How to fix China vag com VCDS diagnsotic interface FT232R chip protection2

2,169 views

Published on

Already bought VCDS VAG 11.11 or vag com 11.8 diagnostic interface. You may meet problem--error: does not work , (not plugged into car message / interface worx) and cant update it to Vag com 12.10.3. Below OBD2Tuning sharing How to fix China vag com VCDS diagnsotic interface FT232R chip protection.

Published in: Automotive, Technology, Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
2,169
On SlideShare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
22
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

How to fix China vag com VCDS diagnsotic interface FT232R chip protection2

  1. 1. ADK obd2tuning technology CO.,LTD Web: www.obd2tuning.com Skype: ADKobdtools How to fix China vag com VCDS diagnsotic interface FT232R chip protection Already bought VCDS VAG 11.11 or vag com 11.8 diagnostic interface. You may meet problem--error: does not work , (not plugged into car message / interface worx) and cant update it to Vag com 12.10.3. Below OBD2Tuning sharing How to fix China vag com VCDS diagnsotic interface FT232R chip protection. Vag com 11.11 cable vcds 11.11 crack vcds hex usb interface
  2. 2. What we need do to fix VCDS interface FT232R chip protection error? Here OBD2Tuning share with you the solution steps Step 1: Reflash Atmega with dump. Firstly, supply 12V power to the Vag com VCDS interface, Connect ATMEGA 162 chip with port LPT of the pc to program it as shown on this picture:
  3. 3. Step 2: Remove components IC8, R50, R51, D7 as shown on the pic with red arrows.
  4. 4. Step 3: Reflash FTDI with dump. Step 4: Reflash GAL16V8 (ATF16V8) with dump.
  5. 5. Step 5: Solder 3 wires as shown on the pic with blue lines. Step 6:Copy loader to your VCDS directory. Q: When plug the vag com 11.11 with your pc, it is not recognised and comes up as "FFFFFFFFFFFFF". It worked fine for the first 2-3 times. Any advise please? A: Reprogram it, you need Reflash the china vag com
  6. 6. When vag com have any question, you must program Atmega162 with an external programmer. After that you need to program FTDI over USB with Mprog For RL cable you must program GAL/ATF - I assume that you have a RL cable because you asked loader and for RL cable you need to do some modifications to the PCB, then install VCDS 11.11.0 and copy loader to installation folder. Make a shortcut to your desktop (loader). Every time you want to use VCDS -- click the shortcut on the desktop Here you have a tutorial for programming Atmega chip(vag com) The document free download: Chinese RL cable repair.rar vag com 11.11 full dump.rar FT232RL.rar
  7. 7. VCDS 11.11.0 loader.rar Tutorial.rar

×