Successfully reported this slideshow.

Nokia secret codes.


Published on

Published in: Technology
  • i have tested her and i need to tell you all she's legit and affordable. Godeyeviewhacker AT hotmail DOT com is the best hacker alive. I was lost with no hope when my credit score was low as 580 and i'm broke as hell because i was ripped by some fake group calling themselves hackers. I contact the God eye and i was told to wait for 24 hours after funding exploits and i got to have a good credit score and it's now over 800, I owe her a lot as she has made my life better because i'm not broke anymore. She's also interested in some hacking problems. Cheating spouse, Hacking school grades, Deleting of criminal records, and any hacking problems. get to her on Godeyeviewhacker AT hotmail DOT com and get to look for me to thank me because he's indeed a great guy!
    Are you sure you want to  Yes  No
    Your message goes here
  • good platform
    Are you sure you want to  Yes  No
    Your message goes here

Nokia secret codes.

  1. 1. Tips / undocumented functions:- At the top of the main-menu and every folder, the keys 1 to 9 are shortcuts to the icons 1-9- A shortcut on the left menukey in standby-mode will take more time to open than a shortcut onthe right menukey. Reason: The left key is also used for the keylock so it shortly waits forpressing the * button.- While writing text press and hold "#" to switch between Alpha mode and Number mode. Youcan also press a key long to insert its number.- In standby-mode, press and hold 0 to launch your wap home page.- If you have your keylock activated just press the on/off button to turn on your backlight to lookat the time when its dark without having to unlock the keypad.- To keep the backlight on, run Torch (freeware), press and hold the Menu button and gosomewhere else on the phone.- To check your current firmware version simply type *#0000# in standby screen.- To check your IMEI (International Mobile Equipment Identity) type *#06# in standby screen.- To check your Bluetooth device address type *#2820# in standby screen.- Start up in Safe Mode (no auto start apps will be running): Hold down the pencil key when youturn on the phone and hold it on until you have to enter your PIN code.- Format the phone memory by typing *#7370# in standby screen.- In standby mode,45# + <talk> dials the number on your sim in memory slot 45.50# + <talk> dials slot 50 and so on...............................................................................................................................................................*# 06 # Seriennummer/IMEI indicates (actually also a GSM is code - see further below)-----------------------------------------------------*# 0000 # SW version announcements (e.g. V3.42.1, 16-10-03, Nhl-10)---------------------------------------------------------*# 2820 # Bluetooth (BT) device address indicate------------------------------------------------------------xx # Directory quick access (xx = storage location and afterwards lozenge e.g. 24 #)---------------------------------------------------A/from key Short pressing for menu for switching between profiles-------------------------------------------------------------------Menu key Long pressing for "task manager" - switching between active programs (with "C" keyprograms can be terminated.)------------------------------------------------------------------
  2. 2. Menu quick access Over in the menu e.g. to point 3.1 arrive simply 31 enter (if the third symbola file is opened is for these and then in it started the first Programm/Icon).---------------------------------------------------------------------Autostart go around When switching on of the Handys on to the pin inquiry the key "ABC" (pin)comes the whole time keeps pressed - this is to ignore (allegedly) the autoinitializationprograms.------------------------------------------------------------------------# Do not switch between different lines (AS)... goes e.g. with Austrian ONE Handys (see nosecunning). I could not try out however also, since I did not have 2 lines on the SIM map.-------------------------------------------------------------------------12345 ... is according to standard set the Nokia nokia-Sicherheitscode.--------------------------------------------------------------------0000 ... is according to standard those (with Vodafone windshield frame section) set 2te pin andthat standard net code/passwordWith D1 the standard net code is the last 4 numbers of the card number without HLR e.g.99999234-5/55 - > 2345------------------------------------------------------------------------0 - for a long time press If one the "0" in the main menue for a long time presses thosehomepage of the standard WAP connection is called.------------------------------------------------------Your files in MMC are stored in multiple (disk) blocks.So if you format using 16K block, the space used will be 16K eventhough your file is just 1K.If you buy MMC, it is usually preformatted with 16K block. Therefore alot of space is wasted asmost installed program files are usually less than 2K.You will need a card reader to do this:-1. Connect card reader and copy all your files in the MMC to computer disk.(Make sure you set the show all/hidden/os files to "on")2. Do a format of the MMC using command line "format" and use the /A=size option.Alternative, you can use the Disk Management in Adminstrative Tools to format.Make sure you select FAT. For 256MB MMC, smallest block you can use is 4K, 128MB is 2K,64Mb is 1K and 32MB is 512B.(Note: You cannot use the phone "format MMC" to do this as the format just clear the allocationtable and does not change the block size)3. Copy back all files to MMC.Now you will find that you will have more space.256mb MMC got back 30+ mbs..............................................................................................................................................................Caution - starting from here the codes are " Very dangerous"*#7370925538#
  3. 3. * # of res wallet # ... is to be deleted the code around the "wallet"! Input like normal telephonenumber (not in wallet code inquiry windows).NOTE! Afterwards the "wallet" is empty, can again be put on however with new code.-----------------------------------------------------------------*# 7780 # The "original attitudes" and telephone re-establishes is again started (an appropriateinquiry and it follow before must the sicherheitscode be entered).NOTE! Afterwards various "attitudes" are away - among other things these:·1 Points of entrance (Provider dependent points of entrance and attitudes)·2 Bluetooth attitudes·3 Favorite·4 Allocation of the two keys (beside Navi keys) in the main menue·5 Profiles are "neglected" (as with distribution) - still there however new bell tones, etc. are...·6 SMS/MMS/E Mail attitudes·7 Logos and spielstaende (allegedly) also deleted...Programs, calendars and contacts, etc. not changed...Also the sicherheitscode remains.This putting back goes also via menu under "attitudes - general - original telephone once.".-------------------------------------------------------------------------*# 7370 # Soft format: If the Handy (only telephone memory) formats, puts back the attitudes(see * to # 7780 #) and implements a software RESET. (however still another inquiry comesbefore.)NOTE! If the Akku to 75% are loaded at least, Akku do not only accomplish during theprocedure under any circumstances remove! The procedure takes some minutes (approx. 3-4),is absolutely waiting!This is "only" a soft format... Hard format with "green, 3, *"... see below.--------------------------------------------------------------------Green, * 3 Hard format: If the Handy (only telephone memory) formats, puts back the attitudes(see * to # 7780 #) and implements a RESET.NOTE! If the Akku to 75% are loaded at least, Akku do not only accomplish during theprocedure under any circumstances remove! The procedure takes some minutes (approx. 3-4),is absolutely waiting!Proceeding: Equipment switch off, which keep "green key" (take off) at the same time pressed,"*" and to "3" key and switch the equipment on (the keys thereby keep further pressed)... to"Formatting" on the display appears...If that does not function, then equipment for 1 hour switch off, Akku so for a long timerausnehmen and again try."only" virtual the memory is generally cleared - genuine formatting can take place only in aNokia service center, if the Fash is deleted there and/or new L.G. is installed.------------------------------------------------------------------------------------------------------------------------------Mixed * # 92702689 #, then switch - system menu off (goes with me not)The following code do not fold (with me also):* EFR0 # (* 3370 #) EFR activate (EFR = Enhanced Full rate Coding - language optimization)# EFR0 # (# 3370 #) EFR switch off* HRC # (* 4720 #) HRC switch on (HRC = helped rate Coding - language compression)# HRC0 # (# 4720 #) HRC switch off----------------------------------------------------------------SIM LOCK Simlock status query: (use "*" the key over "p,w" and "+" indications to enter)# pw+ 1234567890 +1 # Provider LOCK status
  4. 4. # pw+ 1234567890 +2 # network LOCK status# pw+ 1234567890 +3 # Country LOCK status# pw+ 1234567890 +4 # Sim Card LOCK statusThe code 1234567890 must be computed with a program e.g. SmartDCT4Calc and/or DCT 4code Calculator from IMEI, etc....Info. to Simlock: SIM LOCK makes it for the offerer/network carriers possible, subsidized(verguenstigte) Handys to offer. Thus one makes oneself if necessary punishable if one SIMLOCK deactivated - in addition the warranty can purged. I take over for it no adhesion orresponsibility!------------------------------------------------------------------------GSM code ... should function at each Handy - however Netz(betreiber)abhaengig are... and"harmless"...Generally applies: First enter code, "send" afterwards (< send green key > press) and onemoment wait...------------------------------------------------------------------SMS Tipps To Tipps & cheat about SMS (with appropriate codes) are immediately in the FAQlist .For example for the topic: SMS "retard" and/or deferred send, acknowledgment of receipt,reports...----------------------------------------------------------------Mark more simply To Tipps & cheat to the topic "mark" e.g. with SMS entrance.Over simply to mark simply the "pin" (ABC key) hold some e.g. SMS and move then Jostickdownward.------------------------------------------------------------------------------------------------------------------------------Call number transmission * 31 # - { CLIR - Calling LINE identification Restriction switches on forthe general call number transmission }# 31 # - switch off the general call number transmission# 31 # [ telephone number ] - with the next call suppress the own call number (thus temporary)* 31 # [ telephone number ] - with the next call transfer own call number (thus temporary)* # 31 # - status query (of call number transmission)# 31 * [ telephone number ] - own call number show, although receiving station switched callnumber suppression on. (is not usually de-energised of the Netz(betreiber).)* 30 # - switch { TIE-clip - Calling LINE identification presentation for the announcement on ofthe call number of the caller }# 30 # - switch off* # 30 # - status queryThis also partly goes with 6600 via Men: Attitudes - calls - own No. send...The following codes are not supported by most Netz(betreibern):* # 76 # - announcement of the call number, under which one reached the calling (not its callnumber during rufumleitung!) { COLP - COonnected LINE identification presentation }* 76 # - switch on# 76 # - switch off* # 77 # - announcement of the call number, under which the caller reached me (not my callnumber during rufumleitung meinerseits!) { COLR - COnnected LINE identification Restriction }* 77 # - switch on
  5. 5. # 76 # - switch off------------------------------------------------------------------------------------------------------------------------------Call bypasses (call Forwarding) Bypass code (U):U=21 alwaysU=61 retardsU=62 not attainableU=67 occupiesU=61, 62, 67 can be parallel activeU=21 - > and then no more call signaling overwrites U=61,62 and 67!Service code (D):Not all nets support all servicesD=10 language and fax (all calls)D=11 only languageD=12 all data (speed/minutes)D=13 only faxD=14 DATEX j (active?)D=15 teletex (active?)D=16 only SMSD=18 all data except SMSD=19 all services except SMSD=20 all servicesD=21 all asynchronous servicesD=22 all synchronous servicesD=23 3.1 kHz GSM of language servicesD=24 all synchronous POINT ton of POINT DATA inclusive. PADsD=25 only data (all asynchronous POINT ton of POINT DATA inclusive. PADs)D=26 DATA pack exchange on the left of inclusive. PADsD=27 services thru PADsD=29 12 Kbps digitally left------------------------------------------------------------------------------------------------------------------------------** U * [ goal call number ] * D # - bypass switch onInput without * D means bypass of all servicesCall bypasses (call Forwarding)01.01.04 Bypass code (U):U=21 alwaysU=61 retardsU=62 not attainableU=67 occupies** U * [ goal call number ] * D # - bypass switch onInput without * D means bypass of all services## U ** D # - switch bypass off (individual bypasses and service code)Without ** D all services are switched off to bypasses## 002 # (all bypasses for all service codes switch off)## 004 # (switch off only U=61, 62, 67 and for all service codes - thus ", not attainable,nonacceptance "occupies)
  6. 6. * # U ** D # - status of the bypasses query:Input without ** D queries all services and bypassesBypass in the speaking and/or fax box: Number in bypass procedure with D=11 and/or 13 enterGoal call number (e.g. D2-Netz: +49,172 xxx) and Handynummer without preselection (ifnecessary 172 replaces) enter.Tap: During switched on rufumleitung "with occupied" being able "to reject" calls by one the redkey during "to ring" presses. The caller is then passed on to the goal call number of theoccupying bypass (e.g. mailbox).Type for waiting period during rufumleitung 61: ** 61 * [ goal call number ] * 11 * [ time in sec. (5to 30) ] #This also partly goes with 6600 via menu: Attitudes - rufumleitungen -...------------------------------------------------------------------------------------------------------------------------------Knock/stops/parks/faults Knocks is signaling a secondary call during a current discussion* 43 # - switch on# 43 # - switch off* # 43 # - status queryThis also partly goes with 6600 via menu: Attitudes - calls - knocking...0 < sends > - reject while the discussion a knocking1 < send > - discussion terminate, knocking discussion acceptcertain discussion (y) terminate 1 (y) < send >2 < sends > - discussion park, knocking discussion acceptcertain discussion and new discussion leads 2 parks (y) < sends >0 < sends > - caller the busy condition signalThis also partly goes with 6600 via menus existing during the discussion.------------------------------------------------------------------------------------------------------------------------------Call barrier Possible only if bypass of the service code is switched off.Check code (S):S=33 all outgoing transmissionsS=331 outgoing abroadS=332 outgoing abroad except homeS=35 all arriving transmissionsS=351 all arriving abroadSpecial check codes (s) delete:Switch off only in connection with the procedureS=330 check code status outgoing & arriving transmissions switch offS=333 check code status outgoing transmissions switch offS=353 check code status arriving transmissions switch offService code (D):Not all nets support all servicesD=10 language and fax (all calls)
  7. 7. D=11 only languageD=12 all data (speed/minutes)D=13 only faxD=14 DATEX j (active?)D=15 teletex (active?)D=16 only SMSD=18 all data except SMSD=19 all services except SMSD=20 all servicesD=21 all asynchronous servicesD=22 all synchronous servicesD=23 3.1 kHz GSM of language servicesD=24 all synchronous POINT ton of POINT DATA inclusive. PADsD=25 only data (all asynchronous POINT ton of POINT DATA inclusive. PADs)D=26 data packet exchange links incl. PADsD=27 services thru PADsD=29 12 Kbps digital link------------------------------------------------------------------------------------------------------------------------------CHECK SIM-LOCKNote - If you bought your Nokia on UK Vodafone or UK Cellnet you do not need to check thisbecause they both transmit on GSM900, and they dont lock the phones. However if you boughtyour phone on UK Orange or UK One2one your phone may be blocked. The reason is that theyboth transmitt on GSM1800. To make a call on GSM1800 you need what is known as a "Dualband" phone. A dual band phone is able to transmit on both GSM900 and GSM1800, so theylock the phones so you cant use it with any other network simcard. If you find that your phone islocked you can try different software to unlock it. (we havnt found one that works yet), or youcan ask your service provider who will gladly exchange the 10 digit code for about £35.This is how to check the status of the 4 different locks. Aslo dont try entering the wrong number,because after 3 times it will block the phone for good.There are 4 different locks on your Nokia phone.COUNTRY-LOCKNETWORK-LOCKPROVIDER-LOCKSIMCARD-LOCKThe code to read out the sim-lock status of your phone is#PW+(MASTERCODE)+(Y)#
  8. 8. # = DOUBLE-CROSSW = PRESS "*" THREE TIMESP = PRESS "*" FOUR TIMES+ = PRESS "*" TWO TIMESMASTERCODE = 1234567890Y = NUMBER 1 TO------------------------------------------------------------------------------------------------------------------------------THE JAMES BOND TRICKIf you short-circuit theleft middle and right pins on the bottom of the phone with all connectionstouching each other, the Nokia software hangs! The profile "Headset" will be activated. Beforeyou do this just activate the "Automatic Answer" in the headset profile and set the ringingvolume to "Mute". Now you can use your phone for checking out what people are talking aboutin a room. Just place it under a table in a room and call it. The phone receives the call withoutringing and you can listen to what people are saying.-----------------------------------------------------Clock StoppingTo check weather your SIM Card supports clock stopping type-*#746025625# (*#SIM0CLOCK#)---------------------------------------------To enter the service menu type-*#92702689# (*#WAR0ANTY#)Serial number (IMEI)Production date (MM/YY)Purchase date (MM/YY) You can only enter the date once.Date of last repair (0000=No repair)Transfer user data to another Nokia phone via Infra-Red------------------------------------------------------------------------------------------------------------------------------Codes for some older nokia phone------------------------------------------Nokia codeThese Nokia codes will work on most Nokia mobile phones, however we accept no responsibilityof any kind for damage done to your phone whilst trying these Nokia secret codes.
  9. 9. Nokia code Code function*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phoneuses the best sound quality but talk time is reduced my approx. 5%#3370# Deactivate Enhanced Full Rate Codec (EFR)*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gainapprox 30% more Talk Time*#4720# With this Nokia code you can deactivate the Half Rate Codec*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line :Software Release Date, 3rd Line : Compression Type*#9999# Phones software version if *#0000# does not work*#06# For checking the International Mobile Equipment Identity (IMEI Number)#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+"symbols)#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+"symbols)#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+"symbols)#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+"symbols)*#147# This lets you know who called you last (Only vodofone)*#1471# Last call (Only vodofone)*#21# This phone code allows you to check the number that "All Calls" are diverted to*#2640# Displays phone security code in use*#30# Lets you see the private number*#43# Allows you to check the "Call Waiting" status of your cell phone.*#61# Allows you to check the number that "On No Reply" calls are diverted to*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls arediverted to*#67# Allows you to check the number that "On Busy Calls" are diverted to*#67705646# Phone code that removes operator logo on 3310 & 3330*#73# Reset phone timers and game scores*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature"SIM Clock Stop Allowed", it means you will get the best standby time possible*#7760# Manufactures code*#7780# Restore factory settings*#8110# Software version for the nokia 8110*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair(0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone offthen on again*#94870345123456789# Deactivate the PWM-Mem**21*number# Turn on "All Calls" diverting to the phone number entered**61*number# Turn on "No Reply" diverting to the phone number entered**67*number# Turn on "On Busy" diverting to the phone number entered12345 This is the default security codepress and hold # Lets you switch between linesNokia 1610 / 1611
  10. 10. --------------------------------------------------------------------------------Nokia 1610 / 1611*#06# for checking the IMEI (International Mobile Equipment Identity)*#170602112302# shows the SW version.Nokia 2010--------------------------------------------------------------------------------Nokia 2010To view IMEI number *#06#To view Software Version enter *#9999#*3001#12345 for field test mode and nam selection and some other stuff...Nokia 3210--------------------------------------------------------------------------------Nokia 3210*#06# for checking the IMEI of the phone*#0000# shows the software version.Nokia 3310--------------------------------------------------------------------------------Nokia 3310*#06# To find IMEI (International Mobile Equipment Identity)*#7780# restores Factory Settings..(Memory, language, counters not included)*#3110# for checking the phones software (SW) - called firmware revision information.*#746025625# [*#sim0clock#] to check if the Sim-Clock can be Stopped(Sim-clock-stop is a kind of standby mode which will save battery time)*#92702689# [*#war0anty#] Phone asks warranty code:Press the following warranty code:6232 (OK) : Displays the Month and Year of Manufacture9268 (OK) : Displays Serial Number7332 (OK) : Displays the date of the last repairment - if found7832 (OK) : Displays (if found) the date where the phone was purchased37832 (OK) : Set the Purchasing Date MMYY (This date can be set only once!)
  11. 11. 87267 (OK) : Transfers ALL phone numbers, Logos, and ringtones from other gsm phones--------------------------------------------------------------------------------Nokia 3810To view IMEI number *#06#To view Software Version enter *#3810#------------------------------------------------------------------------------------------------------------------------------Nokia 5110*#06# To look for the IMEI of the phone*#0000# shows the software version.*#746025625# - [*#sim0clock#]Looks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will savebattery time. This code doesnt work with software version 4.59.*3370# activates the Enchanced Full Rate, after the phone has been turned off. EFR producesbetter voice quality but also consumes more power.#3370# deactivates the EFR, after the phone has been turned off.*4720# Activates the Half Rate Codec, after the phone has been turned off. HRC producespoorer voice quality but gives your battery better stand-by times.#4720# Deactivates the Half Rate Codec, after the phone has been turned off.Enhanced Full Rate will give you much better sound quality when you enable it. The new EFRcodec uses the ACELP compression technology. This technology allows for much great voicequality in the same number of bits as the older Full Rate codec. The older technology was calledLPC-RPE. Both operate at 13 kilobits, but you take up more space on the network, so they cancharge you more. Talk-time is reduced with about 5%Half Rate will give you poorer voice quality, which gives the service provider the opportunity tohave more calls on the network, and you might get a lower charge from them. Will give you 30%longer talk-time.Nokia 5120--------------------------------------------------------------------------------Nokia 5120*3001#12345# gives access to NAM1 and 2, sw version, security, alpha tags and heaps of otherstuff.Nokia 5190*#06# for checking the IMEI (International Mobile Equipment Identity)
  12. 12. *#5190# shows the SW version.*#92772689# (after removing the analog module) shows service menu.*3001#12345[OK] to enter test mode.*#639# to change NAM.------------------------------------------------------------------------------------------------------------------------------Nokia 6080 / 6081*#06# for checking the IMEI (International Mobile Equipment Identity)*#0000# shows the SW version.Nokia 6120 / 6160 / 6162 (TDMA phones)*#92772689# for checking ISDN number.*3001#12345# for field test mode and nam selection and some other stuff...*#9999# shows the SW version.------------------------------------------------------------------------------------------------------------------------------Nokia 6150*#06# for checking the IMEI (International Mobile Equipment Identity)*#0000# shows the SW version.*#92702689# to enter service menu.*#92702689# [*#war0anty#]You dont need the warranty-codes any more - you can just scroll through the information like inany other menu. It has the the same data as 81xx and 31xx phones (with "Edit" button forpurchase date, and "User data transfer").Menu:1: Displays Serial Number.2: Displays the Month and Year of Manufacture (0997)3: Displays (if there) the date where the phone was purchased (MMYY) you can here set thePurchasing Date (Warning: You can only do this once - so be careful what you write...)4: Displays the date of the last repairment - if found (0000)6: The option is for transferring ALL the telephone data (from the memory) to a "box" so that thetechnician can fiddle with the phone without worrying about the data stored on it. Stuff stored onthe SIM is not transferred, but who delivers their phone with the SIM?------------------------------------------------------------------------------------------------------------------------------Nokia 6190*#06# for checking the IMEI (International Mobile Equipment Identity)*#6190# shows the SW version.*#92772689# (after removing the analog module) shows service menu.*3001#12345[OK] to enter test mode.*#639# to change NAM.------------------------------------------------------------------------------------------------------------------------------Nokia 7110
  13. 13. *#06# for checking the IMEI (International Mobile Equipment Identity)*#0000# To view Software Version.*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.*#4720# - Half Rate Codec activation. It will automatically restart*#4720* - Half Rate Codec deactivation. It will automatically restart*#746025625# - Sim clock allowed status.*#92702689# [*#war0anty#] - takes you to a secret menu with 6 choices:1. Displays Serial Number.2. Displays the Month and Year of Manufacture (0997)3. Displays (if there) the date where the phone was purchased (MMYY)4. Displays the date of the last repairment - if found (0000)5. makes you capebel of transferring user data if you have the gear for it6. shows how many hours the phone has been on------------------------------------------------------------------------------------------------------------------------------Nokia 8260Change Alpha TagThe alpha tag is the message that is displayed on your phone when in digital coverage. This isnormally transmitted by the network, but can be overidden to display a different tag. This is doneby creating a tag for a personal/residential zone in the phone, and setting this zone to have thesame settings as your normal carrier. So when the phone identifies the network system itbelieves it is in the personal/residential zone and displays the tag you have programmed.1) Enter programming mode of the phone by keying *3001#12345#2) Find out the ID of your operator by entering the NAM1 menu. Note the Home System IDsetting. (16387 on Rogers AT&T in Calgary)3) Scroll to and enter PSID/RSID lists (menu 7)4) Select P/RSID 15) Scroll to PSID/RSID and change the setting to 16) Scroll to Connected system ID and change the setting to the ID of your system (eg 16387)7) Scroll to Alpha Tag and enter the message you would like displayed.8) Scroll to Operator code (SOC) and enter coed for your provider such as 2050 for Rogers or2049 for AT&T9) Scroll to Country code and enter 302 for Rogers or 310 for AT&T10) Power cycle your phone and hopefully your message will be displayedNote: This has only been tested in Calgary on the Rogers AT&T network so may not work onother networks.*3001#12345# Programming Menu: NAMs, Fieldtest, Serial Number, P/RSIDs*#639# Program Phone Number*#92772689# Warranty Information, Serial Number, Life Timer, Build Date, Programmed Date(editable once only)*#9999# Display Software Version------------------------------------------------------------------------------------------------------------------------------Nokia 8820 / 8860
  14. 14. *3001#12345# gives access to NAM1 and 2, sw version, security, alpha tags and heaps of otherstuff.------------------------------------------------------------------------------------------------------------------------------Nokia 8850*#06# for checking the IMEI (International Mobile Equipment Identity)*#0000# To view Software Version.------------------------------------------------------------------------------------------------------------------------------some other codes--------------------------------------------------------------------------------*** WARNING: Using secret codes may be harmful to your phone and result in disabling orworse. Use these codes at your own discretion, we accept no responsiblility for blocked poneswhile using these codes!!!******IMEI Number*#06# Cells Identity Code (IMEI = International Mobile Equipment Identity)XXXXXX XX XXXXXX XTAC FAC SNR SPTAC = Type Approval Code (first 2 digits = country code of the approval-country )FAC = Final Assembly Code: (01,02 = AEG)(10,20 Nokia)(40,41,44 Siemens)(30 Ericsson)(50 Bosch)(51 Sony,Siemens,Ericsson)(60 Alcatel)(65 AEG)(70 Sagem)(75 Dancall)(80 Philips)(85 Panasonic)SNR = Serial Nr.SP = Spare (always "0")Software Version*#0000# shows the software versionSignal Processing*3370# - Enchanced full Rate Codec (EFR) activation. It will automatically restart.#3370# - Enchanced full Rate Codec (EFR) deactivation*4720# - Half Rate Codec activation. It will automatically restart.#4720# - Half Rate Codec deactivationEnchanced Full Rate will give you much better sound quality when you enable it. The newEnhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation
  15. 15. Linear Prediction) compression technology. This technology allows for much great voice qualityin the same number of bits as the older Full Rate CODEC. The older technology was calledLPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13kilobits.(but you take up more space on the network, so they can charge you more) - Talk-timeis reduced with about 5%Sim Clock Stopping*#746025625#[*#sim0clock#]Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which willsave battery time. This code doesnt work with software version 4.59.It will tell you if it can be stopped or not.Warrenty Menu*#92702689# takes you to a secret menu with 6 choices:[*#war0anty#]1. Displays Serial Number.2. Displays the Month and Year of Manufacture (0997).3. Displays (if there) the date where the phone was purchased (MMYY).4. Displays the date of the last repairment - if found (0000).5. Makes you capable of transferring user data if you have the gear for it.6. Shows how long the phone has been used to talk. This counter is not reset by when you"clear timers" like the counters in the call register.Bypass the SP lock With a Nokia 16xx/21xx/31xx/51xx/81xx1. Insert SIM card of different provider.2. Turn on the phone and press the UP VOLUME key for 3 sec.Then release it and the phone says PIN CODE?3. Press the "C" key.4. Then Press * and wait until it disappears and appears again, then press * one more time and04*PIN*PIN*PIN#------------------------------------------------------------------------------------------------------------------------------Nokia Speed Trap Detector Urban Legend spread by Nokia Engineers ;^)The settings for radar speed traps detector. Your Nokia cell phone can be programmed to pickup radar speed traps, when programmed your cell phone picks up the radar and alerts you onthe message alert tone. ( Doesnt work with Nokia 7110! )1. Enter your menu2. Select settings3. Select security settings4. Select closed user group5. Select on6. Enter 000007. Press ok8. Clear back to normal, within a few seconds your phone will display a radar sign with fivezeros next to it. It is now activated.
  16. 16. Unfortunately only Nokia phones have this function. The Cell Phone info display needs to be de-activated. Settings -> Phone Settings -> Cell Info display. Each time you turn off your phone, oreven each time you loose contact with your carrier, youll have to activate it again... It is doneusing steps 1 through 5 above, but the number (00000) will be already on the field as a default.------------------------------------------------------------------------------------------------------------------------------Network Monitor--------------------------------------------------------------------------------Network MonitorThere is a hidden menu inside your Nokia phone. If you want to activate it, youll have to re-program some chips inside of your phone.Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.Take apart the phone.De-solder the EEPROM (ATMEL AT 24C64)Read out the data with an EEPROM programmer and save it to a file (Backup)If you have v.33 or v4.73, change the address "03B8" from "00" to "FF"If you have v5.24 then change the address "0378" from "00" to "FF"Write the new data to the EEPROM and solder it back to the phonePower on your phone and you should have "Netmonitor" enabled.The Network Monitor gives you the following information:Carrier number, MS RX Level in DBM, Received signal quality, MS TX power level, C1 (Pathloss criterion, used for cell selection and reselection). The range is -99 to 99, RTL (Radio linktimeout), Timeslot, Indication of the transmitter status, Information on the Network parameters,TMSI (Temporary Mobile Subscriber Identity), Cell identification (Cell ID, Number of cells beingused), MCC (Mobile country code), MCN (Mobile network code), LAC (Location area code),Ciphering (On/Off), Hopping (On/Off), DTX (On/Off), Discard cell barred information.------------------------------------------------------------------------------------------------------------------------------GSM Network Services Command StringsWhen various network functions are selected via the cellphones menu using the keypad, thecellphone automatically generates the corresponding GSM network command string andtransmits it to the network. These commands can however be manually entered via the keypad.Each command is prefixed with either one or two * or # characters as follows:** Register and Activate* Activate## De-Register (and Deactivate)# Deactivate*# Check Status© Call button------------------------------------------------------------------------------------------------------------------------------Once each command has been entered, if it is a network command (as opposed to a localhandset command) it must be transmitted to the network by pressing the YES (receiver) keywhich acts as an enter key - this is represented here with the © character. Always enternumbers in full international format +CountryAreaNumber (e.g. +447712345678).Command Description Command StringSecurity
  17. 17. Change call barring code **03*OldCode*NewCode*NewCode#©Change call barring code **03*330*OldCode*NewCode*NewCode#©Change PIN code **04*OldPIN*NewPIN*NewPIN#©Change PIN2 code **042*OldPIN2*NewPIN2*NewPIN2#©Unlock PIN code (when PIN is entered wrong 3 times) **05*PUK*NewPIN*NewPIN#©Unlock PIN2 code (when PIN2 is entered wrong 3 times) **052*PUK2*NewPIN2*NewPIN2#©Display IMEI *#06#Call Forwarding (Diversions)De-register all call diversions ##002#©Set all configured call diversions to number and activate **004*number#©De-register all configured call diversions (no answer, not reachable, busy) ##004#©Unconditionally divert all calls to number and activate **21*number#©Activate unconditionally divert all calls *21#©De-register unconditionally divert all calls ##21#©Deactivate unconditionally divert all calls #21#©Check status of unconditionally divert all calls *#21#©Divert on no answer to number and activate **61*number#©Activate divert on no answer *61#©De-register divert on no answer ##61#©Deactivate divert on no answer #61#©Check status of divert on no answer *#61#©Divert on not reachable to number and activate **62*number#©Activate divert on not reachable *62#©De-register divert on not reachable ##62#©Deactivate divert on not reachable #62#©Check status of divert on not reachable *#62#©Divert on busy to number and activate /td> **67*number#©<Activate divert on busy *67#©De-register divert on busy ##67#©Deactivate divert on busy #67#©Check status of divert on busy *#67#©Change number of seconds of ringing for the given service before diverting a call (such as on noanswer). Seconds must be a value from 5 to 30. De-registering the same divert will also deletethis change! **service*number**seconds#© (Service numbers, see below)Call barringActivate barr all outgoing calls (see Security to set code) **33*code#©Deactivate barr all outgoing calls #33*code#©Check status of barr all outgoing calls *#33#©Activate barr all calls **330*code#©Deactivate barr all calls #330*code#©Check status of barr all calls /td> *#330*code#©<Activate barr all outgoing international calls **331*code#©Deactivate barr all outgoing international calls #331*code#©Check status of barr all outgoing international calls *#331#©Activate barr all outgoing international calls except to home country **332*code#©Deactivate barr all outgoing international calls except to home country #332*code#©Check status of barr all outgoing international calls except to home country *#332#©Activate barr all outgoing calls **333*code#©Deactivate barr all outgoing calls #333*code#©Check status of barr all outgoing calls *#333#©
  18. 18. Activate barr all incoming calls **35*code#©Deactivate barr all incoming calls #35*code#©Check status of barr all incoming calls *#35#©Activate barr all incoming calls when roaming **351*code#©Deactivate barr all incoming calls when roaming #351*code#©Check status of barr all incoming calls when roaming *#351#©Activate barr all incoming calls **353*code#©Deactivate barr all incoming calls #353*code#©Check status of barr all incoming calls *#353#©Call waitingActivate call waiting *43*#©Deactivate call waiting #43##©Check status of call waiting *#43#©Calling Line IdentificationThe following only works if CLIP and CLIR are enabled (ask your service provider)CLIP: Presentation of the number of the incoming callActivate CLIP **30#©Deactivate CLIP ##30#©Check status of CLIP *#30#©CLIR: Presentation of ones own number to the to the called partyActivate CLIR **31#©Activate CLIR for the actual call *31#number©Deactivate CLIR ##31#©Deactivate CLIR for the actual call #31#number©Check status of CLIR *#31#©COLP: Presentation of the actual number reached (if number called was diverted to anothernumberActivate COLP *76#©Deactivate COLP #76#©Check status of COLP *#76#©COLR: Presentation of the original number called by the calling party (if the call was diverted tothis cellphone)Activate COLR *77#©Deactivate COLR #77#©Check status of COLR *#77#©------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------GSM Network Service CodesNote that at present only the following service codes are in use:11 Speech13 fax25 dataCell BroadcastWhile Short Message Service (SMS) can be configured as a personal service, Cell Broadcast isa general service which is designed for subscribers of a specific cell or topic. For example, asubscriber to cell 050 in England will receive information on the GSM tower currently being usedby their phone. This new concept brings a whole new meaning to the term mobile
  19. 19. communications as the phone is now able to receive information such as share prices orweather updates without the need of data cards and computers. At present the followingmessage types exist (note: this may vary from carrier to carrier and some carriers may chargefor this service):Code Title000 Index010 Flashes020 Hospitals022 Doctors024 Pharmacy030 Long Distant Road Reports032 Local Road Reports034 Taxis040 Weather050 District052 Network Information054 Operator Services056 Directory Inquiries (national)057 Directory Inquiries (international)058 Customer Care (national)059 Customer Care (international)In the future one will be able to control each individual call by use of the following service codes.To do this the user has to insert the service code in front of the last # in the MMI commandabove.For example the sequence *21*number*16# would divert all SMS calls (and only these) to thegiven number.GSM Operator Codes202-01 COSMOTE - Greece202-05 Greece Panafon S A Panafon202-10 Greece STET Hellas STET Hellas204-04 KPN Telecom (GSM 900)204-08 Libertel (GSM 900)204-12 Telfort (GSM 1800)204-16 Ben (GSM 1800)204-20 Dutchtone (GSM 1800)206-01 Belgium Belgacom BEL PROXI206-10 Belgium Mobistar BEL mobistar206-20 KPN Orange Belgium SA208-01 France France Telecom F Itineris208-01 Monaco France Telecom F Itineris208-10 France SFR F SFR208-10 Monaco SFR F SFR208- France Bouygues Telecom Bouygues213-03 Andorra STA Andorra AND M-AND214-01 Spain Airtel Airtel
  20. 20. 214-03 Spain AMENA214-07 Spain Telefonica Moviles MSTAR216-01 Hungary Pannon GSM Pannon216-30 Hungary Westel H-Westel 900216-70 Hungary Vodafone (GSM 900/1800)218-01 Bosnia Cronet Cronet218-90 Bosnia PTT Bosnia BIH PTT-GSM219-01 Croatia HPT Croatian PTT HR-CRONET219-10 Croatia VIPNET220-01 Serbia Mobile Telecomm. MOBTEL220-03 YU PTT220-02 Montenegro PROMONTE GSM220-04 Montenegro MoNet GSM220-07 Serbia Promonte PROMONTE GSM222-01 Italy Telecom Italia Mobile TIM222-01 San Marino Telecom Italia Mobile TIM222-01 The Vatican Telecom Italia Mobile TIM222-10 Italy Omnitel Pronto Italia Omni222-10 San Marino Omnitel Pronto Italia Omni222-10 The Vatican Omnitel Pronto Italia Omni222-88 Wind Telecomunicazioni S.P.A, Vatican and San Marino, Italy222-98 Blu s.p.a. Telefonia mobile Italy226-01 Romania MobiFon226-03 Romania Cosmorom226-10 Romania MobilRom228-01 Switzerland Swiss PTT CH NAT D228-01 Liechtenstein Swiss PTT CH NAT D228-03 Orange Switzerland230-01 Czech republic Radio Mobil CZ Paegas230-02 Czech republic Eurotel Praha EUROTEL-CZ230-03 Czech republic OSKAR231-01 Slovakia Globtel231-02 Slovakia Eurotel Bratislava Eurotel Bratislava232-01 Austria Mobilkom A1232- Austria O Call TS232-03 Austria Max Mobil Telekoms A max.232-05 Connect Austria Gesellschaft für Telekommunikation GmbH - ONE232-07 tele.ring Telekom Service GmbH - Telering234-10 UK Cellnet Cellnet234-15 UK Vodafone Vodafone234-30 UK One2One/Virgine234-33 UK Orange234-50 Jersey Jersey Telecoms Jer 1234-55 Guersney Guersney Telecom GSY-TEL234-58 Isle of Man Manx Telecom Manx235- UK238-01 Denmark Tele Danmark Mobil DK TDK-MOBIL238-02 Denmark SONOFON238- Denmark Telia Denmark Telia DK238- Denmark Mobilix Mobilix
  21. 21. 240-01 Sweden Telia Mobitel S TELIA MOBITEL240-07 Sweden Comviq S COMVIQ240-08 Sweden Europolitan Europolitan240- Sweden Telenordia242-01 Norway Telenor Mobil N Tele-mobil242-02 Norway NetCom GSM A/S N NetCom GSM244-05 Finland Telecom Finland Telecom Finland244-91 Finland OY Radiolinja Radiolinja244- Finland Telivo244- Åland Alands Mobil246-01 Lithuania Omnitel LT OMNITEL246-02 Lithuania Mobilios Telekomunikacijos LT BITE246-03 Lithuania LT TELE2246-04 ir Lithuanian X-GSM Tele2247-01 Latvia Latvias Mobilais Telefons LV LMT GSM247-02 Latvia Baltcom LV BALTCOM248-01 Estonia Eesti Mobiiltelefon EE EMT GSM248-02 Estonia Radiolinja Eesti AS RLE-GSM248-03 Estonia Ritabell Q-GSM250-01 Russia Mobil Telesystems MTS-RUS250-02 Russia NW GSM St Petersburg RUS NWGSM250- Russia DonTelecom250- Russia United Tele Moscow UTM250-38 Russia Wireless Technology250- Russia Extel Mobile Comms Systems250-99 Russia KB Impuls255-01 UKR FLASH257-01 VELCOM Belarus260-01 Poland Polkomtel SA PL-PLUS260-02 Poland Polska TelefoniaCyfrowa PL-ERA GSM260-03 Poland Polska TelefoniaKomorkowa Idea Centertel262-01 Germany DeTeMobil D1 D1-Telekom262-02 Germany Mannesmann Mobilfunk D2 D2-Privat262- Germany E-plus E-plus262- Germany VIAG E2265-01 Ukraine UA UMC UA UMC265- Ukraine Ukrainian Radio System265- Ukraine Bancomsvyaz266-01 Gibraltar Gibtel Gibtel GSM268-01 Portugal Telecel Telecel268-06 Portugal Telemovel P TMN268-03 Optimus270-01 Luxembourg P&T Luxembourg LUXGSM270-77 Luxemburg (900/1800) Millicom.SA L TANGO272-01 EIR Eircell IRL EIR-GSM272-02 EIR Esat Digifone IRL DIGIFONE274-01 Iceland Postur og simi IS SIMINN276-01 Albania AMC AMC278- Malta Advanced278-01 Malta Telecell Telecell
  22. 22. 280-01 Cyprus Cyprus Telecom Auth CY CYTAGSM283-01 RA-ARMGSM284-01 Bulgaria MobiTel CITRON BG286-01 Turkey TurkCell TURKCELL286-02 Turkey Türk Telekom TR TELSIM293-41 Slovenia Mobitel DD SI-GSM293- Slovenia Digitel Digitel294-01 Macedonia PTT Makedonija MKD-MOBIMAK302-37 Canada (PCS) Microcell FIDO310-02 USA (PCS) Sprint Spectrum Sprint310-15 USA (PCS) BellSouth Mobility PCS310- USA (PCS) Pacific Bell Mobile Srvs310- USA (PCS) Western Wireless Corp310-20 USA (PCS) American Portable Telecoms Sprint310-16 USA (PCS) Omnipoint Corporation310-17 USA (PCS)310-27 USA (PCS) Powertel PCS Partners310-66 USA (PCS) DigiPH DigiPH400-01 Azerbadjan Azercell ACELL401-01 Kazakhstan K-Mobile401-02 Kazakhstan K-Cell404-07 India TATA INA-TATA404-10 India Airtel AIRTEL404-11 India Essar ESSAR404-12 India Escotel INA-ESCOTEL404-19 India Escotel INA-ESCOTEL404-20 India Max Touch MAXTOUCH404-21 India BPL Mobile BPL MOBILE404-27 India BPL Mobile BPL MOBILE404-30 India Command COMMAND404-31 India Mobilenet MOBILENET404-40 India Skycell SKYCELL404-41 India RPG MAA RPG MAA404- India Usha Martin404- India Modi Telstra404- India Sterling Cellular SCL404- India Mobile Telecom404- India Airtouch404-43 India BPL Mobile BPL MOBILE404-46 India BPL USWest BPL MOBILE404- India Koshiki404- India Bharti Telenet404- India Birla Comm404- India Cellular Comms404-56 India Escotel INA-ESCOTEL404- India JT Mobiles404- India Evergrowth404- India Modicom404- India Fascel410-01 Pakistan Mobilink MOBILINK
  23. 23. 413-02 Sri Lanka MTN Networks Pvt Ltd SRI DALOG415-01 Lebanon Cellis (FTML) RL Cellis415-03 Lebanon Libancell RL LibCL416-01 Jordan FastLink JOR FSTLNK417-09 Syria Mobile Syria SYR MOB418- Iraq Iraq Telecoms + Posts419-02 Kuwait Mobile Telecom KT MTCNet420-01 Saudi Arabia MoPTT, DMTS-1 KSA ALJAWWAL420-07 Saudi Arabia EAE KSA EAE422-02 Oman General Telecoms GTO424-01 Un Arab Emirat Etisalat UAE ETSLT424-02 Un Arab Emirat Etisalat UAE EG2425- Israel Cellcom Israel Ltd Cellcom426-01 Bahrein Batelco BHR MPLUS427-01 Qatar QTel QAT Q-NET432-11 Iran T.C.I.432- Iran Celcom432- Iran Kish Free Zone438-01 Turkmenistan BCTI452-01 Vietnam MTCS VMS-GSM452-02 Vietnam Vinaphone (GSM 900)454-00 Hong Kong Hong Kong Telecom HK TCSL GSM454-04 Hong Kong Hutchinson HutchinsonGSM454-06 Hong Kong Smartone Mobile Comm SmarTone454- Hong Kong Peoples Telephone Co Ltd455-01 Macao C.T.M. CTM GSM457-01 Laos Lao Shinawatra Telecom460-00 China Guangdong MCC CHNTELGSM460-01 China China United Telecom CHN-CUGSM460- China Guangxi PTB460- China Liaoning PPTA460- China Beijing Wireless460- China Zhuhai Comms460- China Jiaxing PTT460- China Tjianjin Toll Telecom460- China DGT MPT466-92 Taiwan Shungwa Telecom LDM ROCLDGSM502-01 Malaysia My Digi MY DIGI502-02 Malaysia My BSB MY BSB502-12 Malaysia Binariang Maxis Mobile MY maxis502-13 Malaysia Telecom Malaysia Touch MY MRTEL502-16 Malaysia Mutiara Telekom DIGI 1800502-17 Malaysia Sapura Digital Adam PHS MY ADAM502-19 Malaysia Celcom GSM Celcom505-01 Australia Telstra Corporation Limited Telstra505-02 Australia Cable & Wireless Optus Limited YES OPTUS505-03 Australia Vodafone Network Pty Limited VODAFONE505-08 Australia One-Tel (GSM 1800)510- Indonesia PT Kartika Ekamas510-01 Indonesia PT Satelindo IND SAT-C
  24. 24. 510-10 Indonesia Telekomsel TELKOMSELGSM510-11 Indonesia Excelcom IND-EXCELCOM510-15 Indonesia Telekomindo Telekomindo515-01 The Philipines IslaCom ISLA515-02 The Philipines Globe Telecom GLOBE515-03 SMART telecommunications, Phlippines520-01 Thailand Advanced Info Serv Pcl TH AIS GSM520-18 Thailand Tacs WP1800525-01 Singapore Singapore Telecom ST-GSM-SGP525-03 Singapore Mobile One M1-GSM-SGP528-01 Brunei Jabatan Telekom528-11 Brunei DSTCom530-01 New Zealand Bell South BELLSOUTH021542-01 Fiji Vodafone Fiji VODAFONE546-01 New Caledonia Mobilis Mobilis547-20 Fr Polynesia Tikiphone F VINI Fr Pacific Isls Guinea International Wireless604-01 Morocco ONPT Marocko MOR ONPT605-02 Tunesia608-01 Senegal Sonatel612-01 Ivory Coast Comstar612-03 Ivory Coast Ivoiris612-05 Telecel617-01 Mauritius Cellplus Mobile Comms MRU-CELLPLUS624-01 Cameroon PTT Cameroon Cellnet CAM CELLNET633-01 The Seychelles SEZ SEYCEL SEZ SEYCEL634-01 Sudan MobiTel SDN MobiTel636-01 Ethiopia ETA ETH-MTN640-01 Tanzania TriTel TZ-Tritel641-01 Uganda Celtel Cellular CELTEL641-10 Uganda Mobile Telephone Networks MTN Uganda.646-01 Madacom (Madagascar)646-02 Antaris SMM (Madagascar)646-03 SACEL (Madagascar)647-10 Reunion SRR F SFR RU648-01 Zimbabwe PTC Zimbabwe NET ONE649-01 Namibia MTC Network NAM MTC650-01 Malawi Telekom Network MW CP 900651-01 Lesotho Vodacom VCL COMMS652-01 Botswana, Mascom Wireless652-02 Botswana, Vista Cellular655-01 South Africa Vodacom VodaCom-SA655-10 South Africa Mobile Telephone Networks MTN-SA------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Some Tips--------------------------------------------------------------------------------Problems with sending files from 7650 to PC via BT
  25. 25. The following tip can be useful for people using Bluetooth hardware (cards, dongles) equippedwith Widcomm software (MSI, TDK etc).If you cannot send files from your Nokia to PC, you may want to try the following tip:Open your Windows registry in Registry editor: Menu Start -> Run -> Regeditlocate HKEY_CURRENT_USERSoftwareWidcommBTConfigServic es0004 keylocate AcceptOther entrychange its value from 0 to 1reboot your computer.------------------------------------------------------------------------------------------------------------------------------Game Hacking with BlizzardGet the file called the BlizzardN-GAGE.SIS from IRC get in #mediaplace on Efnet (note:Downloading *******/Hacked games is illegal unless you already own a copy of game)The Blizzard Nokia N-Gage Installer.1. Unpack Blizzard.sis file that you get from mIRC2. Transfer the .sis file to your N-Gage3. Get the .blz (N-gage ROM) from mIRC4. copy the file to the root dir of your MMC (16MB MMC)Multimedia Card5. Use the Blizzard application to unpack the .blz file6. After unpacking the sonic icon should appeared in the MENU7. Clicked sonic icon and it should work !List of compatible games for the 3650,6600 and the N-gage that work:[3650]SonicN (v.2.5+)Puyo Pop (v.2.5+)[6600]SonicNPuyo PopPandemoniumTomb RaiderSuper Monkey BallTony Hawks Pro Skater[N-Gage]SonicNPuyo PopPandemoniumTomb RaiderSuper Monkey BallTony Hawks Pro Skater
  26. 26. ------------------------------------------------------------------------------------------------------------------------------To create .3GP (convert avi, mpg to .3gp file)The most easy way: download Nokia Multimedia Player with 3GP support.Download it from here:CODE,8764,42291,00.html(8MB)This is normal video player for PC platform (Windows OS), but it has several additional functions(conversion to 3gp format).1) Download and install player.2) Launch Nokia Multimedia Player. Open your video file (avi or mpg).3) Press File -> Save as...4) Enter filename of your 3gp file, and choose resolution and size limit:MMS 64KB, 128*96MMS 95KB, 128*96MMS 95KB, 176*144Custom 200KB, 128*96Custom 200KB, 176*144Custom 300KB, 128*96Custom 300KB, 176*144No size limit, 128*96No size limit, 176*1445) Click Save. File converted. Thats all!------------------------------------------------------------------------------------------------------------------------------[Howto] Backup one MMC to another MMCBackup one MMC to another MMC Back Up one MMC to another MMCNeeded Items1 MMC Reader1 Cell w/ MMC Ability1 New MMC1 Old MMC1 PCHow To Do it1.) look at the name the first MMC is named and then take it out2.) put in the new MMC3.) format and name the new MMC the same as the other one4.) Take back out the New MMC5.) put the old MMC into a MMC Reader that is connected to your PC6.) Coppy all of the MMC *make sure you have "show hidden files" enabled on your PC. seeaditional info for this setting at the bottom of this message*7.) Make a new folder on your Desktop and Past all files into that folder.8.) Take out the Old MMC and Insert the new MMC into the Reader9.) Open the new folder on your Desktop
  27. 27. 10.) Highlight all of these files and folders, right click on one of the files or folders, select"Coppy"11.) "Past" files and folders to the New MMC12.) put the New MMC back into the cellphone, power up, and your done.How To View Hidden Files in MS WindowsTo view hidden files in Microsoft Windows perform the below steps.1.) Open explorer2.) Click the "Tools" drop down menu.3.) Click either "Folder Options" or "Options".4.) Click the "View" tab.5.) Within the view tab select the option "Show hidden files and folders".Why would you want to do this?1.) No need to reinstall everything after switching your MMC for a Larger MMC.2.) Back your current MMC to the PC just to be safe.. never know if your card will crap out onyou and give errors or just not work.3.) This is the ONLY way to do it.------------------------------------------------------------------------------------------------------------------------------Installation procedure for DKU-5 cableNOTE:: The installation of the cable crivers must be done before installing the pc suite.Also do not have the cable plugged in when installing.Installation::First install the Connectivity Adapter Cable driver software on your computer fromthe CD-ROM supplied in the sales package before installation of Nokia PC Suite.You can download the latest version of Connectivity Adapter Cable driversoftware atCODE the CD-ROM on your computer1. Exit all Windows programs and insert the Connectivity Adapter Cable driverCD-ROM into the CD-ROM drive of your computer.2. If installation does not start automatically, select "Run.." from the "Start"menu and type "D:start.exe" (where "D:" refers to the CD-ROM drive of thecomputer ) and press EnterInstalling the driver1. Follow the on-screen instructions to start an installation wizard, which guidesyou through the setup process of the driver.
  28. 28. 2. The installation wizard first tells you that DKU-5 will be installed on yourcomputer. Click "Next" to continue.3. When the installation has been completed, in some systems the wizardprompts you to restart your computer. Click "Yes". Note that you must restartyour computer before you can use the program.4. Remove any disks from their drives, and then click "Finish" to complete thesetup.For Windows 2000 usersWhen the cable is connected for the first time, Windows 2000 automaticallylocates the drivers and software that you previously installed. If the "Digitalsignature not found" message is displayed during the installation process, click