PermaTherm Glasteel

166 views

Published on

Glasteel
Resin rich surfaces that are tough, strong and easy to clean.

Published in: Technology, Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
166
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
0
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

PermaTherm Glasteel

  1. 1. 269 Industrial Park Rd. PermaTherm Monticello, GA 31064 {p} (706) 468-7500 269 Industrial Park Rd. | Monticello, GA 31064 {f } (706) 468-7510 Insulation Innovation {p} (706) 468-7500 | {f} (706) 468-7510 (866) 468-7510 {e} info@permatherm.net {e} permatherm@earthlink.com Glasteel Resin rich surfaces that are tough, strong and easy to clean.Maximum Sanitation Protection• Meets USDA Standards• Maximum sanitation protection• Significant cost savings over other materialsExcellent Quality• Years of dependable performance• Resin rich surface that is tough & easy to clean• Meets today’s high sanitation standardsHighly Impact Resistant• Extremely high strength to weight ratio• Tough surface that resitst shattering, scratches and abrasionsImproved Chemical Resistance• Resists stains• Rust proof• Mildew resistant• Minimum maintenance and never needs paintingLow Cost Installation• Easy to handle and install in any type of construction, and over any type of existing wall surface• No special tools needed• More economical than stainless steel or ceramic tileOutstanding Cleanability• Resists moisture• Cleans with regular detergents an dwater Contents and logo are property of PermaTherm, Inc. page 1 of 3 All rights reserved. Copyright 2008 ©
  2. 2. Typical Physical Properties (Series 1200)PROPERTY TEST METHOD UNIT GLASTEEL CLASS C GLASTEEL CLASS A GENERAL PURPOSE RESULT FIRE RETARDANT RESULTFlexural Strength ASTM D-790 PSI 17,000 10,000Flexural Modulus ASTM D-790 PSI 6.0 x 10(5) 3.1 x 10(5)Tensile Strength ASTM D-638 PSI 8,000 7,000Tensile Modulus ASTM D-638 PSI 9.43 x 10(5) 3.1 x 10(5)s% Elongation ASTM D-638 % 1.20 1.80Water Absorption 21°C @ 72 hrs. ASTM D-570 % 0.17s 0.72Izod Impact Strength ASTM D-256 ft-lbs./in. 7.0 7.16Coef. of Linear Thermal Exp. ASTM D-696 in./in./°F 2.22 x 10(-5) 2.39 x 10(-5)Barcol Hardness ASTM D-2583 Avg. 30 35Specific Gravity ASTM D-792 N/A 1.6138 1.5743Abrasion Resistance TABOR W/L % WT Loss 0.293 0.391Flash Ignition Temp. ASTM 1929 °C 430 400Self Ignition Temp. ASTM 1929 °C 450 430Flame Spread ASTM E-84 N/A 200 25Smoke Generation ASTM E-84 N/A <450 <450 Contents and logo are property of PermaTherm, Inc. page 2 of 3 All rights reserved. Copyright 2008 ©
  3. 3. Contents and logo are property of PermaTherm, Inc.page 3 of 3 All rights reserved. Copyright 2008 ©

×