Learning Objectives                                • Arcs and its various options.                                • Rectan...
 DRAWING ARCS                                  Ribbon:     Home > Draw Arc drop-down                                  Too...
The 3-Point Option                                The Start, Center, End Option                                The Start, ...
 DRAWING RECTANGLES                                 Ribbon:          Home > Draw > Rectangle                             ...
Drawing Rectangles by Specifying Two Opposite Corners                                Drawing Rectangles by Specifying the ...
 DRAWING ELLIPSES                                 Ribbon: Home >   Draw >Ellipse drop-down                               ...
Drawing an Ellipse Using the Axis and Endpoint Option3. Starting with the Advanced                                        ...
Drawing Ellipse Using the Center Option3. Starting with the Advanced                                                  Draw...
Drawing Elliptical Arcs                                  Ribbon: Home >   Draw > Ellipse drop-down > Elliptical Arc       ...
 DRAWING REGULAR POLYGONS                                 Ribbon: Home >   Draw > Polygon                                ...
Drawing a Polygon by Specifying the Center of Polygon3. Starting with the Advanced   Sketching                            ...
Drawing a Polygon by Specifying an Edge3. Starting with the Advanced                                               Drawing...
 DRAWING POLYLINES                                 Ribbon: Home >   Draw > Polyline                                 Toolb...
Next Point of Line            Halfwidth                                Width                Line3. Starting with the Advan...
 DRAWING DONUTS                                 Ribbon: Home > Draw > Donut                                 Command:     ...
Example 13. Starting with the Advanced                                    Unfilled donut   Filled donut   Solid-filled don...
 PLACING POINTS                                 Changing the Point Style and Size3. Starting with the Advanced           ...
Placing Multiple Points                                Ribbon:          Home > Draw > Points drop-down > Multiple Points  ...
 DRAWING INFINITE LINES                                  Drawing Construction LINE                                  Ribbo...
 WRITING A SINGLE LINE TEXT                                Command: TEXT                                Current text styl...
Upcoming SlideShare
Loading in …5
×

Autocad 2011 3 hluti.

682 views

Published on

Autocad 3 hluti.

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
682
On SlideShare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
12
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Autocad 2011 3 hluti.

  1. 1. Learning Objectives • Arcs and its various options. • Rectangles, ellipses, and elliptical arcs.3. Starting with the Advanced • Polygons such as hexagons and pentagons. • Polylines and donuts. • Point style and point size. • Infinite lines. • Simple text Sketching
  2. 2.  DRAWING ARCS Ribbon: Home > Draw Arc drop-down Toolbar: Draw > Arc3. Starting with the Advanced Menu Bar: Draw > Arc Command: ARC or A Sketching The tools in the Arc drop-down
  3. 3. The 3-Point Option The Start, Center, End Option The Start, Center, Angle Option3. Starting with the Advanced The Start, Center, Length Option The Start, End, Angle Option The Start, End, Direction Option The Start, End, Radius Option The Center, Start, End Option Sketching The Center, Start, Angle Option The Center, Start, Length Option Continue Option Continue (LineCont:) Option
  4. 4.  DRAWING RECTANGLES Ribbon: Home > Draw > Rectangle Toolbar: Draw > Rectangle3. Starting with the Advanced Tool Palettes: Draw > Rectangle Command: RECTANG Sketching Invoking the RECTANGLE command from the Ribbon
  5. 5. Drawing Rectangles by Specifying Two Opposite Corners Drawing Rectangles by Specifying the Area and One Side3. Starting with the Advanced Drawing Rectangles by Specifying their Dimensions Drawing Rectangle at an Angle Chamfer Fillet Width Sketching Thickness Elevation
  6. 6.  DRAWING ELLIPSES Ribbon: Home > Draw >Ellipse drop-down Toolbar: Draw >Ellipse3. Starting with the Advanced Tool Palettes: Draw > Ellipse Command: ELLIPSE Sketching Tools in the ELLIPSE drop-down in the Draw panel
  7. 7. Drawing an Ellipse Using the Axis and Endpoint Option3. Starting with the Advanced Drawing an ellipse using the Axis and Endpoint option Sketching
  8. 8. Drawing Ellipse Using the Center Option3. Starting with the Advanced Drawing an ellipse using the Center option Sketching
  9. 9. Drawing Elliptical Arcs Ribbon: Home > Draw > Ellipse drop-down > Elliptical Arc Toolbar: Draw > Ellipse Arc3. Starting with the Advanced Tool Palettes: Draw > Ellipse Arc Command: ELLIPSE > Arc Sketching Drawing elliptical arcs
  10. 10.  DRAWING REGULAR POLYGONS Ribbon: Home > Draw > Polygon Toolbar: Draw > Polygon3. Starting with the Advanced Tool Palettes: Draw > Polygon Command: POLYGON Sketching
  11. 11. Drawing a Polygon by Specifying the Center of Polygon3. Starting with the Advanced Sketching Drawing an inscribed polygon using Drawing a circumscribed polygon the Center of Polygon option using the Center of Polygon option
  12. 12. Drawing a Polygon by Specifying an Edge3. Starting with the Advanced Drawing a polygon (hexagon) Sketching using the Edge option
  13. 13.  DRAWING POLYLINES Ribbon: Home > Draw > Polyline Toolbar: Draw > Polyline3. Starting with the Advanced Tool Palettes: Draw > Polyline Command: PLINE or PL Sketching Choosing the Polyline tool from the Draw panel
  14. 14. Next Point of Line Halfwidth Width Line3. Starting with the Advanced Length Radius Undo Second pt Close Undo Arc Width Angle Endpoint of Arc Center Close Sketching Direction
  15. 15.  DRAWING DONUTS Ribbon: Home > Draw > Donut Command: DONUT3. Starting with the Advanced Sketching
  16. 16. Example 13. Starting with the Advanced Unfilled donut Filled donut Solid-filled donut Sketching
  17. 17.  PLACING POINTS Changing the Point Style and Size3. Starting with the Advanced Ribbon: Utilities > Point Style Command: DDPTYPE Sketching The Point Style dialog box Different point styles for PDMODE values
  18. 18. Placing Multiple Points Ribbon: Home > Draw > Points drop-down > Multiple Points Toolbar: Draw > Point3. Starting with the Advanced Tool Palettes: Draw > Point Command: POINT Placing Points at Equal Distance Ribbon: Home > Draw > Points drop-down > Divide Sketching Placing Points at Specified Intervals Ribbon: Home > Draw > Points drop-down > Measure Options in the Points drop-down
  19. 19.  DRAWING INFINITE LINES Drawing Construction LINE Ribbon: Home > Draw > Construction Line3. Starting with the Advanced Toolbar: Draw > Construction Line Tool Palettes: Draw > Construction Line Command: XLINE Point Angular Horizontal Bisect Vertical Offset Sketching Drawing RAY Ribbon: Home > Draw > Ray Command: RAY
  20. 20.  WRITING A SINGLE LINE TEXT Command: TEXT Current text style: "Standard" Text height: 0.2000 Annotative: No3. Starting with the Advanced Specify start point of text or [Justify/Style]: Specify the starting point of the text. Specify height<current>: Enter the text height. Specify rotation angle of text <0>: Sketching

×