ADK obd2tuning technology CO.,LTD
Web: www.obd2tuning.com
Skype: ADKobdtools

Install Instruction of vag com vcds usb driv...
Vag com vcds usb driver windows XP system Install
Instruction:

Notes: Vag com should install the drivers automatically. T...
similar, but not necessarily identical.

1. Make sure you have already downloaded and installed vag
com on your PC before ...
Interface should be under Universal Serial Bus (USB)
Controllers or under Other Devices. If it's there, Right-Click it
and...
7. On the screen above:
Select "Search for the best driver in these locations"
Check "Include this location in the search:...
9. Click the [Next >] button.

10. If you get a Windows message stating "This hardware will
not be installed. Contact your...
an action."

D) Next, repeat the driver installation starting in Step 3.

11. The following dialog should appear:

This di...
13. Click the [Finish] button to complete the installation.

14. Start VCDS.
Click the [Options] button.
In the "Select CO...
15. Click [OK] and click [Save]

16. Go test it on a car.
15. Click [OK] and click [Save]

16. Go test it on a car.
Upcoming SlideShare
Loading in …5
×

Install Instruction of vag com vcds usb driver windows XP system

254 views

Published on

Vag com vcds is powerful vag group diagnose interface. Some customers feedback they do not know how to install vag com usb driver. Below OBD2Tuning sharing Install Instruction of vag com vcds usb driver windows XP system.

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
254
On SlideShare
0
From Embeds
0
Number of Embeds
3
Actions
Shares
0
Downloads
4
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Install Instruction of vag com vcds usb driver windows XP system

  1. 1. ADK obd2tuning technology CO.,LTD Web: www.obd2tuning.com Skype: ADKobdtools Install Instruction of vag com vcds usb driver windows XP system Vag com vcds is powerful vag group diagnose interface. Some customers feedback they do not know how to install vag com usb driver. Below OBD2Tuning sharing Install Instruction of vag com vcds usb driver windows XP system. Vcds vag 12.12 interface Vag com 12.12 VCDS 12.12 never locked
  2. 2. Vag com vcds usb driver windows XP system Install Instruction: Notes: Vag com should install the drivers automatically. These instructions are only to be used in case the automatic driver installation is not successful. These instructions are for Windows XP. Installation under Windows 98/ME/2000 is
  3. 3. similar, but not necessarily identical. 1. Make sure you have already downloaded and installed vag com on your PC before following these instructions. If you haven't yet downloaded vag com, you can find the free download link on OBD2Repair news with title " where to get vag com software for free " 2. Allow the software you just downloaded to install itself on your PC. If you choose to install it someplace other than the default location, make a note of folder you're installing it to. 3. Plug your Ross-Tech USB Interface to your PC's USB port (It is not necessary to connect the interface to a car yet). A message should appear on your PC's Taskbar: " Found New Hardware Ross-Tech HEX or KEY USB Interface " NOTE: If the new Hardware Found Wizard popup does not appear when you plug in your interface, go into Device Manager and look for the interface. In Windows XP, you can typically find the Device Manager by RIGHT-CLICKING on My Computer then selecting Manage. Your Ross-Tech USB
  4. 4. Interface should be under Universal Serial Bus (USB) Controllers or under Other Devices. If it's there, Right-Click it and then select Update Driver. Then you can start at Step 4 in the instructions below. 4. The New Hardware Found Wizard should appear: 5. On the screen above, select "Install from a list or specific location (Advanced)" then click the [Next >] button. 6. The following dialog should appear:
  5. 5. 7. On the screen above: Select "Search for the best driver in these locations" Check "Include this location in the search:" Use the [Browse] button to find the VCDS folder (Usually C:ross-techVCDS unless you chose a different folder when you installed the software) Click [OK] 8. The following dialog should appear:
  6. 6. 9. Click the [Next >] button. 10. If you get a Windows message stating "This hardware will not be installed. Contact your system administrator" then you need to do the following A) Login to Windows with Administrator rights. B) Go into Start -> Settings -> Control Panel -> System -> Hardware -> Driver Signing C) Select Warn and choose "Prompt me each time to choose
  7. 7. an action." D) Next, repeat the driver installation starting in Step 3. 11. The following dialog should appear: This dialog warns you that we haven't paid Microsoft a pound of flesh to certify the driver. You're going to have to click the [Continue Anyway] button..:-) Note: If your Windows Security Settings policy is "undefined' you may need to set it to "warn" to be able to continue. 12. The following dialog should appear:
  8. 8. 13. Click the [Finish] button to complete the installation. 14. Start VCDS. Click the [Options] button. In the "Select COM Port" box, select USB. Click the [Test] button. The results should look like this (it may have additional information in the Port Test dialog).
  9. 9. 15. Click [OK] and click [Save] 16. Go test it on a car.
  10. 10. 15. Click [OK] and click [Save] 16. Go test it on a car.

×