Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.
By :
Haris Panca
Muhammad Efantama
Kenanga Ayu Nirmala
This idea we got when we pay attention
to our surroundings clean, some people less
lazy throw away trash in its place amon...
To bring back the community will want to
dispose of the waste in place, some of the trash made
as attractive as possible s...
Solder
Sciccors
Cutter
Glue
Laptop
Ruler
 Arduino Uno
 Sensor Ultrasonik
 Servo TowerPro SG90
 Buzzer
 Resistor 220Ohm
 LED (Red and Blue)
 PCB
 Acrylic
 ...
http://www.farnell.com/datasheets/1682209.pdf
http://www.micropik.com/PDF/SG90Servo.pdf
http://www.micropik.com/PDF/HCSR04.pdf
http://www.tek.com/sites/tek.com/file
s/media/media/resources/Cables2.p
df
• Male to Male
• Male to Female
• Female to Fem...
#include <Servo.h>
Servo myservo;
#define buzzer 3
int sound;
#define trigPin 11
#define echoPin 10
#define led 6
#define ...
Tempat sampah otomatis
Tempat sampah otomatis
Tempat sampah otomatis
Tempat sampah otomatis
Upcoming SlideShare
Loading in …5
×

Tempat sampah otomatis

219 views

Published on

To bring back the community will want to dispose of the waste in place, some of the trash made as attractive as possible so that the public are interested to dump garbage at the venue. One of them, namely the trash with an automated system where to open the dumpster, users do not need to touch the dumpster. Users only need to stand in front of the Ultrasonic sensors on the front, then the bin will open automatically. In addition the bin is equipped with LEDs so that when the bin is open green light will turn on and when the trash can close the light is red.

Published in: Engineering
  • Be the first to comment

Tempat sampah otomatis

  1. 1. By : Haris Panca Muhammad Efantama Kenanga Ayu Nirmala
  2. 2. This idea we got when we pay attention to our surroundings clean, some people less lazy throw away trash in its place amongst other things because, if we have to throw away trash pressing or touching the dumpster, therefore we have an idea to make project of the instrumentation, entitled "Trash" that can open and close automatically so that people will dump need not be touching or tapping the dumpster.
  3. 3. To bring back the community will want to dispose of the waste in place, some of the trash made as attractive as possible so that the public are interested to dump garbage at the venue. One of them, namely the trash with an automated system where to open the dumpster, users do not need to touch the dumpster. Users only need to stand in front of the Ultrasonic sensors on the front, then the bin will open automatically. In addition the bin is equipped with LEDs so that when the bin is open green light will turn on and when the trash can close the light is red.
  4. 4. Solder Sciccors Cutter Glue Laptop Ruler
  5. 5.  Arduino Uno  Sensor Ultrasonik  Servo TowerPro SG90  Buzzer  Resistor 220Ohm  LED (Red and Blue)  PCB  Acrylic  Cable (M to M, M to F, and F to F)  Trash Bin
  6. 6. http://www.farnell.com/datasheets/1682209.pdf
  7. 7. http://www.micropik.com/PDF/SG90Servo.pdf
  8. 8. http://www.micropik.com/PDF/HCSR04.pdf
  9. 9. http://www.tek.com/sites/tek.com/file s/media/media/resources/Cables2.p df • Male to Male • Male to Female • Female to Female
  10. 10. #include <Servo.h> Servo myservo; #define buzzer 3 int sound; #define trigPin 11 #define echoPin 10 #define led 6 #define led2 4 void setup() { Serial.begin (9600); pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT); pinMode(buzzer, OUTPUT); pinMode (led, OUTPUT); pinMode(led2, OUTPUT); myservo.attach(9); } void loop() { long duration, distance; digitalWrite(trigPin, LOW); delayMicroseconds(2); digitalWrite(trigPin, HIGH); delayMicroseconds(10); digitalWrite(trigPin, LOW); duration = pulseIn(echoPin, HIGH); distance = (duration/1) / 29.1; if (distance >=0 && distance <= 20) { myservo.write(160); tone(buzzer, 3000,150); digitalWrite(led, LOW); digitalWrite(led2, HIGH); } else if (distance > 20 || distance < 0){ myservo.write(0); noTone(buzzer); Serial.println("Jarak diluar jangkauan!"); digitalWrite(led, HIGH); digitalWrite(led2, LOW); } else { Serial.print(distance); Serial.println(" cm"); } delay(250); }

×