Surface Analysis Techniques Course Sept&Dec 2012


Published on

1. Technical Personnel and Decision-Makers are encouraged to participate in this training.
2. DECISION MAKERS: Technical Directors, Managers, Purchasers.
3. TECHNICAL PERSONNEL: Lecturers, Technical Sales, Marketing, Failure Analysis, Research & Development, Quality Control and Assurance, Production Engineers or Technicians.

Published in: Education, Technology, Business
  • Be the first to comment

  • Be the first to like this

No Downloads
Total views
On SlideShare
From Embeds
Number of Embeds
Embeds 0
No embeds

No notes for slide

Surface Analysis Techniques Course Sept&Dec 2012

  1. 1. PUSAT PENGAJIAN KEJURUTERAAN BAHAN & SUMBER MINERAL SCHOOL OF MATERIALS & MINERAL RESOURCES ENGINEERINGMore than 300 Engineersand Researchers havebenefited from this course. WHO SHOULD ATTEND? Technical Personnel and Decision-Makers are encouraged to participate in this training. DECISION MAKERS: Technical Directors, Managers, Purchasers. TECHNICAL PERSONNEL: Lecturers, Technical Sales, Marketing, Failure Analysis, Research & Development, Quality Control and Assurance, Production Engineers or Technicians.Dates : (i) 24, 25 & 26 September 2012 or (ii) 19, 20 & 21 December 2012Time : 9.00 a.m. – 5.00 p.m.Venue : Kompleks EUREKA, Universiti Sains Malaysia, Penang.REGISTRATION FEE(Covers training materials, refreshment including lunch in collaboration with:and Certificate of Attendance)Normal Fee : MYR2,480.00 per participantGroup Fee : MYR2,230.00 per participant (wholly-owned by Universiti Sains Malaysia)(Minimum 3 participants from the same company /organisation) Approved Under HRDF 1Malaysia Training Program Programme ID : 3089HRDF Claimable* *Subject to HRDF Approval
  2. 2. INTRODUCTION COURSE CO-ORDINATORThe characteristic of surface and near-surface regions of ASSOCIATE PROFESSOR DR. IR. CHEONG KUAN YEWmaterials can be characterised by various surface analysistechniques. Applications of many engineering materials are Kuan Yew Cheong was born in Ipoh,determined by the surface and near-surface structures. Perak (1972) and received the B. EngTherefore, the well being of this region is essential in order to (1st Hons.) in Materials Engineeringobtain a pre-required condition for those materials to be applied from Universiti Sains Malaysia (USM),for a specific application. Typically, failure of engineering Malaysia in 1997. After graduation, heproducts may be traced back to surface/near-surface worked for two years as a projectcontamination or surface reconstruction. In order to obtain more engineer and quality assuranceinformation related to the failure, in-sight of these regions need engineer in a project managementto be exposed. This course is outlined to introduce basic company and a semiconductor-deviceprinciples of surface science, which serve as an essential manufacturing factory in to explain the operation concepts and applications of End of 1999, he decided to pursue his postgraduate studyseveral important surface analysis techniques. Know-how of (M.Sc.) after being awarded a Fellowship under the Academicinterpreting the analysis data is also explained in this “easy-to- Staff Training Scheme from USM. After completion his M.Sc. infollow” and “easy-to-understand” training course. With these and Materials Engineering (Thin Film Technology) in 2001, hethe support of brief but sufficient fundamental theories, skill of continued his Ph.D. in the School of Microelectronicselecting a relevant technique with respect to its practical Engineering, Griffith University, Australia and the degree wasengineering usage will be covered. Ultimate goal for this course awarded in 2004. This study was fully sponsored by Australianis to increase level of knowledge in making a correct technical Research Council, USM, and Griffith University Postgraduatedecision to solve surface related issues and transform Research Scholarship. In 2005, he was awarded a Certificate ofknowledge into applications. Teaching and Learning from USM. Now he is serving as an Associate Professor at the School of Materials & Mineral Resources Engineering. He is teaching under- and post-COURSE OBJECTIVES graduate courses related to fabrication and characterization ofUpon the completion of this course, participants will be able to: engineering & electronic materials and devices for more than 7 i. List down common techniques used for surface analysis. years. Dr. Cheong’s main research area is on semiconductor ii. Explain operation principles of those techniques. device fabrication, electronic packaging, and characterization. iii. State advantages and limitations of a given analysis The outcomes of his research have been published in more than technique. 85 high-impact-factor journals and 3 book chapters. Due to his iv. Systematically identify and justify useful analytical expertise in wide-bandgap semiconductor-based device technique for problem solving. fabrication technology, and as a Professional Engineer registered under Board of Engineers (Malaysia), for the past six years, he has been invited three times as a Visiting Scientist toBENEFITS TO PARTICIPANTS Korea Electrotechnology Research Institute (KERI), Korea. He has also being invited as an Invited Speaker and Keynote 1. Enhancement of technical knowledge on (Figure 1): Speaker in International Conference on Electronic Materials i. General and specific analysis techniques used in 2010 (ICEM 2010) - International Union of Materials Research industries and research labs. Societies (IUMRS), Korea, CIE & IEM International Seminar on ii. Selection of appropriate analysis techniques for Electrical, Electronic and Energy Saving 2010, Taiwan, and problem solving. Infineon Technologies (Kulim) Sdn Bhd (IFKM) Technical 2. Improvement in decision-making process for analysis Symposium 2010, Malaysia, and Surface Engineering 2011 at technique selection based on: Bangkok, Thailand. Dr Cheong has served as a reviewer for i. Technical justify concept. numerous referred journals and examiner for theses. He has ii. Technical guidelines. reviewed more than 220 manuscripts and now serves as an 3. Reduction of wastage (time and money) by making a Editorial Advisory Board Member of Materials Science in correct technical decision. Semiconductor Processing published by Elsevier Science B.V. Currently, he is being appointed as an External Course Assessor of Microelectronic and VLSI Design for Wawasan Open University, Malaysia. Outside university, he is very active in professional and community activities. He is a member of Materials Research Society (USA). He was the honorary treasurer for Electron Microscopy Society, Malaysia for year 2005/2006. Since 2005, he has been elected as one of the Ex-comms of the Institute of Electrical, Electronic Engineers (IEEE) – Component, Package, and Manufacturing Technology (CPMT) Society and Electron Device Society (EDS), Malaysia Chapter. In addition, he is also the Chairman of the electronic engineering technical division (eETD) under The Institution of Engineers Malaysia (IEM) since 2009. He has been appointed as a Council Member of IEM and a Standing Committee on Qualification/Admission and Examination/Training. For the past years, he has involved inFigure 1: General level of knowledge for user of organizing a number of local and international conferences andanalysis technique. being invited to chair a few technical sessions in those conferences. Dr Cheong, who is a certified PSMB Trainer, has been delivering technical training courses both locally and abroad for the past 5 years and more than 400 engineers andCOURSE METHODOLOGY researchers have benefited from those training. i. Face-to-face lecture – 75%; ii. Pair-share discussion – 10%; iii. Group activities – 5%; iv. Open discussion – 10%.
  3. 3. SURFACE ANALYSIS TECHNIQUES COURSE OUTLINE DAY 1 1. Introduction. 2. Fundamental of Surface Sciences. 3. Logical Sequence of Practical Surface Analytical Problem Solving. 4. Electron Beam Techniques: i. Electron Microscopy (EM); ii. Energy Dispersive X-ray (EDX); iii. Auger Electron Spectroscopy (AES); iv. Electron Energy Loss Spectroscopy (EELS). DAY 2 5. Ion Beam Techniques: i. Secondary Ion Mass Spectroscopy (SIMS); ii. Rutherford Backscattering Spectrometry (RBS). 6. X-Ray Techniques: i. X-Ray Fluorescence (XRF); ii. X-Ray Photoelectron Spectroscopy (XPS); iii. X-Ray Diffraction (XRD). 7. Scanning Probe Microscopy: i. Atomic Force Microscopy (AFM). DAY 3 8. Optical Techniques: i. Fourier Transform Infrared Spectroscopy (FTIR); ii. Raman Spectroscopy. 9. Comparison of Various Surface Analysis Techniques. 10. Selection of Surface Analysis Techniques – A General Rule.Previous Participants Previous ParticipantsIndustry: University:• Vista Point Technologies Sdn. Bhd., Penang. • Universiti Malaysia Pahang (UMP).• Possehl Electronics (Malaysia) Sdn. Bhd., Melaka. • Universiti Teknologi Mara (UiTM).• Motorola Technology Sdn. Bhd., Penang. • Universiti Sains Malaysia (USM).• Dynacraft Industries Sdn. Bhd., Penang. • University College Sedaya International (UCSI).• KOBE Precision Technology Sdn. Bhd., Penang. • Universiti Malaysia Sabah (UMS).• National Semiconductor Sdn. Bhd., Melaka. • University Malaya (UM).• Fuji Electric (Malaysia) Sdn. Bhd., Kedah. • Universiti Tun Hussein Onn Malaysia (UTHM).• Penang Seagate Industries (Malaysia) Sdn. Bhd. • International Islamic University Malaysia (IIUM)• OSRAM Opto Semiconductors (Malaysia) Sdn. Bhd., Penang. Technical Details:• Avago Technologies (Malaysia) Sdn. Bhd., Penang. Associate Professor Dr. Ir. Cheong Kuan Yew• Globetronics Industries Sdn. Bhd., Penang. School of Materials & Mineral Resources Engineering, USM.• Silterra (Malaysia) Sdn. Bhd., Kedah. 04-653 3888 EXT 5259• Advanced Micro Devices (AMD) Export Sdn. Bhd., Penang.• Hoya Electronics Malaysia Sdn. Bhd., Kedah.• Intel Products (M) Sdn. Bhd., Kedah. Registration and others:• Philips Lumileds Lighting Company Sdn. Bhd., Penang. Khairol Anuar Hazir Mohammed• Becker Industrial Coatings (M) Sdn. Bhd. USAINS Holding Sdn. Bhd.• Malaysia Nuclear Agency 04-653 4372 / 012-286 9048• Knowles Electronics (M) Sdn. Bhd. /
  4. 4. REGISTRATION FORM SURFACE ANALYSIS TECHNIQUES SEPTEMBER & DECEMBER 2012 DATE CHOICE 24, 25 & 26 September 2012 19, 20 & 21 December 2012 * Please tick ( ) where appropriate Send registration form to : Khairol Anuar, USAINS Holding Sdn. Bhd., Ground Floor, Kompleks ЄUREKA, Universiti Sains Malaysia, 11800 USM PENANG. Fax : 04-657 2210 or Email to : / ITEM PARTICIPANTS NAME POSITION & EMAIL 1. 2. 3. 4. 5. Company: Address: Postcode: Contact Person: Mobile Phone: Telephone No.: Fax No. E-mail: Mode of Payment Number Bank No. of Participants: I enclose Crossed Cheque Bank Draft Group Discount: Money Order LO / PO Total Sum (MYR) Cheque / Bank Draft / Money Order / LO / PO must be made payable to ‘USAINS HOLDING SDN. BHD.’. 1. Bank Transfer [Please fax your Bank-in Slip (Print your name & details on the slip)]. Payee Name : USAINS Holding Sdn. Bhd. Details : SURFACE ANALYSIS TECHNIQUES SEPTEMBER & DECEMBER 2012 Name of Bank : CIMB Bank Berhad (USM Branch), Universiti Sains Malaysia, 11800 USM Penang. Account Number : 0709-0006708-05-7 2. A Local Order (LO) or Purchase Order (PO) must be presented before the event. The Organizer reserves the right to refrain a registered participant from taking part in the event if no proof of payment can be presented. This only applies to registered participants who have NOT paid the registration fee PRIOR to the event date. 3. Cancellation / Substitution A full refund less administration fee of MYR500.00 will be given for cancellation received not later than 10 working days before the course. No refund will be made after this period. However, substitute participants are welcomed at no extra charge provided written notice of at least 5 working days before the event is given to the Organizer.DisclaimerThe Organizer reserves the right to reschedule or cancel any part of its published programme or venue due to unforeseen circumstances and will not accept liability forcosts incurred by participants or their organizations for the cancellation of travel arrangements and/or accommodation reservations as a result of the course beingcancelled or postponed. Advance notice will be given if there is such a change or cancellation.