ComGen CPnet presentation

1,679 views

Published on

Published in: Technology, Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
1,679
On SlideShare
0
From Embeds
0
Number of Embeds
1,365
Actions
Shares
0
Downloads
1
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

ComGen CPnet presentation

  1. 1. Low Cost Equipment Monitoring<br />For use with remotely located field compressors, power generators, artificial lift systems, and other equipment types.<br />A low cost monitoring solution will allow the owner of these types of equipment to gather the operating conditions from a central location.<br />The result is a more efficient use of equipment.<br />Accurate measurement<br />Copyright ComGen Power Solutions Ltd. 2011<br />
  2. 2. Device Description<br />Remote monitoring device using AFTI Sentry end-to-end architecture.<br />Unlimited web access from any location.<br />Globalstar Satellite Network<br />6 process inputs per location<br />3 pressure e.g. Engine oil pressure (callout), suction and discharge<br />3 temperature e.g. Engine jacket water temp, + 2 process temps<br />Copyright ComGen Power Solutions Ltd. 2011<br />
  3. 3. CP-Net: Data From Any Location<br />Copyright ComGen Power Solutions Ltd. 2011<br />
  4. 4. Real-time Data = Increased Run Time<br />Alarming on Shutdown<br />Permits Proactive Response<br />Copyright ComGen Power Solutions Ltd. 2011<br />
  5. 5. Event Sequence<br />Equipment data is gathered at one minute intervals and compressed into hourly averages.<br />These readings are transmitted automatically every four hours through the Globalstar Satellite Network.<br />The information is received at the AFTI Sentry website where the data is translated and formatted.<br />Equipment owners can log on from any computer that has internet capabilities (including handhelds) and view the data. <br />Copyright ComGen Power Solutions Ltd. 2011<br />
  6. 6. Callouts<br />Callouts are generated by a device alarm built into the hardware at each location.<br />Typically this is connected to the engine oil pressure with a set point that indicates the engine status.<br />When the engine stops running, the CP-Net sends an instantaneous message.<br />The message is distributed to the equipment operator.<br />Copyright ComGen Power Solutions Ltd. 2011<br />
  7. 7. Value<br />Fewer site visits increases operator efficiency and reduces environmental impact.<br />Callout system reduces costly downtime.<br />Receive accurate vital equipment data<br />Frequent updates on running conditions will result in improved equipment function and optimization (historical data).<br />Equipment uptime tracking<br />Remote monitoring will provide info when attempting to solve problems with equipment function (increased uptime). <br />Copyright ComGen Power Solutions Ltd. 2011<br />

×