India
 Shanta Industrial Estate
 I. B. Patel Road, # 37
Goregaon East,
 Mumbai- 400063
India

USA Sales / Engineering offi...
INTRODUCTION TO ROLLTEK ENGINEERING WORKS
Foundries:
    Developed Foundry for S.G.I. Castings which meets US Standard.
 ...
INTRODUCTION TO ROLLTEK ENGINEERING WORKS
Key Customer:
 Qatar Steel Company (Dubai)

Advantages:
   Cost advantages to ...
Roller Guide Box No 210 Conventional type to finish rounds Max190mmDia


   Roller View




                              ...
Roller Guide box no 0820 Cassette type design with frame to finish rounds max 14mm
                                     di...
Roller Guide Box No 0820 , 0830 & 45. The Guide Box 0820 & 0830 are Cassette type
where as Guide box No 45 is the Conventi...
Roller guide box no 0820 cassette type with Frame to mount the Roller guide
Box on the Rest bar.




                     ...
Roller guide box No 45 but Conventional type




                                     Confidential RollTek
               ...
R.G. Box No 0845 angle view




                              Confidential RollTek
                              Engineeri...
Roller Guide Box No 0845 Cassette design with frame




                                         Confidential RollTek
    ...
2 Roller guide box No 0835 (Heavy Duty New Design ) supplied to Qatar Steel Doha Qatar Units.




                        ...
Roller guide box No 0860 Cassette type with Frame capacity to finish rounds
maximum 45 mm diameter.




             Front...
Roller guide box 45 another view




                                   Confidential RollTek
                             ...
Same as above Roller view




                            Confidential RollTek
                            Engineering Wor...
Grooved Hardened and Ground D2 Quality Roller guide box No 0830, 0845, 0860,0885




                                     ...
Twister Rollers D2 quality for Roughing and finishing design Roller guide box.




                                       ...
Twister roller D2 quality for Roughing and finishing Mill Guide RS6C




Side view




                                   ...
NTM Delivery Strippers with Saddle for mounting. Material: Special Composition of Stainless Steel
to withstand Wear & tear...
Entry & Exit Guide (Strippers ) for Ovals, Rounds, Preovals, RCS, Squares and Diamond
                          sizes rang...
Same as SR No: 1 entry side view




                               Confidential RollTek
                               En...
Forged CK45 Grade Spindle for 8", 10", 12" 16" 18" 20" Mill




                                              Confidential...
Housing design roller guide box size RE7




Side View




                                           Confidential RollTek...
Same as SR No:1




                  Confidential RollTek
                  Engineering Works
Same as SR No: 4




                   Confidential RollTek
                   Engineering Works
Roller holder Comparison Box No 20 & Box No 125




                                         Confidential RollTek
        ...
Same as SR No: 26 but close view from entry side




                                         Confidential RollTek
       ...
Roller Guide Box No 85 design Conventional type to finish rounds
                     Max 70 mm Diameter




             ...
Roller Holder Left & Right side Design guide box no RE113




                                            Confidential Rol...
R.G. 45 Side view




                    Confidential RollTek
                    Engineering Works
Roller Holder Left & Right side Design size RE4




                                         Confidential RollTek
        ...
Roller holder Design Left & Right Side for Box No 60, 85, 125and 155 (Range)




                                         ...
Roller Guide Box no 125 Special build per customer requirements




      Side View




                                  ...
Same as 29 Front View




                        Confidential RollTek
                        Engineering Works
Roller View




              Confidential RollTek
              Engineering Works
Same as 41 different view




                            Confidential RollTek
                            Engineering Wor...
Design Static Guide with Cartridge to finish rounds
         From 8mm to 14mm Diameter




                               ...
Grooved Hardened and Ground D2 Quality Roller guide box No 125 and 155




                                               ...
Roller Guide Box No 125 Conventional type to finish rounds max 100 mm dia




                                            ...
Roller Guide box No RE115




                            Confidential RollTek
                            Engineering Wor...
Upcoming SlideShare
Loading in …5
×

Introduction To Rolltek Engineering Works 11 05 09

801 views

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
801
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
4
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Introduction To Rolltek Engineering Works 11 05 09

  1. 1. India Shanta Industrial Estate I. B. Patel Road, # 37 Goregaon East, Mumbai- 400063 India USA Sales / Engineering office Detroit-Michigan Provides onsite support Factory Size: 4,000 sq feet. Total Sale Annual: Year to date $ 6M Confidential RollTek Engineering Works
  2. 2. INTRODUCTION TO ROLLTEK ENGINEERING WORKS Foundries:  Developed Foundry for S.G.I. Castings which meets US Standard. Morgan (India ) also buys complete requirements .  Facilities for all types of ferrous and non-ferrous castings locally . Measuring Instruments:  Complete range of Measuring Instruments for manufacturing as well as for Inspection.  Capability of CMM measurements Quote Timing:  RollTek Engineering Works provides quotes within 48 to 72 upon receiving inquiry for an RFQ. Confidential RollTek Engineering Works
  3. 3. INTRODUCTION TO ROLLTEK ENGINEERING WORKS Key Customer:  Qatar Steel Company (Dubai) Advantages:  Cost advantages to current suppliers.  Part fits to current equipment / with no additional parts needed.  All parts will fit to current Ashlow / Morgan or other manufacturing equipment build types.  REW Roller guides are manufactured from a single piece casting (housing and roller holders) this design provides with a higher accuracy and a longer lasting part. Other parts Manufactured at site:  Spindles  Conveyor Rollers  Shafts for applications  Non-Ferrous Bushings  Chockes  Liner plates  Sprockets  Gears  Shaft set Fasteners  Spacers (Shims) Confidential RollTek Engineering Works
  4. 4. Roller Guide Box No 210 Conventional type to finish rounds Max190mmDia Roller View Confidential RollTek Engineering Works
  5. 5. Roller Guide box no 0820 Cassette type design with frame to finish rounds max 14mm diameter Confidential RollTek Engineering Works
  6. 6. Roller Guide Box No 0820 , 0830 & 45. The Guide Box 0820 & 0830 are Cassette type where as Guide box No 45 is the Conventional type. Capacity of 0820 is to finish max dia 14 mm , 0830 to finish 22 mm and box 45 is to finish maximum 35 mm dia. Confidential RollTek Engineering Works
  7. 7. Roller guide box no 0820 cassette type with Frame to mount the Roller guide Box on the Rest bar. Confidential RollTek Engineering Works
  8. 8. Roller guide box No 45 but Conventional type Confidential RollTek Engineering Works
  9. 9. R.G. Box No 0845 angle view Confidential RollTek Engineering Works
  10. 10. Roller Guide Box No 0845 Cassette design with frame Confidential RollTek Engineering Works
  11. 11. 2 Roller guide box No 0835 (Heavy Duty New Design ) supplied to Qatar Steel Doha Qatar Units. Confidential RollTek Engineering Works
  12. 12. Roller guide box No 0860 Cassette type with Frame capacity to finish rounds maximum 45 mm diameter. Front View Confidential RollTek Engineering Works
  13. 13. Roller guide box 45 another view Confidential RollTek Engineering Works
  14. 14. Same as above Roller view Confidential RollTek Engineering Works
  15. 15. Grooved Hardened and Ground D2 Quality Roller guide box No 0830, 0845, 0860,0885 Confidential RollTek Engineering Works
  16. 16. Twister Rollers D2 quality for Roughing and finishing design Roller guide box. Confidential RollTek Engineering Works
  17. 17. Twister roller D2 quality for Roughing and finishing Mill Guide RS6C Side view Confidential RollTek Engineering Works
  18. 18. NTM Delivery Strippers with Saddle for mounting. Material: Special Composition of Stainless Steel to withstand Wear & tear at high speed without scratching the Bars. Confidential RollTek Engineering Works
  19. 19. Entry & Exit Guide (Strippers ) for Ovals, Rounds, Preovals, RCS, Squares and Diamond sizes range from 30 mm to 190 mm Confidential RollTek Engineering Works
  20. 20. Same as SR No: 1 entry side view Confidential RollTek Engineering Works
  21. 21. Forged CK45 Grade Spindle for 8", 10", 12" 16" 18" 20" Mill Confidential RollTek Engineering Works
  22. 22. Housing design roller guide box size RE7 Side View Confidential RollTek Engineering Works
  23. 23. Same as SR No:1 Confidential RollTek Engineering Works
  24. 24. Same as SR No: 4 Confidential RollTek Engineering Works
  25. 25. Roller holder Comparison Box No 20 & Box No 125 Confidential RollTek Engineering Works
  26. 26. Same as SR No: 26 but close view from entry side Confidential RollTek Engineering Works
  27. 27. Roller Guide Box No 85 design Conventional type to finish rounds Max 70 mm Diameter Confidential RollTek Engineering Works
  28. 28. Roller Holder Left & Right side Design guide box no RE113 Confidential RollTek Engineering Works
  29. 29. R.G. 45 Side view Confidential RollTek Engineering Works
  30. 30. Roller Holder Left & Right side Design size RE4 Confidential RollTek Engineering Works
  31. 31. Roller holder Design Left & Right Side for Box No 60, 85, 125and 155 (Range) Confidential RollTek Engineering Works
  32. 32. Roller Guide Box no 125 Special build per customer requirements Side View Confidential RollTek Engineering Works
  33. 33. Same as 29 Front View Confidential RollTek Engineering Works
  34. 34. Roller View Confidential RollTek Engineering Works
  35. 35. Same as 41 different view Confidential RollTek Engineering Works
  36. 36. Design Static Guide with Cartridge to finish rounds From 8mm to 14mm Diameter Confidential RollTek Engineering Works
  37. 37. Grooved Hardened and Ground D2 Quality Roller guide box No 125 and 155 Confidential RollTek Engineering Works
  38. 38. Roller Guide Box No 125 Conventional type to finish rounds max 100 mm dia Confidential RollTek Engineering Works
  39. 39. Roller Guide box No RE115 Confidential RollTek Engineering Works

×