Gpon fundamentals

19,318 views

Published on

Published in: Technology, Business
4 Comments
28 Likes
Statistics
Notes
No Downloads
Views
Total views
19,318
On SlideShare
0
From Embeds
0
Number of Embeds
45
Actions
Shares
0
Downloads
1,437
Comments
4
Likes
28
Embeds 0
No embeds

No notes for slide
  • Good morning/afternoon, ladies and gentlemen. I’m very glad to have a chance to introduce GPON technology to you. Huawei provides this solution based on fixed network consolidation and migration. Why will we talk about the fixed network consolidation and migration?
  • IN brief the EM’s features cover the full FCAPS areas and we of course also provide this functionality both as a GUI and northbound integration capability.
  • 最大逻辑距离:就是不考虑设备本身硬件处理时延,光纤传输时延等因素的情况下的最大传输距离。 最大物理距离:就是实际的传输距离 最大距离差:就是不同的 ONU 距离 OLT 设备的距离差
  • 1.In GPON, downstream frames are transmitted in a broadcast manner with a fixed length of 125us. Same downstream data arrives at all ONUs and then each ONU filters the incoming data based on ONU-ID. 2.In GPON, upstream frames are transmitted in the TDMA manner. The uplink is divided into time slots and the time slots are allocated to ONUs according to the BWmap field in GPON upstream frames. In this way, all ONUs can transmit data in a certain order and no collision occur. Each frame has 9120 time slots. 3.In GPON, T-CONT is introduced to the uplink. T-CONT is a container that carries data, similar to the VC in the SDH. Data are transmitted through the particular T-CONTs. T-CONT eases bandwidth allocation and facilitates dynamic bandwidth
  • 1.In GPON, upstream frame comprises these fields: PLOu, PLOAMu, PLSu, DBRu, and Payload. The following describes the meanings of these fields: PLOu: Physical layer overhead Upstream. It is for frame location, synchronization and identifies which ONU the frame belongs to. PLOAMu: The PLOAMu field reports maintenance and management status of ONUs. (Not all frames contains this field. Whether to send the field is negotiable.) DBRu: The DBRu field mainly reports the status of T-CONTs. To apply for bandwidth for the next, the field completes the dynamic bandwidth assignment to ONUs. (Not all frames contains this field. Whether to send the field is negotiable.) Payload: The payload of the data. It could be either DBA status report or data frame. If it is the data frame, it consists of GEM header and Frame. GEM header: The GEM header identifies data of different GEM ports. GEM port is the minimum unit for transmitting data in GPON, similar to the PVC in the ATM. Each type of service traffic corresponds to GEM ports, and the GEM port corresponds to T-CONTs. GEM header is divided into PLI, Port ID, PTI and HEC. The meanings of theses parts are as follows: PLI: it indicates the length of the payload. Port ID: it uniquely indicates a GEM port. PTI: it identifies the payload type, mainly identifying the status and type of the data that is currently being sent, such as whether it is the OAM message, or whether the data is transmitted completely. HEC: It provides Forward Error Correction (FEC) and ensures transmission quality.
  • In GPON, downstream frame comprises PCBd and Payload fields. The PCBd is mainly the physical control block, providing frame location, synchronization and bandwidth allocation functions. The Payload is mainly used for loading downstream data. Each frame may consists multiple units. PCBd: It contains the synchronization field, identifying whether to enable the FEC algorithm. The PCBd field is mainly used for the upstream bandwidth allocation to enhance the bandwidth utilization. Of the US BW Map field, AllocID identifies the serial number of T-CONTs; SStart and SStop indicates the number of time slots for starting and stopping transmission respectively; CRC is the parity bit.
  • in 2004, Huawei cooperate with NEUF telecom in France establish world’s first commercial triple play network, which by now, is becoming world’s biggest triple play network provide multi-service for 1,700, 000 customers. In 2006, reference to this successful application, DSL Forum publish it’s TR-101, try to standardize the triple play service.
  • That’s all for my presentation, any questions is welcome.
  • Gpon fundamentals

    1. 1. www.huawei.com HUAWEITECHNOLOGIES Co., Ltd. Huawei Confidential Security Level: GPON –Fundamentals -- Technical Team from FTTH Marketing Department
    2. 2. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 2 Overview of Optical Access Network Analysis of GPON Standards Contents GPON Key Technologies GPON Management and Service Provisioning Basic Concepts of PON Basic Services over GPON Network
    3. 3. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 3 Basic Concepts of PON This chapter describes the basic concepts and working principle of PON network. After reading it, you will have a preliminary understanding on the PON network. This chapter introduces the basic architecture, upstream and downstream working principle of the PON network.
    4. 4. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 4 What is PON? Passive Optical Network OLT ONU Optical Line Terminal Optical Network Unit Passive Optical Splitter PSTN Internet CATV ONU ONU  PON is a kind of passive optical network featuring one-to-multiple-point architecture;  PON is short for Passive Optical Network ;  PON consists of Optical Line Terminal (OLT), Optical Network Unit (ONU) and Passive Optical Splitter. Passive Optical Splitter
    5. 5. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 5 Why GPON? • GPON ( Gigabit-capable Passive Optical Networks ) • GPON supports Triple - play service, providing competitive all-service solution. • GPON supports high-bandwidth transmission to break down the bandwidth bottleneck of the access over twisted pair cables, so as to satisfy the requirements of high-bandwidth services, such as IPTV and live TV broadcasts. • GPON supports the long-reach (up to 20 km) service coverage to overcome the obstacle of the access technology over twisted pair cables and reduce the network nodes. • With complete standards and high technical requirements, GPON supports integrated services in a good way. • GPON is the choice of large carriers in the international market. <1Mbps 3M 8M 25M 100M ADSL/ADSL2+ Copper Based VDSL / ADSL2+ Copper Based PON Fiber Based 2002 2003 2006 2010 Time BD Internet Video conferencing Remote control Access Technology Service requirement s VoD HDTV Game Live TV VoD HDTV <3km <2km <1km ~5kmCoverage diameter
    6. 6. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 6 Concepts APON: ATM Passive Optical Networks EPON: Ethernet Passive Optical Networks GE-PON: Giga-bit Ethernet Passive Optical Networks GPON: Gigabit-capable Passive Optical Networks
    7. 7. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 7 GPON Principle----Data Multiplexing GPON adopts Wavelength Division Multiplexing (WDM) technology, facilitating bi- direction communication over a single fiber. To separate upstream/downstream signals of multiple users over a single fibre, GPON adopts two multiplexing mechanism: – In downstream direction, data packets are transmitted in a broadcast manner; – In upstream direction, data packets are transmitted in a TDMA manner. 1490nm 1310nm
    8. 8. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 8 GPON Principle----Downstream Data  Broadcast mode
    9. 9. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 9 GPON Principle----Upstream Data  TDMA mode
    10. 10. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 10 GPON EPON Standard ITU.T IEEE Rate 2.488G/1.244G 1.25G/1.25G Split ration 1:64~1:128 1:16~1:32 Data encapsulation mode GEM/ATM Ethernet Broadband efficiency 92% 72% Line encoding NRZ 8B/10B Power budget Class A/B/C Px10/Px20 Ranging Equalized logical reach by adjusting EqD RTT DBA Standard format Defined by vendors TDM support CESoP / Native CESoP ONT interconnectivity OMCI None OAM powerful Weak, extended by vendors Application mode Multi-service/ FTTx Pure data service Maturity Large vendors involved Small vendors involved Choice of carriers Carriers Enterprise Intranet Comparison Between GPON and EPON
    11. 11. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 11 Overview of Optical Access Network This chapter describes the architecture of the optical access network. After reading it, you will have a understanding on the FTTx network. Besides, this chapter describes various devices applied in the FTTx network and you can get a knowledge of those devices applied in the optical access network.
    12. 12. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 12 CO Curb Customer Premise BA FTTC FTTB OLT OLT Architecture of Optical Access Network DSLAM 250-700m Urban Coverage 3.5-5km Remote BusinessxDSL 2~20Mbps OLTFTTH ODN MDU ONT ONU Optical Line Termination Optical Networks Termination Optical Networks Unit Multi-Dwelling Unit 2.5Gbps Down /1.25Gbps Up 2.5Gbps Down /1.25Gbps Up 2.5Gbps Down /1.25Gbps Up
    13. 13. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 13 From the architecture diagram, the optical access network comprises the following scenarios: 1. FTTB scenario As an access scenario for business users, Fiber to The Business (FTTB) scenario falls into single business unit (SBU) and Business Multi-tenant unit (MTU) in terms of capacity. Of them, SBU provides a comparatively small number of ports, including following types: POTS, 10/100/1000BASE-T, RF(33dBmV), and DS1/T1/E1 ports; MTU provides a comparatively larger number of ports, including following types: POTS, 10/100/1000BASE-T, RF and DS1/T1/E1 ports. 2. FTTC & FTTCab scenario As an access to the curb or the cabinet over fibre, Fiber to The Curb& Fiber to The Cabinet (FTTC & FTTCab) scenario is for the Multi-dwelling unit (MDU), providing a comparatively larger number of ports, including following types: 10/100/1000BASE-T, RF(33dBmV), VDSL2, and so on. 3. FTTH scenario As an access to the home over fibre, Fiber to The Home (FTTH ) scenario is mainly for the single family unit (SFU), providing a comparatively small number of ports, including following types: POTS, 10/100/1000BASE-T, and RF(18dBmV). What is Optical Access Network?
    14. 14. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 14 Analysis of GPON Standards This chapter analyses major GPON standards. After reading it, you will have a understanding on the module reference, performance, frame structure, as well as basic terms of GPON network, such as GEM, port and T-CONT.
    15. 15. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 15 ITU-T G.984.3 • Specifications of TC layer in the GPON system • GTC multiplexing architecture and protocol stack • GTC frame • ONU registration and activation • DBA specifications • Alarms and performance ITU-T G-984.1/2/3/4 Simple development process Powerful compatibility ITU-T G.984.1 • Parameter description of GPON network • Requirements of protection switch-over networking GPON Standards ITU-T G.984.4 • OMCI message format • OMCI device management frame • OMCI working principle ITU-T G.984.2 • Specifications of ODN parameters • Specifications of 2.488Gbps downstream optical port • Specifications of 1.244Gbps upstream optical port • Overhead allocation at physical layer
    16. 16. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 16 GPON Network Model Reference WDM ONU/ONT NE WDM OLT NE Service node Optical splitter T reference point V reference point R/S S/RODNUNI SNI IFpon IFpon ONU Optical Network Unit ONT Optical Network Terminal ODN Optical Distribution Network OLT Optical Line Terminal WDM Wavelength Division Multiplex Module NE Network Element SNI Service Node Interface UNI User Network Interface
    17. 17. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 17 Basic Performance Parameters of GPON  GPON identifies 7 transmission speed combination as follows: 0.15552 Gbit/s up, 1.24416 Gbit/s down 0.62208 Gbit/s up, 1.24416 Gbit/s down 1.24416 Gbit/s up, 1.24416 Gbit/s down 0.15552 Gbit/s up, 2.48832 Gbit/s down 0.62208 Gbit/s up, 2.48832 Gbit/s down 1.24416 Gbit/s up, 2.48832 Gbit/s down 2.48832 Gbit/s up, 2.48832 Gbit/s down Among them, 1.24416 Gbit/s up, 2.48832 Gbit/s down is the mainstream speed combination supported at current time.  Maximum logical reach: 60 km  Maximum physical reach: 20 km  Maximum differential fibre distance: 20 km  Split ratio: 1 : 64, it can be up to1 : 128
    18. 18. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 18 GPON Network Protection Mode IFpon IFpon IFpon 1 : N optical splitter OLT ONU#1 ONU#NSecondary fibre Type A Fibre backup IFpon IFpon IFpon 2 : N optical splitterOLT ONU#1 ONU#N Type B OLT interface backup IFpon   No backup on devices.  When the primary fibre fails, the services on the fibre transfers to the secondary fibre.  Service outage occurs, and the outage duration depends on the time of line recovery.  When the disconnection occurs to the line from splitter to ONU, service outage will occur and no backup happens.  OLT provides two GPON interfaces.  This type protects the primary fibre. When the primary fibre fails, the services on the fibre transfers to the secondary fibre.  The protected objects are restricted to the fibre from the OLT to the ONU and boards of the OLT. For faults occur to other parts, no protection is provided. With potential security problems, it cannot satisfies customer’s requirements.  Fault location fails. Protected area Protected area
    19. 19. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 19 IFpon IFpon IFpon 2 : N optical splitter OLT ONU#1 ONU#N Type C All-backup IFpon IFpon IFpon 2 : N optical splitter GPON Network Protection Mode  Both the OLT and the ONT provides two GPON interfaces. GPON interfaces on the OLT work in 1:1 mode.  This type is a kind of whole- network protection. Two routes are provided between OLT and ONU, ensuring recovery of various faults.  When the primary PON port on the ONU or user line fails, ONU automatically transfers services to the secondary PON port. In this way, services goes upstream through the secondary line and secondary port on the OLT. Basically, service outage will not occur.  It is complex to realize it and not cost-effective.  One port stays at idle state all the time, causing low bandwidth utilization.  Whole-network protection
    20. 20. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 20 IFpon IFpon IFpon 2 : N optical splitter OLT ONU#1 ONU#N Type D Mixed backup IFpon IFpon 2 : N optical splitter 1 : 2 optical splitter 1 : 2 optical splitter GPON Network Protection Mode  OLT provides two GPON interfaces. The GPON interfaces work in 1 + 1 mode.  This type is a kind of whole-network protection. Two routes are provided between OLT and ONU, ensuring recovery of various faults, Including faults occurring on optical splitters or the line.  It supports using mixed ONUs in the network: ONUs either with a single PON port or with two PON ports can be used. Users can select them based on the actual needs.  It is complex to realize it and not cost-effective. Whole-network protectionProtected area of ONUs with a single port
    21. 21. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 21 GPON Multiplexing Architecture IFpon O N U O N U O N U T-CONT Port T-CONT Port Port T-CONT T-CONT Port Port Port Port Port ONU-ID identifies ONUs Alloc-IDs identifies T-CONTs Port-ID identifies GEM ports OLT ONT T-CONT T-CONT GEM Port GEM Port  GEM Port: the minimum unit for carrying services.  T-CONT: Transmission Containers is a kind of Buffer that carries services. It is mainly used to transmit upstream data units. T-CONT is introduced to realize the dynamic bandwidth assignment of the upstream bandwidth, so as to enhance the utilization of the line.  IF pon: GPON interface.  Base on the mapping scheme, service traffic is carried to different GEM ports and then to different T-CONTs. The mapping between the GEM port and the T-CONT is flexible. A GEM Port can correspond to a T-CONT; or multiple GEM Ports can correspond to the same T- CONT.  A GPON interface of an ONU contains one or multiple T-CONTs.
    22. 22. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 22 OLT Functional Blocks PON interface function PON interface function PON TC function PON TC function Cross Connection function Service adaptation Service adaptation PON Core Shell Cross Connect Shell Service Shell  PON core shell consists of two parts: PON interface function and PON TC function. PON TC function includes framing, media access control, OAM, DBA, and delineation of Protocol Data Unit (PDU) for the cross connect function, and ONU management. The Cross-connect shell provides a communication path between the PON core shell and the Service shell, as well as cross-connect functionality. Service Shell provides translation between service interfaces and TC frame interface of the PON section.
    23. 23. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 23 ONU/ONT Functional Blocks PON interface function PON interface function PON TC function PON TC function Service adaptation Service adaptation PON Core Shell Service Shell MUX/ DEMUX  The functional building blocks of the G-PON ONU are mostly similar to the functional building blocks of the OLT. Since the ONU operates with only a single PON Interface (or maximum 2 interfaces for protection purposes), the cross- connect function can be omitted. However, instead of this function, service MUX and DMUX function is specified to handle traffic.
    24. 24. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 24 Physical Control Block Downstream(PCBd) Payload AllocID Start End AllocID Start End 1 100 200 2 300 500 T-CONT1 (ONT 1) T-CONT 2 (ONT 2) Slot 100 Slot 200 Slot 300 Slot 500 PLOu PLOAMu PLSu DBRu Payload x DBRu Y Payload y Upstream Bandwidth Map 125us Downstream Framing UpstreamFraming OLT ONT64 ONT1 GPON Frame Structure • Please refer tothe remarks
    25. 25. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 25 PLOu PLOAMu PLSu DBRu x Payload x DBRu y Payload y PLOu DBRu z Payload z Preamble A bytes Delimiter Bbytes BIP 1 bytes ONU-ID 1 bytes Ind 1 bytes ONU ID Msg ID 1 bytes Message 10 bytes CRC 1 bytes DBA 1,2,4bytes CRC 1 bytes DBA Report Pad if needed GEM header Frame fragment GEM header Full frame GEM header Frame fragment PLI Port ID PTI HEC ONT A ONT B UpstreamFraming GPON Upstream Frame Structure • Please refer tothe remarks
    26. 26. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 26 PCBd n Payload n PCBd n + 1 Payload n Psync 4 bytes Ident 4 bytes Reserved 13 bytes BIP 1 bytes Plend 4 bytes Plend 4 bytes US BWMap N* 8 bytes FEC Ind 1 bit Reserved 1 bit Super-frame Counter30 bits Blen BWMap Length 12 bits Alen ATMPartition Length 12 bits CRC 8 bits Access 1 8 bytes Access 2 8 bytes ….. Access n 8 bytes Alloc ID 12 bits Flags 12 bits SStart 2 bytes SStop 2 bytes CRC 1 byte Send PLS 1 bit Send PLOAMn 1 bit Use FEC 1 bit Send DBRu 2 bits Reserved 7 bits 125us Coverage of this BIP Coverage of next BIP Downstream Framing GPON Downstream Frame Structure • Please refer tothe remarks
    27. 27. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 27 TDM TDM data Payload TDM fragment HEC PTI Port ID PLI GEM Frame Ingress buffer TDM Buffer Mapping of TDM Service in GPON  TDM frames are buffered and queued as they arrive, then TDM data is multiplexed in to fixed-length GEM frames for transmission.  This scheme does not vary TDM services but transmit TDM services transparently.  Featuring fixed length, GEM frames benefits the transmission of TDM services .
    28. 28. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 28 GEM Payload CRC PTI Port ID PLI GEM FrameEthernet Packet DA SFD Preamble Inter packet gap SA LengthType MAC client data FEC EOF 5 bytes Mapping of Ethernet Service in GPON  GPON system resolves Ethernet frames and then directly maps the data of frames into the GEM Payload.  GEM frames automatically encapsulate header information.  Mapping format is clear and it is easy for devices to support this mapping. It also boasts good compatibility.
    29. 29. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 29 GPON Key Technologies This chapter describes GPON key technologies. After reading it, you will have a understanding on key technologies of GPON, such as ranging, equalization delay (EqD), dynamic bandwidth assignment (DBA), QoS and optical power.
    30. 30. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 30 GPON Key Technologies---- Burst Optical/Electric Technology Continuous transmitting units Burst transmitting units  Fast-enable and disable ability  Split ratio (>10dB) 0# ONT 0# ONU 1# ONU 0# ONU 1# ONU 0# ONT 0# ONU 1# ONU 0# ONT Fast AGC receiving Non- fast AGC receiving Threshold line Data recovered Signals arrive at OLT and threshold is specified Signals sent from ONT/ONU Burst receiving units Continuous transmitting units
    31. 31. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 31 GPON Key Technologies----Ranging OLT ONU in Ranging state StartofD/SFrame ReceptionofD/SFrame TransmissionofS/NResponse ActualReception ofS/NResonse DesiredStartof U/SFrame Assigned EqD Pre-Assigned EqD 'Zero Distance' EqD DesiredReception ofSNResponse Sstart U/S BW Map containing Ranging Request ONU Response Time Pre-Assigned EqD Sstart StartofU/SFrame forPre-rangedONU ONU3 ONU2 ONU1 OLT  OLT obtains the Round Trip Delay (RTD) through ranging process, then specifies suitable Equalization Delay (EqD) so as to avoid occurrence of collision on optical splitters.  To acquire the serial number and ranging, OLT needs open a window, that is, Quiet Zone, and pauses upstream transmitting channels on other ONUs.
    32. 32. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 32 DBA What is DBA? --- DBA, Dynamic Bandwidth Assignment --- DBA is a scheme facilitating dynamic bandwidth assignment at an interval of ns and us. Why DBA? --- It enhances the uplink bandwidth utilization of PON ports. --- More users can be added on a PON port. --- Users can enjoy higher-bandwidth services, especially those requiring comparatively greater change in terms of the bandwidth.
    33. 33. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 33 DBA Working Principle  Based on service priorities, the system sets SLA for each ONU, restricting service bandwidth.  The maximum bandwidth and the minimum bandwidth pose limits to the bandwidth of each ONU, ensuring various bandwidth for services of different priorities. In general, voice service enjoys the highest, then video service and data service the lowest in terms of service priority.  OLT grants bandwidth based on services, SLA and the actual condition of the ONU. Services of higher priority enjoy higher bandwidth. SLA: Service - Level Agreement BW: Bandwidth Maximum: maximum bandwidth Guaranteed: guaranteed bandwidth Minimum: minimum bandwidth
    34. 34. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 34 T-CONT Bandwidth Terms  Transmission Containers (T-CONTs): it dynamically receive grants delivered by OLT. T-CONTs are used for the management of upstream bandwidth allocation in the PON section of the Transmission Convergence layer. T-CONTs are primarily used to improve the upstream bandwidth use on the PON.  T-CONT type falls into FB, AB, NAB, and BE.  Five T-CONT types: Type1, Type2, Type3, Type4, and Type5.
    35. 35. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 35 Relationship Between T-CONT Type and Bandwidth Type  Type1 T-CONT is of the fixed bandwidth type and mainly used for services sensitive to delay and services of higher priorities, such as voice services.  Type2 and type3 T-CONT is of the guaranteed bandwidth type and mainly used for video services and data services of higher priorities.  Type4 is of the best-effort type and mainly used for data services (such as Internet and email), and services of lower priorities. These services do not require high bandwidth.  Type5 is of the mixed T-CONT type, involving all bandwidth types and bearing all services.
    36. 36. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 36 DBA Operation Modes on ONU ( a ) There are four T-CONT types on ONUs ( b ) There is only Type5 T-CONT on ONUs  Based on T-CONT types, there are two modes in DBA operations.  In mode (a), services are mapped into different T-CONT queues, and then ONU schedules and outputs the data waiting in queues based on the OLT grants.  In mode (b), all services are mapped into type5 queues, and type5 contains four types of sub-queues. Then, ONU ONU schedules and outputs the data waiting in queues based on the OLT grants.
    37. 37. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 37 DBA Operation Process  DBA block in the OLT constantly collects information from DBA reports, and sends the algorithm result in the form of BW Map to ONUs .  Based on the BW Map, each ONU sends upstream burst data on time slots specified to themselves and utilizes the upstream bandwidth. DBA algorithm logic DBA report BWMap Time slot T-CONT T-CONT T-CONT Scheduler ONUOLT Co ntro l platfo rm Data platfo rm
    38. 38. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 38 Two DBA Operation Modes  SR(Status Reporting )-DBA PayloadUS BW Map Data Report PCBd D/S Direction U/S Direction OLT ONT ① ② ③ ④  Based on the algorithm result of last time, OLT delivers BW Maps in the header of downstream frames.  Based on the bandwidth allocation information, ONU sends the status report of data currently waiting in T-CONTs in the specified time slots.  OLT receives the status report from the ONU, updates BW Map through DBA algorithm and the delivers the new BW Map in the next frame.  ONU receives the BW Map from the OLT and sends data in the specified time slots.
    39. 39. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 39 NSR-DBA Operation NSR is an algorithm scheme that realizes DBA. It helps to predict the bandwidth allocated to each ONU based on the traffic from ONUs. Procedure: Step1: Monitor the number of cells received by OLT within the specified interval. Step2: Use the result of real time monitoring in step 1 to calculate the utilization rate. Step3: Recognize the congestion status by comparing the utilization rate with the specified limits. D ti j Di Dj  NSR (Non Status Reporting)-DBA
    40. 40. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 40 QoS Mechanism of ONU in GPON GPON VOIP VOD DATA TDM Traffic-flow Scheduling And buffer control Service differentia based on 802.1p GPON VOIP VOD DATA TDM Traffic-flow Scheduling And buffer control Service differentia based on 802.1p OLT Splitter Service traffic based on GEM Port-id  Traffic classification of services based on LAN/802.1p.  Service scheduling based on the combination of strict priority (SP) and Weighted Round Robin (WRR) algorithms.  Service transmission based on service mapping with different T-CONTs, enhancing line utilization and reliability.
    41. 41. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 41 QoS Mechanism of OLT in GPON VOIP BTV DATA TDM GPON GPON GE/10GE Upstream service traffic based on different VLANs Ethernet bridging Non- blocking switching 802.1p COS Queuing & scheduling DBA TDM Gateway PSTN BSR OLT  Traffic classification based on VLAN/802.1p.  Service scheduling based on combination of strict priority (SP) and Weighted Round Robin (WRR) algorithms.  DBA algorithm, enhancing uplink bandwidth utilization.  Access control list (ACL)-based access control on layers above layer-2.
    42. 42. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 42 AES Encryption in GPON End UserEnd User 11 End UserEnd User 11 End UserEnd User 33 End UserEnd User 33 ONT End UserEnd User 22 End UserEnd User 22 33 33 11 33 33 22 11 11 11 11 22 ONT ONT 11 33 33 22 11 11 11 33 3322 11 11 OLT Encryption Decryption Decryption Decryption 11 11 33 3322 11 11  OLT applies Advanced Encryption Standard (AES) 128 encryption.  GPON supports encrypted transmission in downstream direction, such as AES128 encryption.  In the case of GEM fragments, only the payload will be encrypted.  GPON system initiates AES key exchange and switch-over periodically, improving the reliability of the line. AES: Advanced Encrypt System A globally-used encryption algorithm
    43. 43. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 43 FEC D a t a b y t e s P C B d Parity C o d e w o r d 9 7 2 0 T S s P C B d P a y l o a d ( D a t a b y t e s ) D a t a b y t e s o f c o d e w o r d # 1 9 1 0 8 T S s S h o r t c o d e w o r d D a t a b y t e s Parity C o d e w o r d D a t a b y t e s o f c o d e w o r d # 2 D a t a b y t e s Parity C o d e w o r d D a t a b y t e s o f c o d e w o r d # 3 D a t a b y t e s Parity C o d e w o r d D a t a b y t e s o f c o d e w o r d # 4 D a t a b y t e s Parity C o d e w o r d D a t a b y t e s o f c o d e w o r d # 5 D a t a b y t e s Parity C o d e w o r d D a t a b y t e s o f c o d e w o r d # 6 Parity D a ta b y t e s  FEC is Forward Error Correction.  It is a algorithm based on Reed-Solomon, a Block based code. FEC code comprises fixed- length data block and redundancy bits.  Applying FEC algorithm on the transmission layer, GPON will drop the error bit rate of the line transmission to 10-15, and avoid retransmission of data.  GPON supports FEC in the downstream direction.  Processing of PCBd and Payload improves the transmission quality.
    44. 44. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 44 Power attenuation calculation of Optical splitter Input attenuation of optical splitter(<1dB): ∑(Power_input) - ∑(Power_output of all branch) Optical Power Attenuation Input Output1:2 optical splitter 2:N optical splitter ∵ 10 log(0.5) = - 3.01 ∴ Attenuation of 1:2 splitter: 3.01 dB Attenuation of 1:16 splitter: 12.04 dB Attenuation of 1:64 splitter :18.06 dB Input Output
    45. 45. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 45 Fibre Attenuation and Power Budget Fibre attenuation relates to the fibre length The attenuation of fibre splicing point is generally less than 0.2dB Other factors may cause attenuation, such as fibre bending About 0.35 dB per km for 1310,1490nm Table G.984.2 – Classes for optical path loss Class A Class B Class B + Class C Minimum loss 5 dB 10 dB 13 dB 15 dB Maximum loss 20 dB 25 dB 28 dB 30 dB NOTE – The requirements of a particular class may be more stringent for one system type than for another, e.g. the class C attenuation range is inherently more stringent for TCM systems due to the use of a 1:2 splitter/combiner at each side of the ODN, each having a loss of about 3 dB. Huawei’s OLT and ONU 28 dB (Class B+)
    46. 46. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 46 Items Unit Single fibre OLT: OLT •Mean launched power MIN dBm +1.5 •Mean launched power MAX dBm +5 •Minimum sensitivity dBm -28 •Minimum overload dBm -8 •Downstream optical penalty dB 0.5 ONU: ONU •Mean launched power MIN dBm 0.5 •Mean launched power MAX dBm +5 •Minimum sensitivity dBm -27 •Minimum overload dBm -8 •Upstream optical penalty dB 0.5 Parameters of GPON Interfaces (Class B+)
    47. 47. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 47 GPON Management and Service Provisioning This chapter describes GPON management and service provisioning. After reading it, you will have a understanding on OMCI (the management and maintenance message type) and ONT service implementation.
    48. 48. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 48 OAM message at the physical layer falls into three types: embedded OAM, PLOAM and OMCI . Basic Message Types in GPON Management The embedded OAM and PLOAM channels manage the functions of the PMD and the GTC layers. The OMCI provides a uniform system of managing higher (service defining) layers. The embedded OAM channel is provided by field-formatted information (such as BW Map , DBRu) in the header of the GTC frame. The functions that use this channel include: bandwidth granting, Dynamic Bandwidth Assignment signalling and so on. The OMCI channel is used to manage the service defining layers that lay above the GTC.
    49. 49. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 49 OLT BRASONT GPON System Management Mode iManager N2000 BMS OMCI SNMP ACS TR069  ONT Plug and Play  Zero configuration  ONT Centered Management  ONT remote diagnosis  Remote ONT maintenance and management through OMCI  Auto configuration and management on ONT through TR069  ONT Auto Service Provisioning Client
    50. 50. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 50 GPON Service Provisioning and Zero Configuration on Terminals Carriers’ nightmare Application scenario Service Provisioning NMS 2000 Access Network Billing 1 Subscribe for services 2 Configure service network 3 Order Management Start up ONT and make registration with serial number ONTONT ONT ONT CRM User Send terminals to users 1 2 Finish the auto-configuration of OLT Initial configurations (such as service system information configuration, data configuration) are required on terminals and then they can be put into use. To finish these configurations, it is not cost-effective to carriers. GPON supports zero configuration on terminals and plug-and-play of terminals, which is cost-effective. Flexible Configuration plan of GPON STB 3 Use OMCI to finishing data configuration on ONT
    51. 51. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 51 VOIP Service Management Solution in GPON SoftX3000 Service Provisioning IADMS Access Network CRM Billing UMS 1Subscribe for services 2 Configure SoftX3 Configure IADMS Activation code generator 4Generating activation code User 5 Send activation code and terminal to users Phone Phone Phone Phone Order Management 6 Input activation code 7 Configure terminals automaticallythroughTR069 Maintenance personnel use activation code generator to generate terminal activation code (including IADMS IP, PPPoE user name and password). Users input activation code on terminals, terminals register on IADMS upon power-up and the IADMS makes auto-configuration on terminals. Basic operation and maintenance processDescription Process and Networking ONT ONT Serviceprovisioning Terminalactivation Dailymanagement
    52. 52. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 52 Basic Services over GPON Network This chapter describes basic services provided by GPON System, such as Triple-play, TDM and RF overlay services.
    53. 53. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 53 BRAS AAA Server IP Core ASP/ISPCPE MSE Ethernet OLT Softswitch Intern et VoD ServerMiddle ware NMS TL1/CORBA /API BB service platform Carrier’s OSS Notification Triple Play Solution in GPON IPTV Phone PC SFU Phone PC SBU CPE MDUVDSL NSP IP Voice CBU E1 FE ODN Splitter Base station
    54. 54. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 54 TDM Service Solution in GPON ONT OLT CO LESplitter ONT BUSINESS PBX PBX E1/T1 ODN E1/T1 E1/T1 FE PSTN CESoP mode Native mode  With guaranteed QoS, GPON ensures the parameter indexes of TDM service, such as end-to-end delay, Jitter and error bit rate.  GPON supports effective isolation and higher-priority processing of TDAM service.  OLT supports processing TDM service in Native and CESoP modes.  With fixed upstream/downstream frame structure, periodic multiframes are transmitted in GPON line. So, GPON can transmit TDM service with first-born advantage. ONT
    55. 55. HUAWEITECHNOLOGIES CO., LTD. Huawei Confidential Page 55 RF Overlay Service Solution in GPON EDFA ( Erbium Doped Fiber Amplifier ) Optical Couplers ( WDM ) OLT (Optical Line Terminal) ONU (Optical Network Terminal) Central Office Video 1550nm Voice/Data& Video 1490/1310nm , 1550n m Voice/Data Downstream 1490nm Upstream 1490nm Customer Premises Optical Splitter Video ( RF ) IP Voice and Data @1250Mbps Voice and Data @2500Mbps Video Analog TV Digital TV HD/VOD 42Mhz 550Mhz 860Mhz Upstream Downstream 1310nm 1490nm 1550nm
    56. 56. Thank You www.huawei.com

    ×