1. zr@
fnterferential IF-8100
Clinician Controls
Operating NIode
(amplitude greater than zero)
Safety Features
The device locks after 20 seconds to prevent
Turns unit ON
accidental increase in amplitude.
Increases amplitude
Decreases amplitude
"Check Electrode" in display indicates an
electrode or lead problem. The unit will not
work until corrected
(Screen changes back
Turns unit OFF (hold down)
Unlocks controls (press down once)
Programming Mode
to "default screen" after
Push Prog. Button to
move to next screen
20 seconds of
inactivity. No programming lost)
+-
Push Up and Down arrows to
change the value on the Screen
_>
Displav Screen
@
Default Screen - Press Prt.;g. Lrutton tr)
sral.r progr.arnrnine
Y
The IF llcquency is swcepin-u bctwecn
I Hz and l0 Hz over a period of l5
The IF fi'equency is su'eeping between
I Hz and l50Hzover
a period
seconds conlinuously.
of l5
secon6s continuously
The IF frequency is sweeping between 80 Hz and 150 Hz. over a period
o1'l5 seconds continuously.
The stimulation is delivered at 50 Hz, On 6 Seconds. Ofl 6 seconds,
ramp up is 1.0 sccond. ramp down
is 0.5 second.
The Combo Mode utilizes: Low Mode (2 min). High Mode (2 min).
and Muscle Mode (2 min) repears
tbr duration of treatment.
@
Adjust Timer (default is 20 min, adjustable
ran-ee:
l0 min 90 min, or "Cont." = conSranr)
Ef
Press
E@
The device should now be at the "Default screen', and ready to start
treatment
V
f
arrow to
see
patient usage. To rdset press
V
* Please
see other side
for a more detailed description of each pre-programmed mode
f
I
I
.m#[E"

2. o
o
a
o
o
o
LOW
MODE
UNIQUE FEATURES
The 5 pre-programmed modes allow for a wide range of treatment options
The IF8100 is ideal for quick patient set-up and increased patient compliance
The digital display and easy push button controls makes the IF8100 easy to use
The IF8100 offers Interferential, Neuromuscular stimulation or both
The built in compliance meter tracks patient usage time and number of times used
The programmable treatment timer automatically shuts device off aftei preset time
The IF frequency is sweeping between
a period of l5 seconds continuously.
l{l Hz
,""
LOW-HIGH
MODE
+
15
I Hz and 10 Hz over
l0 Hz
Seconds#
15
LOW MODE BENEFITS
l-10 Hz sweep induces beta-endorphin
l(l Hz
Seconds#
release fbr longer carryover of pain
rt,
15
Seconds-1|
The IF liequency is sweeping between I Hz and 150 Hz
over a period of l5 seconds continuously
LOW-HIGH MODE BENEFITS
a
a
+
HIGH
MODE
I
-+-
5 Seconds
----F_
|
5 Seconds
__f)lH7
| -5
Seconds
-----{-
I
5 Seconds
-----f----
15 Seconds
MODE BENEFITS
Sweeping higher late produce taster pain
relief via gate control
High fiequency sweep makes stimulation
more comtbrtable
-----f}
The stimulation is delivered at 50 Hz, On 6 Seconds, Olf 6
seconds, ramp up is 1.0 second, ramp down is 0.5 second.
MUSCLE MODE BENEFITS
a
a
a
6 Sec On
COMBO
MODE
Offers a full sweep o1'I Hz to 150 Hz
Full sweep allows fbr beta endorphin
releasc and gate control pain relief
The IF frequency is sweeping between 80 Hz and 150 Hz
over a period of l5 seconds continuousl
F-MUSCLE
MODE
l-5 Seconds
-----F
6 Sec
Off
relief
Sweeping fiequency is more comfbrtable
when treatine sensitive areas
Muscle re-education
Prevention or retardation of disuse arrophy
Maintaining or increasing ROM
6 Sec On
The Combo Mode utilizes: Low Mode (2 min), High Mode
(2 min), and Muscle Mode (2 min) for duration of treatment.
COMBO MODE BENEFITS
Endorphin release, -gate control pain relief,
and spasm reduction in one convenient
setting
F,":l*."ii: ,: :?l;1".
--+,"1i"11,'i;li
o'jr''Ii, r
u *'i? l;".. -+: ;1;;,*
9990 Park Meadows Drive, Lone Tree CO
phnne:,$00r{qs-66,0
80124
-l''
C$RRSIEO
i".,,sooiro-"risi- -
www.zynexmed.com
-c-6{iE'RhGE-
Representative:

3. l
Interferential IF-8100
Patient Operating Instructions
Operating Mode
To start your treatment this window must show El4glgryi4lgg-and
amplitude level. If anlthing else is showing, wait 20 seconds and the
window will return to the operating mode
Start Treatment
1.
2.
Press once to turn unit ON
Keep pressin-e to desired stimulation
level
Do not push the Pros. Button. Your
therapist has already set this unit to the
proper mode of operation. If you push
the Prog. Button by mistake, wait 20
seconds and the unit will return to the
opelating mode.
End Treatment
L
Unit will end treatment based on set
timer - turns off automatically
2.
OR
Press and hold to end treatmcnt
Unlock Controls
L
Press once to unlock controls - see
"Sal'ety Features" below for more
inforrration
r
The buttons on the unil lock after 20 seconds of inactivity. this will prevent an accidental increase o1'amplitude. To unlock
buttons. press the down button once. You can now increase the amplitude.
.
Display reads "check electrode". this means that an electrode or lead wire is not attached properll,. Check that all electr-odes
and lead wires are attached and try to increase your amplitude again.
Home Device Settings
nlmml
Mode:
nffimtrml
Timer:
Minutes
Treatments:
trlmffil nmml
Per day
For questions regarding your Zynex Medical device or to order supplies, please use the following information:
address: plot no: 6, GreenZynex l{edical, Inc
Avenues, Opp: Bhavyas Anandham, Nizampet road
Address : Plot no : 06, Green Avenues, Opp: 9990 Padi l',4eadows Dri.,,eNijampet road, Kukatpally, Hyderabad - 500090
Bhavyas Anandham,
kukatpally, Hyderabad - 500090
E-mail Id info@painezee.com CO 80124: 0091- 9030022402
Lone Tree. Mobile:
E-mail : : info@painezee.com Mobile 0091- 9030022402
Phone: -800-495-6670
1
Fax: l-800-495-6695
^6ODAYSGUARIffTEED