Successfully reported this slideshow.
Your SlideShare is downloading. ×

How to reset canon mp145

Ad
Ad
Ad
Ad
Ad
Ad
Ad
Ad
Ad
Ad
Ad
Upcoming SlideShare
Error code canon 145
Error code canon 145
Loading in …3
×

Check these out next

1 of 3 Ad

More Related Content

Advertisement

How to reset canon mp145

  1. 1. Procedure to reset Printer canon MP145 Fix Error E27, Error E8 Printer Canon MP145: 1. turn off printer 2. with printer connected to apower source, press and hold both power and reset button for approx 10 sec 3. release reset button but do not release power button yet 4. press reset button 2x then release power button 5. wait for printer to power up 6. on powering up you should see 0 on the led screen (if not, RESTART!) 7. press reset button 4x 8. press power button 3x and wait for printer to power off
  2. 2. 9. press power to turn on printer Canon MP145 Error code. E2-2 = No paper (ASF) E3-3 = Paper jam E4 = No ink E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly E8 = Waste ink absorber full, or platen waste ink absorber full E9 = The connected digital camera / video camera does not support Camera Direct Printing E14 = The Ink cartridges whose destination are wrong E15 = Ink cartridge is not installed E16 – Ink remaining is unknown E16-E19 = Failed to scan head alignment sheet E22 = Carriage error E23 = Paper feed error E24 = Purge unit error E25 = ASF (cam) sensor error E26 = Internal temperature rise error E27 = Waste ink absorber full or platen waste ink absorber full E28 = Ink cartridge temperature rise error — E29 = EEPROM error
  3. 3. E33 = Paper feed position error E35 – 15 = USB Host VBUD overcurrent error – USB E37 – 17 = Abnormal motor driver error E40 – 20 = Other hardware error E42 – 22 = Scanner error

×