Be the first to like this
Elcometer 215 oven data logger is an easy to use oven data recorder, used to measure and store the temperature profiles of both the sample and the oven during the cure process.
The Elcometer 215 is an easy to use oven data recorder, used to measure and store the temperature profiles of both the sample and the oven during the cure process. Both the thermal barrier and heat sink are constructed from stainless steel.
Specifically designed for powder or liquid coating batch and conveyor ovens
Large multi-lingual menu-driven display for easy operation
Measure temperature both horizontally and vertically as the component is passed through the cure process
Ideal in situations where powder coated thickness is inconsistent
Measures up to 6 temperatures at one time
Memory stores up to 260,000 readings or 8 production runs
Display the results of every stored reading, including Cure-Index
Start and stop logging at a pre-set temperature
Each Teflon coated high temperature resistant probe cable is easy to clean after each run
Variable measurement interval, date, time, ºC / ºF
Flexible evaluation of data
Quick display - the logger display shows maximum temperature and cure-index figure, percentage and pass/fail sign, as a value or graphic representation for each probe.
Logger to printer - a complete, full-colour report can be printed directly to any HP printer using the optional link.
Extensive analysis - comprehensive calculations and full customisable reports are easily produced as each system is supplied with the powerful data analysis software.
Simple 3-step operation for basic features
1. Place the probes on the product and switch on
2. Place the logger in the box and send it through the oven
3. Read the results from the display or send them to a printer or a PC
Elcometer 215 Temperature Probes
A wide range of K-Type temperature probes is available with 1.5m (4'9"), 3m (9'8") or 6m (19' 7") cable length. The Elcometer 215 can be used with a combination of up to 6 probes simultaneously and feature:
Perfect contact between probe and surface
Low mass and optimised shape to avoid influence on temperature of sample
Extremely strong, highly flexible and easy to clean Teflon® coated cables
Magnetic Surface probe - suitable or use on magnetic surfaces, this probe has a PTFE coated grip for safe removal from the substrate with a flexible metal probe arm
Combined Clamp / Magnetic Air and Surface probe - a versatile probe, especially useful when a variety of magnetic and non-magnetic samples is being used
Probe Identification Tags
Available as an accessory, these brass tags are an effective way of identifiying the probes attached to the data logger. Each tag is 27mm (1") in diameter and has a nickel plated 100mm (3.94") steel chain, numbered 1-6