การเลือก Legris Part Number ID

166 views

Published on

จำหน่ายอุปกรณ์นิวเมติกส์ Legris บริษัท นิวเมติก ดอทคอม (ประเทศไทย) จำกัด
www.นิวเมติก.com

Published in: Self Improvement
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
166
On SlideShare
0
From Embeds
0
Number of Embeds
3
Actions
Shares
0
Downloads
1
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

การเลือก Legris Part Number ID

  1. 1. จําหน่ายอุปกรณ์นิวเมติกส์ Legris บริษัท นิวเมติก ดอทคอม (ประเทศไทย) จํากัด Part Number Identification The part numbers used for our product ranges are coded in such a way as to make it easy to identify any particular item. Detailed explanations of these part numbers can be found in the corresponding chapters. Fittings and Valves T he part numbers are selected using a technical mnemonic code. Each fitting and valve is identified by: • thread or 2nd nominal diameter (2 digits) • a suffix, if applicable • model series (4 digits) • nominal diameter (2 digits) Fittings Valves 3101 Item type 06 10 Nominal diameter 0402 13 21 22 Item type Thread code Nominal diameter code: equates to the outside diameter of the tube. Thread code: see tables page 12. Nominal diameter DN Thread Suffix defining the customised series selected Nominal diameter code: equates to the bore diameter of the valve. Thread code: see tables page 12. When the product does not have a thread, the code used is: 00. Technical Tubing and Hose T he part numbers are selected using a technical mnemonic code. Each tube and hose is identified by: • model series (4 digits and a letter) • nominal diameter (2 digits) • colour (2 digits) • inside diameter, if applicable Tubing Hose 1025U08 Item type Nominal diameter 06 1040H56 Colour Item type 01 = 02 = 03 = 04 = 05 = 06 = For other colours, refer to chapter Technical Tubing and Hose. 16 Colour Nominal diameter code: equates to the inside diameter code. Colour code: see table below. Nominal diameter code: equates to the outside diameter. Colour code: see table below. 00 = Nominal diameter 04 www.นิวเมติก.com 07 = 08 = C

×