Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

IPTV 2014 Blusens Networks Catalogue

1,131 views

Published on

IPTV Catalogue

Published in: Technology
  • Be the first to comment

  • Be the first to like this

IPTV 2014 Blusens Networks Catalogue

  1. 1. 2014 Product Catalogue IPTV www.blusensnetworks.com
  2. 2. the companythe company 32 www.blusensnetworks.com Blusens started its commercial activity in 2002 with a firm and determined step in a field traditionally controlled by multinational brands. The targets at that moment were ambitious but they were perfectly reflected in the 2002-2005 Strategy Plan. The Plan was thoroughly designed for us to be different and innovative, to grow at an unforeseen pace and provide the consumer electronics sector, so in need of a change, with new blood. We have created a quality brand from scratch, from the Spanish region of Galicia and for everybody, a quality brand guided by its excellence on every single operative aspect with the objective of being the best at what we do. Blusens has far exceeded these Plan objectives by becoming the MP3 sales leading manufacturer within the Spanish market in a time span of only four years, achieving up to 300% annual exponential growths and showing no hints of decrease. Blusens, with its range of products, can be found in more than 6,000 points of sale comprehended in the largest distribution chains in the country and it is now starting an unprecedented internationalization stage. Our distinguishing features -constant innovation, good value for money, guaranteed profitability, creative marketing and after-sales service- have been exceptionally received by our customers. Blusens compromise to continuously improve the product quality and the customer service is mirrored in the creation of our own Support Centre located in Santiago de Compostela, Spain, with a Call Centre where all the customers’ calls are directly received and dealt with in order to provide a better and faster response to Blusens product users. INNOVATION: R&D Constant innovation is one of the pillars of Blusens’ success. That is the reason why we have increased the investments in Research, Development and Innovation up to exceed 10% of the estimated annual turnover. These investments have culminated in the creation of our own research team made up by over 35 people. Such a commitment with innovation has fostered the creation of groundbreaking new products such us the G01, the first European GPS navigator that uses pictometry, the web:tv, a powerful internetTV server and home entertainment controller, the integration of IPTV protocols over power line... These advanced products provide a powerful statement that says that technological breakthroughs can be born, developed and implemented in Spain. Innovation is the aspect that more clearly defines our Marketing strategy. Blusens has always been characterized by a creative and aggressive Marketing, with actions often associated with large conglomerates. Blusens innovative and creative strategies have made a deep impression in the field, revealing the firm as a company always on the look-out for different mediums and strategies with the aim of providing freshness to our Marketing. In line with our young, vibrant and restless image, we are sponsors of Miss Spain Pageant, which has associated our brand with the world of Fashion, we also sponsor the Blusens MotoGP Team, a promising endeavour that supports young and bright new pilots who are already making a dent in their championships, and the Spanish Professional Blusens Basketball Team. Further to these efforts, we have thrown ourselves into the virtual world of social networking with our BlusensTV one2one community, Blusens Music Digital music label and many other initiatives that keep us in the forefront of technology, communication and marketing while closing the gap between the user and the brand. Our next step was the implementation of our young and forward looking mindset on the export markets. Starting in Dubai (2007), we have embarked in a very aggressive globalization campaign under the same motto that made Blusens successful in Spain. That is being young, fresh, reliable, innovative and, most of all, closing the gap between the brand and the user. Today we are present in China (2007), Middle East (2007), Mexico (2008), Uruguay (2008) and Brazil (2012). We continue to strive and develop ever more technological products by launching our new communications line in which we have taken a new step in the horizontal integration by developing HDTV distribution systems via IP and coaxial cable. Having a fare presence in the GCC area our systems are installed in a wide variety of projects and developments. From Luxurious hotels like the Vision Hotel in Abu Dhabi, Diva Hotel in Bahrain, Lamborghini Hotel in Syria, Ramada Hotel in Bahrain, Millenium Hotel in Kuwait, Bayan Palace in Kuwait and the New Terminal of Jeddah Airport in Saudi Arabia to universities like Princess Noura in Saudi Arabia and mega projects like the Reemram project in Dubailand, Dubai. Our commitment to QC and continuous R&D, along with a focused customer service philosophy guarantee the performance and reliability of our systems. Capable now, as we are, of designing and implementing HDTV systems that range from the small single apartment to the most luxurious hotel complex or cable TV operator... We will stretch ever more to become the reference in innovation, technology, marketing and customer service. We can afford to be unique, different. To be Blusens. catalogoBlusensIPTV_2014DEF.indd 2-3 04/03/14 11:29
  3. 3. table of contents 5 www.blusensnetworks.com IPTV 7 · What is IPTV? 9 · What can IPTV do for you? 11 · What can Blusens do for you? 16 · IPTV Concepts 17 · IPTV Components 19 · System Architecture 20 Middleware 23 · Middleware Nodes 24 · Management Interface 27 · Software Licenses 31 Set Top Box 35 · High definition STB 36 VoD Streaming Cluster 41 · Storage nodes 42 · Streaming nodes 45 · Optional Features 47 IP Contribution Head-end 49 · Digital Contribution 50 · Analog Contribution 54 Net PVR 57 · Net PVR 58 DIGITAL SIGNAGE 61 · What is Digital Signage? 62 · What can Digital Signage do for you? 63 DS Servers 71 · Playout Server 72 · Signage Server 73 Channel Generators 77 · High Connectivity 78 · Low Connectivity 79 FACIAL RECOGNITION 81 · What´s Facial Recognition? 83 · Technical Specifications 84 TECHNICAL SPECIFICATIONS 87 · MPEG-2 Profiles and Levels 88 · Glossary of Measurements 88 · Network Technologies 89 · H.264 Profiles and Levels 90 · Wiring 92 · Cable Recommendations 93 catalogoBlusensIPTV_2014DEF.indd 4-5 04/03/14 11:29
  4. 4. IPTV catalogoBlusensIPTV_2014DEF.indd 6-7 04/03/14 11:29
  5. 5. IptVIptV 98 www.blusensnetworks.com The development of new technologies over IP Networks continues to contribute to the integration of a variety of services. These expand from the basic Ethernet network for computer interconnection, to DSL lines for internet access, IP telephony or the most advanced automation and control systems. The advantage of a standard communication technology over a single network allows the simplification of the cabling network, enables the integration of varied services, which guarantees the compatibility with future technological developments, and facilitates the monitoring, security and control of any installation. Internet Protocol Television (IPTV) is one of the services that now can also integrate with the structured cable network of a building. Such revolutionary change in the way TV signal is distributed significantly improves the signal quality, interactivity and control, giving the operators a plethora of options to monitor, add services, maximize audience and improve the return on the investment. IPTV Standard Platform The cooperation between Interoud and Blusens, as software and hardware developers, has resulted in the birth of a true NEXTGEN IPTV system that is able to fulfil every requirement the Operator may need. From standard TV channels distribution, to HDTV, Video-on-Demand, Time-shift, personalized advertisement schemes and sponsorships, direct purchase from the TV, Digital Signage and more. WhaT Is IPTV? Such solutions play a very important role in the hospitality sector as they provide the tools to increase the comfort level of their guests/patients, as well as the overall revenue. With this IPTV system, the hotel can offer enhanced entertainment services at a Premium, increase the availability of other hotel services (Room Service, Laundry, Restaurant Reservations, Spa, Sports activities, Gift Shops, etc.) while getting valuable data as to what their guests are watching, what channels are popular, what content type gets the most income, what hotel services have more demand, etc. Thus, IPTV by Blusens provides a true added-value tool to the operator that will, unobtrusively and reliably, increase the revenue on a system that otherwise only represents an added cost. catalogoBlusensIPTV_2014DEF.indd 8-9 04/03/14 11:30
  6. 6. IptVIptV 1110 www.blusensnetworks.com WhaT can IPTV do for you? HOSPITALS Added to the general Hospitality functionality, IPTV can record, and make available to the user network, any workshop, lecture, seminar or procedure carried out in the facility, thus enhancing the practise and resources available to the Hospital. The offer to the patient can even include the meal selection from his physician’s approved menu. HOTELS, RESORTS, COMPOUNDS, RESTAURANTS The complete solution offers a centralized point to control and monitor the guest’s consumption and usage of the entertainment system, providing useful statistics that can be used to tailor make the packages offered based on their origin, age group, income, occupation, etc. The On-Demand content and some LiveTV chan- nels can be offered in various languages and with captions to provide the closest sensation to a Home Cinema that a hotel can offer, while giving the Operator a variety of tools to insert various types of advertising formulas. All fully linked to the central Building Management System. Billing is, thus, seamlessly integrated. CORPORATE OR GOVERNMENT NETWORKS The integration of the video streams in an existing IP infrastructure makes possible the reception of any content on any facility, even on mobile devices. With an IPTV platform all the multimedia content generated in courses, seminars or master lectures can be recorded and redistributed live during the event or later, to feed STB, PCs inside the complex, Digital Signage panels or via an internet web portal. EDUCATIONAL FACILITIES Using the Corporate services as a base, an education institution may be interested in adding notes to the video or a real time messaging feature to allow the users watching a live event like a surgery to share opinions and comments with other users. CABLE TV OPERATORS IPTV by Blusens full-fledged solution enhances the services the operator can provide as it is fully interactive in every possible way. Direct TV purchase becomes a true reality for varied forms of products and services. Also, it allows the creation of Portals for different On-Demand content, Pay-per-View, and Live events. Our system enhances the data gathering of user consumption, enabling the use of complex statistics that will serve as a tool for continuous improvement and detection of overlooked niche markets. catalogoBlusensIPTV_2014DEF.indd 10-11 04/03/14 11:30
  7. 7. IptVIptV 1312 www.blusensnetworks.com PVR •  Time Shifting support enables the user to pause live contents and resume it later. •  CatchUP TV allows the guest to watch a content from the beginning. •  NetPVR makes possible to watch on demand contents that were broadcasted in the past. •  Manual recording schedule managed from the STB. •  Complete integration with EPG. •  Possibility of recording in external usb key or netPVR server. WELCOME SCREEN •  Welcomes the guest when he arrives to his room for the first time. •  Name of the guest. •  Check in and out dates. •  Welcome TV channel in the language of the guest. •  The channel can be a live TV or a playout channel. MAIN MENU •  All the menus and descriptions in the mother tongue of the guest. •  Main services easily accessible from the main menu. •  Help. WATCHING ON DEMAND TV •  Browse through content categories, subcategories, individual content titles and their synopsis. •  Suggestions, popular contents, etc. •  Browse the active rentals and rental history. •  Full control: play, pause, stop, fast forward & rewind at several speeds. •  Parental control available. APPS •  Increases the capacity of the STB via external applications. •  Third party API available to develop specific applications for the platform. •  Multitasking support. •  The A/V content is not interrupted by using an app. SPONSORSHIP & TELETEXT •  Sponsor logos on the Menu System. •  Banners on different sections and areas of the screen. •  Static and dynamic text and graphical banner options. •  To be defined based on customer needs. WATCHING LIVE TV •  Complete EPG to help the user to find the desired program. •  Both Live TV and playout channels. •  Program search. •  Check metadata information. •  Channel view and calendar view. •  Navigate channels through the mini- guide. •  Advertising capabilities (static banners, dynamic banners, RSS feeds…) •  Channel change under one second. •  Miniguide allowing a fast, smart zapping. catalogoBlusensIPTV_2014DEF.indd 12-13 04/03/14 11:30
  8. 8. IptVIptV 1514 www.blusensnetworks.com INFORMATION PAGES •  Suitable for displaying local information about the hotel, the city and its surroundings. •  Predefined library of styles and layouts. •  Easy edition of the content, no HTML needed. •  Easy addition of pictures used to illustrate the page. •  Easy sorting of pages according to assigned categories into menus and submenus. CITY INFORMATION •  Shopping malls list. •  Tourism points of interest. •  Recommended Restaurants. •  Pharmacies. •  Unlimited possibilities... HOTEL INFORMATION •  Emergency telephones. •  Hotel telephone extensions. ROOM SERVICE & e-SHOPPING •  Food ordering direct to the kitchen printer. •  Laundry request with specification of the clothes rent. •  Housekeeping. EMERGENCY •  Alarm message on every screen. •  Centralized control. •  Evacuation map. •  Once the alarm has been triggered, the middleware locks the STB interactivity, the guest can not override the message. •  Automatic volume rise. GAMES AND SERVICES •  World Time clock. •  Shows the different GMT zones. •  Daylight saving control. •  Currency exchange helper. •  High quality games. BILLING •  Shows the bill with real-time information coming from the hotel PMS. •  The platform has its own minimal PMS system for hotels without a third-party PMS. •  Possibility of accepting the bill for express check-out. MESSAGING •  Text messaging from hotel desk to the guest room. •  Text messaging from the guest room to the hotel desk. •  Optional text messaging between rooms. NEWS •  Integration of real time RSS news feeds. •  Chronological sorting of the latest news. INTERNET •  Internet Browsing. •  Advanced Java Script Support. •  Full featured Web Browser. WAKE UP CALL •  Selection of TV or Radio Channel used as Wake Up channel. PIN CODE •  Possibility of protecting the access to certain services via pin code. catalogoBlusensIPTV_2014DEF.indd 14-15 04/03/14 11:30
  9. 9. IptVIptV 1716 www.blusensnetworks.com WhaT can Blusens neTWorks do for you? Blusens is your One-Stop Shop for any IPTV requirements, providing a wide and scalable range of products, solutions and content that will fit every sized project: •  Latest generation technology for hospitality and cable TV environments based on Blusens Technologies devices and Interoud platforms that provide a full end-2-end solution. •  Immediate consultancy and maintenance services throughout the life cycle of the project from inception to execution and operation. •  Wide international experience to help define appropriate requirements and commercial services. IPTV concePTs On Demand Media Bitrate Bandwidth consumed by each stream transferred through the network. 5Mbps is the same quality as the live television channels coming from the satellite. 8 to 12Mbps are required for HD content. Number of on Demand Media Number of demand contents (i.e. movies or videoclips) stored in the VoD storage node server. Each content can be watched simultaneously by an undefined number of users with a single copy of the content on the server. Unicast Traffic Communication between one origin and one destination. Used when one stream per user is required, for example in VoD streams. Multicast TrafficCommunication between one origin and several destinations. sed when the same stream can be delivered simultaneously to several users, for example in LiveTV streams. Multicast Traffic Communication between one origin and several destinations. Used when the same stream can be delivered simultaneously to several users, for example in LiveTV streams. Playout Channel Live channel generated from local stored contents. For example advertising videos of the hotel or a recent movie in a continuous loop. Both live and playout channels will be treated the same way by the middleware. Playout channels are also Multicast traffic.Middleware Core of the system. Orchestrates interactions with every other part of the IPTV platform. It manages the access rights to LiveTV channels, movies or sections for specific users. It also manages the interaction with the hotel PMS system for pay per view purposes. Number of Users It refers to the number of STB to consider. Each STB will be capable of playing one content independently from the others. One STB per TV screen is required. Live Channel Stream coming from the satellite dish or any broadcast technology like DTT. Usually a TV or radio channel. A channel coming from a CCTV IP camera is also considered a Live Channel. Live channels are Multicast traffic. Video on Demand. VoD Interactive video delivery technology which allows each user to be provided with its own video stream, as if it were coming from a local DVD player. The user can pause, fast forward, rewind, etc. the movie at several speeds without interfering with the video beign watched by other users. VoD is unicast traffic. Set Top Box. STB Device used to decode IP video streams delivered through the network in a format suitable for being watched in a standard TV Set. Is also responsible of displaying the menus used to browse all the contents of both VoD and LiveTV media library as well as the interactive info pages. IPTV Contribution System Equipment responsible of tuning live TV or radio streams and its injection into the IP network. Maximum Concurrency Represents the maximum number of users expected to be consuming VoD contents at the same time with a percentage (notice that there’s no limitation on concurrent users for Live or Playout channels as concurrency applies only for VoD) IP RF Expandable in number of services Yes Limited Expandable in number of users Yes Limited HD capabilities Yes No Interaction with other systems (telephony, internet…) Yes No Availability of VoD Yes No Interaction with PMS Yes Limited Recording and time shifting Yes No Network Monitoring Yes No Access restrictions and parental control Yes No Hotel interface personalization Yes Limited Multi-language capabilities both on the interface and on contents Yes No Flexible pricing for different contents Yes No Contents categorization Yes Limited Remote centralized control of the STBs Yes No In-line editing of local information pages Yes Limited Messaging capabilities Yes Limited Dynamic banner facilities Yes Limited Emergency alerts and warnings Yes Limited Several services over the same cabling network Yes No Easy integration with several required services Yes No catalogoBlusensIPTV_2014DEF.indd 16-17 04/03/14 11:30
  10. 10. IptVIptV 1918 www.blusensnetworks.com IP CONTRIBUTION Performs the tuning of Live satellite video streams and its conversion into IP streams. One DVB-S module can tune all the channels in a transponder simultaneously Responsible of channel descrambling when necessary Each CAS module can descramble several channels MIDDLEWARE Core of the IPTV system. Manages interactions between each part of the system. Menu generation Content authorization Billing and PMS integration Statistics collection Media cataloging EPG generation VoD CLUSTER Serves individual and independent video streams to each user. Each stream is unique for each user Manages behavior of VCR controls Fast Forward Rewind Pause VCR operations performed at several speeds Stores contents to be streamed Stores metadata for this contents Controls the bandwidth for each stream ROUTERS AND SWITCHES Carries IPTV info packets to the correct destinations. Each one acts as a repeater so there is no attenuation of signal Responsible of broadcast and multicast replication of streams IPTV comPonenTs NET PVR Stores cyclic recordings for several days of Live TV Channels or CCTV Cameras. Live Archive The recordings can be accessed later so one user can watch what was on certain channel on certain moment in the past The user is not tied to the broadcast scheduling anymore STRUCTURED NETWORK CABLING Performs the connections between servers, routers, switches and STBs. Maximum length of each connection: 100 mt. The network is divided in a hierarchical way The switches can be cascaded The network has star shape, not bus shape PLAYOUT SERVER Generates multicast Live channels with local contents according to a time schedule. Suitable for advertising channels, local promotion or pay per view movies Seamless splicing allows to smooth the transition between two videos to avoid video noise SET TOP BOX Decodes the IP audio/video streams for playing it in a standard TV set. Generation of the GUI Manages interaction with the user Keyboard Remote control Can be remotely controlled via the middleware catalogoBlusensIPTV_2014DEF.indd 18-19 04/03/14 11:30
  11. 11. IptVIptV 2120 www.blusensnetworks.com 1. The VoDKAST Middleware server creates the STB menus by accessing the metadata information of the videos from the VoD cluster (movie name, actors, director, etc.) and the EPG information from the live and playout channels while considering the user access rights and credit information obtained from the PMS. Thus, the menu is customized for each guest. 2. The hotel operator can fine tune the platform through the management console. The Middleware Server also monitors the current state of each part of the system and triggers the proper alerts to the management consoles in case of any problem. 3. The VoD Streaming Cluster stores all the videos in its storage nodes and streams it to the network through the streaming nodes. The platform allows an unlimited number of streamer and storage nodes to increase the storage or streaming capacity independently from each other according to the operator needs. 4. The IP Contribution System obtains the live DVB-S, DVB-C and DVB-T MPEG-2 streams from satellite, cable or terrestrial feeds and injects them into the IP network as IP multicast streams. 5. The Playout Server generates continuous loop streams of stored contents as IP multicast streams. 6. The NetPVR server stores local recordings of live TV channels to provide time-shifting features to the platform. 7. The Digital Signage server controls the digital signage screens and split its layout in several regions that can be filled with any multimedia content, even Adobe Flash. 8. The Ethernet Switches aggregate the outputs of all the servers and carry the video streams to the screens through the IP network. 9. The integrated solution allows several types of STB and screens working together: Standalone STB screen, Standard PCs screens and Low or High Connectivity Digital signage screen. Any IPTV content (live, playout, VoD, etc.) can be displayed in any of the STB types. sysTem archITecTure IPTV Architecture Graphic catalogoBlusensIPTV_2014DEF.indd 20-21 04/03/14 11:30
  12. 12. middleware catalogoBlusensIPTV_2014DEF.indd 22-23 04/03/14 11:30
  13. 13. mIddlewaremIddleware 2524 www.blusensnetworks.com mIddleWare nodes The middleware server is the core of the Blusens IPTV solution. It controls the interaction between each part of the system and the interaction of the system itself with the rest of the hotel services. It is also the entry point for the hotel operator, where he can check the status of the network, the connected STB, trigger alerts to pop up in one or a group of STB etc. VoDKAST will generate menu screens for browsing all the media library in an integrated way. The interface is coherent among all the applications of the system (i.e. TV, VoD, NetPVR, services). It’s also able of providing screens with local information of the hotel and surroundings. This information screens are very simple to create and edit via collection of templates that the operator can modify online through the management interface. All the modules of this middleware are multilingual and can support any language with any font, for example, Arabic. The VoDKAST middleware provides mechanisms to interact with several hotel services (room service, laundry, housekeeping, etc…) providing direct communication with the departments where this services are stored and being able also to print text messages with the service required. VoDKAST has the ability of overimpressing banners over the video of all or only some of the Set Top Boxes. It’s also able of blocking the ability of override the message by locking remotely the IR control of the STB. The middleware nodes are the servers that conform the middleware cluster. Depending on the number of users the middleware can be a single server or a cluster of multiple machines working together to provide unlimited growing capabilities to the platform. In hospitality environments a cluster of nodes is rarely required, but, in other case scenarios, like telco operators for example, this requirement becomes more common. Please ask your sales representative to give you more information about the telco approach for larger installations. The middleware nodes are built with the lastest and highest quality components sharing the group of features that configure them as high reliability “state-of-the-art” ones. •  Up to 500 middleware users. •  Intel Xeon Dual core processors. •  2GB 800Mhz FB-DIMMs RAM. •  2 RAID 1 mirrored 250Gb Hard disks. •  4 x Gigabit Ethernet network interfaces. •  Optional 10 Gigabit Ethernet interface. 500 User standalone mIddleware node 2000 User clUstered mIddleware node This node is focused in providing the middleware for small/medium sized installations. With its two dual core processors, this server is able of managing up to 500 users concurrently. The RAID1 mirroring between the two 7200rpm SATA hard disks guarantees the lowest cost per GB of storage space and reveals this unit as a high reliability one. The 1RU form factor highlights this server as one of the most dense ones in what is referred to number of users per RU. IM.1500 IPTV Standalone Middleware for 500 users This node is aimed to provide a solution for larger deployments such as cable operators, universities, etc. Due to its clustering approach this nodes allow unlimited growing capacity via clustering. This servers are capable of working together to provide one middleware controlling an unlimited number of users. With its cluster approach, a system created with this nodes can integrate spare servers that are automatically hot swapped when an anomaly occurs without service interruption. IM.12000 IPTV Clustered Middleware for 2000 users •  Up to 2000 middleware users per node. •  Intel Xeon Quad core processors. •  4GB 800Mhz FB-DIMMs RAM. •  Up to 4 RAID 1+0 mirrored 250Gb Hard disks. •  4 x Gigabit Ethernet network interfaces. •  Optional 10 Gigabit Ethernet interface. IM.1500 Architecture Processor One or Two Quad-Core Intel Xeon L5420 Processor, 2.50 GHz, 1333 MHz FSB, 50W. Cache Quad Core Processors: 12 MB L2 cache per core Main memory DIMM Slots Memory Type Up to 32 GB of 800 MHz ECC FB-DIMM or 667 MHz ECC FB-DIMM Memory Configuration 4 GB total memory. System configurations from 1 GB up to 32 GB Graphics Controller ASPEED AST2000 System architecture Intel Quad Core technology Standard/integrated interfaces Network: Four Integrated 10/100/1000 Base-T Ethernet ports Management: Service processor with embedded Lights Out Manager (LOM) standard Serial: RJ-45 SATA: Up to two hot-pluggable SATA bays, 2 TB max. USB: Five USB 2.0 ports (two front, two rear, one internal) Expansion bus: One PCIe slot (x16 electrical/x16 mechanical), half-length, half-height Software Operating systems Solaris OS 10 or GNU/Linux IPMI 2.0 compliant Service Processor with embedded. Lights Out Management offering remote power, KVM (keyboard, video, mouse) and media capability Mass storage and media Internal disk option Two hot-pluggable 250-750 GB 7200 rpm 3.5” SATA II HD Removable Media Up to one EIDE DVD-ROM or DVD+/-RW DL drive RAID RAID 1 hardware mirroring to provide fault tolerance Environment Operating temperature: 5° to 35° C (41° to 95° F) at sea level Non operating temperature: -40° to 68° C (-40° to 154° F), up to 93% relative humidity, non condensing, 38° C max. wet bulb Operating altitude: Up to 3,000m (9,000 ft.), max. ambient temperature is derated by 1° C per 300m above 900m Non operating altitude: up to 12,000m (=~36,000 ft.) Acoustic noise: 70 dBA operating, 69 dBA idle (declared noise emissions in accordance with ISO 9296 A-weighted, sound power) Power Single PSU AC power: 100–240 V AC (47–63 Hz) Regulations Safety IEC 60950, UL/CSA 60950, EN 60950, CB Scheme with all country differences RFI/EMI FCC CFR 47 Part 15 Class A, EN 300 386 v1.3.3, EN 55022 Class A, EN 61000-3-2, EN 61000-3-3 Immunity EN 55024, EN 300 386 v1.3.3 Certifications Safety CE, CB Scheme, UL, CSA, CCC, BSMI, AR-S, GOST-R EMC CE, FCC, VCCI, ICES, BSMI, CCC, MIC, C-Tick, AR-S, GOST-R Other RoHS-compliant labeled, per WEEE (Waste Electrical and Electronics Equipment) Directive (2002/95/EC) Dimensions and weight Height 44 mm (1.7”) Width 425.5 mm (16.8”) Depth 633.7 mm (25”) Weight 13.3 kg (27.2 lbs.) Warranty One year, next business day Hardware Specifications may change without prior notice. catalogoBlusensIPTV_2014DEF.indd 24-25 04/03/14 11:30
  14. 14. mIddlewaremIddleware 2726 www.blusensnetworks.com IM.12000 Architecture Processor Two Intel Xeon processors 5500 series Cache Level 1: 32 KB instruction and 32 KB data L1 cache per core Level 2: 256 KB unified (data and instruction) L2 cache per core Level 3: 4 MB or 8 MB shared inclusive L3 cache per processor Main memory 12 DDR3 DIMM slots (six DIMM slots per CPU socket); system supports from 2 GB (1x 2 GB to 96 GB (12x 8 GB) of memory System architecture Based on Intel Xeon processor 5500 series and Intel 5500 Chipset Standard/integrated interfaces Network: Two 10/100/1000Base-T Ethernet ports Serial: One RJ-45 port USB: Five USB 2.0 ports (two front, two rear, one internal) Expansion bus: One PCIe 2.0 slot (x16 electrical/x16 mechanical, low-profile) Software Operating systems Solaris 10 OS OpenSolaris™ OS Red Hat Enterprise Linux 4 Red Hat Enterprise Linux 5 SUSE Linux Enterprise Server 10 VMware ESX 3.5 Windows Server 2003 Standard/Enterprise Editions Windows Server 2008 Standard/Enterprise Editions Windows Server 2008 Standard/Enterprise/ Datacenter Editions Networking Two GbE ports integrated on motherboard Management Optional Sun Integrated Lights Out Manager (ILOM) service processor module – VGA 8 MB: 1,024x768 at 60 Hz – Management port: One 10/100 RJ-45 port Enables remote power control; remote keyboard, video, mouse (KVM) graphical access; and remote media (DVD, CD, floppy) Secure remote access using Web interface over SSL, or CLI over SSH Sun™ xVM Ops Center software support IPMI 2.0, SNMP v1, v2c, and v3 In-band, out-of-band, and side-band remote management Mass storage and media Internal disk option Up to four hot-pluggable 3.5 in. SATA disk drives, 4 TB max.: 1 TB, 500 GB (7,200 rpm) Up to four hot-pluggable solid-state drives (SSDs), 128 GB max.: 32 GB3 Up to two Sun Flash Modules, 48 GB max.: 24 GB3 IM.12000 Environment Operating temperature: 5° C to 35° C (41° to 95° F) at sea level Non operating temperature: -40° C to 68° C (-40° to 154° F) Operating relative humidity: up to 93%, non condensing, 38° C max. wet bulb Non operating relative humidity: Up to 93%, non condensing Operating altitude: Up to 3,000m (9,000 ft.), max. ambient temperature is derated by 1° C per 300m above 900m Non operating altitude: 10,000m (35,000 ft.) Acoustic noise: 7.5 B operating, 7 B idling / 70 dBA operating, 60 dBA idle (declared noise emissions in accordance with ISO 9296 A-weighted, sound power) Power Single non redundant power supply; max. power supply rating 600 W at >80% efficiency AC power: 100–240 V AC (47–63 Hz) Regulations Safety IEC 60950, UL/CSA 60950, EN 60950, CB Scheme with all country differences RFI/EMI FCC CFR 47 Part 15 Class A, EN 300 386 v1.3.3, EN 55022 Class A, EN 61000-3-2, EN 61000-3-3 Immunity EN 55024, EN 300 386 v1.3.3 Certifications Safety CE, CB Scheme, UL, CSA, CCC, BSMI, AR-S, GOST-R EMC CE, FCC, VCCI, ICES, BSMI, CCC, MIC, C-Tick, AR-S, GOST-R Other RoHS-compliant labeled, per WEEE (Waste Electrical and Electronics Equipment) Directive (2002/95/EC) Dimensions and weight Height 43mm (1.7 in.) Width 436mm (17.2 in.) Depth 650mm (25.6 in.) Weight MIN 9.8 kg (21.7 lbs.) MAX 13.9 kg (30.6 lbs.) Mounting option Rackmounting slide rail kit Toolless rackmounting slide rail kit Cable management arm Warranty One year, next business day Hardware Specifications may change without prior notice. managemenT InTerface The LiveTV and playout channels can be shown or hidden to certain STB or rooms. It’s numbering can be easily resorted and, if provided by the operator, teletext and subtitles are fully supported. The contents can be marked with any tag defined by the administrator, like action, High Definition, Music Video, Documentary, advertisement, Black and White movie etc. The middleware allows the administrator to sort this tags in any menu/submenu configuration, so browsing thousands of contents is very comfortable. The price ruling system is very flexible, allowing the hotel to provide different prices according to categories like movie genre, director, length, etc. The system provides a price simulator to check the price charged for the movie to the guest for a particular situation. catalogoBlusensIPTV_2014DEF.indd 26-27 04/03/14 11:30
  15. 15. mIddlewaremIddleware 2928 www.blusensnetworks.com The administrator is capable of monitoring what is being played in any room at each STB for any given moment. It’s also capable of rebooting a group or a single STB or even forcing it to tune a specific channel or content and locking the IR control of the STB. The administrator can check the current billing for any given STB or room at any moment. The logging system is continuously monitoring the status of the system an can provide alerts when a STB is disconnected from the network or a live TV channel is not receiving content. This prevents any unauthorized access to the distribution network. The middleware is also capable of gathering use statistics for both VoD and live contents. The price of the media contents are determined by a very flexible price rule mechanism. This provides the operator the flexibility of grouping some channels into one pack and price it. The price rules are also defined according to a calendar, so creating an “action weekend offer“ is very simple. catalogoBlusensIPTV_2014DEF.indd 28-29 04/03/14 11:30
  16. 16. mIddlewaremIddleware 3130 www.blusensnetworks.com The edition of the local information pages is very easily done via the web interface. The administrator does not need any programming or web developing knowledge to create high quality local information pages. It’s possible to select an specific welcome TV channel according to the nationality of the guest. If the nationality is not registered in the system the welcome channel will be the default one. It’s also possible to run a specific advertisement as welcome video in the mother language of the guest. The system supports any language in every part of the system: The interface in the STB, the management interface, and even the names of the tags can be internationalized. This way the system recognizes that the “Action movies” will we shown as “Peliculas de accion” for an Spanish speaker. sofTWare lIcenses The system can be integrated with the PMS that is part of the IT infrastructure of the hotel. This way the hospitality system is able to generate per-user contents with the information acquired from the PMS. This service will be used for automatic charging the costs of the film rental or whatever pay service that the hotel must decide to implement on the billing of the customer. If the connection with the PMS system is not available for whatever reason, VoDKAST includes a minimal PMS for this purpose. The system also includes applications for viewing the billing of the user from the comfort of the room. pms IntegratIon User Interface modIfIcatIon deVelopment of specIfIc applIcatIon The graphical interface of the IPTV system for the rooms can be completely customized to the needs of the customer. Custom logos, colors and even menu elements can be integrated in the user interface to provide a coherent, tailor made visual language with the rest of the systems in the hotel, hospital, university, etc. As the system proposed is a 100% end2end solution, any added value application designed specifically to fit the customer needs can be integrated in the menus of the STB. The flexibility is almost unlimited. Contact with a sales manager to evaluate the viability of a custom development for your needs. catalogoBlusensIPTV_2014DEF.indd 30-31 04/03/14 11:30
  17. 17. mIddlewaremIddleware 3332 www.blusensnetworks.com VodKast mIddleware pUlsar dIgItal sIgnage VTV-MID-1.0 VoDKAST Middleware Base License Middleware base license. Provides basic services as STB monitoring VTV-LTV-1.0 VoDKAST Middleware LiveTV option Upgrades the middleware with live TV channel management capabilities. VTV-STB-1.0 25 STB Base license Base license for a package of 25 STB VTV-SAP-1.0 25 STB Simple applications license Upgrades the STB basic license with capabilities required for TV zapping, EPG browsing or decoding of a Digital Signage channel. Not required if a VTV-AAP-1.0 advanced applications license is present. VTV-AAP-1.0 25 STB Advanced applications license Upgrades the STB basic license with hospitality capabilities, wake-up alarm, billing check, etc. Includes the VTV-SAP-1.0 basic applications license. VTV-IAP-1.0 25 STB Internet Applications license Upgrades the STB basic license with internet browsing capabilities, RSS feeds, weather, etc. VTV-VOD-1.0 25 STB Video on Demand support license Upgrades the STB basic license with Video on Demand capabilities for videoclub purposes. VTV-PVR-1.0 25 STB netPVR license Upgrades the STB basic license with network PVR capabilities for recording purposes. VTV-DSM-1.0 VoDKAST Digital Signage Module Upgrade Upgrades the middleware with both high and low connnectivity Digital Signage management capabilities VTV-DSC-1.0 VoDKAST Digital Signage Channel Upgrade Adds one Digital Signage High Connectivity Channel to the middleware. Requires a middleware with digital signage module (VTV-DSM-1.0) installed. VTL-FUL-1.0 VoDKAST Lite Base license Full VoDKAST middleware license for a maximum of 15 users. VTL-DEM-1.0 VoDKAST Lite Demonstrator Full middleware HW+SW bundle limited to 10 users. PDS-BAS-1.0 Pulsar server license Standalone Digital signage server base license. Not required if a Vodkast Middleware (VTV-BAS-1.0) with digital signage module upgrade (VTV-DSM-1.0) is present. PDS-MUL-1.0 Pulsar server multi organization option Upgrades the Pulsar Digital Signage server with multi-role, multi organization capabilities. Allows the management of several Digiltal Signage networks with the same server. Allows the management of certain elements of the digital signage schedule/templates to third party subsidaries. PDS-LCX-1.0 Pulsar low connectivity channel generator license (< 10) Low connectivity channel generator license, price per unit if less than 10 units. PDS-LCL-1.0 Pulsar low connectivity channel generator license (< 50) Low connectivity channel generator license, price per unit if less than 50 units. PDS-LCC-1.0 Pulsar low connectivity channel generator license (< 100) Low connectivity channel generator license, price per unit if less than 100 units. PDS-LCM-1.0 Pulsar low connectivity channel generator license (> 100) Low connectivity channel generator license, price per unit if more than 100 units. PLT-BAS-1.0 Pulsar Lite Digital signage system Low connectivity digital signage server and channel genrator for small deployments. Up to 10 low connectivity lite channel generators (PLT-EXT-1.0) are suported PLT-EXT-1.0 Pulsar Digital Signage Lite extended channel generator Upgrades a Pulsar Lite Digital signage system (PLT-BAS-1.0) with an extra low connectivity channel generator. Up to 10 channel generators are supported. VTV-PMS-1.0 IPTV Middleware PMS integration Option Upgrades the middleware with integration with a third party PMS system such as Micros Opera. professIonal serVIces LMB-INT Integration and tests Installation of the software licenses in the server and STBs and configuration of the final system adapted to the destination network LMB-SUP One year second level support Provides 12x5 (more schemas available) telephonic hotline for fixing any issue with the platform via a remote vpn. I also includes continuous monitoring of the health of the systems, cloud backup of the configuration and periodic preventive maintenance tasks of the servers from our support team. LMB-TRG Training Course Half day in-house training course for the software products of the platform. Travel expenses excluded. catalogoBlusensIPTV_2014DEF.indd 32-33 04/03/14 11:30
  18. 18. settopbox catalogoBlusensIPTV_2014DEF.indd 34-35 04/03/14 11:30
  19. 19. set top boxset top box 3736 www.blusensnetworks.com •  High Definition DVB-T Tuner (MPEG4/H264 and DVB-T MPEG2 definition. •  High definition Matroska MKV/H264 files playback. •  Full HD (supports 1080p – 24fps) •  USB 2.0 Host port. •  EPG, Parental channel control, teletext and timer. •  Allows channel sort. •  Recording: directly or programmed. •  Rename/Delete records. •  Delete files. •  Timeshift. •  Multilanguage OSD menu. •  Customized for Iranian Market. hIgh defInITIon sTB The STB is the device in charge of decoding IPTV streams to display them in a standard TV set. Blusens STB includes the state-of-the-art technologies to provide the ultimate end user experience in terms of speed and interactivity with the IPTV system. It features HD capabilities up to 1080p with H.264 video and 5.1 optical audio output while providing a minimal lag between channel zapping. t.14+ T.14+ Multimedia DVB-T HDTV TUNER High definition DVB-T (MPEG4/H264), able of playing high definition Matroska MKV/H264 and compatible with Full HD (1080p - 24fps). Compatible with multiple multimedia formats and allows AV and component outputs including HDMI high definition output. Allows recording from conventional & HD DVB-T, recording all audios and subtitles.Timeshift function incorporated. webtV IP-14.1/WebTV IP/OTT Set Top Box WebTV is a sophisticated Multimedia Center with the ability to manage, play and distribute audiovisual contents coming from Digital Terrestrial Television, Internet, WiFI connectivity or external audio, video or storage sources. Allows the connection with Internet TV platforms (OTT), IPTV and RSS’s thematic service access and other applications. Conectivity with wireless networks (802.11g) up to 54Mbps and Ethernet Networs 10/100Mbps. •  Compatible with Internet TV (OTT). •  IPTV server and player. •  HD Media Player. •  Allows new application installations. IP-14.1/WebTV Dimensions 13 x 12 x 4 cm Weight 230 gr USB 2 USB Host Ports (USB 2.0) Compatible Devices USB Storage Devices Video Outputs Composite Component S-Video HDMI v1.2 Audio Outputs S/PDIF (optical and coaxial) 2 composite Network Connection Ethernet 10/100 Mbps WLAN 802.11b/g up to 54Mbps and Ethernet Compatible formats Video ASF, AVI, MP4, MPEG ES/PS/TS and Matroska (MKV) Image BMP, GIF, JPEG, JPG, PNG Audio MP3 and WMA Compatible Codecs Video MPEG-1, MPEG-2, MPEG-4, WMV9, VC-1, MPEG-4.10 (H.264), DivX Audio MP3, AAC, MPEG-1 Layers I, II and III (MP3) 2.0, WMA9 Subtitles Files “.srt” Client UPnP, NFS, Samba Streaming Protocol HTTP, MMS (MMS-T), MMS-H and RTSP T.14+ Dimensions 219 x 135 x 38 mm Weight 400 gr USB USB Host 2.0 Port High Speed Video Outputs Composite YPbPr Component HDMI 1.3 High Definition (Full HD 1080p Supports) Audio Outputs Stereo RF antenna in IEC connector + loopthrough output Compatible formats Video MPEG 1-2, MPEG 4.2-XVID, MPEG AVC 4.10 H264, MPEG 4.14 NERO DIGITAL, AVCHD Image JPEG, BMP and PNG Audio MP3, AAC, WMA Containers AVI, MP4, MPG, VOB, TS, TP, MKV, MP3, AAC, M4A, WMA, MOV, M2TS Compatible USB drives 2GB, 4GB, 8GB, 16GB, 32GB FAT32/NTFS 128GB, 256GB, 500GB, 1TB, 1.5TB Hardware Specifications may change without prior notice. Hardware Specifications may change without prior notice. catalogoBlusensIPTV_2014DEF.indd 36-37 04/03/14 11:30
  20. 20. set top boxset top box 3938 www.blusensnetworks.com T.14 Dimensions 22,8 x16,5 x 4 cm Weight 694 g USB USB Host Port Video Outputs Antenna RF input and output HDMI 1.3 high definition output (Full HD, supports 1080p) Audio Outputs SPDIF Coaxial and optical audio output Compatible formats Video MPEG 1-2, MPEG 4.2-XVID, MPEG AVC 4.10 H264, MPEG 4.14 NERO DIGITAL, AVCHD Image JPEG, BMP y PNG Audio MP3, AAC, AC3, WMA, EAC3 Containers AAVI, MP4, MPG, VOB, TS, TP, MKV, MP3, AAC, M4A, WMA, MOV, M2TS t.14 T.14 HD DTT Set Top Box •  High definition DVB-T (MPEG4/ H264), able of playing high definition Matroska MKV/H264 High Profile L4.0 files and compatible with Full HD (1080p - 24fps). •  Compatible with multiple multimedia formats and allows multiple AV outputs including HDMI high definition output. •  Allows 24 hours of continuous recording from conventional & HD DVB-T and programmable channel recordings. •  High Definition DVB-T Tuner (MPEG4/H264) and DVB-T MPEG2 definition. •  High definition Matroska MKV/H264, High Profile L4.0 files playback. •  Full HD (supports 1080p - 24fps). •  USB Host port. •  EPG, Parental channel control, teletext and timer. •  Allows channel sort. •  Recording: directly or programmed. •  English, spanish, galician, basque and catalonian OSD language menu. Hardware Specifications may change without prior notice. catalogoBlusensIPTV_2014DEF.indd 38-39 04/03/14 11:30
  21. 21. Vodstreamingcluster catalogoBlusensIPTV_2014DEF.indd 40-41 04/03/14 11:30
  22. 22. Vod streamIng clUsterVod streamIng clUster 4342 www.blusensnetworks.com The VoD cluster is the group of servers responsible of storing and streaming the on- demand contents to each STB managed by the middleware. The cluster can be divided into several storage and caching levels with one or more specific node at each level. The most common approach is to have one or two levels with one node each. In the first level, the storage nodes store and replicate the multimedia content library. At the second and further levels, the streaming nodes act as both streamers and caching nodes, providing the capacity to answer the queries from the STB faster than from the first level. When a STB asks for a movie to a streamer, the streamer checks if the movie is stored locally in its own memory. If the content is available locally, the streaming starts immediately, otherwise, the streamer asks the storage to stream the content to itself. The content is then served through the streamer to the STB. At the same time, the content is split in two and cached locally in the streamer to speed up the subsequent accesses from other users to the same movie. This clustering approach means that the storing and streaming requirements can grow independently from each other making it possible to adapt the system to any installation size. VoDKAST Architecture Graphic sTorage nodes SN.12 Up to 2 tb storage node The storage nodes, with an optional external disk array, provide storage of any content of the media library, ensuring fast access, fault tolerance, continuous data output and the capacity of redimensioning the network while in operation. The storage facility will store both the VoD, NetPVR, playout and metadata of the whole media library of the hospitality system. The storage capabilities of the platform can be increased by adding more storage nodes, independently from the streaming capacity required. Up to 2 tb storage node •  Up to 2 TB storage node. •  Capable of storing up to 450 hours of SD video or 180 hours of HD video. •  RAID 1 mirroring to ensure data redundancy. •  Gigabit Ethernet output. •  Optional 10 Gigabit Ethernet output. •  1 Disk Maximum fail tolerance. SN.12 Architecture Processor Two Intel Xeon processors 5500 series Cache Level 1: 32 KB instruction and 32 KB data L1 cache per core Level 2: 256 KB unified (data and instruction) L2 cache per core Level 3: 4 MB or 8 MB shared inclusive L3 cache per processor Main memory 12 DDR3 DIMM slots (six DIMM slots per CPU socket); system supports from 2 GB (1x 2 GB to 96 GB (12x 8 GB) of memory System architecture Based on Intel Xeon processor 5500 series and Intel 5500 Chipset Standard/integrated interfaces Network: Two 10/100/1000Base-T Ethernet ports Serial: One RJ-45 port USB: Five USB 2.0 ports (two front, two rear, one internal) Expansion bus: One PCIe 2.0 slot (x16 electrical/x16 mechanical, low-profile) Software Operating systems Solaris 10 OS OpenSolaris™ OS Red Hat Enterprise Linux 4 Red Hat Enterprise Linux 5 SUSE Linux Enterprise Server 10 VMware ESX 3.5 Windows Server 2003 Standard/Enterprise Editions Windows Server 2008 Standard/Enterprise Editions Windows Server 2008 Standard/Enterprise/ Datacenter Editions Networking Two GbE ports integrated on motherboard Management Optional Sun Integrated Lights Out Manager (ILOM) service processor module – VGA 8 MB: 1,024x768 at 60 Hz – Management port: One 10/100 RJ-45 port Enables remote power control; remote keyboard, video, mouse (KVM) graphical access; and remote media (DVD, CD, floppy) Secure remote access using Web interface over SSL, or CLI over SSH Sun™ xVM Ops Center software support IPMI 2.0, SNMP v1, v2c, and v3 In-band, out-of-band, and side-band remote management Mass storage and media Internal disk option Up to four hot-pluggable 3.5 in. SATA disk drives, 4 TB max.: 1 TB, 500 GB (7,200 rpm) Up to four hot-pluggable solid-state drives (SSDs), 128 GB max.: 32 GB3 Up to two Sun Flash Modules, 48 GB max.: 24 GB3 SN.12 Environment Operating temperature: 5° C to 35° C (41° to 95° F) at sea level Non operating temperature: -40° C to 68° C (-40° to 154° F) Operating relative humidity: up to 93%, non condensing, 38° C max. wet bulb Non operating relative humidity: Up to 93%, non condensing Operating altitude: Up to 3,000m (9,000 ft.), max. ambient temperature is derated by 1° C per 300m above 900m Non operating altitude: 10,000m (35,000 ft.) Acoustic noise: 7.5 B operating, 7 B idling / 70 dBA operating, 60 dBA idle (declared noise emissions in accordance with ISO 9296 A-weighted, sound power) Power Single non redundant power supply; max. power supply rating 600 W at >80% efficiency AC power: 100–240 V AC (47–63 Hz) Regulations Safety IEC 60950, UL/CSA 60950, EN 60950, CB Scheme with all country differences RFI/EMI FCC CFR 47 Part 15 Class A, EN 300 386 v1.3.3, EN 55022 Class A, EN 61000-3-2, EN 61000-3-3 Immunity EN 55024, EN 300 386 v1.3.3 Certifications Safety CE, CB Scheme, UL, CSA, CCC, BSMI, AR-S, GOST-R EMC CE, FCC, VCCI, ICES, BSMI, CCC, MIC, C-Tick, AR-S, GOST-R Other RoHS-compliant labeled, per WEEE (Waste Electrical and Electronics Equipment) Directive (2002/95/EC) Dimensions and weight Height 43mm (1.7 in.) Width 436mm (17.2 in.) Depth 650mm (25.6 in.) Weight MIN 9.8 kg (21.7 lbs.) MAX 13.9 kg (30.6 lbs.) Mounting option Rackmounting slide rail kit Toolless rackmounting slide rail kit Cable management arm Warranty One year, next business day Hardware Specifications may change without prior notice. catalogoBlusensIPTV_2014DEF.indd 42-43 04/03/14 11:30
  23. 23. Vod streamIng clUsterVod streamIng clUster 4544 www.blusensnetworks.com SN.148 Architecture Disk system Six on board LSI disk controller chips each directly connects to 8 SATA drives for max data throughput 48 hot-swappable, 3.5-in. SATA II HDD internal disks: 250 GB, 500 GB, 1000 GB 7200-RPM disks available; 48 TB total capacity Software RAID enabled by RAID-Z, RAID-Z2 in Solaris ZFS, other Linux, or Windows RAID code Processor Two quad-core AMD™ Opteron processors, Model 2356 One 512Kb Level 2 cache per core 2 MB L3 cache per processor Main memory Sixteen DDR-2 DIMM slots (eight DIMM slots per CPU socket); 32 GB with 2 GB DIMMs, 64 GB with 4 GB DIMMs and 128 GB when 8GB DIMM is qualified Four 10/100/1000Base-T Ethernet ports Network management: One dedicated 10/100Base-T Ethernet port Serial: One TIA/EIA-232-F asynchronous, RJ45 connector USB: Four USB 2.0 ports (two front and two rear) Video: VGA video port Expansion slots: Three internal MD2 low-profile PCI-E slots, 8x wide each One compact flash disk port for OS booting Software Operating systems Solaris 10 05/08 preinstalled Standard Linux distributions, SLES10 SP1 64 bit, Rhel4.6 & 5.1 64 bit Windows 2003 Standard and Enterprise version 32 bit and 64 bit OS Booting Booting from the flash disk is supported by Solaris, Linux and windows, the external flash Disk OS booting saves up to 2 TB HDD capacity for data Two mirrored OS drives are also configured on two different disk controllers for max availability Networking ONC™, ONC+TM, NFS, WebNFS, TCP/IP, SunLink™, OSI, MHS, IPXTM/SPX, SMB technologies, and XML Management Integrated Lights Out Manager (ILOM) service processor providing: CLI (in-band and out-of- band), IPMI 2.0 (in-band and out-ofband), SNMP (out-of-band only) Sun xVM Ops Center — manage from one to hundreds of systems from a central location SN.148 Environment AC power 100-240 V AC, 50-60 Hz, 10 A, 100 V support is with 3 power supply unit configuration with 2+1 redundancy Operating temperature/humidity 5°C to 32°C (37°F to 91°F), 10-90 percent relative humidity, non condensing, 27°C max. wet bulb Non operating temperature/humidity -40°C to 65°C (-40°F to 149°F), up to 93 percent relative humidity, non condensing, 38°C max. wet bulb Operating altitude Up to 3048 m; maximum ambient temperature is derated by 1°C per 300 m above 900 m Non operating altitude Up to 12000 m Acoustic noise LwAd (1B = 10 dB): At or below 25°C, 7.5B, at max. ambient, 8.5B LpAm bystander: At or below 25°C, 65 dB, at max. ambient, 75 dB Mounting option 19-inch rackmount kit Power Dual-redundant, hot-swappable power supply Power supply output rating: 1,500 W Maximum system consumption 1,180 W Regulations (meets or exceeds) Safety: IEC60950, UL/CSA60950, EN60950, CB scheme with all country differences RFI/EMI: FCC Class A, Part 15 47 CFR, EN, 55022, CISPR 22, EN300-396: v1.31, ICES-003 Immunity: EN55024, EN300-386:v1.3.2 Certifications Safety: cULus Mark, CE Mark, GOST R, S-Mark EMC: CE Mark (93/68/3EEC); Emissions and Immunity — Class A Emissions Levels: FCC, VCCI, C-Tick, MIC, GOST R2, BSMI2 Other: Labeled per WEEE (Waste Electrical and Electronic Equipment) Directive Dimensions and weight Height 6.89 in./175.05 mm Width 17.28 in./439 mm Depth 29.52 in./749.90 mm Weight 170 lbs./77 kg Hardware Specifications may change without prior notice. SN.148 Up to 48 tb storage node Up to 48 tb storage node •  Scales from 6 to 48TB storage space. •  RAID 5 redundancy. •  Capable of storing 20000 hours of SD video or 8000 hours of HD video. •  Gigabit Ethernet output. •  Optional 10 Gigabit Ethernet output. •  More than 1 Disk Maximum fail tolerance. sTreamIng nodes 300 mbps streamer cache node Up to 300 Mbps of streaming capacity. It can stream up 60 SD streams or up to 25 HD streams. CN.1300 300 Mbps Streamer Cache Node •  Up to two hard disks. •  RAID 1 redundancy. •  Gigabit Ethernet output. •  Optional 10 Gigabit Ethernet output. •  1 Disk Maximum fail tolerance. CN.1300 Architecture Processor One or Two Quad-Core Intel Xeon L5420 Processor, 2.50 GHz, 1333 MHz FSB, 50W. Cache Quad Core Processors: 12 MB L2 cache per core Main memory DIMM Slots Memory Type Up to 32 GB of 800 MHz ECC FB-DIMM or 667 MHz ECC FB-DIMM Memory Configuration 4 GB total memory. System configurations from 1 GB up to 32 GB Graphics Controller ASPEED AST2000 System architecture Intel Quad Core technology Standard/integrated interfaces Network: Four Integrated 10/100/1000 Base-T Ethernet ports Management: Service processor with embedded Lights Out Manager (LOM) standard Serial: RJ-45 SATA: Up to two hot-pluggable SATA bays, 2 TB max. USB: Five USB 2.0 ports (two front, two rear, one internal) Expansion bus: One PCIe slot (x16 electrical/x16 mechanical), half-length, half-height Software Operating systems Solaris OS 10 or GNU/Linux IPMI 2.0 compliant Service Processor with embedded. Lights Out Management offering remote power, KVM (keyboard, video, mouse) and media capability Mass storage and media Internal disk option Two hot-pluggable 250-750 GB 7200 rpm 3.5” SATA II HD Removable Media Up to one EIDE DVD-ROM or DVD+/-RW DL drive RAID RAID 1 hardware mirroring to provide fault tolerance Environment Operating temperature: 5° to 35° C (41° to 95° F) at sea level Non operating temperature: -40° to 68° C (-40° to 154° F), up to 93% relative humidity, non condensing, 38° C max. wet bulb Operating altitude: Up to 3,000m (9,000 ft.), max. ambient temperature is derated by 1° C per 300m above 900m Non operating altitude: up to 12,000m (=~36,000 ft.) Acoustic noise: 70 dBA operating, 69 dBA idle (declared noise emissions in accordance with ISO 9296 A-weighted, sound power) Power Single PSU AC power: 100–240 V AC (47–63 Hz) Regulations Safety IEC 60950, UL/CSA 60950, EN 60950, CB Scheme with all country differences RFI/EMI FCC CFR 47 Part 15 Class A, EN 300 386 v1.3.3, EN 55022 Class A, EN 61000-3-2, EN 61000-3-3 Immunity EN 55024, EN 300 386 v1.3.3 Certifications Safety CE, CB Scheme, UL, CSA, CCC, BSMI, AR-S, GOST-R EMC CE, FCC, VCCI, ICES, BSMI, CCC, MIC, C-Tick, AR-S, GOST-R Other RoHS-compliant labeled, per WEEE (Waste Electrical and Electronics Equipment) Directive (2002/95/EC) Dimensions and weight Height 44 mm (1.7”) Width 425.5 mm (16.8”) Depth 633.7 mm (25”) Weight 13.3 kg (27.2 lbs.) Warranty One year, next business day RoHS-compliant labeled, per WEEE (Waste Electrical and Electronics Equipment) Directive (2002/95/EC) Hardware Specifications may change without prior notice. catalogoBlusensIPTV_2014DEF.indd 44-45 04/03/14 11:30
  24. 24. Vod streamIng clUsterVod streamIng clUster 4746 www.blusensnetworks.com CN.11200 1200 Mbps. Streamer Cache Node 1200 mbps streamer cache node Up to 1200 Mbps of streaming capacity. It can stream up to 240 SD streams, or up to 100 HD streams. •  Up to four hard disks. •  RAID 1+0 redundancy. •  Gigabit Ethernet output. •  Optional 10 Gigabit Ethernet output. •  2 Disk Maximum fail tolerance. CN.11200 Architecture Processor Two Intel Xeon processors 5500 series Cache Level 1: 32 KB instruction and 32 KB data L1 cache per core Level 2: 256 KB unified (data and instruction) L2 cache per core Level 3: 4 MB or 8 MB shared inclusive L3 cache per processor Main memory 12 DDR3 DIMM slots (six DIMM slots per CPU socket); system supports from 2 GB (1x 2 GB to 96 GB (12x 8 GB) of memory System architecture Based on Intel Xeon processor 5500 series and Intel 5500 Chipset Standard/integrated interfaces Network: Two 10/100/1000Base-T Ethernet ports Serial: One RJ-45 port USB: Five USB 2.0 ports (two front, two rear, one internal) Expansion bus: One PCIe 2.0 slot (x16 electrical/x16 mechanical, low-profile) Software Operating systems Solaris 10 OS OpenSolaris™ OS Red Hat Enterprise Linux 4 Red Hat Enterprise Linux 5 SUSE Linux Enterprise Server 10 VMware ESX 3.5 Windows Server 2003 Standard/Enterprise Editions Windows Server 2008 Standard/Enterprise Editions Windows Server 2008 Standard/Enterprise/ Datacenter Editions Networking Two GbE ports integrated on motherboard Management Optional Sun Integrated Lights Out Manager (ILOM) service processor module – VGA 8 MB: 1,024x768 at 60 Hz – Management port: One 10/100 RJ-45 port Enables remote power control; remote keyboard, video, mouse (KVM) graphical access; and remote media (DVD, CD, floppy) Secure remote access using Web interface over SSL, or CLI over SSH Sun™ xVM Ops Center software support IPMI 2.0, SNMP v1, v2c, and v3 In-band, out-of-band, and side-band remote management Mass storage and media Internal disk option Up to four hot-pluggable 3.5 in. SATA disk drives, 4 TB max.: 1 TB, 500 GB (7,200 rpm) Up to four hot-pluggable solid-state drives (SSDs), 128 GB max.: 32 GB3 Up to two Sun Flash Modules, 48 GB max.: 24 GB3 CN.11200 Environment Operating temperature: 5° C to 35° C (41° to 95° F) at sea level Non operating temperature: -40° C to 68° C (-40° to 154° F) Operating relative humidity: up to 93%, non condensing, 38° C max. wet bulb Non operating relative humidity: Up to 93%, non condensing Operating altitude: Up to 3,000m (9,000 ft.), max. ambient temperature is derated by 1° C per 300m above 900m Non operating altitude: 10,000m (35,000 ft.) Acoustic noise: 7.5 B operating, 7 B idling / 70 dBA operating, 60 dBA idle (declared noise emissions in accordance with ISO 9296 A-weighted, sound power) Power Single non redundant power supply; max. power supply rating 600 W at >80% efficiency AC power: 100–240 V AC (47–63 Hz) Regulations Safety IEC 60950, UL/CSA 60950, EN 60950, CB Scheme with all country differences RFI/EMI FCC CFR 47 Part 15 Class A, EN 300 386 v1.3.3, EN 55022 Class A, EN 61000-3-2, EN 61000-3-3 Immunity EN 55024, EN 300 386 v1.3.3 Certifications Safety CE, CB Scheme, UL, CSA, CCC, BSMI, AR-S, GOST-R EMC CE, FCC, VCCI, ICES, BSMI, CCC, MIC, C-Tick, AR-S, GOST-R Other RoHS-compliant labeled, per WEEE (Waste Electrical and Electronics Equipment) Directive (2002/95/EC) Dimensions and weight Height 43mm (1.7 in.) Width 436mm (17.2 in.) Depth 650mm (25.6 in.) Weight MIN 9.8 kg (21.7 lbs.) MAX 13.9 kg (30.6 lbs.) Mounting option Rackmounting slide rail kit Toolless rackmounting slide rail kit Cable management arm Warranty One year, next business day Hardware Specifications may change without prior notice. oPTIonal feaTures storage replIcatIon Storage replication is an optional feature that allows the stored media to be automatically replicated in another server, even in another building to provide fault tolerance and transparent backup features to the VoD cluster. transcodIng VoD streaming require that the content is encoded in a certain way so that all the elements of the network know how to handle the data. A transcoding node will enable the operator to load the content in any format and store it in as many ones as required, so that the same content can be streamed in different qualities. VIrtUal tIcKetIng Virtual ticketing is a technology which ensures that the access URL for a media content is created for one specific STB, so it can be only watched by this STB even if the URL is stolen by another user. The unauthorized access to any content is blocked and the incidence is reported. Virtual ticketing is not a DRM mechanism, is an access control mechanism. load balancIng Load balancing is an optional feature that is continually monitoring the current streaming load of every streamer. The queries of a STB for a specific content can be automatically redirected to the least busy streamer so the total load of the cluster is equitably distributed through all the streamers. The streaming nodes are the connection points between the VoD cluster and the STB with VoD capabilities. Its responsibility is to store locally the most demanded contents to provide fast response and to automatically get the least demanded contents from the storage nodes and store it locally for further queries for the same content. The streaming capabilities of the platform can be increased by adding more streaming nodes independently from the storage space required. STREAMING POWER Unlimited growing capacity by addition of new nodes. VoD FUNCTIONS VCR functions Play, Pause, Stop, Reverse and Fast-forward. Trick modes default x6 x12 FF and REW speeds (the available speeds are configurable at installation time) SUPPORTED STREAMING FORMATS Video MPEG-1/2, MPEG-4/AVC(h.264), both SD and HD qualities. Audio MPEG-1/2, MP3, AAC. SUPPORTED STREAMING PROTOCOLS Streaming Transport Stream over RTP, HTTP, etc. Control RTSP with OVS extensions. catalogoBlusensIPTV_2014DEF.indd 46-47 04/03/14 11:30
  25. 25. Ipcontributionhead-end catalogoBlusensIPTV_2014DEF.indd 48-49 04/03/14 11:30
  26. 26. Ip contrIbUtIon head-endIp contrIbUtIon head-end 5150 www.blusensnetworks.com The contribution head-end, part of the Blusens blu:core line, is the part of the system in charge of obtaining live content from any source and perform the appropriate operations to transform this feeds into multicast IP streams capable of being transferred through the IP network. Once these streams are in IP format, the middleware is the responsible of granting or revoking the access of each STB to them. According to the source of the live video the contribution can be digital or analog. In the first case the feeds will come from satellite (DVB-S) terrestrial (DVB-T) or cable (DVB-C) broadcasts. On the other hand, for the analog contribution, the input will be composite or s-video, both in PAL or NTSC formats. As the content distributed in DVB-S/T/C is already an MPEG2-TS stream, the operation performed by the digital contribution is remove the QPSK, QAM or any other transport layer and substitute it by IP. That's why the digital video stream is not modified in any moment and the broadcast quality is maintained during the whole distribution of the channel through the IP network. For the analog contribution option, the first step is encoding the original analog source into MPEG-2 digital format. Once this step is done, the stream behaves exactly the same as a digital stream being transferred through the network. dIgITal conTrIBuTIon The digital contribution IP Streamer offers a complete professional video head-end solution. It is built around a modular platform, that brings the capability of hosting as many tuning modules as required. This way, the scalability of the platform is assured by providing a higher density, lower cost and better reliability system due to its integrated architecture. The IP Streamers can receive MPEG-2 transport streams from a variety of input sources (ASI, DVB-S/S2, DVB-T, IP and DVB-C, with QPSK, 8PSK, COFDM or QAM modulations) and can descramble and re-scramble selected services, before streaming it via IP or ASI. All the elements of the system are continuously monitored, including decoding CAM modules via a web-based Management Interface, which enables remote configuration of all modules,real time status of their performance, and presentation of service related information. The streamer supports full analysis of PSI/SI (PSIP in later release) and regenerates all tables as required. •  GB IP (electrical or optical), ASI, DVB-S/S2, DVB-T and DVB-C inputs. •  GB IP (electrical or optical) and ASI output MPTS or SPTS. Supports multiple of output modules. •  Multiplexing. •  PSI/SI regeneration. •  Support for AES SW descrambling. •  Support DVB and AES scrambling, simulcrypt interface based. •  Intuitive web-based user control. •  SNMP Alarm MIB. •  SOAP/XML Interface. SC/CAB1PSSW 10 Slot Contribution Chassis •  Up to 24 ASI or 16 DVB-S/S2, DVB-T, DVB-C Inputs. •  Up to 8 DVB common interface slots for DVB descrambling. SC/CAB1PSSW- IPOUT 10 Slot Contribution Chassis SC/CAB1PSSW- IPOUT4CI 10 Slot Contribution Chassis SC/CAB4PS-03 16 Slot Contribution Chassis •  Up to 45 ASI or 28 DVB-S/S2, DVB-T, DVB-C Inputs. •  Up to 14 DVB common interface slots for DVB descrambling. SC/CAB4PS-04 16 Slot Contribution Chassis SC/SWM •  Gbit/s routing between modules in a chassis. •  Integrated from the front. SC/CAB1PSSW-IPOUT-IPOUT4CI •  Modular configuration with up to 9+1 board positions. •  WEB based configuration, SNMP Alarms, SOAP/XML interface. •  Forced air-cooling. •  Hot-swappable modules in back. •  Optional IP IO and descramblers in front. SC/SWM •  Gbit/s routing between modules in a chassis. •  Integrated from the front. SC/CAB4PS-03 •  Modular configuration with up to 16+2 board positions. •  WEB based configuration, SNMP Alarms, SOAP/XML interface. •  Forced air-cooling. •  Hot-swappable modules. •  Dual redundant hot-swappable 300 W power supply. •  4 individually monitored hot-swappable fans. chassIs SC/MX Multiplexing Provides support for remultiplexing output streams in the headend. It is required to provide EPG services to the middleware. catalogoBlusensIPTV_2014DEF.indd 50-51 04/03/14 11:30
  27. 27. Ip contrIbUtIon head-endIp contrIbUtIon head-end 5352 www.blusensnetworks.com •  10/100/1000BaseT input card (RJ45) •  Mini-GBIC interface (SFP) for optical input. •  Supports UDP/RTP Multicast/Unicast reception. •  Supports reception of MPTS and SPTS. •  Service filtering. •  PCR regeneration. •  10/100/1000BaseT management port (RJ45) •  Enables WEB management. •  1 slot wide. •  4xQAM inputs. •  F connector. •  0.87-6.9 Ms/s. •  Supports reception of MPTS and SPTS. •  Service filtering. •  ASI Monitoring port. •  10/100/1000 BaseT management port (RJ45) •  Enables WEB management. •  2 slots wide. •  4xQPSK inputs. •  F connectors. •  DVB-S mode. •  950 – 2150 MHz Frequency Range. •  1-45 MSym/s. •  1/2, 2/3, 3/4, 5/6, 7/8 FEC. •  Supports reception of MPTS and SPTS. •  Service filtering. •  ASI Monitoring port. •  10/100/1000BaseT management port (RJ45) •  Enables WEB management. •  2 slots wide. •  4xDVB-S/S2 inputs. •  F connectors. •  DVB-S, DVB-S2 QPSK and 8PSK modes. •  950 – 2150 MHz Frequency Range. •  1-45 MSym/s (mode dependent) •  1/2, 2/3, 3/4, 5/6, 7/8, 8/9, 9/10 FEC (mode dep.) •  Supports reception of MPTS and SPTS. •  Service filtering. •  ASI Monitoring port. •  10/100/1000BaseT management port (RJ45) •  Enables WEB management. •  2 slots wide. •  4xCOFDM inputs. •  F connector. •  1/2, 2/3, 3/4, 5/6, 7/8 FEC. •  2k and 8k carrier mode. •  QPSK, 16QAM, 64QAM modulation. •  Supports reception of MPTS and SPTS. •  Service filtering. •  ASI Monitoring port. •  10/100/1000 BaseT management port (RJ45) •  Enables WEB management. •  2 slots wide. •  3xASI input. •  BNC connectors. •  213 Mbit/s per input. •  Supports reception of MPTS and SPTS. •  Service filtering. •  PCR regeneration. •  10/100/1000BaseT management port (RJ45) •  Enables WEB management. •  1 slot wide. InpUt modUles SC/GBIPIN-MMI Ethernet Input SC/3ASI-MMI ASI Input w/Management SC/4DVBS-MMI DVB-S Input w/Management SC/4DVBSS2-MMI DVB-S/S2 Input w/Management SC/4QAM-MMI DVB-C Input w/Management SC/4COFDM-MMI DVB-T Input w/Management •  10/100/1000BaseT input card (RJ45) •  Mini-GBIC interface (SFP) for optical input. •  Supports UDP/RTP Multicast/Unicast transmission. •  Supports multiple of output cards. •  Streaming of up to 850 Mbit/s. •  Maximum 250 service per output card. •  Supports streaming of SPTS. •  Support streaming of MPTS with Multiplexing (optional) •  PSI/SI regeneration. •  PCR regeneration. •  1 slot wide. •  4xASI outputs. •  BNC connectors. •  213 Mbit/s per output. •  4 Different multiplexed outputs. •  Maximum 250 services per card. •  PSI/SI regeneration. •  PCR regeneration. •  1 slot wide. •  2xDVB Common interface. •  Descrambling of 2-8 services (depends on common interface) •  Support for all major CA systems and CAMS. •  1 slot wide. •  DVB CA compliant scrambling (CSA) and AES compliant scrambling. •  Scrambles up to 250 services, maximum 850 Mbit/s. •  Supports partial scrambling and PVR. •  Support scrambling of MPEG-2 and H.264 in SD&HD. •  DVB Simulcrypt compliant. •  10/100/1000BaseT IP interface towards CA system (RJ45) •  Handles up to 250 ECM’s. •  1 slots wide. •  2 SDI/HDSDI outputs per decoder •  MPEG2 and MPEG4 (H264) SD and HD •  VBI re-insertion (WSS, WST/EBU Teletext, VPS, VITS) •  DVB and EBU subtitling •  2 SDI /HDSDI outputs per decoder •  1 slot wide •  2 decoders per module •  MPEG-2 DVB 4:2:0 MP@ML decoding •  VBI re-insertion (WSS, WST/EBU Teletext, VPS, VITS) •  DVB and EBU subtitling •  2 DVB Common Interfaces. One per channel •  High performance RF modulation and up- conversion •  47 – 862 MHz frequency range •  F connector output with both channels combined •  Ttest output – F connector •  External mute of RF output •  NICAM or A2 stereo audio (option) •  2 slots wide processIng modUles oUtpUt modUles SC/2CI Descrambler SC/DVBSCS250 Scrambling SC/GBIPOUT Ethernet Output SC/ASIOUTMX ASI output SC/ADMSDIHD 4HD Decoder with SDI Output SD/HPDDMRF Dual Decoder w/RF output and NICAM/A2 catalogoBlusensIPTV_2014DEF.indd 52-53 04/03/14 11:30
  28. 28. Ip contrIbUtIon head-endIp contrIbUtIon head-end 5554 www.blusensnetworks.com analog conTrIBuTIon The analog contribution modules can receive any analog signal in composite or S-Video format and transform it into MPEG2-TS multicast IP streams to inject it into the IP network providing a convenient way to integrate legacy video generating systems in the IPTV system. Once transformed by this modules, the streams can be treated exactly the same as the live TV streams coming from the digital contribution head-end, the playout server or the Digital Signage server. The analog contribution series consists of 3 different sized models, enabling custom-sized streaming systems: Ranging from the ultra-compact 1 slot chassis (max. one blade) up to the rackable 21 slot chassis (max. 21 blades) for high-density and multichannel streaming applications, the later one with dual redundant power supplies. All the chassis series supports easy replacement and hot-swapping/hot-plugging of inserted blades. The chassis models are professional and industrial grade enclosures. The chassis ensure ideal operating conditions for video blades and enable 24/7 operation. chassIs AC.11 •  Single channel blade chassis, 5V DC, 10W, 100-240V AC. •  External power supply included. •  Dimensions (H/W/D): 45mm x 145mm x 240mm. •  Weight: 650 grams. •  No forced cooling required (fanless) AC.12 •  Dual channel blade chassis, 5V DC, 10W, 100-240V AC. •  External power supply included. •  Dimensions (H/W/D): 75mm x 145mm x 240mm. •  Weight: 950 grams. •  No forced cooling required (fanless) AC.121 •  High-density, multichannel chassis, holds max. 21 blades. •  Internal dual, redundant power supply: Max. 150W with 21 blades, 90-240V AC. •  Dimensions (H/W/D): 176(4RU) x 480 x 400 mm. •  Weight: 9,5 Kg empty. AM.300 MPEG-2 SD encoder blade with SDI Video input AM.100 MPEG-2 SD encoder blade with COMPOSITE input AM.200 MPEG-2 SD encoder blade with Y/C, S-Video input All video blade models process input streams in full DVD-quality for professional MPEG-2 SD streaming to any kind of device. AM encoder blades are built for robust 24/7 LIVE encoding operations and can be used in tough environmental conditions. They are designed without any moving parts, making them diskless, fanless and noiseless. encodIng blades PROFESSIONAL QUALITY The encoders incorporate low-latency compression technology and professional signal processing, creating full resolution and smooth motion DVD-quality video streams. Simple setup Connect LAN Ethernet and a video/audio input signal and the AM encoder will turn into a true video networking “port”, transmitting your video in digital form over IP networks. Easy configuration To access the intuitive graphical user interface use your standard web browser from any PC on the network, no special or additional tools required. Extremely robust and durable The AM encoders runs on an embedded real-time platform. This blade is designed without any moving parts, as hard drives/fans, to ensure system uptime, reliability and noiseless operation. The AM can be used in extreme operating conditions and at temperatures up to 65°C. AM encoders Encoding Specifications Standards PAL, NTSC Video Inputs Composite Input 1 VPP, 75 Ohm (BNC) S-Video Input 1 VPP (Y), 0,3 VPP (C - Pal), 0,286 VPP (C - NTSC), 75 Ohm (miniDIN) SDI Input 0,8 VPP, 75 Ohm (BNC), embedded audio supported for orders of min. 50 units Video Resolutions Full D1 720h x 480/576v, 2/3-D1: 704h x 576/480v Half D1 384h x 480/576v, CIF/SIF: 384h x 240/288v Audio Inputs Unbalanced Analog Stereo, Line level, 3.5mm jack (mini jack) Audio Outputs (TALKBACK) Analog Dual Mono, Line level 3.5mm jack (mini jack) MPEG-2 Video Encoding MPEG-2 (ISO/IEC 13818-2), Main Profile at Main Level (MP@ML), 4:2:0 Stream Types ISO/IEC 13818-1 Transport ISO/IEC 13818-2,3 Elementary A/V Video Encoding Bitrates 800Kb/s – 15Mb/s (CIF/SIF min. 800Kbit/s, Full D1 min. 2Mbit/s) MPEG-2 Audio Encoding MPEG-1 Audio Layer 2 (ISO/IEC 11172-3 Layer 2) I/O Specifications Network 10/100TX Ethernet, RJ45, half/full duplex, Auto-sensing Streaming Traffic Unicast and Multicast traffic supported IP Protocols HTTP (Web Browser), TCP/IP Control Protocol, UDP/IP Streaming, IGMPv2, Supports SAPv1, SNMP, DHCP RS-232/485 port Remote control for non IP devices via TCP/IP RS-232/485 command tunnelling GPI 1 INPUT, for device control: streaming on/off configuration Environmental Agency Approvals CE, RoHS Humidity Up to 80%, non-condensing Temperature 0 to +65°C environment temperature; fanless when operated in FR-110 or FR-210 chassis Weight Approx. 150 grams Blade dimensions (H/W/D) 20mm x 130mm x 190mm Power 5W per blade Limited Warranty 1 year standard limited warranty. Warranty extensions available. Hardware Specifications may change without prior notice. catalogoBlusensIPTV_2014DEF.indd 54-55 04/03/14 11:30
  29. 29. netpVr catalogoBlusensIPTV_2014DEF.indd 56-57 04/03/14 11:30
  30. 30. net pVrnet pVr 5958 www.blusensnetworks.com neT PVr VoDKAST Network Personal Video Recorder (VoDKAST nPVR) increases the possibilities of the VoDKAST platform with the capability of recording, indexing and managing live video sources. This way, it is possible for the user to record live broadcasts, and store it in the VoD streaming cluster storage space for later on demand recovery, providing several services, for example: - Schedule network recordings. The recordings can be managed directly from the EPG or manually programmed. The users decide which programs they want to record and this programs are automatically recorded in VoDKAST servers. Later, the users will be able to watch the recordings on demand when needed. - Legal filing systems. For continuous recording of video broadcasting and their later recovering. The Legal filing systems incorporates the EPG information for easy browsing of the recorded contents. This kind of cyclic recordings can be integrated with video surveillance systems. It also supports Catch Up TV services, or live shows recording for the later on demand re-broadcasting. The NetPVR allows the implementation of Time Shifting for TV channels which allows to the users that are watching a TV channel, to pause and recover it from the beginning of its broadcast using on demand video controls. Due to legal reasons, VoDKAST nPVR offers several configuration options of the filling systems: •  Option “one single copy” to manage a single physical recording and several logical recordings. •  Option “multiple copies” to manage multiple physical copies •  Option “legal file”. Live indexing of the recordings to allow recovering via positioning inside the recorded media. VR.100 NetPVR Server Node VR.100 Architecture Disk system Six on board LSI disk controller chips each directly connects to 8 SATA drives for max data throughput 48 hot-swappable, 3.5-in. SATA II HDD internal disks: 250 GB, 500 GB, 1000 GB 7200-RPM disks available; 48 TB total capacity Software RAID enabled by RAID-Z, RAID-Z2 in Solaris ZFS, other Linux, or Windows RAID code Processor Two quad-core AMD™ Opteron processors, Model 2356 One 512Kb Level 2 cache per core 2 MB L3 cache per processor Main memory Sixteen DDR-2 DIMM slots (eight DIMM slots per CPU socket); 32 GB with 2 GB DIMMs, 64 GB with 4 GB DIMMs and 128 GB when 8GB DIMM is qualified Four 10/100/1000Base-T Ethernet ports Network management: One dedicated 10/100Base-T Ethernet port Serial: One TIA/EIA-232-F asynchronous, RJ45 connector USB: Four USB 2.0 ports (two front and two rear) Video: VGA video port Expansion slots: Three internal MD2 low-profile PCI-E slots, 8x wide each One compact flash disk port for OS booting Software Operating systems Solaris 10 05/08 preinstalled Standard Linux distributions, SLES10 SP1 64 bit, Rhel4.6 & 5.1 64 bit Windows 2003 Standard and Enterprise version 32 bit and 64 bit OS Booting Booting from the flash disk is supported by Solaris, Linux and windows, the external flash Disk OS booting saves up to 2 TB HDD capacity for data Two mirrored OS drives are also configured on two different disk controllers for max availability VR.100 Networking ONC™, ONC+TM, NFS, WebNFS, TCP/IP, SunLink™, OSI, MHS, IPXTM/SPX, SMB technologies, and XML Management Integrated Lights Out Manager (ILOM) service processor providing: CLI (in-band and out-of- band), IPMI 2.0 (in-band and out-ofband), SNMP (out-of-band only) Sun xVM Ops Center — manage from one to hundreds of systems from a central location Environment AC power 100-240 V AC, 50-60 Hz, 10 A, 100 V support is with 3 power supply unit configuration with 2+1 redundancy Operating temperature/humidity 5°C to 32°C (37°F to 91°F), 10-90 percent relative humidity, non condensing, 27°C max. wet bulb Non operating temperature/humidity -40°C to 65°C (-40°F to 149°F), up to 93 percent relative humidity, non condensing, 38°C max. wet bulb Operating altitude Up to 3048 m; maximum ambient temperature is derated by 1°C per 300 m above 900 m Non operating altitude Up to 12000 m Acoustic noise LwAd (1B = 10 dB): At or below 25°C, 7.5B, at max. ambient, 8.5B LpAm bystander: At or below 25°C, 65 dB, at max. ambient, 75 dB Mounting option 19-inch rackmount kit Power Dual-redundant, hot-swappable power supply Power supply output rating: 1,500 W Maximum system consumption 1,180 W Regulations (meets or exceeds) Safety: IEC60950, UL/CSA60950, EN60950, CB scheme with all country differences RFI/EMI: FCC Class A, Part 15 47 CFR, EN, 55022, CISPR 22, EN300-396: v1.31, ICES-003 Immunity: EN55024, EN300-386:v1.3.2 Certifications Safety: cULus Mark, CE Mark, GOST R, S-Mark EMC: CE Mark (93/68/3EEC); Emissions and Immunity — Class A Emissions Levels: FCC, VCCI, C-Tick, MIC, GOST R2, BSMI2 Other: Labeled per WEEE (Waste Electrical and Electronic Equipment) Directive Dimensions and weight Height 6.89 in./175.05 mm Width 17.28 in./439 mm Depth 29.52 in./749.90 mm Weight 170 lbs./77 kg Hardware Specifications may change without prior notice. catalogoBlusensIPTV_2014DEF.indd 58-59 04/03/14 11:30
  31. 31. dIgITalsIgnage catalogoBlusensIPTV_2014DEF.indd 60-61 04/03/14 11:30
  32. 32. dIgItal sIgnagedIgItal sIgnage 6362 www.blusensnetworks.com It is a new and cost effective way of increasing brand or product visibility in public areas. Using IP technology we can create advertising channels that provide wanted information and, thus, attract an attention that static advertising may not. Furthermore, the marketing campaign can be much more defined and focused, issuing the message to the appropriate market profile, at the right location and time, and creating a far more indelible impression. WhaT Is dIgITal sIgnage? The extensive experience and knowledge of the Pulsar product team, in both large installation and VoD management, makes it the right tool to face any challenges related to security, user experience, immediacy and management of remote locations. Pulsar is a complete product that enables the operator to have full control, from a central location, of the full system, including screen layouts, content, program grill, etc. WhaT can dIgITal sIgnage do for you? Pulsar Digital signage solution allows you to create a multimedia advertising solution for providing content to hundreds of screens simultaneously. It also allows you to manage and monitor on real time what is being broadcast on each screen. The playout solution is the simplest digital signage platform and allows you to feed the signage screens with a full screen sequence of videos, but, if you want more flexibility for, for example showing more than one video at once, Pulsar Digital Signage platform is your answer. The Pulsar video distribution is supported by the most advanced IPTV technologies providing a high connectivity solution in which the video streams are transferred through the network as multicast IP streams low connectivity solution in which the multimedia contents are distributed and then stored locally in each screen, so a problem in the network won’t affect to the video shown in the screens. SHOPPING MALLS, SHOWROOMS, RETAIL SHOPS By melting the powerful advertisement capabilities of the Digital Signage solution and the flexibility of content distribution through an IPTV platform, a commercial surface of any size can deploy from one to hundreds of advertising screens in all its branches reaching more customers and having full control from the headquarters. catalogoBlusensIPTV_2014DEF.indd 62-63 04/03/14 11:30
  33. 33. dIgItal sIgnagedIgItal sIgnage 6564 www.blusensnetworks.com Pulsar gives you the simplest mechanism to provide the most advanced Digital Signage experience in four easy steps. catalogoBlusensIPTV_2014DEF.indd 64-65 04/03/14 11:30
  34. 34. dIgItal sIgnagedIgItal sIgnage 6766 www.blusensnetworks.com STEP 1 Select the resolution of the output screen, Pulsar can work with SD, HD, 16:9, 4:3, etc. Any resolution is supported. Divide the output screen space into any number of regions and select the size for each region with the drag and drop interface It’s even possible to overlap the regions if desired. STEP 2 Upload the multimedia content to the server. Any content is supported MPEG-2, MPEG-4, DIVX, h.264, Adobe Flash animations and video, JPEG, TIFF, etc. It’s also possible to associate an external information source to any resource. This way you can deploy a flash animation with weather information, and the information to fill the template will be gathered form Internet. catalogoBlusensIPTV_2014DEF.indd 66-67 04/03/14 11:30
  35. 35. dIgItal sIgnagedIgItal sIgnage 6968 www.blusensnetworks.com STEP 3 Compose a schedule of programs by filling the layouts defined in the step 1 with the resources defined in the step 2. The layout can change within a schedule so you can deploy a full screen video and then split the screen in four regions with a different RSS feed in each. STEP 4 Assign one of the schedules defined in the step 3 to any of the screens available in the network. The administrator can check in real time what is being broadcast in each screen at any moment. catalogoBlusensIPTV_2014DEF.indd 68-69 04/03/14 11:30
  36. 36. dsservers catalogoBlusensIPTV_2014DEF.indd 70-71 04/03/14 11:30
  37. 37. dIgItal sIgnage serVersdIgItal sIgnage serVers 7372 www.blusensnetworks.com PlayouT serVer With the playout server, the administrator can generate continuous loops of full screen pre-scheduled contents and inject it in the network as multicast streams. This is the easiest and simplest way of creating Digital Signage information channels. These streams are created in MPEG-2 TS format and the original contents must be MPEG-2 video as well. The platform supports both standard and high definition streaming and can schedule even stored and live TV contents under a common schedule. Playout Server Architecture PS.100 Playout Server •  Generates TV channels from realtime video feeds and stored content. •  Connects to VoDKAST servers to retrieve stored on-demand multimedia, or to access remote real-time encoders. •  Generates an IPTV multicast or broadcast channel. •  Scheduling can be controlled from the graphical user interface integrated in the VoDKAST Management Desktop. •  An XML/HTTP API is also provided for easy integration with third party control systems. •  Both RTP and Transport Stream output formats are supported. seamless splIcIng Optionally, VoDKAST Playout can perform seamless splicing for MPEG-2 content, thus generating a continuous, clean stream out of multiple input sources and switches. Seamless splicing is a technology which calculates on real time the intermediate video frames during the transition between two videos in a sequence. This means when switching from one video to following, the resulting stream won’t be affected by MPEG-2 video noise providing a clean, smooth transition. By using the advanced scheduling functions the administrator can compose multicast TV channels interspersing Live TV streaming from the satellite or a CCTV camera with local stored advertisements, each 10 minutes for example. As the stream created shows only one video at once, a channel generator is not required, but high bandwidth network is a must. Any problem in the network connection will be reflected in the video on the screens. sIgnage serVer Signage Server Architecture With Pulsar Digital Signage server the administrator can manage the whole Digital Signage platform. It controls the channel generators, composes schedules of screen templates and manages the resources used to fill these templates. It’s also responsible of uploading the resources to the channel generators in a completely bandwidth controlled way. Finally, the server will monitor on real time what is being broadcast in each screen with the local time in the screen location, triggering the proper SNMP alerts in case of any incidence. catalogoBlusensIPTV_2014DEF.indd 72-73 04/03/14 11:31
  38. 38. dIgItal sIgnage serVersdIgItal sIgnage serVers 7574 www.blusensnetworks.com DS.100 Digital Signage Server Pulsar Digital Signage server can generate any screen composition by dividing the screen into a template with smaller regions. Each region can have any loop of contents in almost any media format and the layout of the template can change accordingly to the time schedule. A web server gives access to the platform in a hierarchical way, allowing the Digital Signage contractor to resell time slots for specific regions of certain screens to third parties making it possible to get direct revenue from this platform. Pulsar Digital Signage server can drive as many low and high connectivity channel generators as desired, independently from the IP technology used to connect the server to the channel generators. It can also upload any given template to one or a group of Channel Generators to provide an easy and fast management of large amounts of screens. The server will also manage the synchronization of the channel generators even if they are distributed across different time zones. It’s possible to link specific contents to a external information system, like weather RSS feeds or queue ticketing systems. The server will get the information from the external sources periodically and will upload the updated info to each screen. In case the internet connection with the server is lost, the signage screens will work with the latest available information avoiding empty spaces in the screens’ templates, for both low and high connectivity channel generators. •  Flexible screen template definition and scheduling. •  Mixed Low and High connectivity channel generators management. •  Screen provisioning based on the most advanced IPTV technologies. •  Managed screen content provision bandwidth and scheduling. •  Individual or group screen addressing. •  Third parties information integration and caching. •  Real Time screen monitoring. •  Multiformat content. •  Connection to the screens via any IP technology (Ethernet, Wifi, 3G, Satellite, DSL, analog modem, etc.) •  Integration of LiveTV, Playout or VoD contents in the templates. PS.100 Architecture Processor One or Two Quad-Core Intel Xeon L5420 Processor, 2.50 GHz, 1333 MHz FSB, 50W. Cache Quad Core Processors: 12 MB L2 cache per core Main memory DIMM Slots Memory Type Up to 32 GB of 800 MHz ECC FB-DIMM or 667 MHz ECC FB-DIMM Memory Configuration 4 GB total memory. System configurations from 1 GB up to 32 GB Graphics Controller ASPEED AST2000 System architecture Intel Quad Core technology Standard/integrated interfaces Network: Four Integrated 10/100/1000 Base-T Ethernet ports Management: Service processor with embedded Lights Out Manager (LOM) standard Serial: RJ-45 SATA: Up to two hot-pluggable SATA bays, 2 TB max. USB: Five USB 2.0 ports (two front, two rear, one internal) Expansion bus: One PCIe slot (x16 electrical/x16 mechanical), half-length, half-height Software Operating systems Solaris OS 10 or GNU/Linux IPMI 2.0 compliant Service Processor with embedded. Lights Out Management offering remote power, KVM (keyboard, video, mouse) and media capability Mass storage and media Internal disk option Two hot-pluggable 250-750 GB 7200 rpm 3.5” SATA II HD Removable Media Up to one EIDE DVD-ROM or DVD+/-RW DL drive RAID RAID 1 hardware mirroring to provide fault tolerance Environment Operating temperature: 5° to 35° C (41° to 95° F) at sea level Non operating temperature: -40° to 68° C (-40° to 154° F), up to 93% relative humidity, non condensing, 38° C max. wet bulb Operating altitude: Up to 3,000m (9,000 ft.), max. ambient temperature is derated by 1° C per 300m above 900m Non operating altitude: up to 12,000m (=~36,000 ft.) Acoustic noise: 70 dBA operating, 69 dBA idle (declared noise emissions in accordance with ISO 9296 A-weighted, sound power) Power Single PSU AC power: 100–240 V AC (47–63 Hz) Regulations Safety IEC 60950, UL/CSA 60950, EN 60950, CB Scheme with all country differences RFI/EMI FCC CFR 47 Part 15 Class A, EN 300 386 v1.3.3, EN 55022 Class A, EN 61000-3-2, EN 61000-3-3 Immunity EN 55024, EN 300 386 v1.3.3 Certifications Safety CE, CB Scheme, UL, CSA, CCC, BSMI, AR-S, GOST-R EMC CE, FCC, VCCI, ICES, BSMI, CCC, MIC, C-Tick, AR-S, GOST-R Other RoHS-compliant labeled, per WEEE (Waste Electrical and Electronics Equipment) Directive (2002/95/EC) Dimensions and weight Height 44 mm (1.7”) Width 425.5 mm (16.8”) Depth 633.7 mm (25”) Weight 13.3 kg (27.2 lbs.) Warranty One year, next business day Hardware Specifications may change without prior notice. DS.100 Architecture Processor Two Intel Xeon processors 5500 series Cache Level 1: 32 KB instruction and 32 KB data L1 cache per core Level 2: 256 KB unified (data and instruction) L2 cache per core Level 3: 4 MB or 8 MB shared inclusive L3 cache per processor Main memory 12 DDR3 DIMM slots (six DIMM slots per CPU socket); system supports from 2 GB (1x 2 GB to 96 GB (12x 8 GB) of memory System architecture Based on Intel Xeon processor 5500 series and Intel 5500 Chipset Standard/integrated interfaces Network: Two 10/100/1000Base-T Ethernet ports Serial: One RJ-45 port USB: Five USB 2.0 ports (two front, two rear, one internal) Expansion bus: One PCIe 2.0 slot (x16 electrical/x16 mechanical, low-profile) Software Operating systems Solaris 10 OS OpenSolaris™ OS Red Hat Enterprise Linux 4 Red Hat Enterprise Linux 5 SUSE Linux Enterprise Server 10 VMware ESX 3.5 Windows Server 2003 Standard/Enterprise Editions Windows Server 2008 Standard/Enterprise Editions Windows Server 2008 Standard/Enterprise/ Datacenter Editions Networking Two GbE ports integrated on motherboard Management Optional Sun Integrated Lights Out Manager (ILOM) service processor module – VGA 8 MB: 1,024x768 at 60 Hz – Management port: One 10/100 RJ-45 port Enables remote power control; remote keyboard, video, mouse (KVM) graphical access; and remote media (DVD, CD, floppy) Secure remote access using Web interface over SSL, or CLI over SSH Sun™ xVM Ops Center software support IPMI 2.0, SNMP v1, v2c, and v3 In-band, out-of-band, and side-band remote management Mass storage and media Internal disk option Up to four hot-pluggable 3.5 in. SATA disk drives, 4 TB max.: 1 TB, 500 GB (7,200 rpm) Up to four hot-pluggable solid-state drives (SSDs), 128 GB max.: 32 GB3 Up to two Sun Flash Modules, 48 GB max.: 24 GB3 DS.100 Environment Operating temperature: 5° C to 35° C (41° to 95° F) at sea level Non operating temperature: -40° C to 68° C (-40° to 154° F) Operating relative humidity: up to 93%, non condensing, 38° C max. wet bulb Non operating relative humidity: Up to 93%, non condensing Operating altitude: Up to 3,000m (9,000 ft.), max. ambient temperature is derated by 1° C per 300m above 900m Non operating altitude: 10,000m (35,000 ft.) Acoustic noise: 7.5 B operating, 7 B idling / 70 dBA operating, 60 dBA idle (declared noise emissions in accordance with ISO 9296 A-weighted, sound power) Power Single non redundant power supply; max. power supply rating 600 W at >80% efficiency AC power: 100–240 V AC (47–63 Hz) Regulations Safety IEC 60950, UL/CSA 60950, EN 60950, CB Scheme with all country differences RFI/EMI FCC CFR 47 Part 15 Class A, EN 300 386 v1.3.3, EN 55022 Class A, EN 61000-3-2, EN 61000-3-3 Immunity EN 55024, EN 300 386 v1.3.3 Certifications Safety CE, CB Scheme, UL, CSA, CCC, BSMI, AR-S, GOST-R EMC CE, FCC, VCCI, ICES, BSMI, CCC, MIC, C-Tick, AR-S, GOST-R Other RoHS-compliant labeled, per WEEE (Waste Electrical and Electronics Equipment) Directive (2002/95/EC) Dimensions and weight Height 43mm (1.7 in.) Width 436mm (17.2 in.) Depth 650mm (25.6 in.) Weight MIN 9.8 kg (21.7 lbs.) MAX 13.9 kg (30.6 lbs.) Mounting option Rackmounting slide rail kit Toolless rackmounting slide rail kit Cable management arm Warranty One year, next business day Hardware Specifications may change without prior notice. catalogoBlusensIPTV_2014DEF.indd 74-75 04/03/14 11:31
  39. 39. channelgenerators catalogoBlusensIPTV_2014DEF.indd 76-77 04/03/14 11:31

×