Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.
A S P E C T S t o AVOID during the wrapping process of pallets and “fast-first-aid”…          by José-Luis#1- Adhesive fac...
Upcoming SlideShare
Loading in …5
×

Things to avoid during the wrapping process of loads on pallets

406 views

Published on

Aspects to avoid during wrapping process of loads on pallets and fast first aid

  • Be the first to comment

  • Be the first to like this

Things to avoid during the wrapping process of loads on pallets

  1. 1. A S P E C T S t o AVOID during the wrapping process of pallets and “fast-first-aid”… by José-Luis#1- Adhesive face of the film on the external side of pallet• Invert the position of the reel in the pre-stretch head#2- Initial/final “tails of film”• Film Tail system (initial set up/weld-cut) is not working properly#3- “Damaged corners” on the secondary packaging• The proportion between %F1 vs. %F2 must be adjusted according to the kind/fragility of the load#4- “Pyramid effect” on pallet• See point #3 + Assess the slenderness grade of the load (max 2)#5- “Tiger – bands” on film• Slippage of film between the pre-stretch rolls. Assess % of slippage R1 vs. R2• Minimize its effect and coordinate with F1+F2+accceleration ramps in variators#6- Load “slips” on the pallet• Lost of vertical force vectors. Does the film wraps 3-4cm of the pallet?#7- Film lies on the load “without tension”• Very slow turning speed of the pallet (or pre-stretch head)• Coordinate it with the pre-stretch level and acceleration ramps of variators Are your pallets suffering of any of these symptoms? Are you really committed to solve them forever? We offer you a FREE DIAGNOSE of your tertiary packaging wrapping process!!! jlg@valueing.net

×