1. Tips for Buying Furniture Hardware Accessories
www.aluminumhinge.net is a manufactory with 20 years of experience and expertise, we are
specialized in manufacturing high quality of aluminum alloy product, zinc alloy product,
aluminum profile, and processed stainless steel product. Now we will introduce some tips for
buying furniture hardware.
Tip 1 Check whether the fitting installation is reasonable
For example, check whether the door hardware wholesale lock switch can work or not; big
cabinet should be installed with three concealed hinges, some only installed with two will not
do; there should have three screws, but only one screw is installed on some cut corners,
which will fall after use.
Tip 2 The back of the mirror furniture should be checked
Select the furniture with mirror, such as dressers, clothes mirror, full-length mirror, you should
have a look to see if the mirror deforms or lose color, check whether the mercury at the back
of the mirror has inner liner and backplane, it is not qualified if it has no backplane, no paper
does not work, or else it will wear the mercury.
Tip 3 Sofa and soft bed should try to sit
When selecting sofa, soft bed, you should pay attention that the surface should be smooth,
but not spiky; hardware should be uniform and not hard here and soft there; the softness
should be moderate, which can neither be too hard nor too soft. The selection method for this
kind of furniture hardware supplies is to sit on and press by hands whether it is even or not,
whether the spring rings, if the spring layout is unreasonable, causing the spring bite spring,
it will beep. Secondly, you should note whether the quilting has break, jumper and the density
of the corner teeth is reasonable.
Tip 4 Check whether the veneer furniture flat-fell seam is strict
Either you paste wood veneer, PVC or paste pre-paint paper, you should pay attention that
whether the leather is paste smoothly, or whether there are drum kits, blistering, non tight
patchwork phenomena. Check to see directly against light. Ash wood veneer furniture is
easier to damage, which can be generally used for only two years. In terms of veneer, the
planing wood is better than peeling. The method to identify them is to see the pattern of the
wood, sliced veneer wood grain is straight and dense, peeling veneer pattern is sparse and
sparse. The ground part of particleboard veneer furniture must be sealed, or the board will
absorb moisture, bloat and damage. Generally, the corner place of veneer furniture is easy to
tilt, you can pull the corners by hands at the selection, if it is once you pull, then there’s
something wrong with the glue.
This article is come from:
http://www.chinawoodenflooring.com/index.php/tips-for-buying-furniture-hardware-
accessories.htm