Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

jumpwire.io - IoT platform for Makers

12,671 views

Published on

Connect your Arduino to the cloud in 5 minutes, And make your IoT project succeed.

Published in: Technology
  • Follow the link, new dating source: ♥♥♥ http://bit.ly/39pMlLF ♥♥♥
       Reply 
    Are you sure you want to  Yes  No
    Your message goes here
  • Dating for everyone is here: ♥♥♥ http://bit.ly/39pMlLF ♥♥♥
       Reply 
    Are you sure you want to  Yes  No
    Your message goes here

jumpwire.io - IoT platform for Makers

  1. 1. Quick start
  2. 2. Setup hardware ● Arduino UNO ● ESP8266 wifi module
  3. 3. Download the framework ● https://github.com/jumpwire-io/Arduino-ESP8266/archive/master.zip ● Unzip and rename it to Arduino-ESP8266
  4. 4. Open Arduino-ESP8266.ino
  5. 5. Copy & paste sample code ● https://gist.github.com/028a705e7bc4be59f76b
  6. 6. Get your secret token ● https://console.jumpwire.io/
  7. 7. Set token, wifi ssid, wifi password
  8. 8. When uploading the code, temporarily disconnect PIN 0 (Arduino's RX pin) to avoid error. Upload the code to Arduino
  9. 9. Cut off power and reconnect ● This means resetting Arduino and ESP8266 at the same time ● It will be connected to the jumpwire.io server within 15 seconds.
  10. 10. ● Throw “1” from the console, LED will turn ON. ● Throw “0” from the console, LED will turn OFF. Test it
  11. 11. Blinking?
  12. 12. Congrats!
  13. 13. ● http://docs.jumpwire.io/ ○ How it works ○ How to Throw a message from Arduino ○ Troubleshooting For more info Thanks

×