Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

VAPORIZZATORE ROOR - VAPOR - ISTRUZIONI D'USO >> By PuntoG

PUNTOG - HEAD SHOP - VAPE SHOP - HEMP SHOP - GROW SHOP
VENDITA E ASSISTENZA ON LINE SU VAPORIZZATORI
www.puntog-shop.com
Mobile +39 345 889 3933
Email : info@puntog-shop.com

ORDINI TELEFONICI PER VAPORIZZATORI
Spediamo la merce in tutta Italia con Consegna in pacco assolutamente robusto. Riceverai la merce entro tre giorni lavorativi dall’ordine. Chiama Ora!

  • Login to see the comments

  • Be the first to like this

VAPORIZZATORE ROOR - VAPOR - ISTRUZIONI D'USO >> By PuntoG

  1. 1. Instructions for use Wheneverhandlingparts,pleaseexercisecautionandensurethatyourROORVaporissetupinasuitablelocation. The conical glass connections are joined with an accurate fit. To dismantle, first loosen these connections by turning before separating the parts. Fill the ROOR Vapor body with a little water (until just above the holes) . The water filters all solids out of the vapour while also cooling it. Place head with stainless steel screen on body. Put the leaves, finely ground with a mill, into the head until the screen is fully covered. Now place the heating element on the filled head. Connect the heating element to the power adapter and power plug with the socket. Assembly Scope of supply for electronics - ROOR VAPOR basic (constant) Scope of supply for electronics - ROOR VAPOR XL (controllable) Scope of supply for glass Switching power adapter Temperature adjustment controller Scope of supply for electronics (US) (EU)Power plugHeating element/injector Power adapter Bowl with stainless steel screen ROOR Vapor pokerROOR Vapor cooling stand ROOR Vapor body ROOR Vapor mouthpiece
  2. 2. To learn more visit www.roor.de/vapor or contact vapor@roor.de (US) (EU) User instructions Caution: To avoid damaging the heating element, NEVER BLOW into the ROOR Vapor. As soon as a sufficient temperature is reached, the ROOR Vapor can be left on for several hours and used without preheating. 2) TIPP! You should inhale slowly and continuously for optimum efficiency 3) After inhaling several times, remove the heating element and place on the stand. (Take care, it will be very hot) Avoid other materials as these could be highly flammable or heat-sensitive. Alternatively, the heating element itself may be damaged. Then use the glass rod to stir the leaves to ensure complete vaporisation. 4)Thevaporisationprocessiscompletewhenthegreenoftheleavesturnsyelloworthetastebecomes unpleasant. 5) To replace the leaves, follow the instructions under point 3. 6) Empty the bowl after every session. This is easier to do when it is still warm. The screen is very easy to remove along with the glass rod. To prevent blockages, clean the bowl regularly with a small brush. Thanks for purchasing the ROOR Vapor. We hope you enjoy using our product. Allow 10 minutes for warming up before use. 1) Set the temperature adjustment controller to therequiredtemperature.Theoptimumtemperature for resinous leaves is about 190°C/375°F on the regulation display. Abstufungen/Temperaturen(*onlyXL-Version) 1-90°C/194°F 2-110°C/230°F 3-130°C/266°F 4-150°C/300°F 5-180°C/356°F 6-190°C/375°F 7-200°C/392°F 8-210°C/410°F 9-220°C/428°F 10-230°C/446°F 1) Switch on the ROOR Vapor with the switching power adapter. ROOR VAPOR basic ROOR VAPOR XL Connect the heating element to the power adapter and power plug with the socket. WARNING WiththeXLmodel,thecontrollerMUSTbeplaced betweenthepoweradapterandheatingelement. NEVERconnectwithoutcontrollerotherwise too much power will enter the heating elementandthedevicemaybedamaged. Switching power adapter Temperature adjustment controllerHeatingelement Heatingelement Power plug (US) (EU) Power plug

×