the attic insulation installation is done mainly for two purposes - reduces energy consumption and provides moderate climate indoor. this slide the overview on attic insulation in energy reduction
8447779800, Low rate Call girls in Uttam Nagar Delhi NCR
Control the flow of energy through attic insulation
1. Control the flow of energy
through attic insulation and enjoy
moderate climate indoor
2. Attic insulation
• Attic insulations may sometime refers to be
home insulations but this attic insulations is
always a insulation done in roofs’
• The attic portion accepts all type of insulation
regardless of fiberglass, cellulose, spray foam.
3. Why insulation is done?
• The main reason of insulation is maintenance of
moderate temperature indoor. But there are still
more beneficial factors like pest resistant, noise
retarder, etc…
• But the second most important factor is
reduction of energy loss.
4. How energy is reduced?
• Insulation is simply said as a external protector,
thus for the house wherever the insulation is
done, it does it function by acting as a obstacle
for varying temperatures.
• Since attic is the place for frequent energy flow, it
is necessary to install attic insulation in the
specific area.
5. Points to consider for attic insulation
installation
• Contact the energy
inspectors:
• the energy inspectors
completely inspects the
house for the unwanted
energy flow and the heat
absorbing part and
suggests the design
procedures for the house.
6. • Decide for the place to insulate:
• Insulation need not be done in all the places,
it can be done in particular place, else whole
home insulation is also preferred in case of
remodeling or new home built
7. • Make decision about the type of insulations:
• Not all the insulations are utilized in all the
places, so the folks have to undertake some
basic study about the insulations, in order to
choose the right type.
8. • Be precise about the need:
• Some folks insulate the
house for various purposes
other than energy saving and
moderate temperature like
pest control, rodent control,
radiation barrier, etc…
• The need should ne specified
properly, in order to design
accordingly.
9. Energy inspection as DIY
• Even non professional folks
can do the energy
inspection task with a
simple equipment called
“thermo scan”.
• This equipment perfectly
scans the area for the heat
energy and show indicates
the difference in
temperature with the
variation in color.
10. • Thermoscan is designed to capture the heat
signals and this used infrared light sources.
• This equipment measures the following are
affected by
• Temperature
• Sunlight
• Moisture
• wind
11. • The intervention of bugs and insects are more
• the skin started to feel the cold or hot
• The monthly utility bills gets the rapid
increases within a month
• The walls, floors and ceilings began to absorb
the outside temperature.
How to find the house ready for
insulation?
12. • Attic Insulation installation should be designed
in such a way to meet the R-value and the
design requirement of the house.
• Energy audition before the attic insulations is
always the major task.
13. • These are the some overview on attic
insulation installation benefits and the
process
• Whatever the type insulation should be
done in with care in order to be free from
unwanted allergies and the major health
hazards.
14. • Aesofutah is one of the insulation services
providers in the area of Utah with efficient
energy inspector to monitor and control the
energy loss, there by reducing the energy bills
• To know more, visit
http://www.aesofutah.com.