TECAFORM. The versatile engineering plasticTECAFORM with high strength and dimensional stability. TECAFORM is suitable for a wide range of applications. It is characterised by its resist- ance to organic solvents and outstanding machinability. Bearing block TECAFORM has good sliding and abrasion TECAFORM AH behaviour and low water absorption proper- Very good sliding ties. properties, high strength, very good machinability. | High strength and hardness | Low water absorption | Very good machinability | Good UV resistance of black grades Belt guide bushing TECAFORM AD | Low adhesion forces for good sliding Low water absorption, properties high strength. | Good abrasive behavior TECAFORM AH black TECAFORM AD Good UV stability. High mechanical strength. Very good machinability. Very good machinability. TECAFORM AH TECAFORM AD AF Cam guide Good chemical resistance. Very good sliding properties thanks TECAFORM AD High resilience. to the PTFE content. Low water High dimensional absorption. stability, good sliding TECAFORM AH GF 25 friction values. Glassfibre-reinforced acetal with On request: very high strength and high heat resistance. TECAFORM AH TF Very good sliding and abrasion TECAFORM AH LA blue properties. Stiff and rigid. Good Very good sliding and abrasion val- resistance to detergents and ues. Low water absorption. solvents. TECAFORM AH ELS black TECAFORM AD GF 20 Adjusted electrical conductivity. Very abrasion resistant. Good weldability. Good UV resistance. TECAFORM AD CL Very good sliding properties. Abrasion resistant. 10 Please find the lastest information at www.ensinger-online.com.