1.
Introduction of Jinhong Termite
Protection Barrier
Clyde Freeman
Jinhong Australia PTY LTD
at
AGSERV PESTECH 2015

2.
Jinhong Australia Pty Ltd
• Jinhong Australia Pty Ltd is an
Australian based subsidiary of
the major international
company Jinhong China which
has expertise in a variety of
plastic technologies, including
a number of established
termite protection sheet
barriers with established
market share in Australia.
• Address: Suite 40, L2, 89-97
Jones Street, Ultimo, NSW
2007
• ABN: 36 163 906 241

3.
Jinhong China
Jinhong China / Manufacturing
Plant

4.
Introduction of
Jinhong People
Mr. Jinhong Wu
Senior Engineer ;
Owner of Jinhong
China; Chairman of
Jinhong Australia P/L;
Established Jinhong
China 30 years ago,
with an advanced
expertise in design
and manufacture of
geosynthetic materials
over 25 years.

5.
Introduction of
Jinhong People
Dr. Jiasi Wang, Technical Director;
B.S. Beijing Normal University;
M.S. The University of Tokyo;
Ph. D. University of Hawaii at
Manoa major in Urban
Entomology;
Post Doctor The University of
Mississippi at Oxford;
Study termite behavior and
ecology at Kochi University Japan
for 3 years as Research Scientist;
Study termite with Acoustic
method at The University of
Mississippi at Oxford as Research
Scientist for 2 years ;
Worked for Ensystex Inc. as
supplier manager and technical
representative in Japan and China
for 9 years.

6.
Introduction of
Jinhong People
Mr. Jack Wu, Sales Manager;
Information Engineering,
Xi’an Jiaotong University, China;
MSc Digital Communications
Systems,
Loughborough University,
United Kingdom;
As a sale manager in Jiangsu
Jinhong Geosynthetics since Jan
2010;
Has extensive experience in
Geosynthetics Manufacture,
Production control,
Quality control and
Construction application.
His acknowledge covers Non-
Woven fabrics, Plastic
Membrane, DPC, Geogrid and
Composite Materials and
Termite Protection Barriers.

7.
Introduction of
Jinhong People
Mr. Clyde Freeman, Technical
Representative;
10 years of employment in the
development, CodeMark
certification and supply of
physical termite barrier
management products;
With a broad range of experience
on difficult work sites;
Has been involved in construction
related industries at management
level since entering the work
force in 1973.
Cert III Carpentry & Joinery
Cert IV Building
Cert IV Training & Assessment

8.
Jinhong Australia launched its product, Jinhong Termite
Protection Barrier at AEPMA in August 2014

9.
Introduction of Jinhong
Termite Protection Barrier
Jinhong Australia Launched
Jinhong Termite Protection
Barrier at the AEPMA
conference in August 2014.
APVMA Reg No.:
69617/61255
The products are Q/A
manufactured to CodeMark
& Australian Standards.
The barrier receives strict
independent analysis and
inspection before exportation.
Its durability is 50 years which
reflects the life expectancy
requirements of the ABCB.

10.
Introduction of Jinhong
Termite Protection Barrier
The product has been tested
in field for demonstrating its
efficacy to block subterranean
termites.
• TRIAL REPORT
• Field trial to test Jinhong Termite
Blanket (2g/kg deltamethrin) against
various subterranean termite species in
tropical Australia
• PROJECT: Jinhong Termite Blanket
CodeMark certification
• AUTHOR: Warwick Madden B.Sc.Agr.
• LOCATION: Townsville, QLD
• DATE OF STUDY No: JHA01/14
• REPORT: 6 August2014
• AIM: To investigate the effectiveness of
Jinhong Termite Blanket against various
subterranean termite species in
tropical Australia to provide data for
Codemark certification.

11.
Introduction of Jinhong Termite
Protection Barrier
Efficacy test site in Townsville

12.
Introduction of Jinhong
Termite Protection Barrier
The product has been tested
in field to demonstrating its
efficacy to block subterranean
termites.
• SUMMARY
• Jinhong Termite Blanket was tested at two sites near
Townsville in north Queensland. Pits were excavated in
areas of high termite activity and susceptible timbers
placed. Samples of Jinhong Termite Blanket (2g/kg
deltamethrin) wrapped around susceptible timber
were placed on top of the timbers in the pits. Samples
of Other product (5g/kg deltamethrin) were placed in
the pit as a standard product. Samples of Jinhong
Termite Blanket containing no active ingredient were
also installed to act as untreated controls. Timbers
were placed on top of the samples (six replicated per
pit) and the earth replaced.
• After three months the pits were opened and
inspected. Extensive damage to the feeder timbers by
subterranean termites (Coptotermes acinaciformis,
Heterotermes, Schedorhinotermes) had occurred. On
inspection of the samples almost all untreated controls
had been extensively mudded indicating a lack of
repellency. However no Jinhong product had been
mudded. Some mudding had occurred to two of the
other samples.
• The results indicate that the active ingredient in the
Jinhong product is working to repel termites and
protect the timbers inside from damage in the long
term.

13.
Introduction of Jinhong
Termite Protection Barrier
Installation Manual

14.
Introduction of Jinhong Termite
Protection Barrier
Brochure for Installer

15.
Introduction of Jinhong Termite
Protection Barrier
Brochure for homeowner

16.
Introduction of Jinhong Termite
Protection Barrier
Brochure for homeowner

17.
Introduction of Jinhong
Termite Protection Barrier
Jinhong Termite Protection
Barrier has been
CodeMark certified by Sai
Global

18.
Introduction of Jinhong
Termite Protection Barrier
Jinhong Termite Protection Barrier
passed AS/NZS 2904 : 1995 DPC &
Flashing test carried out by CSIRO. Eng

19.
Introduction of Jinhong
Termite Protection Barrier
Jinhong Termite Protection
Barrier has Public Liability
Insurance

20.
Introduction of Jinhong Termite
Protection Barrier
Warranty for Jinhong Termite
Protection Barrier 50 Year Warranty

21.
Introduction of Jinhong Termite
Protection Barrier
Specifications Accessories

22.
Introduction of Jinhong Termite
Protection Barrier
Specifications Accessories

23.
Introduction of Jinhong Termite
Protection Barrier
Application on construction site

24.
Introduction of Jinhong Termite
Protection Barrier
Application on construction site Flexibility

25.
Introduction of Jinhong Termite
Protection Barrier

26.
Issues caused by the currently used
physical termite protection barriers
Wicking Itching sensation
• Some brands of termite
protection barrier have a
wicking problem because
the middle fibre layer of the
product is too thick.
• Allowing the water transfer
by siphon action.
• The reason for the itching
problem to people with
sensitive skin is that the
crystals of AI (Deltamethrin)
can come out from the
middle layer of the product.
• The edge of the barriers are
is not sealed when cut.

27.
JINHONG TPB PLUS
The Leading Edge
• OH&S (overall roll weight
reduction)
• Durability (increased
strength top & bottom
layer)
• Thickness reduction
(reducing joins & the
chance of damage by
following trades)
• Two in One Capabilities
DPC Approval AS/NZS 4347
Advanced Laminating
• Reduction in skin Sensitivity
• Continuous edge seal
• Eliminate (wicking)

28.
Jinhong has resolved these issues by
Reducing the middle layer
thickness of the product
• To resolve wicking issue

29.
Comparison for wicking issue between
current product and new product
Two hours later Twelve hours later

30.
Jinhong has resolved those issues by
Sealing the edge of the product JH TPB Plus
• Advances in the laminating
process to prevent the
crystals of AI escaping from
the middle layer.
• Resolving the itching
problem of installers with
sensitive skin when
installing the barrier.

31.
The modified new product is
coming soon!

32.
Thank you for your attention!