1.
PRODUCED BY AN AUTODESK STUDENT PRODUCT PRODUCED BY AN AUTODESK STUDENT PRODUCTPRODUCED BY AN AUTODESK STUDENT PRODUCT G1.1 GENERAL NOTES A2.4 EAST ELEVATION RIVER FRONT HOUSE A1.1 FLOOR PLAN A3.1 BUILDING SECTION DFTG 1492 - Architectural Drafting: Advanced Residencial A1.2 ROOF PLAN A3.2 BUILDING SECTION Austin Community College A2.1 NORTH ELEVATION A4.1 WALL SECTIONS A2.2 SOUTH ELEVATION A5.1 DETAILS Created By: Dalton Bledsoe A2.3 WEST ELEVATION E1.1 ELECTRICAL & LIGHTING PLAN May 10, 2010 PRODUCED BY AN AUTODESK STUDENT PRODUCT

2.
PRODUCED BY AN AUTODESK STUDENT PRODUCT PRODUCED BY AN AUTODESK STUDENT PRODUCTPRODUCED BY AN AUTODESK STUDENT PRODUCT PRODUCED BY AN AUTODESK STUDENT PRODUCT

3.
PRODUCED BY AN AUTODESK STUDENT PRODUCT PRODUCED BY AN AUTODESK STUDENT PRODUCTPRODUCED BY AN AUTODESK STUDENT PRODUCT TOP OF ROOF 14 - 7" TOP OF PARAPET 11 - 0" TOP PLATE HEIGHT 10 - 0" BATH LIVING ROOM DINING ROOM FLOOR 0 - 0" FOUNDATION -2 - 1" EAST TO WEST BUILDING SECTION 1 1/4" = 1-0" 8/21/2010 12:52:19 PM No. Description Date DALTON BLEDSOE BUILDING SECTION Project number 1 248 RIVER FRONT DRIVE Date Drawn by May 12, 2010 D BLEDSOE A3.1 www.autodesk.com/revit Checked by Scale 1/4" = 1-0" PRODUCED BY AN AUTODESK STUDENT PRODUCT

4.
PRODUCED BY AN AUTODESK STUDENT PRODUCT PRODUCED BY AN AUTODESK STUDENT PRODUCTPRODUCED BY AN AUTODESK STUDENT PRODUCT TOP OF ROOF 14 - 7" TOP OF PARAPET 11 - 0" TOP PLATE HEIGHT 10 - 0" KITCHEN DINING ROOM BEDROOM FLOOR 0 - 0" FOUNDATION -2 - 1" NORTH TO SOUTH BUILDING SECTION 1 1/4" = 1-0" 8/21/2010 12:52:21 PM No. Description Date DALTON BLEDSOE BUILDING SECTION Project number 1 248 RIVER FRONT DRIVE Date Drawn by May 12, 2010 Author A3.2 www.autodesk.com/revit Checked by Checker Scale 1/4" = 1-0" PRODUCED BY AN AUTODESK STUDENT PRODUCT

5.
PRODUCED BY AN AUTODESK STUDENT PRODUCT METAL STANDING SEAM ROOF 2x6 WOOD ROOF TRUSS @ 24" O.C. 5 1/2" POLYISOCYANURATE INSULATION 12 2 PRODUCED BY AN AUTODESK STUDENT PRODUCTPRODUCED BY AN AUTODESK STUDENT PRODUCT 1 A5.1 3 1/8" GLULAM BLEAM 8x8 STRUCTURAL WOOD COLUMN STOREFRONT WINDOW SYSTEM HARDWOOD FLOORING OVER 2x2 SLEEPERS 1 1/2" RIGID INSULATION 2 A5.1 Living Room Roof 2 1/2" = 1-0" 8/21/2010 12:52:22 PM No. Description Date DALTON BLEDSOE WALL SECTIONS Project number 1 248 RIVER FRONT DRIVE Date Drawn by May 12, 2010 Author A4.1 www.autodesk.com/revit Checked by Checker Scale 1/2" = 1-0" PRODUCED BY AN AUTODESK STUDENT PRODUCT

6.
PRODUCED BY AN AUTODESK STUDENT PRODUCT 0 - 5 1/4" 3/4" PLYWOOD SHEATHING BLOCKING METAL DRIP EDGE WRAPPED PRODUCED BY AN AUTODESK STUDENT PRODUCTPRODUCED BY AN AUTODESK STUDENT PRODUCT MEMBRANE WOOD FASCIA TO MATCH STOREFRONT SYSTEM BACKER ROD AND SEALANT BLOCKING AS REQUIRED 2x2 WOOD SLEEPERS SUSPENDED CEILING TO ALLOW DUCTWORK AND RECESSED LIGHTING HARDWOOD FLOORINGS RETRACTABLE WINDOW SCREEN 1 1/2" RIGID INSULATION BLOCKING AS REQUIRED BACKER ROD AND SEALENT 60-MIL THICK POLYETHYLENE WATERPROOF MEMBRANE , TYP. WRAP AROUND BOTTOM OF BEAM Detail - Living Room Roof 1 1 1/2" = 1-0" Detail - Living Room Foundation 2 1 1/2" = 1-0" 8/21/2010 12:52:23 PM No. Description Date DALTON BLEDSOE DETAILS Project number 1 248 RIVER FRONT DRIVE Date Drawn by May 12, 2010 D BLEDSOE A5.1 www.autodesk.com/revit Checked by Scale 1 1/2" = 1-0" PRODUCED BY AN AUTODESK STUDENT PRODUCT

7.
www.autodesk.com/revit A202 1 OAK STREET OFFICES 1 2 3 4 5 6 7 8 9 125 - 5" STERLING COOPER 18 - 5" 18 - 0" 18 - 0" 23 - 0" 12 - 0" 9 - 0" 21 - 5" 5 - 7" 4 - 6" 5 - 0" 5 - 0" 3 - 11" 9 - 0" 9 - 0" 4 - 0" 5 - 0" 5 - 0" 4 - 0" 3 - 3" 4 - 3" 9 - 6" 6 - 0" 4 - 3" 4 - 3" 3 - 6" 6 - 0" 6 - 0" 9 - 5" 2 3 A301 V1 U1 T1 A301 R1 Q1 P1 Room Legend 103 102 A 5 - 7" S1 O1 N1 M1 L1 K1 Break Room B Conference Room 16 - 6 11/16" 16 - 6 11/16" Break Room Conference Room Elevator 16 - 0" Open Office 111 112 110 Lobby 100 Jan. 100 114 Lobby MEDIA, 7 - 10 3/4" 111 C Mens 7 - 10 3/4" 1 A201 6 - 0 9/16" 1 - 11 5/8" 106 2 - 11 7/8" 101 Restroom 14 - 0 5/8" 13 - 6 1/2" 13 - 6 1/2" 7 - 5 15/16" 10 - 11 13/16" 11 - 0 7/16" 11 - 0 1/4" 8 - 10 1/16" 7 - 1" 5 - 4 11/16" 6 - 8" 52 - 5" 16 - 5" Office 4 - 6 3/16" 113 109 8 - 6 1/4" Server 119 112 108 107 Open Office 113 Jan. 110A201 2 104 Server 118 117 116 115 Mens Womens D Office Office Office Office Restroom Restroom 1 109 108 107 106 Storage & Files 103 102 A301 Storage & Files No. Description Date 18 - 8 1/8" 14 - 5" 105 104 Womens Restroom Elevator 101 105 E A1 B1 C1 D1 E1 F1 G1 H1 I1 J1 9 - 5" 4 - 0" 7 - 0" 4 - 0" 7 - 0" 4 - 0" 9 - 6" 13 - 0" 10 - 0" 10 - 0" 4 - 6" 4 - 6" 21 - 5" 5 - 7" 2 - 6" 2 - 6" 2 - 6" 2 - 0" 2 - 0" GROUND FLOOR PLAN 2 1/8" = 1-0" 2 A202 STERLING COOPER MEDIA, OAK STREET OFFICES GROUND FLOOR ISSUE DATE MAY 13, 2010 DRAWN BY D. BLEDSOE AUSTIN COMMUNITY COLLEGE DFTG - 2428 ARCH COMM DFTG 5/13/2010 11:02:44 AM SPRING 2010 A101 Scale 1/8" = 1-0"

8.
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT 4 3 2 1 Parts List ITEM QTY PART NUMBER DESCRIPTION 1 1 SHAFT STEEL 11 2 1 BUSHING BRONZE 3 1 O RING RUBBER 10 4 1 PRESSURE END STEEL 9 5 2 O RING(LARGE) RUBBER 6 1 O RING(PISTON) RUBBER 7 1 PISTON RUBBER 5 B 8 1 BODY STEEL B 9 1 WORKING END STEEL PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCTPRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT 10 4 FLAT WASHER .375 X .875 X .0781 11 4 HEX HEAD BOLT .3125-24UNC X 6.500 8 7 6 5 4 3 2 1 A A TOLERANCES: UNLESS OTHERWISE NOTED: AIR CYLINDER ASSEMBLY .X `.05 ALL DIMS IN INCHES y INCLUDE .XX`.02 CHEM. APPLIED FINISH/PLATING. SCALE: NTS D. BLEDSOE REMOVE ALL BURRS AND SHARP DATE: 4/30/08 .XXX`.01 EDGES. DO NOT SCALE DRAWING. AUSTIN COMMUNITY COLLEGE .XXXX`.005 MATL: MATL: SHEET: ANGLES`1 DFTG 1433.11239 1 OF 7 4 3 2 1

9.
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT 4 3 2 1 0.50 5/8-11 UNC - 2B x 0.40 B B PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCTPRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT D 1.1875 n1.875 0.50 n2.25 E 1.375 0.155 95° n0.34 THRU 0.19 4 PLACES n1.00 n2.47 2.75 2.125 1.375 0.44 E SECTION E-E 2.13 SECTION D-D SCALE 1 2.75 SCALE 1 A A AIR CYLINDER- PART 1: WORKING END NOTES: ONE REQUIRED TOLERANCES: MATERIAL- STEEL .X `.05 UNLESS OTHERWISE NOTED: WORKING END ALL DIMS IN INCHES y INCLUDE .XX`.02 CHEM. APPLIED FINISH/PLATING. SCALE: 1:1 D. BLEDSOE REMOVE ALL BURRS AND SHARP EDGES. DATE: 4/30/08 .XXX`.01 DO NOT SCALE DRAWING. AUSTIN COMMUNITY COLLEGE .XXXX`.005 MATL: MATL: SHEET: ANGLES`1 DFTG 1433.11239 2 OF 7 4 3 2 1

10.
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT 4 3 2 1 B B PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCTPRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT 1.375 n0.344THRU 1.50 0.25 B 4 PLACES 0.875 C 0.50 0.19 0.155 n1.25 n0.50 THRU n0.75 CBORE n2.75 1.045 DP n2.47 n1.88 4.00 3.375 n2.25 n0.25 x 0.63 5/8-11 UNC - 2B x 0.40 2.00 A SECTION B-B A 0.3125 0.3125 2.125 C 0.44 SCALE 1 SECTION C-C 2.75 SCALE 1 TOLERANCES: UNLESS OTHERWISE NOTED: PRESSURE END .X `.05 ALL DIMS IN INCHES y INCLUDE .XX`.02 CHEM. APPLIED FINISH/PLATING. SCALE: 1:1 D. BLEDSOE AIR CYLINDER- PART 2: PRESSURE END REMOVE ALL BURRS AND SHARP EDGES. DATE: 4/30/08 .XXX`.01 NOTES: ONE REQUIRED DO NOT SCALE DRAWING. AUSTIN COMMUNITY COLLEGE .XXXX`.005 MATERIAL- STEEL MATL: MATL: SHEET: ANGLES`1 DFTG 1433.11239 3 OF 7 4 3 2 1

11.
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT 4 3 2 1 0.2275 0.625 B B 0.17 n1.75 PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCTPRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT n1.996 .03 x 45° CHAM 2 PLACES 3/8-16 UNC - 2B .550 DP A A AIR CYLINDER- PART 3: PISTON NOTES: ONE REQUIRED MATERIAL- RUBBER TOLERANCES: UNLESS OTHERWISE NOTED: PISTON .X `.05 ALL DIMS IN INCHES y INCLUDE CHEM. APPLIED FINISH/PLATING. SCALE: 1:1 D. BLEDSOE .XX`.02 REMOVE ALL BURRS AND SHARP DATE: 4/30/08 .XXX`.01 EDGES. DO NOT SCALE DRAWING. AUSTIN COMMUNITY COLLEGE .XXXX`.005 MATL: MATL: SHEET: ANGLES`1 DFTG 1433.11239 4 OF 7 4 3 2 1

12.
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT 4 3 2 1 B B PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCTPRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT 0.375 0.25 8.00 0.75 0.625 n0.50 0.625 0.50 0.25 5/16-18 UNC - 2A A A AIR CYLINDER- PART 4: SHAFT TOLERANCES: NOTES: ONE REQUIRED .X `.05 UNLESS OTHERWISE NOTED: SHAFT ALL DIMS IN INCHES y INCLUDE MATERIAL- STEEL CHEM. APPLIED FINISH/PLATING. SCALE: 1:1 D. BLEDSOE .XX`.02 REMOVE ALL BURRS AND SHARP DATE: 4/30/08 .XXX`.01 EDGES. DO NOT SCALE DRAWING. AUSTIN COMMUNITY COLLEGE .XXXX`.005 MATL: MATL: SHEET: ANGLES`1 DFTG 1433.11239 5 OF 7 4 3 2 1

13.
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT 4 3 2 1 B B PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCTPRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT n2.247 5.625 n2.00 .04 x 21° CHAM 4 PLACES A A AIR CYLINDER- PART 5: BODY NOTES: ONE REQUIRED TOLERANCES: UNLESS OTHERWISE NOTED: BODY MATERIAL- STEEL .X `.05 ALL DIMS IN INCHES y INCLUDE CHEM. APPLIED FINISH/PLATING. SCALE: 1:1 D. BLEDSOE .XX`.02 REMOVE ALL BURRS AND SHARP DATE: 4/30/08 .XXX`.01 EDGES. DO NOT SCALE DRAWING. AUSTIN COMMUNITY COLLEGE .XXXX`.005 MATL: MATL: SHEET: ANGLES`1 DFTG 1433.11239 6 OF 7 4 3 2 1

14.
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT 4 3 2 1 B B PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCTPRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT 0.875 n0.75 n0.50 THRU AIR CYLINDER- PART 7: HEX HEAD BOLT NOTES: FOUR REQUIRED SIZE: .3125-24UNC X 6.500 AIR CYLINDER- PART 8: FLAT WASHER NOTES: FOUR REQUIRED SIZE: .375 X .875 x .0781 AIR CYLINDER- PART 9: AIR FITTING AIR CYLINDER- PART 6: BUSHING A NOTES: ONE REQUIRED A MATERIAL- BRONZE TOLERANCES: UNLESS OTHERWISE NOTED: BUSHING .X `.05 ALL DIMS IN INCHES y INCLUDE .XX`.02 CHEM. APPLIED FINISH/PLATING. SCALE: 3:1 D. BLEDSOE REMOVE ALL BURRS AND SHARP EDGES. DATE: 4/30/08 .XXX`.01 DO NOT SCALE DRAWING. AUSTIN COMMUNITY COLLEGE .XXXX`.005 MATL: MATL: SHEET: ANGLES`1 DFTG 1433.11239 7 OF 7 4 3 2 1

15.
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT 4 3 2 1 Parts List ITEM QTY PART NUMBER DESCRIPTION 1 1 Top 2 1 BOTTOM 1 3 8 LEG 4 4 LEG BRACE 5 6 SPINDLE 6 48 Wood Screw Flat Head Wood Screw Flat Head 4 Slotted 6 X 1" Slotted B B PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCTPRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT 5 6 2 3 A A TOLERANCES: .X `.05 UNLESS OTHERWISE NOTED: END TABLE ASSEMBLY ALL DIMS IN INCHES y INCLUDE .XX`.02 CHEM. APPLIED FINISH/PLATING. SCALE: NTS D. BLEDSOE REMOVE ALL BURRS AND SHARP DATE: EDGES. 5/7/08 .XXX`.01 DO NOT SCALE DRAWING. AUSTIN COMMUNITY COLLEGE .XXXX`.005 MATL: MATL: SHEET: ANGLES`1 DFTG 1433.11239 1 OF 7 4 3 2 1

16.
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT 4 3 2 1 0.75 B B PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCTPRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT 16x n0.25 THRU 35.00 PART 1- TOP MATERIAL: AB PLYWOOD ONE REQUIRED 2.50 A 4.25 A 35.00 3.38 TOLERANCES: UNLESS OTHERWISE NOTED: TOP .X `.05 ALL DIMS IN INCHES y INCLUDE CHEM. APPLIED FINISH/PLATING. SCALE: NTS D. BLEDSOE .XX`.02 REMOVE ALL BURRS AND SHARP DATE:5/7/08 .XXX`.01 EDGES. DO NOT SCALE DRAWING. AUSTIN COMMUNITY COLLEGE .XXXX`.005 MATL: MATL: SHEET: ANGLES`1 1433.11239 DFTG 2 OF 7 4 3 2 1