Pump - Remove SMCS - 1361-011 Removal Procedure Start By: a. Remove the fan and the fan pulley. Refer to Disassembly and Assembly, "Fan - Remove and Install" for the correct procedure. NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Dispose of all fluids according to local regulations and mandates. 1/2 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 17. 1. Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure. 2. Loosen the hose clamps and remove the hose from the water pump inlet. Illustration 1 g03434676 3. Remove bolts (4), bolts (5), and bolts (6). Identify the positions of bolts of different length. 4. Remove water pump (3) from front cover (1). Note: If necessary, tap the water pump with a soft faced hammer in order to loosen the water pump. 5. Remove gasket (2). Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Sat Apr 25 18:18:42 UTC+0800 2020 2/2 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 18. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 329D2 EXCAVATOR TMJ Configuration: 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Engine Disassembly and Assembly C7.1 Engines Media Number -UENR0633-19 Publication Date -01/07/2015 Date Updated -29/10/2018 i05292436 Water Pump - Install SMCS - 1361-012 Installation Procedure Table 1 Required Tools Tool Part Number Part Description Qty A - Guide Studs M8 by 90 mm 2 NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Dispose of all fluids according to local regulations and mandates. 1/4 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 19. 1. Ensure that the water pump is clean and free from wear and damage. If necessary, replace the water pump. Clean the gasket surface of the water pump. Illustration 1 g03434736 2/4 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 20. Illustration 2 g03413498 2. Clean the gasket surface of front cover (1). 3. Install Tooling (A) in Position (X). 4. Use Tooling (A) in order to align new gasket (2) to front cover (1). Install the gasket onto the front cover. 5. Align water pump (3) to Tooling (A). Install the water pump to front cover (1). Note: Ensure that the gear of the water pump and the gear of the fuel injection pump mesh. 6. Install bolts (4), bolts (5), and bolts (6). Refer to Illustration 1. Tighten the bolts finger tight. 7. Remove Tooling (A) and install the remaining bolts. 3/4 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 21. Illustration 3 g03413499 8. Tighten bolts (4), bolts (5), and bolts (6) in the sequence that is shown in Illustration 3 to a torque of 22 N·m (195 lb in). 9. Install the hose to the water pump inlet. Tighten the hose clamps securely. 10. Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure. End By: a. Install the fan and the fan pulley. Refer to Disassembly and Assembly, "Fan - Remove and Install" for the correct procedure. Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Sat Apr 25 18:19:38 UTC+0800 2020 4/4 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 22. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 329D2 EXCAVATOR TMJ Configuration: 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Engine Disassembly and Assembly C7.1 Engines Media Number -UENR0633-19 Publication Date -01/07/2015 Date Updated -29/10/2018 i05292439 Water Temperature Regulator - Remove and Install SMCS - 1355-010 Removal Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Dispose of all fluids according to local regulations and mandates. 1. Drain the coolant from the cooling system to a level below the water temperature regulator, into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct draining procedure. 2. Loosen the hose clamps from the upper radiator hose and disconnect the upper radiator hose from water temperature regulator housing (2). 1/4 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 23. Suggest: If the above button click is invalid. Please download this document first, and then click the above link to download the complete manual. Thank you so much for reading
  • 24. Illustration 1 g01336665 Typical example 3. Remove bolts (1) from water temperature regulator housing (2). 4. Remove water temperature regulator housing (2) from the cylinder head. Note: Note the orientation of the water temperature regulator housing. Illustration 2 g01336667 Typical example 5. Remove O-ring seal (3) from water temperature regulator housing (2). Installation Procedure 2/4 329D2 & 329D2 L Excavators TMJ00001-UP (MACHINE) POWERED BY C7.1 Eng... 2020/4/25 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...