Successfully reported this slideshow.
You’ve unlocked unlimited downloads on SlideShare!
• Drywall work should be done in a perfect way . preparing for
drywall work involves more than just choosing the right type
of drywall and the number of sheets you require.
• You have to make sure the tools are choosen in a proper way
that will suit your situation and the room will need to be
prepared for the work.
• Temperature and humidity can also affect your work and
determine how quickly the joint compound dries
• Successful drywalling depends upon you having the
appropriate tools, and there are tools designed specifically for
• The perfect tools should be choosen for the drywall work.
• A tape measure, T-square, framing square, chalkline, and
pencil will be needed no matter the size of the space and the
height of the ceiling.
• Drywall screws or nails, mixing tools, taping knives, and
sanding tools should be choosen properly to give a
• These are designed to rip through the paper face and gypsum
core of drywall.
• The one shown here is a drywall utility saw.
• Use point to break through material and start cut.
• Has a gently tapered head that creates a natural recess for
• When it strikes the paper surface, it creates a waffle contour
that helps lock the compound.
• Click here https://drywalljobs.net/important-drywall-tools-
different-drywall-services/ to know more about different
types of tools
Drywall screw gun
• Used to drive screws into drywall.
• It has a clutch so that the drywall screw will go just below the
surface of the drywall sheet and dimple the sheet.
Utility knife and taping knives
• Used to make cuts through the face of the paper to score the
panel before snapping it to length.
• Make sure the blade is sharp and easy to work .
• Depending on the stage of the drywall process, you may
select a knife that is 1–6 in (25–150 mm) wide.
• Knives are used to embed the tape along a seam and to
spread and smooth joint compound
Mixing tools and sanding tools
• When working (https://drywalljobs.net/descriptive-note-
different-types-drywall-work/)with joint compound to fill nail
holes, secure tape, and fill gaps, you will need mixing tools.
• You can either mix the compound by hand or use an
attachment to your drill.
• After you complete the taping and joint compound
application process, you will most likely still need to smooth
• Sand paper is ideal for small areas and corners. Sanding
sponge is another option. For ceilings, a pole sander is a good
Aug. 22, 2020
Drywall installation will become incomplete without some of the unique tool varities. such tools are listed in these slides