Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.
Some challenges every 3D modeling artist will
encounter and their optimal solutions
3D modeling is really a complex matter...
Pits in 3D Mesh or unmatched edges
Picture this: You are putting some nice apples in a net. The
ties in net are connected ...
Upcoming SlideShare
Loading in …5
×

Some challenges every 3d modeling artist will encounter and their optimal solutions

286 views

Published on

3D modeling is really a complex matter and proper care has to be there to get things right. A broken model that can’t be made print ready ruins the whole effort.
The errors that occur associate to many factors. False conversion is one of the main reasons. The failure of software used for rendering can cause issues. Here are the most common challenges that are encountered by companies offering 3D modeling services; and their solutions.

Published in: Design
  • Be the first to comment

  • Be the first to like this

Some challenges every 3d modeling artist will encounter and their optimal solutions

  1. 1. Some challenges every 3D modeling artist will encounter and their optimal solutions 3D modeling is really a complex matter and proper care has to be there to get things right. A broken model that can’t be made print ready ruins the whole effort. The errors that occur associate to many factors. False conversion is one of the main reasons. The failure of software used for rendering can cause issues. Underlying are the most common challenges that are encountered by companies offering 3D modeling services; their solutions are also given. Wall strength or thickness Usually they stay at the value of zero or are very less. This will make the print job to crash which should be avoided. Glued plastic should have minimum 2mm while ceramic need 3-6 mm and sintered materials 0.8-1 mm. You must decide the material to be used before setting order for the model. Read more about How to use SketchUp effectively for 3D modelling?
  2. 2. Pits in 3D Mesh or unmatched edges Picture this: You are putting some nice apples in a net. The ties in net are connected and everything is okay. But what happens if any one of the ties get loose? The apples will be on ground in no time. This is exactly what happens in case of meshes of 3D files. When the printer detects a hole in the mesh, it will mark your model as defective. Checking your net in advance is the apt solution to avoid such mishap as per the companies offering these services. There are several software using which you can scrutinize your model. Then you can use repairing tools for closing the unmatched edges. Boolean operations While putting together several portions in 3D by shifting and allying them visually, it seems to be already from outside. But the fact is that in most of the cases, such models can’t be printed. Experienced companies suggest using Boolean operations as a solution to this issue. Cavities or holes that can’t be printed Holes are unavoidable in cases of certain models that are to be linked with hinges or screws. Several print processes are there that demand cavities and this can cause problems. Whenever necessary, escape holes should be there in the model that you construct. According to professionals, 10mm is the ideal diameter for escape holes. In case if they are not straight tunnel but seem to be a cave system, the holes should be bigger. Every artist offering these services should be acquainted with the above challenges are their solutions. To know more about the tips, trends and latest news regarding 3D modeling services, stay in touch with us and we promise to keep you updated.

×