ICO | Engineer Plus: Construction Chemicals

1. INDORE COLOUR ORGANICS LTD. REGD. Office 61, Jawahar Marg, Chemical House. INDORE-452 004. (M.P.) INDIA Phone : 91-0731-2467847, 2361171 Tele Fax : 91-0731-2476435. E-mail : info@icoindia.com Website : www.icoindia.com ISO 9001 : 2000 Certified Company

2. M/s. Indore Colour Organics Limited is an existing registered company under the Companies Act, 1956 for theM/s. Indore Colour Organics Limited is an existing registered company under the Companies Act, 1956 for the manufacture of construction, waterproofing, and heat proofing for remedial measure of water leakage inmanufacture of construction, waterproofing, and heat proofing for remedial measure of water leakage in building and strengthen the concrete since 1998. The company was initially private Limited and converted tobuilding and strengthen the concrete since 1998. The company was initially private Limited and converted to Limited on 09.02.2005 (Memorandum of Association and Article of Association is attached). The productsLimited on 09.02.2005 (Memorandum of Association and Article of Association is attached). The products manufactured by the company are developed with own R&D. The unit is an ISO-9001:2000 and accredited bymanufactured by the company are developed with own R&D. The unit is an ISO-9001:2000 and accredited by JAS ANZ in 2004 and BIS certificate for “Integral Waterproofing” in 2005.JAS ANZ in 2004 and BIS certificate for “Integral Waterproofing” in 2005. First time in the country our products were recognized as a basic chemicals by “Basic Chemical & CosmeticsFirst time in the country our products were recognized as a basic chemicals by “Basic Chemical & Cosmetics Export Promotion Council” (CHEMEXIL) Our company is the first in the country to use Barcoding forExport Promotion Council” (CHEMEXIL) Our company is the first in the country to use Barcoding for construction chemicals. The I.I.T. New Delhi has granted us corporate membership on the basis of own R&D.construction chemicals. The I.I.T. New Delhi has granted us corporate membership on the basis of own R&D. Government of India displayed our product in International Exhibition in Japan, South Africa, Middle East. OurGovernment of India displayed our product in International Exhibition in Japan, South Africa, Middle East. Our company is registered with NSIC for Government supplies. We have supplied our products and we arecompany is registered with NSIC for Government supplies. We have supplied our products and we are registered vendor to public sector undertakings like.BARC Trombay BHEL Jhansi, SAIL Bhilai, CPWD, Railwaysregistered vendor to public sector undertakings like.BARC Trombay BHEL Jhansi, SAIL Bhilai, CPWD, Railways etc. and private enterprises like Reliance Infocom, Bhilwara Group, Times Group etc. Our company is registeredetc. and private enterprises like Reliance Infocom, Bhilwara Group, Times Group etc. Our company is registered with Ministry of Commerce, Government of India for Import & Export. We are exporting our products towith Ministry of Commerce, Government of India for Import & Export. We are exporting our products to Nepal.Our sample also approved by Bureau of Standards in South Africa (SABS).Nepal.Our sample also approved by Bureau of Standards in South Africa (SABS). We have also received the “We have also received the “National Award”National Award” from Govt. of India, Ministry of M.S.M.E. for Entrepreneurshipfrom Govt. of India, Ministry of M.S.M.E. for Entrepreneurship for the year 2005-2006.for the year 2005-2006. The company products received overwhelming response and some of the products like WPC-99, CAM-99,WTF-99,The company products received overwhelming response and some of the products like WPC-99, CAM-99,WTF-99, WAC-99 became a generic name for waterproofing compound and today we have a range of more than 25WAC-99 became a generic name for waterproofing compound and today we have a range of more than 25 products. Consistency in quality with continuous up-gradation and looking to market response / demand weproducts. Consistency in quality with continuous up-gradation and looking to market response / demand we have decided to go for expansion and modernization of our present micro unit. For this purpose we havehave decided to go for expansion and modernization of our present micro unit. For this purpose we have acquired about 9510 sq. mtrs. of land at Village Bisanavda near Indore Airport.acquired about 9510 sq. mtrs. of land at Village Bisanavda near Indore Airport. PROFILE

3. Certificates and affiliationCertificates and affiliation Our Prestigeous Honours & Affiliation for Quality, Competency & Reliability.

4. Leak proof plan for Church Gate roof by ICO FT TECHNOLOGY

5. Manglore Tile RoofManglore Tile Roof Re-inforcement FT TechnologyRe-inforcement FT Technology for Repairing & Water Proofing.for Repairing & Water Proofing. Manglore Tile roof is commonly used on heritage building and tradition lookingManglore Tile roof is commonly used on heritage building and tradition looking building. It is observed that Manglore tile is detoriated due to ultra violet rays ofbuilding. It is observed that Manglore tile is detoriated due to ultra violet rays of sun light, climatic changes, rains dust, moisture etc. and Offenly requiresun light, climatic changes, rains dust, moisture etc. and Offenly require maintenance Traditionally for maintenance bitumen sheet is used, bitumen ismaintenance Traditionally for maintenance bitumen sheet is used, bitumen is effective for one season only because it melts in summer season and shrinks ineffective for one season only because it melts in summer season and shrinks in cold.Thus due to extreme changes in temperature bitumen leaves the surface ofcold.Thus due to extreme changes in temperature bitumen leaves the surface of Manglore tile roof.Therefore,this is not a trusted and effective system.Some timesManglore tile roof.Therefore,this is not a trusted and effective system.Some times applicators use chemical putty like Epoxy,PU,Acrylic etc.,which are very expensiveapplicators use chemical putty like Epoxy,PU,Acrylic etc.,which are very expensive and also not longer lasting,with in a short time again cracks are observed. To overand also not longer lasting,with in a short time again cracks are observed. To over come the problem with many fold advantages we have developed a unique systemcome the problem with many fold advantages we have developed a unique system of repairing Manglore tile roof along withof repairing Manglore tile roof along with water proofingwater proofing calledcalled Reinforcement FTReinforcement FT TechnologyTechnology.The same system of repairing of Manglore tile can be applied for.The same system of repairing of Manglore tile can be applied for isolated cracks & joints repairing of Manglore tile on the site.isolated cracks & joints repairing of Manglore tile on the site.

6. Manglore Tile Roof Repairing 1) Increases life of Maglore Tile Roof1) Increases life of Maglore Tile Roof * Bitumen detoriates it’s life* Bitumen detoriates it’s life 2) Safe with all weather2) Safe with all weather * Unsafe* Unsafe 3) Safe with ultra violet rays of3) Safe with ultra violet rays of SunlightSunlight * Unsafe.* Unsafe. 4) Longer lasting. Waterproof4) Longer lasting. Waterproof surface gets more strengthsurface gets more strength * Effective for one season in* Effective for one season in summer tar melts and detoriatessummer tar melts and detoriates the surface. Lose strength.the surface. Lose strength. 5) Reinforcement makes the surface5) Reinforcement makes the surface more strong and un-breakablemore strong and un-breakable * No reinforcement* No reinforcement 6) The surface is ultra white or6) The surface is ultra white or manglore tile colour so it looks verymanglore tile colour so it looks very good.good. * Surface is blackish and dirty* Surface is blackish and dirty in lookin look 7) Can be applied in any season7) Can be applied in any season * Difficult to apply in rainy season* Difficult to apply in rainy season 8) Durable8) Durable * Un-durable* Un-durable 9) Authentic, Guaranteed9) Authentic, Guaranteed * No authenticity, No guarantee* No authenticity, No guarantee 10) Under the shade 6 to 7 C10) Under the shade 6 to 7 C temperature decreases, thustemperature decreases, thus reduces electric consumption.reduces electric consumption. * Under the shade temperature* Under the shade temperature increases, thus increases electricincreases, thus increases electric consumption.consumption. 11) Under the shade seating is pleasant11) Under the shade seating is pleasant * Seating is scorching* Seating is scorching By FT Technology. Old System of Bitumen

7. Advantage of above citedAdvantage of above cited Manglore Tile roof reinforcementManglore Tile roof reinforcement FT system :FT system : (1) Repairing of cracks on the spot without disturbing the infrastructure(1) Repairing of cracks on the spot without disturbing the infrastructure (2) It saves lot of expensive epoxy putty required repeatedly to stop leakages.(2) It saves lot of expensive epoxy putty required repeatedly to stop leakages. (3) Full laping areas and joints of manglore tile are covered therefore no(3) Full laping areas and joints of manglore tile are covered therefore no leakage is possible from that place.leakage is possible from that place. (4) Maintainance free powerful water proof surface develops.(4) Maintainance free powerful water proof surface develops. (5) Menglore tile roof gets strength with reinforcement(5) Menglore tile roof gets strength with reinforcement (6) Life of the manglore tile roof increases manyfold due to high durability &(6) Life of the manglore tile roof increases manyfold due to high durability & toughnesstoughness (7) No effect of ultra violet rays, rains, dust, heat & climatic changes.(7) No effect of ultra violet rays, rains, dust, heat & climatic changes. (8) With above cited treatment detoriation of manglore tile roof minimizes(8) With above cited treatment detoriation of manglore tile roof minimizes (9) Treated surface remains always clean, no fungus, no black spots.(9) Treated surface remains always clean, no fungus, no black spots. (10) Safe, pollution free, eco-friendly, hygienic(10) Safe, pollution free, eco-friendly, hygienic (11) High heat stability between 0 C to 90 C(11) High heat stability between 0 C to 90 C (12) High freez thaw stability(12) High freez thaw stability (13) Resistance to high alkali, sulphates, salts, mild acids & water.(13) Resistance to high alkali, sulphates, salts, mild acids & water. (14) Rust Proof(14) Rust Proof (15) Economical(15) Economical

8. Position of ManglorePosition of Manglore tile on breakage stagetile on breakage stage

9. Position of manglore tile on breakage stage

13. Punchered bitumen sheet

16. VALLEYGUTTERVALLEYGUTTER

17. valleygutter

18. valleygutter

19. valleygutter

20. valleygutter

21. Ridges of mangloreRidges of manglore tile rooftile roof

22. Ridges of manglore tile roof

24. Ridges of manglore tile

25. Ridges of manglore tile roo

30. Suns cleat.Suns cleat.

31. Suns cleat.

32. Suns cleat.

33. Earlier TreatmentEarlier Treatment

34. Precautions Earlier Treatment

35. Earlier Treatment

36. Earlier Treatment

37. Measurement of MangloreMeasurement of Manglore tile roof at church gatetile roof at church gate BuildingBuilding

38. what we will do now?what we will do now? Our Working ProcedureOur Working Procedure :-:-  Step 1st : -Step 1st : - Clean the surface by rubbing with wire brush to remove dust,Clean the surface by rubbing with wire brush to remove dust, fungus, grass root, rust & loose material.fungus, grass root, rust & loose material.  Step 2nd : -Step 2nd : - Wash the surface with SAC surface active chemicalWash the surface with SAC surface active chemical  Step 3rd : -Step 3rd : - Wash with mild acid solutionWash with mild acid solution  Step 4th : -Step 4th : - Wash with clean waterWash with clean water  Step 5th : -Step 5th : - Repair or changed menglore tile and apply MTRP-99 (Primer) toRepair or changed menglore tile and apply MTRP-99 (Primer) to getget an even surface & Strength.an even surface & Strength.  Step 6th : -Step 6th : - Cut a piece of fiber as per the required size for reinforcement.Cut a piece of fiber as per the required size for reinforcement.  Step 7th : -Step 7th : - Put the fabric on the menglore tile and stick it with glue.Put the fabric on the menglore tile and stick it with glue.  Step 8th : -Step 8th : - After 40-50 minutes apply coat on the surface by AWC-99After 40-50 minutes apply coat on the surface by AWC-99  brush and let it dry for one hour give one more coat on the surface.brush and let it dry for one hour give one more coat on the surface.  Step 9th : -Step 9th : - Let it dry for 24 hours for full strength.Let it dry for 24 hours for full strength.

39. Step 1stStep 1st Clean the surfaceClean the surface by rubbing withby rubbing with wire brush towire brush to remove dust,remove dust, fungus, grassfungus, grass Root, rust & looseRoot, rust & loose materialmaterial

40. Step 2ndStep 2nd Wash the surfaceWash the surface with SAC surfacewith SAC surface active chemicalactive chemical

41. Step 3rdStep 3rd WashWash with mildwith mild acid solutionacid solution

42. Step 4thStep 4th Wash with cleanWash with clean waterwater

43. Step 5thStep 5th Repair or changedRepair or changed menglow tile and applymenglow tile and apply MTRP-99 (Primer) toMTRP-99 (Primer) to get an even surface &get an even surface & Strength.Strength. 1 2 3

44. Step 6thStep 6th Cut a piece ofCut a piece of fabric as per thefabric as per the required size forrequired size for reinforcement.reinforcement.

45. Step 7thStep 7th Put the fabric onPut the fabric on the menglow tilethe menglow tile and stick it withand stick it with glue.glue.

46. Step 8thStep 8th After 40-50 minutesAfter 40-50 minutes apply a coat on theapply a coat on the surface of AWC-99surface of AWC-99 by brush and let itby brush and let it dry for one hourdry for one hour give one more coatgive one more coat on the surfaceon the surface

47. Step 9thStep 9th Let it dry for 24Let it dry for 24 hours for fullhours for full strength.strength.

48. ValleyGutterValleyGutter

49. RidgesRidges

50. RidgesRidges

51. Overview of manglore tile final workOverview of manglore tile final work

54. Overview of manglore tileOverview of manglore tile final workfinal work

55. Product DetailsProduct Details

56. SacSac Surface ActivationSurface Activation ChemicalChemical Surface Activation Chemical is for getting best results of chemical application on asbestos sheet or concrete. It is nonionic surfactant with water soluble solvents to clean the surface. It also washes algi & fungus etc. deposited on old sheets or on concrete surface. It is non hazardous, eco-friendly and powerful washing agent.

57. MTRP-99MTRP-99 Menglore Tile Roof PrimerMenglore Tile Roof Primer Menglore Tile Roof Primer is synthetic resin base fast drying gray viscous liquid for crack filling and strengthing the surface which develops water resistance thick layer on the surface and provides an even surface for reinforcement. It develop full strength with in 30 minutes of application Content : A proprietary product Binder : Combination of Alkyd Resins, Acrylic Copolymers, PVA Additives : Plasticizer, wetting agents, Micro Wax, Micronised Silica, China clay, Whiting. Preservative : Incan preservative and dry film preservative Above all ingredient are eco-friendly and non injurious to human body. No pollution because product is water base. Advantages : It has excellent adhesion to Menglore Tile Roof. It increases strength of Menglore Tile Roof along with its durability. It has excellent elastomaric and crack bridging capability. It is resistant to high alkali mild acid and salts. It is highly resistant to weather and ultra violet rays of sunlight

58. Reinforcement ClothReinforcement Cloth  A specially developed cotton cloth ofA specially developed cotton cloth of 36 x 36 count with36 x 36 count with  40 Rid - 28 pich duly sized with 10%40 Rid - 28 pich duly sized with 10% starch.starch.

59. Synthetic White GlueSynthetic White Glue (Sp. Binder for Fabric & Menglore Tile)(Sp. Binder for Fabric & Menglore Tile) It is a powerful synthetic water base white colouredIt is a powerful synthetic water base white coloured binder which instantly sticks the fabric cloth with primedbinder which instantly sticks the fabric cloth with primed Menglore Tile surface.Menglore Tile surface. After drying it is fully stable. The dried surface is notAfter drying it is fully stable. The dried surface is not effected with water.effected with water. It is highly resistant to weather and sunlight.It is highly resistant to weather and sunlight. It is an elastomatic compound formsIt is an elastomatic compound forms a very tough bonda very tough bond with subtract having good permeability rating.with subtract having good permeability rating. Resistant to high alkali, mild acids, sulphates salts,Resistant to high alkali, mild acids, sulphates salts, carbon dioxide.carbon dioxide.

60. MTWC-99MTWC-99 Menglore Tile Waterproofing CompoundMenglore Tile Waterproofing Compound Menglore Tile waterproofing compound is single component synthetic resinsMenglore Tile waterproofing compound is single component synthetic resins base fast drying gray viscous chemical competible with all masonry substrails.base fast drying gray viscous chemical competible with all masonry substrails. Highly resistant to algae fungus and micro organism. Resist alkalies, salts andHighly resistant to algae fungus and micro organism. Resist alkalies, salts and amospheric pollutants not effected by ultraviolet rays. Highly durable toughamospheric pollutants not effected by ultraviolet rays. Highly durable tough coat is formed with stand structural movements.coat is formed with stand structural movements. `` Advantages :Advantages : Excellent adhesion to asbestos surfaceExcellent adhesion to asbestos surface Highly durability and strong coat.Highly durability and strong coat. Unmatched elastomaric and crack bridging capabilityUnmatched elastomaric and crack bridging capability Highly resistant to rain water.Highly resistant to rain water. Abrasion Resistant and slow ageing.Abrasion Resistant and slow ageing.

61. Water proofing of ChinaWater proofing of China MoMosaisaic,RCC roof and side wallsc,RCC roof and side walls withwith ICOICO FTFT TechnologyTechnology

62. 1) Very fast working * Very slow working 2) No hammering, no further damage to surface * Hammering is must to remove material, damage surface 3) Waterproofing with chemicals, very light weight, no increase in weight on surface * Waterproofing with cement, sand metal, brick which is very heavy material. Puts heavy weight on roof. 4) Wall repairing is very easy * Wall repairing is difficult. 5) System is fullproof & guaranteed * System is not guaranteed 6) Waterproofing can be done in rainy season also. * Not possible in rainy season. 7) Healthy, Eco-friendly * Dusty, un-healthy, not eco-friendly 8) High heat stability * Low heat stability 9) Resistance to high alkali sulphates, * Not resistant to solts, alkalis, Comparison ICO FT Technology of Waterproofing. Old Technology

63. Measurement ofMeasurement of China mosaic roof atChina mosaic roof at Church GateChurch Gate BuildingBuilding

64. What we will doWhat we will do??

65. Procedure of waterproofing ofProcedure of waterproofing of China mosaic, any RCC Roof &China mosaic, any RCC Roof & Brick Walls Using WAC-99, MOG-Brick Walls Using WAC-99, MOG- 99 & WPC-99.99 & WPC-99. Step 1st : - Clean the surface by rubbing with wire brush to remove dust,Step 1st : - Clean the surface by rubbing with wire brush to remove dust, fungus, grass root, rust & loose material.fungus, grass root, rust & loose material. Step 2nd: - Clean the surface with mild hydrochloric acidStep 2nd: - Clean the surface with mild hydrochloric acid Step 3nd: - Wash the surface with SAC surface active chemicalStep 3nd: - Wash the surface with SAC surface active chemical Step 4th : - Wash with clean waterStep 4th : - Wash with clean water Step 5th : - Repaire big cracks of surface with a putty made by WAC-99Step 5th : - Repaire big cracks of surface with a putty made by WAC-99 & MOG-99& MOG-99 Step 6th : - Prepare brusheble mortar of WAC –99 & MOG-99. ApplyStep 6th : - Prepare brusheble mortar of WAC –99 & MOG-99. Apply two coat of this mortar within 45 to 60 minutes.two coat of this mortar within 45 to 60 minutes. Step 7th : - Apply two coat of WPC-99 in 1:1 praportion with waterStep 7th : - Apply two coat of WPC-99 in 1:1 praportion with water This system gets full strength within 24 hours

66. Step 1stStep 1st  Clean the surface byClean the surface by rubbing with wire brushrubbing with wire brush to remove dust, fungus,to remove dust, fungus, grass root, rust & loosegrass root, rust & loose material.material.

67. Step 2ndStep 2nd  Clean the surface withClean the surface with mild hydrochloric acidmild hydrochloric acid

68. Step 3rdStep 3rd  Wash the surface withWash the surface with SAC surface activeSAC surface active chemicalchemical

69. Step 4thStep 4th  Wash with clean waterWash with clean water

70. Step 5thStep 5th  Repair big cracks ofRepair big cracks of surface with a puttysurface with a putty made by WAC-99 &made by WAC-99 & MOG-99MOG-99

71. Step 6thStep 6th  Prepare brushablePrepare brushable mortar of WAC –99 &mortar of WAC –99 & MOG-99.Apply twoMOG-99.Apply two coat of this mortarcoat of this mortar within 45 to 60 minutes.within 45 to 60 minutes.

72. Step 7thStep 7th  Apply two coat ofApply two coat of WPC-99 in 1:1WPC-99 in 1:1 proportions with waterproportions with water

73. ProductsProducts

74. SACSAC Surface Activation ChemicalSurface Activation Chemical  Surface Activation Chemical is for getting best results ofSurface Activation Chemical is for getting best results of chemicalchemical  application on menglore tile, asbestos sheet or concrete.application on menglore tile, asbestos sheet or concrete.  It isIt is nonionic surfactant with water soluble solventsnonionic surfactant with water soluble solvents to cleanto clean the surface.the surface.  It also washes algi & fungus etc. deposited on old menglowIt also washes algi & fungus etc. deposited on old menglow tiles,or ontiles,or on  concrete surface.concrete surface.  It is non hazordus, eco-friendly and powerful washing agent.It is non hazordus, eco-friendly and powerful washing agent.

75. WAC-99WAC-99 Waterproof Additive for CementWaterproof Additive for Cement  WAC-99 is a multipurpose highly concentrated highWAC-99 is a multipurpose highly concentrated high performance Latex Emulsion. Useful as an additive forperformance Latex Emulsion. Useful as an additive for concrete mortars in repair/Water proofing applications as wellconcrete mortars in repair/Water proofing applications as well as protective coating to ementitious substances.as protective coating to ementitious substances. Content :Content :  WAC-99 is concentrated Latex Emulsion of Acrylic co-polymerWAC-99 is concentrated Latex Emulsion of Acrylic co-polymer with plasticizers, wetting agents extendensemulcifier,with plasticizers, wetting agents extendensemulcifier, preservatives,pigments etc.preservatives,pigments etc.

76. MOG-99MOG-99 (Micronised Organic Grains)(Micronised Organic Grains) MOG-99 is micronised amorphous silicaMOG-99 is micronised amorphous silica  UsesUses ::  For surface preparation before waterproofing mainly usedFor surface preparation before waterproofing mainly used with WAC-99 & WPC-99 for crack filling.with WAC-99 & WPC-99 for crack filling.  Due to it’s out standing beading effect coating with WAC-99 orDue to it’s out standing beading effect coating with WAC-99 or WPC-99 a uniform tough hydrophobic, impermeable plasticWPC-99 a uniform tough hydrophobic, impermeable plastic film is developed on the surface.film is developed on the surface.  The Plastic film developed with MOG-99 and WAC-99 orThe Plastic film developed with MOG-99 and WAC-99 or WPC-99 is durable to chemical attack, abrasion, corrosion.WPC-99 is durable to chemical attack, abrasion, corrosion.  Used in high performance concrete for high workability, veryUsed in high performance concrete for high workability, very high early strength and long term durability.high early strength and long term durability.  Acts as a very good heat insulatorActs as a very good heat insulator..

77. Physical Properties :Physical Properties : Chemical Properties :Chemical Properties : (i) Silica Sio2(i) Silica Sio2 : 88% + 2%: 88% + 2% (ii) Carbon(ii) Carbon : 5%: 5% (iii) Moisture(iii) Moisture : 2.5% maximum: 2.5% maximum (iv) pH(iv) pH : 8: 8 (v) Water soluble(v) Water soluble : 6.4%: 6.4% (a) Physical State(a) Physical State : Micronised powder: Micronised powder (b) Color Apperance(b) Color Apperance : Grey fine powder: Grey fine powder (c) Odour(c) Odour : Odourless: Odourless (d) Bulk density(d) Bulk density : 0.56gm./cc without compact: 0.56gm./cc without compact 0.70gm./cc after compact0.70gm./cc after compact (e) Specific Gravity(e) Specific Gravity : 5: 5

78. WPC-99WPC-99 (Waterproofing Compound)(Waterproofing Compound)  A unique proprietory fomulation to stop water leakagesA unique proprietory fomulation to stop water leakages from cement concrete,from cement concrete,  asbestos sheet, cement substract, capable of with standingasbestos sheet, cement substract, capable of with standing movements frommovements from  structural conditions competible with all masonrystructural conditions competible with all masonry subscracts. Resist alkalies,subscracts. Resist alkalies,  salts and asmospheric pollutants. Resist algae, fungus,salts and asmospheric pollutants. Resist algae, fungus, ultra violet rays and carbondyoxide of auto exhaust.ultra violet rays and carbondyoxide of auto exhaust. Increase durability and toughness of concrete,Increase durability and toughness of concrete,  good permeability rating and wheathering characteristics.good permeability rating and wheathering characteristics. Breathable coatingBreathable coating  for repair transmission.for repair transmission.

79. Technical View :Technical View : (a)Physical From(a)Physical From : Free flow liqued (Pinkish): Free flow liqued (Pinkish) (b) Solids(b) Solids : 50% + 2%: 50% + 2% (c) PH(c) PH : 8-9: 8-9 (d) Solubility in water(d) Solubility in water : Readily soluble: Readily soluble (e) Odour(e) Odour : Characteristic: Characteristic (f) Specific Gravity(f) Specific Gravity : 1.1: 1.1 (g) Surface Drying(g) Surface Drying : 5 minutes.: 5 minutes. (h) Dried Film(h) Dried Film : Transparent. (Film thickness :: Transparent. (Film thickness : 80-100 microns per coat.)80-100 microns per coat.) (i) Solubility after dryin : Fully stable, not soluble in(i) Solubility after dryin : Fully stable, not soluble in water.water.

80. Introducing Asbestos sheet Re-inforcement FT Technology for Repairing, Water Proofing & Heat Proofing.Asbestos sheet is commonly used on industrial shades, railway plateforms, godowns etc. It is observed that asbestos is detoriated due to ultra violet rays of sun light , climatic changes,rains, dust, moisture etc. and offenly requires maintainance. Traditionally for maintainance bitumen sheet is used, bitumen is effective for one season only because it melts in summer season and shrinks in cold. Thus due to extreame changes in temperature bitumen leaves the suface of asbestos sheet.Therefore, this is not a trusted and effective system. Some times applicators use chemical putty like Epoxy, PU, Acrylicetc., which are very expensive and also not longer lasting, with in a short time again cracks are seen.To over come the problem with many fold advantages we have developed a uuique system of repairing asbestos sheet along with water proofing and heat proofing called Reinforcement FT Technology.

81. COMPARISION By FT Technology. 1) Increases life of Asbestos sheet 2) Safe with weather 3) Safe with ultra violet rays of Sunlight 4) Longer lasting. Waterproof surface gets more strength 5) Reinforcement makes the surface more strong and un-breakable 6) The surface is ultra white and good in look 7) Can be applied in any season 8) Durable 9) Authentic, Guaranteed 10) Under the shade 6 to 7 C temperature decreases, thus reduces electric consumption. 11) Under the shade seating is pleasant Old System of Bitumen 1) Bitumen detoriates it’s life 2) Unsafe 3) Unsafe. 4) Effective for one season in summer tar melts and detoriates the surface. Lose strength. 5) No reinforcement 6) Surface is blackish and dirty in look 7) Difficult to apply in rainy season 8) Un-durable 9) No authenticity, No guarantee 10) Under the shade temperature increases, thus increases electric consumption. 11) Seating is scorching

82. Advantage of above cited Asbestos sheet reinforcement FT system : (1) Maintainance free powerful water proof & heat proof ultra white surface develops. (2) Asbestos sheet gets strength with reinforcement (3) Life of the sheet increases manyfold due to high durability & toughness (4) No effect of ultra violet rays, rains, dust, heat & climatic changes. (5) With above cited treatment detoriation of asbestos sheet minimizes (6) Treated surface remains always clean, no fungus, no black spots. (7) Safe, pollution free, eco-friendly, hygienic (8) High heat stability between 0 C to 90 C (9) High freez thaw stability (10) High decrease in room temperature and electric expenses (11) Super white surface easily washable with clean water (12) Resistance to high alkali, sulphates, salts, mild acids & water. (13) Rust Proof (14) Economical

83. Position of AC sheets  Photos are of Indore Railway station officers rest house lobby area.  Condition before (ICO FT Reinforcement Technology) treatment.

84. Working Procedure :- Step 1st : - Clean the surface by rubbing with wire brush to remove dust, fungus, grass root, rust & loose material. Step 2nd : - Wash the surface with SAC surface active chemical Step 3rd : - Wash with mild acid solution Step 4th : - Wash with clean water Step 5th : - Repair damaged sheet and apply ASP-99 (Primer) to get an even surface & strength. Step 6th : - Cut a piece of fiber as per the required size for reinforcement. Step 7th : - Put the fibre on the sheet and stick it with glue. Step 8th : - After 40-50 minutes apply water & heat proof white coat on the surface by HPC-99 brush and let it dry for one hour give one more coat on the surface. Step 9th : - Let it dry for 24 hours for full strength

85. Step 1st  Clean the surface by rubbing with wire brush to remove dust, fungus, grass root, rust & loose material.

86. Step 2nd  Wash the surface with SAC surface active chemical

87. Step 3rd  Wash with mild acid solution

88. Step 4th  Wash with clean water

89. Step 5th  Repair damaged sheet and apply ASP- 99 (Primer) to get an even surface & strength

90. Step 6th Cut a piece of fiber as per the required size for reinforcement.

91. Step 7th  Put the fibric on the sheet and stick it with glue.

92. Step 8th  After 40-5 0 minutes apply water & heat proof white coat on the surface by HPC- 99 brush and let it dry for one hour give one more coat on the surface.

93. Step 9th  Step 9th : - Let it dry for 24 hours for full strength

94. Final Look

95. SAC Surface Activation Chemical  Surface Activation Chemical is for getting best results of chemical  application on asbestos sheet or concrete.  It is nonionic surfactant with water soluble solvents to clean the surface.  It also washes algi & fungus etc. deposited on old sheets or on concrete surface.  It is on hazordus, eco-friendly and powerful washing agent.

96. ASP-99 Asbestos Sheet Primer Asbestos Sheet Primer is synthetic resin base fast drying gray viscous liquid for crack filling and strengthing the surface which develops water resistance thick layer on the surface and provides an even surface for reinforcement. It develop full strength with in 30 minutes of application. Advantages : It has excellent adhesion to asbestos surface. Strength of the asbestos sheet along with its durability. It has excellent elastomaric and crack bridging capability. It is resistant to high alkali mild acid and salts. It is highly resistant to weather and ultra violet rays of sunlight.

97. Reinforcement Cloth A specially developed cotton cloth of 36 x 36 count with 40 Rid - 28 pich duly sized with 10% starch.

98. Glue  It is a powerful synthetic water base white coloured binder which  instantly sticks the fabric cloth with primed asbestos surface.  After drying it is fully stable. The dried surface is not effected  with water.  It is highly resistant to weather and sunlight.  It is an elastomatic compound forms a very tough bond with  subtract having good permeability rating.  Resistant to high alkali, mild acids, sulphates salts, carbon dioxide.

99. HPC-9 Heat Proof Compound HPC-99 Is a matchless heat proof compound which wonderfully works on masonry surface. IT stops heat penetration and keeps cool by reflecting more than 80% heat of the sun from a surface. It makes you comfortable to walk on, to live with and to save electric energy Advantages:Advantages: (1) Very low heat penetration.(1) Very low heat penetration. (2) Very high heat reflection.(2) Very high heat reflection. (3) Considerable decrease in room temperature and electric consumption(3) Considerable decrease in room temperature and electric consumption (4) High resistance to ultra violet light.(4) High resistance to ultra violet light. (5) High heat stability (between 0 C to 90 C).(5) High heat stability (between 0 C to 90 C). (6) High freez thaw stability.(6) High freez thaw stability. (7) Good weathering characteristics.(7) Good weathering characteristics. (8) Excellent adhesion to most building materials and no need to cure.(8) Excellent adhesion to most building materials and no need to cure. (9) It produces excellent result on almost all absorbent mineral substrates by increasing(9) It produces excellent result on almost all absorbent mineral substrates by increasing durability, toughness, flexural and bond strength.durability, toughness, flexural and bond strength. (10) Excellent elastomatic and crack bridging capability.(10) Excellent elastomatic and crack bridging capability. (11) Very very low water absorption(11) Very very low water absorption (12) Resistance to high alkali, sulphates and salts.(12) Resistance to high alkali, sulphates and salts. (13) Low dirt pick up.(13) Low dirt pick up. (14) Anti corrosive, protects reinforcement steel and increases life of building.(14) Anti corrosive, protects reinforcement steel and increases life of building. (15) Anti Fungal, Anti Microbial.(15) Anti Fungal, Anti Microbial. (16) Safe, eco-friendly, hygienic.(16) Safe, eco-friendly, hygienic.

100. Water Tank coated HPC 99

101. Water Tank coated with HPC 99

102. Silicon SealantSilicon Sealant

103. Silicon SealantSilicon Sealant :: ► Filling of gaps between aluminum frames ofFilling of gaps between aluminum frames of doors & windows.doors & windows. ► The work shall be carried out in the stagesThe work shall be carried out in the stages mentioned belowmentioned below Stage : I - Cleaning of surface & making it free from dust grease & loose part. Stage : II -Application of the sealant in required width & depth.The sealant shall have non sagging, flexible at low and high temperature, fast rate room temperature cure, lowshrinkage, good UV resistance & insulation properties.

104. Treatment ofTreatment of expansion joints orexpansion joints or structural crackstructural crack

105. Treatment of expansionTreatment of expansion joints or structural crackjoints or structural crack Stage - IStage - I Cleaning of surfaceCleaning of surface and making it freeand making it free from dust,grease &from dust,grease & loose particles.loose particles.

106. Stage – IIStage – II Apply a coat ofApply a coat of poly sulphide primerpoly sulphide primer on the raw surfaceon the raw surface Treatment of expansion joints orTreatment of expansion joints or structural crackstructural crack

107. Treatment of expansionTreatment of expansion joints or structural crackjoints or structural crack Stage : III Filling the groove with PSS-99 (Poly Sulphide Sealant)

108. Grouting ofGrouting of cement slurry withcement slurry with chemicalschemicals

109. Grouting of cement slurryGrouting of cement slurry with chemicalswith chemicals  Grouting work with the cement slurry enriched with grouting additive ofGrouting work with the cement slurry enriched with grouting additive of ICO’s CGP-99, (Cement Grouting Polymers). Water cement ratio asICO’s CGP-99, (Cement Grouting Polymers). Water cement ratio as applicable.Thisapplicable.This work includes fixing the nipple by quick setting chemical ICS-99, drilling thework includes fixing the nipple by quick setting chemical ICS-99, drilling the hole of suitable dia, fixing GI/plastic nosel with cement mortar etc.The slurryhole of suitable dia, fixing GI/plastic nosel with cement mortar etc.The slurry shall be properly mixed & grouted with standard pressure groutingshall be properly mixed & grouted with standard pressure grouting pump.After grouting remove nipple & fill the nipple hole by mix of cement &pump.After grouting remove nipple & fill the nipple hole by mix of cement & ICS-99.ICS-99. General Areas of application to stop leakage and seepage areas below : (1) Foundation. (2) Retaining wall of basement (3) Under ground tank (4) Overhead tank (5) Column (6) Beam (7) Hollow Roof etc.

110. Derusting & Phosphating :Derusting & Phosphating :  Steel bars,windows,MSSteel bars,windows,MS parts etc.require derustingparts etc.require derusting before waterproofing orbefore waterproofing or any type of coating.This isany type of coating.This is very essential to stopvery essential to stop further damages to steelfurther damages to steel bars or the steel surfacebars or the steel surface before any protectivebefore any protective treatment.It to be donetreatment.It to be done efficiently by cleaning,efficiently by cleaning, derusting and developingderusting and developing a thin passive film of Zinca thin passive film of Zinc Phosphate using RAT-99.Phosphate using RAT-99.

111. Brick Bat CobaBrick Bat Coba ((a) Clean all the surface froma) Clean all the surface from loose particals, oil, dust, fungusloose particals, oil, dust, fungus & rust etc.and apply 2 coat of& rust etc.and apply 2 coat of WPC-99WPC-99 (b) Provide cement (Mortar) 1:4(b) Provide cement (Mortar) 1:4 mix on the prepaid the surfacemix on the prepaid the surface with mix of CAM-99.with mix of CAM-99. (c) Fix the brick bats in cement(c) Fix the brick bats in cement mortar with proper slopemortar with proper slope (d) Finished the complete surface(d) Finished the complete surface by the cement mortar 1:4 withby the cement mortar 1:4 with mix of CAM-99.mix of CAM-99. (e) Make falls tiling on the finished(e) Make falls tiling on the finished surface.surface.

112. Heat proofing of RCC roof, sideHeat proofing of RCC roof, side walls and PVC water tankwalls and PVC water tank  Heatproof coating of PVC waterHeatproof coating of PVC water tank to keep stored water cool intank to keep stored water cool in summersummer  Working processWorking process  (a)(a) Cleaning :Cleaning : Cleaning of dustCleaning of dust or any adhered material on theor any adhered material on the tank surface by wire brush andtank surface by wire brush and wash with clean water .Wipe outwash with clean water .Wipe out the water with cotton cloth andthe water with cotton cloth and dry the surface(b) Apply 1st coatdry the surface(b) Apply 1st coat on HPC-99 heatproof coating onon HPC-99 heatproof coating on the dried surface.After 30 minutesthe dried surface.After 30 minutes apply 2nd coat of HPC-99.Afterapply 2nd coat of HPC-99.After 40 minutes of 2nd coat apply 3rd40 minutes of 2nd coat apply 3rd coat of HPC-99coat of HPC-99

113. Other Application :Other Application : (1) Fixing of tiles & cladding of stone :(1) Fixing of tiles & cladding of stone : Use WTF-99 which is self curing waterproofing tile adhesive cum joint filler for vertically &Use WTF-99 which is self curing waterproofing tile adhesive cum joint filler for vertically & horizontally fixing of tiles & stones like ceramic, mosaic, marble, granite and also on Kota &horizontally fixing of tiles & stones like ceramic, mosaic, marble, granite and also on Kota & Dholpuri stone.Dholpuri stone. (2)(2) For curing of concrete & cement surface withoutFor curing of concrete & cement surface without water :water : Use CCA-99 in order to avoid fast drying of surface, which are exposed to atmosphericUse CCA-99 in order to avoid fast drying of surface, which are exposed to atmospheric conditions. It avoids the formation of early shrinkage cracks. It can be apply on slabs, walls,conditions. It avoids the formation of early shrinkage cracks. It can be apply on slabs, walls, road pavements, decks precast elements etc.road pavements, decks precast elements etc. (3)(3) Removal of “stuck on” concrete :Removal of “stuck on” concrete : For this purpose use MRA-99 on steel shuttering & metal form work. This will forms waterFor this purpose use MRA-99 on steel shuttering & metal form work. This will forms water resistance on chemical barrier with the alkalies in concrete. It works as a mold release agentresistance on chemical barrier with the alkalies in concrete. It works as a mold release agent and develops water / alkali resistance chemical barrier.and develops water / alkali resistance chemical barrier. (4)(4) Coating for exterior brick & stone :Coating for exterior brick & stone : Use SWR-99, it is silicon based water repelant transparent coating, it does not effect theUse SWR-99, it is silicon based water repelant transparent coating, it does not effect the exterior decorative colour but allows moisture to evoporate out easily, applicable on cementexterior decorative colour but allows moisture to evoporate out easily, applicable on cement paints surface, concrete, mortar, clay brick surface, natural & artificial stones, mangalore tiledpaints surface, concrete, mortar, clay brick surface, natural & artificial stones, mangalore tiled roofs, corrugatedroofs, corrugated AC sheet roofing etc.AC sheet roofing etc. (5(5) Plane Cement Concrete :) Plane Cement Concrete : Always use ourAlways use our CAM-99CAM-99 integral waterproofing chemical & cement plasticizer with every bagintegral waterproofing chemical & cement plasticizer with every bag of cement which is used in PCC & RCC work, concrete of beam & column, mortar for theof cement which is used in PCC & RCC work, concrete of beam & column, mortar for the plaster,coving area & other repairing work.plaster,coving area & other repairing work.

114. Our application procedure forOur application procedure for epoxy flooring is as under :epoxy flooring is as under :  (1) Remove all loose material & particles from the surface.(1) Remove all loose material & particles from the surface.  (2) Make it dust free.(2) Make it dust free.  (3) Apply 1st coat primer by brush and let it dry for 6-8 hours.(3) Apply 1st coat primer by brush and let it dry for 6-8 hours.  (4) Apply middle coat of color epoxy paste after drying the(4) Apply middle coat of color epoxy paste after drying the  primer coat.primer coat.  (5) Apply top coat of colour epoxy after 12 hours middle coat.(5) Apply top coat of colour epoxy after 12 hours middle coat.  (6) The coated surface can be used after 24 hours.(6) The coated surface can be used after 24 hours.  (7) Full strength is achieved in 72 hours of t he coating.(7) Full strength is achieved in 72 hours of t he coating.  Treatment areTreatment are : -Area of treated place should be: -Area of treated place should be calculate as per actualcalculate as per actual..

115. PRODUCTSPRODUCTS LISTLIST

116. PRODUCTS LISTPRODUCTS LIST  The company is manufacturing following waterproofing andThe company is manufacturing following waterproofing and construction chemicals :construction chemicals : Our products are used with cement for superior concrete and to enhance strength and life of cementius construction at the same time for Surface Treatment, Seal active cracks, Prevent leakages, grouts,repair and protection of under ground construction, sealants, waterproofing, water stoppages, industrial flooring, corrosion protection etc. These chemical compounds effectively prevent water leakage and increase the strength of cement concrete and increase the useful life of construction there by reduce the preventive, routine maintenance and also reduce setting time. Our products in a sense provides services to rehabitate the concrete structures.

117. WPC-99WPC-99 (Water Proofing Compound) CAM-99(Water Proofing Compound) CAM-99 (Cement Admixture)(Cement Admixture) WAC-99WAC-99 (Waterproof Additive for Cement)(Waterproof Additive for Cement) WTF-99WTF-99 (Waterproof Tile Fixer)(Waterproof Tile Fixer) SPC-99SPC-99 (Super Plasticizer for Cement Concrete)(Super Plasticizer for Cement Concrete) EFS-99EFS-99 (Epoxy Floor Screed)(Epoxy Floor Screed) MSC-99MSC-99 (Micro Silicon Concrete)(Micro Silicon Concrete) DPG-99DPG-99 (Dam Proofing Grout)(Dam Proofing Grout) PUC-99PUC-99 (Polyurethene coating for any surface(Polyurethene coating for any surface AWC-99 (Asbestos SheetAWC-99 (Asbestos Sheet available in any colour)available in any colour) Waterproofing Coating)Waterproofing Coating) LMP-99LMP-99 (Liquid Mortar Plasticizer)(Liquid Mortar Plasticizer) SST-99SST-99 (Silicon Sealent)(Silicon Sealent) SAC-99SAC-99 (Surface Activation Chemical)(Surface Activation Chemical) EFP-99EFP-99 (Epoxy Floor Primer)(Epoxy Floor Primer) EFR-99EFR-99 (Epoxy Floor Repair two component)(Epoxy Floor Repair two component) MRA-99MRA-99 (Mould Release Agent)(Mould Release Agent) SWR-99SWR-99 (Silicon Water Repellent )(Silicon Water Repellent ) ICS-99ICS-99 (Instant Cement Setting)(Instant Cement Setting) PSS-99PSS-99 ( Poly Sulphide Sealants)( Poly Sulphide Sealants) CCA-99CCA-99 Concrete Curing AidConcrete Curing Aid (White pigmented membrane)(White pigmented membrane) HPC-99 (Heat Proof Compound)HPC-99 (Heat Proof Compound) ASP-99 (Asbestos Sheet Primer)ASP-99 (Asbestos Sheet Primer) RAT-99RAT-99 (Rust Arrest.)(Rust Arrest.) MOG-99 (Micronised Organics Gains)MOG-99 (Micronised Organics Gains)

118. Quality policy and objectives I We, at ICO Ltd. believe in global harmony through happy living. We aim to save properties worth billions of rupees from water problem as water ruins more properties than any destruction due to natural disaster or war. It is our constant endeavour to develop water proofing chemicals and educate people on our product features to savour maintenance free dwelling for years to come. For this we shall constantly conduct qualitative and quantitative promotional activities ethically. We are commited to continually improve our Quality Management System with inputs in improving human relations, packing, managerial and administrative efficiency and much more. To develop range of products in the same family giving wide application base for all type of customers. To enhance marketing all over India and take efforts to promote abroad To ensure quality at all stage To encourage training of applicators so that they can generate independent employment.

119. Made by adchilli