Submit Search
Upload
Improving the properties of Ni-Based Alloys by Co Addition
•
0 likes
•
3 views
IRJET Journal
Follow
https://www.irjet.net/archives/V9/i5/IRJET-V9I5297.pdf
Read less
Read more
Engineering
Report
Share
Report
Share
1 of 6
Download Now
Download to read offline
Recommended
Sustainability of Aluminum-based alloys in Chloride Ions Containing Environment
Sustainability of Aluminum-based alloys in Chloride Ions Containing Environment
IRJET Journal
Changes in Structural Features of Al-12Si-3Cu Alloy Due to Age Hardening
Changes in Structural Features of Al-12Si-3Cu Alloy Due to Age Hardening
IRJET Journal
IRJET- Study on Process Parameters of Diffusion Bonding of Titanium with ...
IRJET- Study on Process Parameters of Diffusion Bonding of Titanium with ...
IRJET Journal
Synthesis, characterization and mechanical behavior of nickel coated graphite...
Synthesis, characterization and mechanical behavior of nickel coated graphite...
eSAT Journals
Synthesis, characterization and mechanical behavior
Synthesis, characterization and mechanical behavior
eSAT Publishing House
International Journal of Engineering Research and Development
International Journal of Engineering Research and Development
IJERD Editor
Electrospun Nanofibers Reinforced Aluminium Matrix Composites, A Trial to Imp...
Electrospun Nanofibers Reinforced Aluminium Matrix Composites, A Trial to Imp...
IJAMSE Journal
Synthesis Characterization and Properties of Silica-Nickel Nanocomposites thr...
Synthesis Characterization and Properties of Silica-Nickel Nanocomposites thr...
IJERA Editor
More Related Content
Similar to Improving the properties of Ni-Based Alloys by Co Addition
Preparation and Investigation on Properties of Cryogenically Solidified Nano ...
Preparation and Investigation on Properties of Cryogenically Solidified Nano ...
IJERA Editor
2. 2009 oxid 20 cr pm 800 900c 100hr
2. 2009 oxid 20 cr pm 800 900c 100hr
LamiaaZaky1
Forming characterization and evaluation of hardness of nano carbon cast iron
Forming characterization and evaluation of hardness of nano carbon cast iron
Padmanabhan Krishnan
J0436469
J0436469
IOSR Journals
STRUCTURE PROPERTY CORRELATION OF MODIFIED Al-Mg ALLOYS FOR AEROSPACE APPLICA...
STRUCTURE PROPERTY CORRELATION OF MODIFIED Al-Mg ALLOYS FOR AEROSPACE APPLICA...
sivanagaraju chittelu
IRJET- Investigation on Electrochemical Machining of Inconel 718 Alloy
IRJET- Investigation on Electrochemical Machining of Inconel 718 Alloy
IRJET Journal
E012423034
E012423034
IOSR Journals
Analyzing the Effect of Alloying Addition in Steel samples
Analyzing the Effect of Alloying Addition in Steel samples
IRJET Journal
Effect of Sintering Temperature on Mechanical Properties of Aluminum Composites
Effect of Sintering Temperature on Mechanical Properties of Aluminum Composites
ijtsrd
Novel applications of nano and multiscale composites through case studies
Novel applications of nano and multiscale composites through case studies
Padmanabhan Krishnan
IRJET- Carburizing of Plane Carbon Steels by Electrolyte Plasma
IRJET- Carburizing of Plane Carbon Steels by Electrolyte Plasma
IRJET Journal
Potential enhancement of thermoelectric energy conversion in cobaltite superl...
Potential enhancement of thermoelectric energy conversion in cobaltite superl...
Anastasios Englezos
Comparative Study on the High-Stress Abrasive Wear Behaviour of Zinc and Copp...
Comparative Study on the High-Stress Abrasive Wear Behaviour of Zinc and Copp...
IRJET Journal
Oguzie1332016IRJPAC30296_1
Oguzie1332016IRJPAC30296_1
Ikenna Onyeachu
M1303047377
M1303047377
IOSR Journals
Ceramic Nanomaterials for High Temperature Applications -Crimson Publishers
Ceramic Nanomaterials for High Temperature Applications -Crimson Publishers
CrimsonPublishersRDMS
Study on Processing and Mechanical Properties of nano SiCp reinforced AA7075
Study on Processing and Mechanical Properties of nano SiCp reinforced AA7075
theijes
Md iw mtu3odi=
Md iw mtu3odi=
International Journal of Science and Research (IJSR)
Fundamentals, synthesis and applications of Al2O3-ZrO2 composites
Fundamentals, synthesis and applications of Al2O3-ZrO2 composites
TANDRA MOHANTA
Investigation the Stability of the Copper Oxide- Ethylene Glycol Nanofluids.
Investigation the Stability of the Copper Oxide- Ethylene Glycol Nanofluids.
IRJET Journal
Similar to Improving the properties of Ni-Based Alloys by Co Addition
(20)
Preparation and Investigation on Properties of Cryogenically Solidified Nano ...
Preparation and Investigation on Properties of Cryogenically Solidified Nano ...
2. 2009 oxid 20 cr pm 800 900c 100hr
2. 2009 oxid 20 cr pm 800 900c 100hr
Forming characterization and evaluation of hardness of nano carbon cast iron
Forming characterization and evaluation of hardness of nano carbon cast iron
J0436469
J0436469
STRUCTURE PROPERTY CORRELATION OF MODIFIED Al-Mg ALLOYS FOR AEROSPACE APPLICA...
STRUCTURE PROPERTY CORRELATION OF MODIFIED Al-Mg ALLOYS FOR AEROSPACE APPLICA...
IRJET- Investigation on Electrochemical Machining of Inconel 718 Alloy
IRJET- Investigation on Electrochemical Machining of Inconel 718 Alloy
E012423034
E012423034
Analyzing the Effect of Alloying Addition in Steel samples
Analyzing the Effect of Alloying Addition in Steel samples
Effect of Sintering Temperature on Mechanical Properties of Aluminum Composites
Effect of Sintering Temperature on Mechanical Properties of Aluminum Composites
Novel applications of nano and multiscale composites through case studies
Novel applications of nano and multiscale composites through case studies
IRJET- Carburizing of Plane Carbon Steels by Electrolyte Plasma
IRJET- Carburizing of Plane Carbon Steels by Electrolyte Plasma
Potential enhancement of thermoelectric energy conversion in cobaltite superl...
Potential enhancement of thermoelectric energy conversion in cobaltite superl...
Comparative Study on the High-Stress Abrasive Wear Behaviour of Zinc and Copp...
Comparative Study on the High-Stress Abrasive Wear Behaviour of Zinc and Copp...
Oguzie1332016IRJPAC30296_1
Oguzie1332016IRJPAC30296_1
M1303047377
M1303047377
Ceramic Nanomaterials for High Temperature Applications -Crimson Publishers
Ceramic Nanomaterials for High Temperature Applications -Crimson Publishers
Study on Processing and Mechanical Properties of nano SiCp reinforced AA7075
Study on Processing and Mechanical Properties of nano SiCp reinforced AA7075
Md iw mtu3odi=
Md iw mtu3odi=
Fundamentals, synthesis and applications of Al2O3-ZrO2 composites
Fundamentals, synthesis and applications of Al2O3-ZrO2 composites
Investigation the Stability of the Copper Oxide- Ethylene Glycol Nanofluids.
Investigation the Stability of the Copper Oxide- Ethylene Glycol Nanofluids.
More from IRJET Journal
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
IRJET Journal
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTURE
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTURE
IRJET Journal
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...
IRJET Journal
Effect of Camber and Angles of Attack on Airfoil Characteristics
Effect of Camber and Angles of Attack on Airfoil Characteristics
IRJET Journal
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...
IRJET Journal
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...
IRJET Journal
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...
IRJET Journal
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...
IRJET Journal
A REVIEW ON MACHINE LEARNING IN ADAS
A REVIEW ON MACHINE LEARNING IN ADAS
IRJET Journal
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...
IRJET Journal
P.E.B. Framed Structure Design and Analysis Using STAAD Pro
P.E.B. Framed Structure Design and Analysis Using STAAD Pro
IRJET Journal
A Review on Innovative Fiber Integration for Enhanced Reinforcement of Concre...
A Review on Innovative Fiber Integration for Enhanced Reinforcement of Concre...
IRJET Journal
Survey Paper on Cloud-Based Secured Healthcare System
Survey Paper on Cloud-Based Secured Healthcare System
IRJET Journal
Review on studies and research on widening of existing concrete bridges
Review on studies and research on widening of existing concrete bridges
IRJET Journal
React based fullstack edtech web application
React based fullstack edtech web application
IRJET Journal
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...
IRJET Journal
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.
IRJET Journal
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...
IRJET Journal
Multistoried and Multi Bay Steel Building Frame by using Seismic Design
Multistoried and Multi Bay Steel Building Frame by using Seismic Design
IRJET Journal
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...
IRJET Journal
More from IRJET Journal
(20)
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTURE
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTURE
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...
Effect of Camber and Angles of Attack on Airfoil Characteristics
Effect of Camber and Angles of Attack on Airfoil Characteristics
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...
A REVIEW ON MACHINE LEARNING IN ADAS
A REVIEW ON MACHINE LEARNING IN ADAS
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...
P.E.B. Framed Structure Design and Analysis Using STAAD Pro
P.E.B. Framed Structure Design and Analysis Using STAAD Pro
A Review on Innovative Fiber Integration for Enhanced Reinforcement of Concre...
A Review on Innovative Fiber Integration for Enhanced Reinforcement of Concre...
Survey Paper on Cloud-Based Secured Healthcare System
Survey Paper on Cloud-Based Secured Healthcare System
Review on studies and research on widening of existing concrete bridges
Review on studies and research on widening of existing concrete bridges
React based fullstack edtech web application
React based fullstack edtech web application
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...
Multistoried and Multi Bay Steel Building Frame by using Seismic Design
Multistoried and Multi Bay Steel Building Frame by using Seismic Design
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...
Recently uploaded
Gravity concentration_MI20612MI_________
Gravity concentration_MI20612MI_________
Romil Mishra
Introduction to Artificial Intelligence: Intelligent Agents, State Space Sear...
Introduction to Artificial Intelligence: Intelligent Agents, State Space Sear...
shreenathji26
Introduction of Object Oriented Programming Language using Java. .pptx
Introduction of Object Oriented Programming Language using Java. .pptx
Poonam60376
Cost estimation approach: FP to COCOMO scenario based question
Cost estimation approach: FP to COCOMO scenario based question
Sneha Padhiar
Structural Integrity Assessment Standards in Nigeria by Engr Nimot Muili
Structural Integrity Assessment Standards in Nigeria by Engr Nimot Muili
Nimot Muili
ASME-B31.4-2019-estandar para diseño de ductos
ASME-B31.4-2019-estandar para diseño de ductos
JORGE RODRIGUEZ Jrodriguezj2006
Livre Implementing_Six_Sigma_and_Lean_A_prac([Ron_Basu]_).pdf
Livre Implementing_Six_Sigma_and_Lean_A_prac([Ron_Basu]_).pdf
saad175691
ADM100 Running Book for sap basis domain study
ADM100 Running Book for sap basis domain study
dhruvamdhruvil123
22CYT12 & Chemistry for Computer Systems_Unit-II-Corrosion & its Control Meth...
22CYT12 & Chemistry for Computer Systems_Unit-II-Corrosion & its Control Meth...
KrishnaveniKrishnara1
TEST CASE GENERATION GENERATION BLOCK BOX APPROACH
TEST CASE GENERATION GENERATION BLOCK BOX APPROACH
Sneha Padhiar
10 AsymmetricKey Cryptography students.pptx
10 AsymmetricKey Cryptography students.pptx
AdityaGoogle
Introduction to Machine Learning Part1.pptx
Introduction to Machine Learning Part1.pptx
Pavan Mohan Neelamraju
Stork Webinar | APM Transformational planning, Tool Selection & Performance T...
Stork Webinar | APM Transformational planning, Tool Selection & Performance T...
Stork
FUNCTIONAL AND NON FUNCTIONAL REQUIREMENT
FUNCTIONAL AND NON FUNCTIONAL REQUIREMENT
Sneha Padhiar
Submerged Combustion, Explosion Flame Combustion, Pulsating Combustion, and E...
Submerged Combustion, Explosion Flame Combustion, Pulsating Combustion, and E...
Ayisha586983
Artificial Intelligence in Power System overview
Artificial Intelligence in Power System overview
sandhya757531
1- Practice occupational health and safety procedures.pptx
1- Practice occupational health and safety procedures.pptx
Mel Paras
A brief look at visionOS - How to develop app on Apple's Vision Pro
A brief look at visionOS - How to develop app on Apple's Vision Pro
Ray Yuan Liu
input buffering in lexical analysis in CD
input buffering in lexical analysis in CD
HeadOfDepartmentComp1
Turn leadership mistakes into a better future.pptx
Turn leadership mistakes into a better future.pptx
Stephen Sitton
Recently uploaded
(20)
Gravity concentration_MI20612MI_________
Gravity concentration_MI20612MI_________
Introduction to Artificial Intelligence: Intelligent Agents, State Space Sear...
Introduction to Artificial Intelligence: Intelligent Agents, State Space Sear...
Introduction of Object Oriented Programming Language using Java. .pptx
Introduction of Object Oriented Programming Language using Java. .pptx
Cost estimation approach: FP to COCOMO scenario based question
Cost estimation approach: FP to COCOMO scenario based question
Structural Integrity Assessment Standards in Nigeria by Engr Nimot Muili
Structural Integrity Assessment Standards in Nigeria by Engr Nimot Muili
ASME-B31.4-2019-estandar para diseño de ductos
ASME-B31.4-2019-estandar para diseño de ductos
Livre Implementing_Six_Sigma_and_Lean_A_prac([Ron_Basu]_).pdf
Livre Implementing_Six_Sigma_and_Lean_A_prac([Ron_Basu]_).pdf
ADM100 Running Book for sap basis domain study
ADM100 Running Book for sap basis domain study
22CYT12 & Chemistry for Computer Systems_Unit-II-Corrosion & its Control Meth...
22CYT12 & Chemistry for Computer Systems_Unit-II-Corrosion & its Control Meth...
TEST CASE GENERATION GENERATION BLOCK BOX APPROACH
TEST CASE GENERATION GENERATION BLOCK BOX APPROACH
10 AsymmetricKey Cryptography students.pptx
10 AsymmetricKey Cryptography students.pptx
Introduction to Machine Learning Part1.pptx
Introduction to Machine Learning Part1.pptx
Stork Webinar | APM Transformational planning, Tool Selection & Performance T...
Stork Webinar | APM Transformational planning, Tool Selection & Performance T...
FUNCTIONAL AND NON FUNCTIONAL REQUIREMENT
FUNCTIONAL AND NON FUNCTIONAL REQUIREMENT
Submerged Combustion, Explosion Flame Combustion, Pulsating Combustion, and E...
Submerged Combustion, Explosion Flame Combustion, Pulsating Combustion, and E...
Artificial Intelligence in Power System overview
Artificial Intelligence in Power System overview
1- Practice occupational health and safety procedures.pptx
1- Practice occupational health and safety procedures.pptx
A brief look at visionOS - How to develop app on Apple's Vision Pro
A brief look at visionOS - How to develop app on Apple's Vision Pro
input buffering in lexical analysis in CD
input buffering in lexical analysis in CD
Turn leadership mistakes into a better future.pptx
Turn leadership mistakes into a better future.pptx
Improving the properties of Ni-Based Alloys by Co Addition
1.
International Research Journal
of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 09 Issue: 05 | May 2022 www.irjet.net p-ISSN: 2395-0072 © 2022, IRJET | Impact Factor value: 7.529 | ISO 9001:2008 Certified Journal | Page 1240 Improving the properties of Ni-Based Alloys by Co Addition Auqib Mushtaq1, Abhishek Thakur2 1M.Tech Scholar, Universal Institute of Engineering & Technology, Lalru 2Assitant Professor, Universal Institute of Engineering & Technology, Lalru ----------------------------------------------------------------------------***-------------------------------------------------------------------------- Abstract: Grain refinement is caused by the addition of Co, which is why changing the amount of Co may be regarded to have an effect on both the microstructure and the behavior of corrosion. The behavior of the grain during corrosion is directly influenced by grain refining. After combining the powders of nickel, chromium, aluminum, and cobalt in the appropriate proportions, the alloys were then compacted to produce green pellets as the next step in the synthesis process. In the last step, the samples were created by using a technology called vacuum arc melting and casting. Both x-ray diffraction and optical microscopy were used in order to characterize the samples after they had been produced. The Vickers hardness tester was used to provide an assessment of the surface's toughness. It has been discovered that the characteristics of the alloy have been greatly improved. Keyword: Ni Based Alloys, Corrosion properties, Vacuum arc melting 1. Introduction: According to the results, the coating's corrosion resistance was improved over the substrate when compared to that of the substrate itself, while its hardness and wear resistance both improved as the amount of Ti and B4C contained inside it grew. Plasma cladding is the method of fabricating products that sees the most widespread use in industry due to its exceptional benefits. These benefits include excellent arc stability, high energy exchange efficiency (due to its relatively high energy density), low thermal distortion (due to its low cost of equipment), good matrix bonding (due to its thick coating), and low thermal distortion. Plasma cladding is the method of fabricating products that sees the most widespread use in industry due to its exceptional benefits. The choice of alloying components has been shown to have a significant impact on the microstructure of alloys as well as the resistance of alloys to corrosion [1]. Wen et al. [2] studied how the presence of different microstructures affected the corrosion resistance of Ni-Al intermetallic compounds that were synthesized by vacuum melting. According to the findings, a significant number of grain boundaries were found, and the presence of a multiphase structure led to the formation of a significant number of corrosive galvanic cells, which in turn led to severe corrosion. Both of these phenomena were caused by the presence of severe corrosion. Ye et al. [3] were able to create a crack-free CrMnFeCoNi high- entropy alloy coating by using an approach that involved laser surface alloying. This coating resulted in the formation of a single face-centered cubic (FCC) phase and had a level of corrosion resistance that was comparable to that of stainless steel 304. Ni has the potential to produce stable compounds as a solid solution element in a solid solution system if it is combined with numerous alloying elements and is a component of strengthening phases. [4–6] One of the reasons why chromium is so often used to improve a material's resistance to corrosion is because it has the potential to generate a dense oxide covering. However, very little study has been done on the effect that optimizing the materials used has on the composition and phase evolution of the plasma cladding at different stages of the process. Ni is a transition metal with a molar mass of 58.69 g mol and a density of 8.90 g cm-3 when heated to 25 degrees Celsius. In the solid form, it exhibits a face-centered cubic (fcc) crystal structure, which is a kind of cubic. It melts at 1453 degrees Celsius and is resistant to corrosion and oxidation at temperatures ranging from mild to high. A value as low as 68.44 nm at 20 degrees Celsius indicates that the electrical resistivity of Ni is minimal when the temperature is kept low. When exposed to an oxidising environment, it is chemically inactive, and its corrosion resistance falls. Ni is a very adaptable metal that can easily combine with the majority of other metals to make alloys. Cobalt is located between the elements iron and nickel on the periodic table. Co has a molar mass of 58.93 g mol-1 and a density of 8.85 g cm-3, which are both comparable to Ni's molar mass and density. Cobalt is a ferromagnetic metal, similar to Ni in that it has a magnetic field. Co may exist in two distinct crystalline forms depending on the temperature; hexagonal closed packed at 417 °C and fourfold closed packed at 417 °C and 1493 °C, respectively (melting point) [(hcp; ε-Co) at T < 417 °C, and fcc; (α-Co)]. The combination of Co and Ni leads in a reduction in corrosion and wear rates [7]. Because of their superior qualities when compared to pure Ni or Co, nickel and cobalt-based alloys have been investigated as potential technical coatings. High strength, improved wear and corrosion resistance,
2.
International Research Journal
of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 09 Issue: 05 | May 2022 www.irjet.net p-ISSN: 2395-0072 © 2022, IRJET | Impact Factor value: 7.529 | ISO 9001:2008 Certified Journal | Page 1241 appropriate electro catalytic activity, and specific magnetic properties are all characteristics of these materials [8]. According to [9], an important feature of the Ni-Co alloy system is that these two elements can form solid solutions (cobalt-cobalt-nickel, nickel-cobalt-nickel) over a wide range of concentrations, allowing alloys with any chemical composition to be produced in principle [9]. 2. Materials and Methods: 2.1. Materials For the present work Ni, Cr, Al, and Co powders with purity higher than 99.9 % were used as raw materials. As received powders of composition were synthesized by melting route in vacuum arc furnace. 2.2. Synthesis of Alloys The starting material were in the form of powder of Ni, Cr, Al, and Co elements with the purity higher than 99 at.%. The elements were weighed to obtain samples with compositions Ni-5Cr-5Al-xCo (x=0, 5, 10, 20, and 30) as described in Table 2. Table 2 Composition of alloys SAMPLE Ni (wt. %) Cr (at. %) Al (wt. %) Co (wt. %) Ni-5Cr-5Al 90 5 5 0 Ni-5Cr-5Al-5Co 85 5 5 5 Ni-5Cr-5Al-10Co 80 5 5 10 Ni-5Cr-5Al-20Co 70 5 5 20 Ni-5Cr-5Al-30Co 60 5 5 30 Pellets of 15 mm diameter and 10 mm height were generated by uniaxial compaction of blended powder in 15 mm tungsten carbide die set. Metals in the form of powder or microscopic lumps are melted together to produce alloys in the Arc Melting process. When a nonconsumable tungsten electrode creates an electric arc, the gas is heated and plasma forms, releasing a tremendous amount of heat energy and melting the sample placed in a crucible within the copper hearth. The high temperature is accomplished by converting the energy of fast-moving electrons striking the sample to heat energy, which increases the temperature within the furnace to about 2000 degrees Celsius, forcing the sample to melt and melt the sample. 3. Results and Discussion 3.1. Thermal Analysis The sample was characterised using DSC to determine the melting point and phase change that occurred during the heating process of the sample. Despite the fact that the DSC was used to determine the melting point of the Ni-5Cr-5Al alloy, the Elements Atomic weight (u) Atomic radius (Å) Structure Co 58.933 1.251 HCP Cr 51.996 1.249 BCC Al 27 1.840 FCC Ni 58.693 1.246 FCC Table 1. Properties of Co, Cr, Fe, Ni and Ti powder used to form high entropy alloy
3.
International Research Journal
of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 09 Issue: 05 | May 2022 www.irjet.net p-ISSN: 2395-0072 © 2022, IRJET | Impact Factor value: 7.529 | ISO 9001:2008 Certified Journal | Page 1242 sample did not melt even when heated to 1550 degrees Celsius (the instrument's maximum temperature), indicating that the melting point of the alloy powder would be greater than 1550 degrees Celsius. The melting point of Ni-5Cr-5Al, as a result, could not be determined using DSC analysis. In addition, two exothermic peaks can be seen in the DSC. The first wide exothermic peak relates to the rise of crystallite size caused by lattice diffusion, while the second small exothermic peak corresponds to the nucleation and formation of a new phase 3.2 Density The density of Ni-5Cr-5Al-xCo (x=0, 5, 10, 20, and 30) alloys was determined using Archimedes’ principle, which is shown in Figure 1. The actual density of all the alloys is slightly less than that of the theoretical density due to some porosity which reduces the density. The density did not show any significant effect by changing the Co content because of almost same density of Ni and Co. Figure 1 Density of Ni-5Cr-5Al-xCo (x=0, 5, 10, 20, and 30) alloys 3.3 Hardness In this study, the Vickers hardness tester was used to determine the hardness of Ni-5Cr-5Al-xCo (x=0, 5, 10, 20, and 30) alloys (Figure 2). The hardness of the material rose as the quantity of Co was increased, owing to the fact that the addition of Co resulted in a reduction in the grain size. Because of the smaller particle size, there is more grain boundary area, which results in greater grain boundary density. Increased hardness is accomplished by increasing the Co content and decreasing the dislocation movement as a result of this restriction on dislocation movement.
4.
International Research Journal
of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 09 Issue: 05 | May 2022 www.irjet.net p-ISSN: 2395-0072 © 2022, IRJET | Impact Factor value: 7.529 | ISO 9001:2008 Certified Journal | Page 1243 Figure 2 Hardness of Ni-5Cr-5Al-xCo (x=0, 5, 10, 20, and 30) alloys 3.4 Phase analysis and crystallite size The XRD pattern of Ni-5Cr-5Al-xCo (x=0, 5, 10, 20, and 30) alloys is shown in Figure 3. The XRD of all the samples' peaks revealed a single FCC phase. With the addition and growth of Co content, the noticeable peak widened. The conspicuous peaks of the XRD peaks expand significantly after 30 percent Co addition. This widening denotes a decrease in grain size, which will be examined in the following section. By increasing the Co content, the XRD patterns reveal that the peak shifts to the left (toward the lower diffraction angle), indicating that the lattice expands during milling. In all of the samples, the alloying elements Co, Cr, and Al formed a solid solution with the base material Ni, forming a single FCC phase with peaks (111), (200), (220), (311), and (312). (222). Figure 3. XRD patterns of Ni-5Cr-5Al-xCo (x=0, 5, 10, 20, and 30) alloys 3.5. Optical micrographs Figure 4 depicts the optical microstructures of Ni-5Cr-5Al-xCo (x=0, 5, 10, 20, and 30) alloys. In all of the alloys, the precipitates may be found near the grain boundaries. These precipitates are undetectable in XRD because their concentration
5.
International Research Journal
of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 09 Issue: 05 | May 2022 www.irjet.net p-ISSN: 2395-0072 © 2022, IRJET | Impact Factor value: 7.529 | ISO 9001:2008 Certified Journal | Page 1244 is minimal or their crystal structure is identical to that of the basic materials. Image was used to calculate the average grain size. Ni-10Cr-10Al-5Co had an average grain size of 34 m. The grain size was lowered to 25 m when Co was increased to 10%. With the addition of Co to 20 and 30 percent, the grain size was further decreased to 18 and 11 m, respectively. The decrease in grain size is in line with the XRD data, which show a broadening of the peak with the addition and rise of Co content, as discussed in the preceding section. Figure 4 Optical micrograph of microcrystalline a) Ni-5Cr-5Al-5Co, b) Ni-5Cr-5Al-10Co, c) Ni-5Cr-5Al-20Co, and d) Ni-5Cr-5Al- 30Co alloys 4. Conclusion: The present research work was undertaken with the aim of developing the bulk Ni-5Cr-5Al-xCo (x=0, 5, 10, 20, 30) alloys by vacuum- arc melting furnace and study the effect of Co on the electrochemical corrosion behavior of Ni-based alloys. Ni-5Cr- 5Al-xCo (x=0, 5, 10, 20, 30) alloys were successfully synthesized using a vacuum arc melting furnace. The grain size of Ni-5Cr- 5Al-xCo (x=0, 5, 10, 20, 30) alloys were determined from micrographs using ImageJ software. The grain size continuously decreased with the increase of Co content. Co, Cr, Al formed solid solution with Ni which was confirmed by XRD results. The melting point of Ni-5Cr-5Al-xCo (x=5, 10, 20, 30) alloys could not be determined by DSC and might be above 1550 °C. The density was determined using Archemedes principle and the actual density was found slightly lesser than the actual density due to presence of some porosity.The hardness of Co-containing alloys was more than Co-free alloys and continuously increased with the increase of Co content. Conflict of Interest : Authors declare no conflict of Interest. (a) (b) (c) (d)
6.
International Research Journal
of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 09 Issue: 05 | May 2022 www.irjet.net p-ISSN: 2395-0072 © 2022, IRJET | Impact Factor value: 7.529 | ISO 9001:2008 Certified Journal | Page 1245 References: [1] G. Jin, Y. Li, H. Cui, X. Cui, and Z. Cai: J. Mater. Eng. Perform., 2016, vol. 25, pp. 2412–19. [2] J. Wen, H. Cui, N. Wei, X. Song, G. Zhang, C. Wang, and Q. Song: J. Alloys Compd., 2017, vol. 695, pp. 2424–33. [3] Q. Ye, K. Feng, Z. Li, F. Lu, R. Li, J. Huang, and Y. Wu: Appl. Surf. Sci., 2017, vol. 396, pp. 1420–26. [4] H. Sun, M. Guo, F. Meng, and A. Liu: Trans. Indian Inst. Met., 2015, vol. 69, pp. 1369–76. [5] Y. Lu, G. Lu, F. Liu, Z. Chen, and K. Tang: J. Alloys Compd., 2015, vol. 637, pp. 149–54. [6] K. Liu, Y. Li, and J. Wang: Mater. Des., 2016, vol. 105, pp. 171–78. [7] J.R. Davis, Nickel, cobalt, and their alloys, ASM International, 2000. [8] C. Gu, J. Lian, Z. Jiang, Advanced Engineering Materials, 8 (2006) 252-256. [9] J. Vazquez-Arenas, L. Altamirano-Garcia, T. Treeratanaphitak, M. Pritzker, R. Luna-Sánchez, R. Cabrera-Sierra, Electrochimica Acta, 65 (2012) 234-243
Download Now