Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.
Final Year B.Tech. (Mechanical)                        CAD/CAM -Assignment No.5 &6                         Submission date...
21-405.   Write manual part program for the component shown in fig.1.        Tools used – 1) Rough turning (max. depth of ...
Data for milling    Work material Hardness             HSS             Carbide                     BHN         Speed Feed ...
41-609. Write manual part program for the component shown in fig.3Raw material – 3” x 3.5” x ½ “ AluminiumTools – 1) End m...
10. Write manual part program for the component shown in Fig.4.Tools used – 1) Rough turning (max. depth of cut = 1 mm)   ...
Data for millingWork material Hardness            HSS              Carbide                 BHN         Speed Feed        S...
61-8013. Write a subroutine for drilling any number of holes along a circle (Fig.7) The    inputs are the following:    # ...
2.0                                                    1.0         1.0                                                    ...
Upcoming SlideShare
Loading in …5
×

Assignments cnc programming

3,855 views

Published on

Published in: Business, Technology
  • Want to preview some of our plans? You can get 50 Woodworking Plans and a 440-Page "The Art of Woodworking" Book... Absolutely FREE ★★★ http://tinyurl.com/yy9yh8fu
       Reply 
    Are you sure you want to  Yes  No
    Your message goes here
  • Be the first to like this

Assignments cnc programming

  1. 1. Final Year B.Tech. (Mechanical) CAD/CAM -Assignment No.5 &6 Submission date – 10-4-2012 1-201. Interpret the following NC program block by block. Plot the complete tool center path with the corresponding coordinates. Mark the corresponding NC blocks on tool path segment.N01 G90 N11 G03 X180 Y122.5 I-57.5N02 G71 N12 G01 X107.5N03 G92 X-12.5 Y-12.5 Z50 N13 Y110N04 G00 Z2.5 M03 S800 N14 G0-2 X80 Y82.5 I-27.5N05 G01 Z-7.5 F25 M08 N15 G01 X40N06 X162.5 F125 N16 G03 X-12.5 Y30 J-52.5N07 Y0 N17 G01 Y-12.5N08 G02 X220 Y57.5 I57.5 N18 Z3.8N09 G01 X232.5 N19 G00 Z50 M09 M05N10 Y70 N20 M302. For the component shown in fig., write manual part program. (P.N.Rao page 363, Fig.13.41) Material- C 20 steel Milling cutter – φ20 mm3. For the component shown in fig., write APT program. (P.N.Rao page 495, Fig.16.80) Material- C 20 steel (12 mm thick) Milling cutter – φ20 mm Data for milling Work material Hardness HSS BHN Speed Feed m/min mm/rev C20 steel 110-160 20 0.13 Data for drilling Work material Hardness HSS BHN Speed Feed m/min mm/rev C20 steel 110-160 35 0.2-0.54. Write APT program for the component shown in fig. with the same data. (P.N.Rao page 493, Fig.16.77)
  2. 2. 21-405. Write manual part program for the component shown in fig.1. Tools used – 1) Rough turning (max. depth of cut = 0.1”) 2) Finish turning ( max. depth of cut = 0.02”) Data for turningWork material Hardness HSS Carbide BHN Speed Feed Speed Feed m/min mm/rev m/min mm/revAluminium 70-105 120 0.28 240 0.25 Fig.16. For the component shown in fig.2 (thickness = 0.4 inch), write manual part program. Dimensions are in inches. Material- C80 steel Tool – End mill 20 mm diameter
  3. 3. Data for milling Work material Hardness HSS Carbide BHN Speed Feed Speed Feed m/min mm/rev m/min mm/rev C80 steel 170-200 26 0.3 130 0.3Select the cutter material and calculate spindle speed and feed. 5 ” 1 ” 2.5 5 ” ” 4 (4, ” 4) Program Zero 4 ” Fig.27. Write APT program for the same component (Fig.2) with the same data.8. Write APT program for the component shown in fig. (P.N.Rao page 364, Fig.13.43) Material- C35 steel Tool – End mill φ10 mm Select the cutter material and calculate spindle speed and feed. Data for milling Work material Hardness HSS Carbide BHN Speed Feed Speed Feed m/min mm/rev m/min mm/rev C35 steel 120-180 25 0.13 80 0.18
  4. 4. 41-609. Write manual part program for the component shown in fig.3Raw material – 3” x 3.5” x ½ “ AluminiumTools – 1) End mill 1/4” 2) Drill 1/8” Data for milling Work material Hardness HSS Carbide BHN Speed Feed Speed Feed m/min mm/rev m/min mm/rev Aluminium 70-105 120 0.28 240 0.25 Data for drilling Work material Hardness HSS BHN Speed Feed m/min mm/rev Aluminium 70-105 275 0.13-0.90 Fig.3
  5. 5. 10. Write manual part program for the component shown in Fig.4.Tools used – 1) Rough turning (max. depth of cut = 1 mm) 2) Finish turning ( max. depth of cut = 0.5 mm) Data for turningWork material Hardness HSS Carbide BHN Speed Feed Speed Feed m/min mm/rev m/min mm/revC 20 steel 110-160 40 0.3 150 0.38 Fig.411. Write APT program for the component shown in fig. 5 using PATERN, MATRIX,TRACUT. Fig.512. For the component shown in fig.6 (thickness = 10 mm), write APT program Material- C35 steel Tool – End mill φ20 mm
  6. 6. Data for millingWork material Hardness HSS Carbide BHN Speed Feed Speed Feed m/min mm/rev m/min mm/revC35 steel 120-180 25 0.13 80 0.18Select the cutter material and calculate spindle speed and feed. 45 15 R15 R10 15 50 50 15 R15 15 45 Fig.6
  7. 7. 61-8013. Write a subroutine for drilling any number of holes along a circle (Fig.7) The inputs are the following: # 1 = X coordinate of the center of the circle # 2 = Y coordinate of the center of the circle # 3 = Diameter of the circle # 4 = Total depth through which the hole making operation is to be done # 5 = Total number of points # 6 = Actual canned cycle to be used (81,82,84,85,86) # 8 = Height of the rapid plane in Z coordinate # 9 = The feed rate to be used Write statements in the main program to drill and Counterbore holes for the component shown in fig.7. Fig.7 Fig.814. Write manual part program for the component shown in Fig.8. Raw material – Diameter 40 mm Tools used – 1) Facing (T01) 2) Rough turning (T02) - max. depth of cut = 2.5 mm 2) Finish turning (T03) - max. depth of cut = 1 mm Data for turningWork material Hardness HSS Carbide BHN Speed Feed Speed Feed m/min mm/rev m/min mm/revCopper Alloy 120-160 200 0.25 300 0.2515. Write APT program for machining the step of the component shown in fig. 9. (Dimensions are in inches) Tool (1’’ end mill) Speed – 305 rpm Feed – 1.2 inch/min
  8. 8. 2.0 1.0 1.0 0.2 R 0.4 3.0 2.6 0.2 0.2 0.2 4.0 Program Zero 0.2 1.0 Fig.916. Write APT program for machining the component shown in fig. 10.

×