Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

510 material handling rigging 2015

448 views

Published on

just a ppt guide to most cited standards in this subpart

Published in: Government & Nonprofit
  • Be the first to comment

  • Be the first to like this

510 material handling rigging 2015

  1. 1. OSHA Office of Training & Education 1 Safety Standards for Material Handling and Rigging Only standards cited 5 times were included
  2. 2. MATERIALS STORED TO PREVENT SLIDING FALLING, OR COLLAPSE 9 9 10 17 18 251(a)(2)(i) 250(a)(1) 251(b)(1) 251(a)(1) 252(a) Materials Handling, Storage, Use & Disposal [1926.250 – 252] 2 GENERAL RIGGING EQUIPMENT IDENTIFICATION EXTERIOR DROP CHUTES RIGGING EQUIPMENT INSPECTION & REMOVAL FROM SERVICE WELDED ALLOY STEEL CHAIN SLING IDENTIFICATION SUBPARTH
  3. 3. General • All materials stored in tiers shall be stacked, racked, blocked, interlocked, or otherwise secured to prevent sliding, falling or collapse 1926.250(a)(1)
  4. 4. Rigging • Rigging equipment for material handling shall be inspected prior to use on each shift and as necessary during its use to ensure that it is safe. • Defective rigging equipment shall be removed from service. 1926.251(a)(1)
  5. 5. Rigging • Not be loaded in excess of its recommended safe working load as prescribed on the identification markings by the manufacturer; 1926.251(a)(2)(ii)
  6. 6. Rigging • Each day before being used, the sling and all fastenings and attachments shall be inspected for damage or defects by a competent person designated by the employer. • Damaged or defective slings shall be immediately removed from service 1926.251(a)(6)
  7. 7. Rigging • Welded alloy steel chain slings shall have permanently affixed durable identification stating size, grade, rated capacity, and sling manufacturer. 1926.251(b)(1)
  8. 8. Rigging • The employer shall make and maintain a record of the most recent month in which each alloy steel chain sling was thoroughly inspected, and shall make such record available for examination 1926.251(b)(6)(ii)
  9. 9. Rigging • Wire rope slings shall have permanently affixed, legible identification markings stating size, rated capacity for the type(s) of hitch(es) used and the angle upon which it is based, and the number of legs if more than one. 1926.251(c)(16)
  10. 10. Disposal • Whenever materials are dropped more than 20 feet to any point lying outside the exterior walls of the building, an enclosed chute of wood, or equivalent material, shall be used. 1926.252(a)

×