DtiCorp.com Is Introducing 10 Honeywell IFMS Signal Processors Honeywell’s flame monitoring systems are perfect for industries such as petroleum and petrochemical, power generation, pulp, paper and metals processing. Their ability to discriminate in the toughest environments tailors them for industrial process boilers, black liquor recovery boilers, co-generation boilers, grate fired boilers, cement or lime kilns, Claus reactors (H2S), thermal oxidizers and gas turbines. Fort Lauderdale, FL - Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com) is introducing 10 Brand New Honeywell IFMS Signal Processors. Honeywell’s flame monitoring systems are perfect for industries such as petroleum and petrochemical, power generation, pulp, paper and metals processing. Their ability to discriminate in the toughest environments tailors them for industrial process boilers, black liquor recovery boilers, co-generation boilers, grate fired boilers, cement or lime kilns, Claus reactors (H2S), thermal oxidizers and gas turbines. Honeywell’s industrial flame monitoring systems are uniquely suited for multiple burner applications, exotic fuels, hostile environments and burner types including combination, low NOx, tilting, opposed fired, hydrogen, duct and register. With the RP532 signal processors, the UV and IR flame components may be monitored simultaneously or separately. Additionally, the RP532 processors allow a total of three viewing heads; two individual CS55xB series detectors and one CS700/CS800 detector, which may be used for pilot monitoring. A detachable programming plate on the RP531 saves on large installations. Processors are compatible with Modbus communications for remote monitoring and diagnostics. Features RP532/RP531: - The RP532/RP531 are 3-channel, signal processors which amplify and conditions the viewing head signal for use with a burner management system. It provides a proportional 0/4-20mA output signal per attached viewing head as well as two SPDT flame relay outputs, one SPDT self-check relay output and one N.O. alarm relay output per channel. Allows a total of 3 viewing heads; two individual CS55xB and one CS700/CS800, which may be used for pilot monitoring. The CS550B UV and IR flame components may be monitored simultaneously or separately. Features RP522: - The RP522 is a 2-channel, signal processor which amplifies and conditions the viewing head signal for use with a burner management system. It provides a proportional 0/4-20mA output signal based on the currently used viewing head as well as two SPDT flame relay outputs and one SPDT self-check relay output. Allows 2 CS55xB viewing heads at a time with a toggle between channels. Its 4-digit alphanumeric display and 11 push buttons facilitate viewing head programming, monitoring and diagnostics. Features R700/800: - The R700/800 is a compact 1-channel, signal processor which amplifies and conditions the viewing head signal for use with a burner managem

1. DtiCorp.com Is Introducing 10 Honeywell
IFMS Signal Processors
Honeywell’s flame monitoring systems are perfect for industries such as petroleum and
petrochemical, power generation, pulp, paper and metals processing. Their ability to
discriminate in the toughest environments tailors them for industrial process boilers, black
liquor recovery boilers, co-generation boilers, grate fired boilers, cement or lime kilns,
Claus reactors (H2S), thermal oxidizers and gas turbines.
Fort Lauderdale, FL - Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com) is
introducing 10 Brand New Honeywell IFMS Signal Processors. Honeywell’s flame monitoring systems
are perfect for industries such as petroleum and petrochemical, power generation, pulp, paper and metals
processing. Their ability to discriminate in the toughest environments tailors them for industrial process
boilers, black liquor recovery boilers, co-generation boilers, grate fired boilers, cement or lime kilns,
Claus reactors (H2S), thermal oxidizers and gas turbines. Honeywell’s industrial flame monitoring
systems are uniquely suited for multiple burner applications, exotic fuels, hostile environments and burner
types including combination, low NOx, tilting, opposed fired, hydrogen, duct and register. With the
RP532 signal processors, the UV and IR flame components may be monitored simultaneously or
separately. Additionally, the RP532 processors allow a total of three viewing heads; two individual
CS55xB series detectors and one CS700/CS800 detector, which may be used for pilot monitoring. A
detachable programming plate on the RP531 saves on large installations. Processors are compatible with
Modbus communications for remote monitoring and diagnostics.
Features RP532/RP531:
- The RP532/RP531 are 3-channel, signal processors which amplify and conditions the viewing head
signal for use with a burner management system. It provides a proportional 0/4-20mA output signal per
attached viewing head as well as two SPDT flame relay outputs, one SPDT self-check relay output and
one N.O. alarm relay output per channel. Allows a total of 3 viewing heads; two individual CS55xB and

2. one CS700/CS800, which may be used for pilot monitoring. The CS550B UV and IR flame components
may be monitored simultaneously or separately.
Features RP522:
- The RP522 is a 2-channel, signal processor which amplifies and conditions the viewing head signal for
use with a burner management system. It provides a proportional 0/4-20mA output signal based on the
currently used viewing head as well as two SPDT flame relay outputs and one SPDT self-check relay
output. Allows 2 CS55xB viewing heads at a time with a toggle between channels. Its 4-digit
alphanumeric display and 11 push buttons facilitate viewing head programming, monitoring and
diagnostics.
Features R700/800:
- The R700/800 is a compact 1-channel, signal processor which amplifies and conditions the viewing
head signal for use with a burner management system. It provides a proportional 0/4-20mA output signal
based on the connected viewing head as well as two SPDT flame relay outputs and one SPDT self-check
relay output.
Features RP222:
- The RP222A is a 1-channel, signal processor which amplifies and conditions the viewing head signal for
use with a burner management system. Used for continuous UV flare stack monitoring to ensure no
unburned toxic or waste gases are released into the atmosphere. Its 4-digit alphanumeric display and 11
push buttons facilitate viewing head programming, monitoring and diagnostics.
Models available:
1. RP531A1002 AC Signal Processor
2. RP531D1024 DC Signal Processor
3. RP532A1026 AC Signal Processor
4. RP532D1034 DC Signal Processor
5. RP522A1004 AC Signal Processor
6. RP522D1018 DC Signal Processor
7. R700A1000 AC Signal Processor

3. 8. R700S1012 DC Signal Processor
9. R800S1008 AC Signal Processor
10. RP222A1006 Watchdog Signal Processor
About Us: DtiCorp.Com (http://www.DtiCorp.com) carries more than 35,000 HVAC products,
including industrial, commercial and residential parts and equipment from Honeywell, Johnson
Contols, Robertshaw, Jandy, Grundfos, Armstrong and more. Our online catalog is easy to
navigate and search, and all products have a picture and a description. If a customer has any
questions about a product, they can call 800-757-5999 and speak with one of our product
experts. Our mission is to offer the best prices anywhere to our customers.
Julian Arhire
Manager DtiCorp.com
Phone: 954.484.2929
Fax: 954.484.5155
Web: http://www.DtiCorp.com
###
DtiCorp.com, Honeywell, IFMS Signal Processor, IFMS, Signal Processor, RP532, RP531, RP522,
R700, R800, RP222, RP531A1002, RP531D1024, RP532A1026, RP532D1034, RP522A1004,
RP522D1018, R700A1000, R700S1012, R800S1008, RP222A1006, flame monitoring system