2011 SpringTOPOTop Optoelectronic
About TOPO            History                  TOPO                  R&D Center                         Founded in 2006, T...
Products Index                                                                                                            ...
TOPO Recommended                                                                                                          ...
LED Flourescent Tube                                                                                                      ...
T8                                                                                                                        ...
T8                                                                                                                        ...
LED Bulb                                                                                                                  ...
QBX                                                                                                                       ...
LED Spot Light                                                                                                            ...
PAR30                                                                                                                     ...
Spot Light                                                                                                                ...
LED Flexible Strip                                                                                                        ...
BS                                                                                                                        ...
HBS                                                                                                                       ...
TOPO-Catalog(2011.1)
TOPO-Catalog(2011.1)
TOPO-Catalog(2011.1)
TOPO-Catalog(2011.1)
TOPO-Catalog(2011.1)
TOPO-Catalog(2011.1)
TOPO-Catalog(2011.1)
TOPO-Catalog(2011.1)
TOPO-Catalog(2011.1)
TOPO-Catalog(2011.1)
TOPO-Catalog(2011.1)
TOPO-Catalog(2011.1)
TOPO-Catalog(2011.1)
TOPO-Catalog(2011.1)
TOPO-Catalog(2011.1)
TOPO-Catalog(2011.1)
Upcoming SlideShare
Loading in …5
×

TOPO-Catalog(2011.1)

1,088 views

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
1,088
On SlideShare
0
From Embeds
0
Number of Embeds
3
Actions
Shares
0
Downloads
22
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

TOPO-Catalog(2011.1)

  1. 1. 2011 SpringTOPOTop Optoelectronic
  2. 2. About TOPO History TOPO R&D Center Founded in 2006, TOPO Co.Ltd. is a manufacture specializing Electronic Team Lighting Structure Team ID Team in the research, development and production of LED lights. It is certified with ISO 9001:2000 management system. We have 2010 two fabrication areas located in Shenzhen(with 2500 square Thermal System Team Optics System Team meters) and Zhongshan(with 5000 square meters). Factory area: 3000 m Shenzhen Factory area: 2500 m Advanced and professional equipments are utilized to aid LED Reachers: 9 2009 Zhongshan Factory area: 5000 m assemblies of LED strips, array and various luminaire. The Factory area: 3000 m Emplyees: 82 Reachers: 28 equipments include SMT assembly, auto soldering lines, opto- Reachers: 6 Emplyees: 162 electrical test devices, light and optical distribution analysis Emplyees: 51 devices. The well trained production and QC staff can assure Factory area: 1200 m Factory area: 5000 m all the lights perfect performance. All the products are CE Reachers: 2 2008 Reachers: 12 certified and RoHs compliant. Emplyees: 8 Emplyees: 112 2007 Nowadays, TOPO focuses on researching and developing LED commercial lights for household, architectural and decorative purposes. All designs strictly follow the UL and EU 2006 electrical safety standards. Moreover, our powerful engineering team can improve our OEM or ODM services for clients continuously. With prompt delivery time without any delay, we sincerely Certificate welcome customers from all over the world to cooperate with us. Contact TOPO today for lighting the world!Experts PointLED allow us to create unique, low energy lighting solutions, not tomention their lower maintenance costs and as investment continues andvolumes increase, the price of LEDs should come down by 10% or more ayear.For some time now LED lighting systems have been used to light upbuildings, bridges and monuments. Due to their flexibility and thepossibility to set any desired colour, LEDs offer lighting solutions, whichare not possible with any other existing technologies, such as colour wallwashing, sharp light/shadow lines and avoiding light pollution onwindows.Rapidly expanding R & D team of TOPO will bring the world more LEDlighting solutions. David Lin Chief Technical Officer
  3. 3. Products Index Why We Do Better TOPO Quality Control O UR PRODUCTS Order Acknowledge Prepare Material Producing Aging Good pre-service Long term cooperation Automatic Production Equipments Long time aging, increase suppliers to ensure quality to ensure the quality the lifepan and quality 36 mins and delivery of raw materials 2 hours and high efficiency 2 hours Save 24 hours Save 12 hours Save 1 hours I ABOUT TOPO ERP automatically notify the Purchasing Department, After preparing material, ERP will list program of After production, ERP automatically arrange 40 mins to prepare material the location of aging Save 2 hours production P01 LED Flourescent Tube Order Completion Logistics Production Complete Testing 3 years of sales commitment, UPS DHL Fedex TNT EMS Orders complete in time with high Rigorous testing to ensure good after-sales service is our good partner quality by strictly and the production performance professionally testing parameters P07 LED Bulb 4 hours Save 12 hours 35 mins Save 2 hours Automatic notification After testing, Express ERP arrange storage. P11 LED Spot Light TOPO Cost Control Production cost Logistics cost With automatical production lines, TOPO cooperates with several international and the introduction of the ERP express delivery companies. And we qoute system to enhance product quality, best freight. reduce production costs. P17 Flexible LED Strip After-sales cost TOPO R&D team consists of 26 researchers which provide TOPO Logistic Af with excellent designs. R&D team will ensure our 3-year-service and ter Pr reduce the maintenance cost at the -s same time. od P31 LED Downlight ale t uc en s tio s em ag n n LED Cabinet Light Ma P37 LED Ragid Strip R& ls D ia er LED Wall Washer at Management andProducts Index Why We Do Better P45 m LED Pool Light R&D cost aw R TOPO uses ERP system which will significantly enhance its management efficiency while reduce management cost. Sale Support P51 Warranty Policy Raw materials cost While ensuring the quality of raw materials, TOPO already has more than 600 optional suppliers. Improve cost control TOPO Top Optoelectronic
  4. 4. TOPO Recommended TOPO new products-panel light TP-CID-IR TP-PL-RGB TP-QBX Epistar IR Brushed Epistar Panel Future MCOB 831 Unique Sensor Metal Lighting 5050 Switch Generous 3528 Light 9W tech 7 Round LED Panel light TP-SBS TP-HBS TP-XSP Epistar 5212 Epistar 3115 Brigelux Smallest 5W 3020 brightest 3528 213lux 5W Spot light 1755lux 600MM 1200 MM LED Panel light 300MM 600 MM LED Panel light Super Bright ( 67lm/w ) LED Panel Light Descriptions Model Number Dimension(mm) Luminous Color/CCT W(width),L(length),H(heig LED Type CRI LED Qty Input Voltage LED Type Flux ht) TP-HRS TP-XT8 4th TP-PL-6C-W 1948 97lm/w 632lm 11W Epistar Epistar 1723 360 Epistar 5050 per meter 792lux 3528 18W Endcap rotate 3528 SMD High Birght Power Star panel lightProducts Index TP-CID-DL01 TP-XBS TP-SDL Epistar 360 Epistar 5875 Cree 211 Magnet 5050 brightest Installation 3528 389lux 3W 188 lux
  5. 5. LED Flourescent Tube T8 7-eleven Market Australia Very Energy Efficient Solution LED Flourescent Series Up to 70% more energy efficient than T8 & T12 flourescents Features Color in KeLvin: 2700K - 7500K Size: T8 Length: 1“-8” in length Extremely Long Life - 5 Year Guarantee Safer than Fluorescent Solid state - no glass 50,000 hours or 5.7 when on 24/7 CAPTER 1 No vacuum or pressurized vessel Up to 16 years in an office enviroment Impact and shock resistant Cool to the touch Universal Input Current 85-268V LED Flourescent Tube Recyclable No toxic mercury Simple installation No fluorescent disposal danger or costs It only takes 3 to 5 miniutes per fixture 288PSC 3528SMD 120CM Bright T8 Descriptions Model NumberLED Flourescent Tube LED Flourescent Tube Luminous Rated Color/CCT SHELL Type Dimension LED Type CRI LED Qty Input Voltage Flux Power01 02
  6. 6. T8 T8 TP-XT8-S120 240PCS 3528SMD 120CM T8 Descriptions Model Number Luminous Rated Color/CCT SHELL Type Dimension LED Type LED Qty Input Voltage Flux Power 1200mm 900mm TP-XT8-120 TP-XT8-90 1500mm 600mm TP-XT8-150 TP-XT8-150 TP-XT8-60 150CM Bright T8 Descriptions Model Number Luminous Rated Color/CCT SHELL Type Dimension LED Type LED Qty Input Voltage Flux Power TP-XT8-60 60CM Bright T8 Descriptions Model Number Luminous Rated Color/CCT SHELL Type Dimension LED Type LED Qty Input Voltage Flux Power Why Choose TOPO T8 TP-XT8-90 section 90CM Bright T8 Descriptions Model Number 1/2 round 2/3 round Luminous Rated Color/CCT SHELL Type Dimension LED Type LED Qty Input Voltage Flux Power Before After luminous efficacy 2/3 round 1/2 roundLED Flourescent Tube LED Flourescent Tube 4th XT8 heat dissipation Additional effective heat dissipation area 73 4508 43 2649 43 2649 69 76 Two thirds of the circle, the heat dissipation area is lagest in the market. The additional effective heat dissipation area increases 69% and the speed of heat dissipation increases 50% at the same time. In this way, the LED in the lowest consumption and reach the longest life span.03 04
  7. 7. T8 T8 TOPO LED T8 TUBE INTERNAL STRUCTURE AND THE INSTALLATION TP XT8-120C-W TP XT8-120C-WW TP XT8-120W-W TP XT8-120W-WW TP XT8-120F-W TP XT8-120F-WW TYPE A 1M 612Lux 543Lux 572Lux 541Lux 421Lux 418Lux wire conect two bin LED DRIVER 2M 173Lux 152Lux 171Lux 143Lux 131Lux 125Lux 3M 92Lux 81Lux 79Lux 75Lux 63Lux 63Lux LED T8 STARTER LED T8 STARTER Fluorescent STARTER STEP ONE: Replace Fluorescent starter with LED T8 Starter (TOPO will send it to TOPO TOPO T8 4100K LED in comparison customer free) with CALiPER T8 LED test samples Fluorescent CALiPER Total Power Output Efficacy CCT CRI Ballast Test ID Watts Initial Lumens lm W K AC 85-240V STEP TWO: Replace Fluorescent with LED T8 Tube 08 121 49 1579 32 3667 75 09 13AB 32 1407 44 3758 76 LED T8 TUBE LED DRIVER 09 13CD 32 1357 42 3756 76 09 17 16 1062 66 4657 72 09 39 16 1108 69 3182 66 09 40 16 1218 76 3221 66 09 46 27 1198 45 3394 64 LED T8 TUBE LED DRIVER 09 48 18 1136 64 2993 63 avg 26 1258 55 3579 70 Ballast TOPO T8 AC 85-240V 17 65 1729 98 4271 63 TYPE B 4100K LED Lamp LED DRIVER Lamp Replacement Compliance Label THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED STEP ONE: Remove Fluorescent starter WARNING Risk of fre or electric shock The electrical rating of these products are 100 277 Vac the installer must determine whether they have 85 268 V at the luminare before installation Fluorescent WARNING Risk of fre or electric shock Refector kit installation requires knowledge of fuorescent lighting luminaires Ballast electrical systems If not qualifed do not attempt installation Contact a qualifed electrician AC 85-240V WARNING To prevent wiring damage or abrasion do not expose wiring to edges of sheet metal or other sharp objects STEP TWO: Replace Fluorescent with LED T8 Tube The end retroft luminaire has been modifed and can no longer operate the originally intended lamp LED T8 TUBE LED DRIVERLED Flourescent Tube LED Flourescent Tube WARNING Risk of fre or shock Do not use this retroft kit in luminaires employing shunted bi pin lampholders Note Shunted lamp holders are found only in fuorescent luminaires with Instant Start ballasts Instant start ballasts can be identifed by the words Instant Start or I S marked on the ballast This designation may be in the form of a statement pertaining to the ballast itself or may be combined with the marking for the lamps with which the ballast is intended to be used for example F40T12 IS LED T8 TUBE LED DRIVER THE RETROFIT ASSEMBLY IS ACCEPTED AS A COMPONENT AS A FLUORESCENT LUMINAIRE WHERE THE SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY CSA OR AUTHORITIES HAVING JURISDICTION Ballast • The retroft kit is suitable to be installed in an IC recessed ceiling mounted luminaire enclosed with a diffuser having a maximum of 4 LED tube lights • The retroft kit is not suitable to be used with emergency exit luminaires AC 85-240V • For more information contact the LED luminaire retroft kit manufacturer05 06
  8. 8. LED Bulb QB04 It has no welding points and t he whole structure does not use any glue and chemicals. Heat dissipating surface is increased It is eco-friendly by 30% than before PT design, let the base of QB04 more firm Transmittance of lampshade greater than 92% You can put your logo here New material with compressive property and hardness PE(power efficency) > 78% PF(power factor) > 90% 167.50/334.54lx TP-QB LED (CRI>90) BULB 41.8/96.13lx GIVES YOU NEW FEELING OF READING 18.61/42.72lx Plastic 10.47/24.03lx Shade 4.65/10.64lx CAPTER 2 LED BULB 170.85/317.54lx 42.71/94.30lx 6.5W 431 324lux >85 B22 Gu10 Attention: The base of this product can according to customer’s order 18.98/41.91lx 10.68/23.57lx Feature Replace a incandescent lamp and drop from 40W to 6.5WLED Bulb LED Bulb 4.74/10.47lx High-CRI Protect your eyes, reduce your fatigue when reading Patent design, TP-QB04 is so far the hightest CRI avialable in the market Rated Power Luminous Working Model Color LED Type CCT Consumption CRI Flux 2.0M Voltage Beam Angle Weight07 08
  9. 9. QBX QBQ unite: mm TP-QBX Series The Brightest LED Bulb 831 LM 9W MCOB 5 Years The brightest The smallest The best LED bulb 9w LED bulb Thermal solution Warranty heat conduction way 56 56 Old Version LED Bulb LED Chip 3528 AC Driver 5.0W Aluminium base 100-266V Incl Gu5.3 Descriptions Model Max Power Number Color LED Type Light Output Base Voltage (V ) CCT CRI Consumptio (lumen/m) n(W/m) New Version QBX 52.6 C (over 36 hours) Heat rate increase by 60 White 58.6 C (over 36 hours) Warm White 0.5M 1313 0.5M 1713 Great advantage Feature 1.0M 304 1.0M 323 Cree AC Driver Replace a incandescent lamp and drop from 100-266V Incl 15W to 3W 64lm / 1$ the best cose-effective 2.0M 63 2.0M 73 Cree made my life more durable and up to Can replace a 45 watt incandescent 3W 50 000 hours E14 TP QBX 7-W TP QBX 9-W Candle lights designed, your life is full of Very long operating life romance RoHS compliant 0.5M 1225 0.5M 1645 Instan light(less than 100ns) unite: mm 1.0M 294 1.0M 314 95 0 More competive price give you more chance to share the colorful wordl 2.0M 67 2.0M 69 TP QBX 7-WW TP QBX 9-WW Dimmia Model Number Color LED Type Lumen Base Voltage (V ) CCT CRI Power bleLED Bulb LED Bulb White TP-QBC-W TP-QBC-W Warm White Rated Power Luminous Working Model Color LED Type CCT CRI Beam Angle Weight White Consumption Flux Voltage Warm White Cree 3w 3 0W White Cree 3w 3 0W Warm White09 10
  10. 10. LED Spot Light PAR30 Chow Tai Seng HongKong Solution LED Spot Light Series TP-PAR30-5W TP-PAR30-7W CAPTER 3 LED Spot LightLED Spot Light LED Spot Light Descriptions Model Number Light Output Light Output Beam Angle Color LED Type (Lux from a CRI Voltage(V) (lumen) (dagrees) meter) White Warm White White Warm White11 12
  11. 11. PAR30 Spot Light TP-PAR30-9W TP-PAR30-12W Feature 25 LENS A 12 volt MR16 lamps with GU5.3 bi-pin standard base 90 LENS B 110 volt MR 16 lamps with GU10 turn and lock base Ideal for replacing Halogen MR16 and GU10′s in track and open fixtures in retail and office environments. 45 Application All kinds of exhibitoin halls,store lighting,car showroon,brand authorized store,department store,supermarket,museum,hall of office building and all places requiring exhibition lighting 65 Feature Replace a PAR30 and drop from 75W to 8W Energy Busters – Replace flood or spot lights and save up to 90% of your energy Available in 5W PAR 16, 6W PAR 20, 8W PAR 30 and 15W PAR 38 Light Color Descriptions Correlated Color Temperature CCT in Kelvin K Light Output Model Number Light Output Beam Angle Color LED Type (Lux from a CRI Voltage (V) (lumen) (dagrees) meter) White Warm White Warm White White Warm White Pure White Cool White Warm White 2700K 3000K 4000K 6500K 9000K White Warm White DescriptionsLED Spot Light LED Spot Light Model Number Light Output Light Output Beam Angle Color LED Type (Lux from a CRI Voltage(V) White (lumen) (dagrees) meter) Warm White White White Warm White Warm White White White Warm White Warm White13 14
  12. 12. Spot Light Spot Light 25 LENS A 90 LENS B 45 55 25 LENS A 90 LENS B Descriptions Model Number Light Output Light Output Beam Angle warm white white Color LED Type (Lux from a CRI Voltage (V) (lumen) (dagrees) meter) White Descriptions Warm White Model Number Light Output Light Output Beam Angle Color LED Type (Lux from a CRI Voltage (V) White (lumen) (dagrees) meter) Warm White warm white White White Warm White Warm White White Warm White White White Warm White Warm White White Warm White 38 white Features Low power consumption, Descriptions Environment protection, low voltage, Safe and easy for installation. Model Number Light Output Color LED Type (Lux from a CRI Light Output Beam Angle Voltage (V) Long life span. (lumen) (dagrees) Dimensions: 34.5*38 mm meter) Average life time: 50, 000 hours White Material: Glass, PC, high quality alloy material for radiation function Warm White Application White All kinds of exhibitoin halls,store lighting,car showroon,brand authorized Warm White store,department store,supermarket,museum,hall of office building and all places requiring exhibition lighting WhiteLED Spot Light LED Spot Light Warm White White Descriptions Warm White Model Number Light Output Light Output Beam Angle White Color LED Type (Lux from a CRI Voltage (V) (lumen) (dagrees) meter) Warm White White White Warm White Warm White15 16
  13. 13. LED Flexible Strip SBS SBS series make me surprised. Five meters SBS flexible strip with 5212LM (max) brightness which makes my ideas come into reality.( New World Hotel Beijing) Nancy Lighting Designer Connectors for cut CAPTER 4 Flexible LED Strip 338 307 172 142 103 86LED Flexible Strip LED Flexible Strip 500mm 20 Luminance white 6500K 500mm 20 Luminance warm white 3200K Length LED Light Output Light Output Beam Angle Voltage Current Max Power Continuous Model Number Color LED Type Consumption Connection m Q ty mcd lumen degrees V C Amps W m TP SBS W White 5 600 Power 3500 X 600 5212 120 12 7.5 90 5 SMD TP SBS WW Warm White 5 600 Top LED 3000 X 600 3967 120 12 7.5 90 517 18
  14. 14. BS BS Assembly Information Application The base of the strip is distributed with several strips which with lots of two-side adhesive on the back surface. A clean and dry installation place is required. Make sure the surface of installation place is smooth. Remove the adhesive backing completely. When the strip is assembled 2 appropriately, press the strip with 20N/cm The minimum of bending radius is 2cm. The strip can be bent to a smaller radius of circuit board without electronic components which can avoid damage. Great advantages Soldering can only be operated on the corresponding soldering pads (marked “+/-). Make sure the soldering time does not surpass 10 seconds and the temperature does not exceed 260 degrees during soldering. Linking operation A unit is consisting of 3 leds and each unit can be cut (cut in the position remarked with a scissor). Connectors Packing information Safety Information The strip and its components can not be mechanically pressed. Correct electrical polarity needs to be observed. Ensure the power is adapt to operate the total load. Installation must not damage the conducting paths on the circuit board.LED Flexible Strip LED Flexible Strip Parallel connection is highly required as safe electrical operation mode. Pay attention to ESD precautions during assembling. Assembly of LED modules includes power supplier must be appropriately. When installing on metallic or other surface, an electrical isolation point between strip and the installing surface is recommended. Only qualified person allowed to operate installations. Damaged by corrosion will not be materials defect claim. It is the users responsibility to provide a suitable protection against moisture, condensation and other harmful elements.19 20
  15. 15. HBS XBS Dimension drawing Unit mm Packing information The applications of XBS XBS contains 2 lines of high brightness SMD LEDs on a 16mm wide FPC board like other TOPO flexible strips. The XBS is 5m a reel and it stands out for its remarkable light output. Each meter of XBS is CCT 6000K which gives more than 1000 lumens while the whole strip gets no heat at the same time. White color CCT3000K, 4000-4500K and 6000K and other colors are also offered to customers. It will be considered as a excellent light source for signage, contour and canopy for decorative purpose without hesitation. XBS can be easily used by end users who are not professors. Costumers can cut the strip along the marks on PCB and do the join work again with our Application connector. In this way no length of XBS will be wasted. Costumers can install XBS around any corners with our L and T shape connector. Dimension drawing Unit mm General Information The base of the strip is distributed with several strips which with lots of two-side adhesive on the back surface. A clean and dry installation place is required. Make sure the surface of installation place is smooth. Remove the adhesive backing completely. When the strip is assembled appropriately, press the strip with 20N/cm2 Soldering can only be operated on the corresponding soldering pads (marked “+/-). Make sure the soldering time does not surpass 10 seconds and the temperature does not exceed 260 degrees during soldering. The minimum of bending radius is 2cm. The strip can be bent to a smaller radius of circuit board without electronic components which can avoid damage. A unit is consisting of 6 leds and each unit can be cut (cut in the position remarked with a scissor). 16mm width of Ribbon. LED distance 8.3mm and cut section length 50mm. Packing material is hot-sealing film bag XBS Accessories 3m adhesive tape on ribbon backside. 5m as the standard packing lengthLED Flexible Strip LED Flexible Strip Safety instruction Correct electrical polarity needs to be observed. The strip and its components can not be mechanically pressed. Installation must not damage the conducting paths on the circuit board. Ensure the power is adapt to operate the total load. Assembly of LED ribbon includes power supplier must be appropriately. Only qualified person allowed to operate installations. Pay attention to ESD precautions during assembling. Serial connection is not recommended. Unbalanced voltage change will cause overload and damage of the strip. When installing on metallic or other surface, an electrical isolation point between strip and the installing surface is recommended. Damaged by corrosion will not be materials defect claim. It is the users responsibility to provide a suitable protection against moisture, condensation and other harmful elements.21 22

×