Memorándum de Entendimiento (MoU) entre Codelco y SQM
Rps 2300 test
1. 1-We have connected Router 1 to port 1 on the RPS and Router 2 to port 2 on the
RPS, and you can see the 2 LEDs
related to the 2 ports connected to
the 2 routers are in standby mode
(solid green)
You can see the 2 routers are
connected to the RPS, and the PS
(Internal power supply) LEDs on
both of them are solid green
2. Power off Router 1, RPS LED
on the router is green, PS LED
is amber, router delivers its
power from the RPS.
Port 1 LED on the RPS is
blinking green, and Port 2 LED
is blinking amber, so the router 2
is not backed up from the RPS
now.
Powering the Router 1 on
again.