Description The INNODRIVE 550 and 600 configuration is one of the largest capacity and operationally proven powered reel system available to the Offshore Oil & Gas and Renewable Industry. Used for single or multiple installations of flexible flowlines, umbilicals, mooring wires and power cables ensuring a safe, fast and economical installation. The INNODRIVE system is capable of handling product installation operations with or without laying tensioner and from a multitude of offshore dynamically positioned or anchored vessel in shallow and ultra deep water depths. Capabilities • INNODRIVE 550; 550Te capacity and reel size up to 12mtr O.D. • INNODRIVE 600; 600Te capacity and reel size up to 14mtr O.D. • Product Ø capacity 20mm to 300mm. • Offshore product installation up to sea state 4 • Customised layINNODRIVE – Powered Reel Drive System configuration to customers’ requirements • DNV, LR and RINA certified • Containerised shipping and fast email@example.com ITALY – SLOVENIJA – UK - UAE
INNODRIVE – Powered Reel Drive System Revision 1SYSTEM DETAILS:INNODRIVE can be easily client customised with any required auxiliary equipment to suit, such as: Lay Tensioner, Level winder,Control Room, Load Cell System. The flexible design characteristics of INNODRIVE system allow the units to operate from avariety of vessel types and sizes so improving operational flexibility and multiple-reel installation capability all in a safe, fast andeconomical manner.INNODRIVE is operated by an automatic system and it is DNV, LR and RINA certified. Both the systems can be used for eitherproduct laying or retrieval and is operated from its control system monitored constantly by a programmable logic controller (PLC)that guarantees reliability and excellent system performance. There are two operating modes: Master or Slave. When operatingin “Master” mode the system manages the product pulling load by a closed loop utilising a load cell. When operated in “Slave”mode the system feeds a laying tensioner ensuring the product remains ‘slack’ between the reel and the tensioner.INNODRIVE is a robust design manufactured from S355 grade carbon steel with sufficient structural resistance to operate to -20°C. Designed to distribute evenly the weight and loads onto the vessel deck.The whole INNODRIVE system was designed to be easily transportable by sea or road in standard open-topped containers toanywhere in the world and even the highest drive towers, which are 9.0 m high, can be assembled or dismantled in one workingday. This key feature avoids the need of having to bring a vessel to collect the systems and reduce significantly any mobilizationor demobilization time.DIMENSIONS AND WEIGHT: DESCRIPTION INNODRIVE-550 INNODRIVE-600 Product capacity 550 mT 600 mT Max reel diameter 12 m OD 14 m OD Weight 90 mT 100 mT Length 4.5m 4.8m Breadth 4.0m 4.2m Height 8.5m 9.0m Product diameter 20mm - 300mm 20mm - 300mm Max pull on hub 140mT 160mT Max operational sea state Sea state 4 Sea state 4 Max transit sea state (with appropriate Sea state 7 Sea state 8 seafastening) Laying speed Up to 1600 m/h Up to 1800 m/h Speed control Full variable control Full variable control NOTE: Both are able to operate to -20°C INNOVO Specifications and weights provided are for guidance only.
Description INNOREEL has 500mT product loading and it is designed to be loaded with variety of products ranging from subsea umbilicals, flexible pipes, mooring wires and power cables. These can then be installed from INNOREEL itself utilising the INNOVO’s Powered Drive Systems from various installation vessels or barges. INNOREEL can be designed in different dimensions and weights in order to suit client requirements, up to maximum original design parameters. INNOREEL is supplied with its own dedicated saddle suitable for any short to long term product storage requirement prior to deployment operations.INNOREEL – 500mT Reel Capabilities • Product Ø capacity 20mm to 300mm • Product loading capacity up to 500mT • Reel OD range up to 14mtr • Auxiliary Equipment o Lifting spreader bar o Saddlewww.firstname.lastname@example.org ITALY – SLOVENIJA – UK - UAE
INNOREEL – 500mT Reel Revision 1SYSTEM DETAILS:INNOREEL has a product capacity of up to 500mT and for mobilization/demobilization the Reel’s dedicated Lifting SpreaderBar is supplied to lift the complete system with product up to product and unit weight of 550mT. The reel assembly consists ofan inner hub unit that interfaces to the power drive unit for the deployment of the power cable reel. This manufacture is ableto operate to -20°C.Adaptability, INNOREEL is perfectly suitable for any short or long term product storage requirement prior to installationoperations, which can be later performed directly from this reel itself once it is mounted to one of INNOVO’s Powered DriveSystems.Certification and testing shall be in accordance to DNV, LR and RINA certification. Along with INNOREEL, an operating systemwith a full turnkey package can be provided to include pipe handling equipment: tensioners, straighteners, clamps, aligners,rollers and monitoring equipment.DIMENSIONS AND WEIGHT: DESCRIPTION INNOREEL Product Capacity 500 Te Max reel diameter 14mtr Internal drum diameter 9mtr Reels width 7.5mtr Weight (empty) 74Te Hub interface Compatible with worldwide standard systems INNOVO Specifications and weights provided are for guidance only.
Description INNOVO’s Modular Jack-Up is a reliable alternative for operations in a diverse range of application ranging from dredging operations, pier building activities, ultra heavy- duty fendering, among others. It consists of an assembly of the modular components known as INNOFLOAT (floating units) and INNOLIFT (lifting modules), both certified by RINA’s marine classification (other certification are available on demand). This modular approach allows full customization for different Jack-up sizes and pontoon shapes to suit specific Client requirements and operations. Capabilities • Operating depth 1mtr to 30mtr water depth • Lifting capability configurations: - 1000mT overall lifting INNOVO’s Modular JACK-UP - 2000mT overall lifting • Jack-up ‘feet’ to suit seabed email@example.com ITALY – SLOVENIJA – UK - UAE
INNOVO’s Modular JACK-UP Revision 1SYSTEM DETAILS:INNOFLOAT is a boxed shaped floating element specifically designed to be assembled, once place on water, into larger systems ofvariable shapes and dimensions. Each INNOFLOAT is designed to be easily transportable to site, handled by low tonnage craneand assembled without any delay.INNOLFIT provides the lifting system for INNOVO’s Modular Jack-up, this is comprised by 4 off lifting modules (legs), where eachleg would have the lifting capacity of either 500mt/each or 250mt/each depending on the required configuration.Special Jack-up’s feet can be installed to suit a variety of seabed terrains (rocky, sandy, etc). A back-up system is also available toenable a foot to get disconnected from the Jack-up leg if leg movement becomes restricted by existing soil conditions.A patented manual/semi-automatic/automatic scenario based on input signal data that is constantly monitored by aprogrammable logic controller (PLC), guarantees reliability and significant lifting speeds.The modular Jack-up can be self propelled by adequate outboard motors or it can be tug assisted. Both Jack-up’s modularcomponents INNOFLOAT and INNOLIFT are certified by the Royal Institution of Naval Architects (RINA) and all other certificationsare available on demand.DIMENSIONS AND WEIGHT: DESCRIPTION 500mt Pay Load Jack-up 250mt Pay Load Jack-up Length overall (LDA) 30m 37m Breadth 17m 28m Height 2.89m 2.89m Leg extensions 36m 48m Leg diameter 1.95m 1.2m Payload 500mt 250mt INNOVO Specifications and weights provided are for guidance only.
Description INNOVO’S Modular pontoon INNOVO’s modular pontoons are box shaped floating elements which are specifically designed to be assembled, once placed in water, into larger units of extremely variable shape and dimension. Modular components are known as INNOFLOAT (floating units) and INNOLIFT (lifting modules), both certified by RINA’s marine classification (other certifications are available on demand). INNOVO’S Ultra Heavy Fenders INNOVO’S ultra heavy duty fenders are modular pontoon designed and built to face hash water and severe stormy conditions: design and manufacturing are fully certified by RINA. Capabilities INNOVO’S modular pontoon are: • Heavy duty; INNOVO’s Modular PONTOON • Resistant; • Verified to work in a jack-up configuration • Suitable to create barge configurations of extremely variable shape and dimensions according to the scope of firstname.lastname@example.org ITALY – SLOVENIJA – UK - UAE
INNOVO’S Modular PONTOON Revision 1 SYSTEM DETAILS: • Single elements are easily transportable so they can be transferred on site by trucks, placed in water and then assembled. • The pontoon can be self propelled by relevant outboard motors or can be moved using winches. • In INNOVO’s modular pontoon there are only continuous full penetration welds • Pontoons have a flat bottom and minimal draft, which makes them suitable for working in very shallow waters (under one metre depth). • The modular pontoon are design and build according the most demanding requirement of International Association Classification Society. • A patented manual/semi-automatic/automatic scenario based on input signal data that is constantly monitored by a programmable logic controller (PLC), guarantees reliability and significant lifting speeds. DIMENSIONS AND WEIGHT: INNOFLOAT module RINA class: C @ HULL (BV, DNV, GL, LR, ABS, RUSSIAN REGISTER class on demand) Link for 1,5 and 2 m height module L [m] B [m] T [m] W [t] Deck Capacity [t/mq] 3/18 3 3 2 3,7 6 6/36 6 3 2 7,2 6 9/54 9 3 2 10,5 6 12/72 12 3 2 13,5 6 INNOLIFT module RINA certificated (BV, DNV, GL, LR, ABS, RUSSIAN REGISTER certificated on demand) Link for 1,5 and 2 m height moduleINNOLIFT L [m] B [m] T [m] W [t] Lifting Force [t] Spud [in] Spud L/W [m/t]34-50 3 3 2 14,5 50 34” 6 / 3,234-65 3 3 2 15,0 65 34” 6 / 3,234-75 3 3 2 20,5 75 34” 6 / 3,234-100 3 3 2 20,5 100 34” 6 / 3,2 INNOVO Specifications and weights provided are for guidance only.
T20 HIGH-CUBE Description INNOVO’s High Cube are box shaped floating elements which are specifically designed to be assembled, into larger units of extremely variable shape and dimension. Modular components are certified by RINA’s marine classification (other certifications are available on demand). Features INNOVO’S modular High-Cube are: • Heavy duty; • Resistant; • Characterized by continuous full penetration welds. INNOVO’s HIGH-CUBEwww.email@example.com ITALY – SLOVENIJA – UK - UAE
INNOVO’S High-Cube Revision 1 SYSTEM DETAILS: • Single elements are easily transportable so they can be transferred on site by trucks. • The modules can be moved using slings correctly fixed on the high-cube top. • Each high-cube can be assembled with the all the other high-cube modules typologies by suitable connections. • The high-cube are design and build according the most demanding requirement of International Association Classification Society. DIMENSIONS AND WEIGHT: HIGH-CUBE MODULES RINA class: C @ HULL (BV, DNV, GL, LR, ABS, RUSSIAN REGISTER class on demand) T L Link for 1,5 and 2 m height module B L [m] B [m] T [m] W [t] Deck Capacity [t/mq]T20HC (iso container, 20 feet high cube) 6,06 2,44 2,89 9,8 8T40HC (iso container, 40 feet high cube) 12,19 2,44 2,89 16,3 8 LIFTING POINT HIGH-CUBE INTERNAL FRAME HIGH-CUBE CONNECTION SYSTEM INNOVO Specifications and weights provided are for guidance only.
Description The INNOTABLE 2000 is a 2000Te capacity umbilical and cable carousel system for the purpose of installing umbilicals, subsea power cables and telecoms cables in the Offshore Oil & Gas, Telecoms and Renewable Industry ensuring a safe, fast and economical installation. The INNOTABLE system is capable of handling product installation operations from a multitude of vessels including dynamically positioned or anchored units in harsh environments and both shallow and ultra deep water depths. The system is a high volume and high capacity to suit larger cable diameters, long lengths and high weights. Capabilities • INNOTABLE 2000; 2000Te capacity and max 15mtr O.D • Product Ø capacity 20mm to 300mm. • Offshore product INNOTABLE 2000 – Powered Carousel System installation up to sea state 4 • Customised lay configuration to customers’ requirements • DNV, LR and RINA firstname.lastname@example.org ITALY – SLOVENIJA – UK - UAE
INNOTABLE 2000 – Turntable (Carousel) Unit Revision 1SYSTEM DETAILS:The INNOTABLE 2000 can be divided into an inner and outer partition in which two cables can be loaded independently ifrequired.Rotating Table, robust design manufactured from S344 grade carbon steel with sufficient structural resistance to operate to -20°C. Cable outer holding is ensured by modular fences, designed for easy handling and to facilitate mounting/dismountingoperations. Cable inner holding is manufactured from adequately re-enforced bent plate with the option of the last portion beingconical to suit Client requirements. The table bottom is covered by robust wooden segments to ensure an optimum flat surfacefor cable positioning.Motorized Drive Units, composed by two electrical motors complete with heater and anti-corrosion system mounted on theTurntable foundation for rapid mobilization/demobilization. The Emergency Breaking System is designed to be installed either tobreak between Electrical Motor and Gearboxes, or directly on Rotating Table bottom.Foundation, robust design manufactured from S355 grade carbon steel with sufficient structural resistance to operate to -20°C.Designed to distribute evenly the weight and loads of the Turntable onto the vessel deck. Foundation beams designed to be sea-fastened to the vessel deck by robust dedicated brackets. Foundation saddles are designed to allow the Motorized Drive Units tobe adjusted as well as easily accessible and controllable.The INNOTABLE 2000 can be supplied complete with INNOVO cable/umbilical management system composed by multi-floortower to install either electrical/control and/or hydraulic powerpacs, pick-up arm hydraulically drive, tensioner for cableloading/unloading and rollers/bent for cable guiding during its movement from/to turntable.DIMENSIONS AND WEIGHT: Maximum Load Capacity 2000 Metric Tons Design Accelerations Sea State 4: Transverse 8m/sec² Vertical: Gravity ±2.52 Max 12.33 m/sec² Extreme Diameter of Turntable 15.25m Outer Diameter of “Basket” (available for cable storage) 15m Inner Diameter of “Basket” (available for cable storage) 5m Foundation Envelope Diameter 14.4m Overall Turntable height (foundation & basket)* 6.49m Volume of “Basket”(available for cable storage) 645m³ Weight of Rotating Part (Slew Bearing, Wooden Floor, 105 Metric Tons Plated Inner Core & Access Ladder) Weight of Foundation (Including Drive Units) 55 Metric Tons C.O.G above deck (Including 30mm Plate) 1.8m Carousel Speed Step-less 0 to 1.0 RPM Acceleration (Fully Loaded) 0 to 1.0 RPM in 15 seconds Retardation (Fully Loaded) 1.0 to 0 RPM in 15 seconds Emergency Stop (Fully Loaded) 1.0 to 0 RPM in 8 seconds Frequency Controlled Pinion Drives 2 off @ 38KW Power Supply 3ph, 440Vac, 60Hz INNOVO Specifications and weights provided are for guidance only.
Modular TURNTABLE System – GA 2000mT turntableDescription BASKET GA 2000mT turntable main features: • Extreme diameter ofThe modular Turntable carousel = 18.25m;system is an equipment • Outer diameter ofassembly constituted by the “Basket” = 18.00m;followings: • Inner diameter of WOODEN “Basket” (core diameter)• GA 2000mT turntable; CORE = 10.00m; FLOOR• Loading arm assembly; • Height of “Basket” above• Hinge; carousel floor = 5.785m• Tower; • Total weight of carousel = 165mT;• Tensioner (5 mT); • Max load capacity =• Bottom frame assembly; 2000mT;• Tensioner (10 mT); • Power supply: 3ph, 440V,• Chute Assy; 60Hz GA 2000mT Turntable www.innovoteam.com email@example.com ITALY – SLOVENIJA – UK - UAE
Modular TURNTABLE System – GA 2000mT turntable Revision 1 Chute Assy Bottom Frame AssemblyTower assembly System details TENSIONER The modular turntable system with carrying capacity up to 2,000 tonnes, loading arm assembly, tensioners, trackways and associated equipment, shall be used for CONTROL CABIN HINGE performing cable laying 10’ CONTAINER operations. The assembly system shall be positioned on vessels/barges LOADING according to operations requirements and in ARM compliance with vessel features and dimension. STAIR 4-OFF The assembly system ASSEMBLY 20’ CONTAINER modularity offers the possibility to adapt the system configuration to Client requirements and scope of work. INNOVO Specifications and weights provided are for guidance only.
INNOVO’s Modular TOWER System Description The modular tower system is an equipment assembly constituted by the followings: • Loading arm assembly; • Hinge; • Tower modules (container); • Control cabin (10’ Container); • 10T Tensioner; • Top grillage; FRONT VIEW SIDE VIEWwww.firstname.lastname@example.org ITALY – SLOVENIJA – UK - UAE
INNOVO’S MODULAR TOWER SYSTEM Revision 1SISTEM DETAILSThe loading tower assembly system is constituted by 2 main elements:1. 6-off INNOVO 20’ modular box INNOVO MODULAR BOX L [m] B [m] T [m] W [t] Deck Capacity [t/mq] 20 6.06 2.44 2.89 9.8 82. Modular loading arm characterized by: MODULAR TRUSSED SECTION• Modular trussed sections connected each-other by flanged couplings: each section is composed by 6” and 4” pipe sizes.• Inside the arm are equally disposed some adjustable rollers equipped by self-lubricating bearings, to guide the various cables size.• The arm modularity ensures the system adaptability to different diameter turntables. ROLLERS• Inner rollers positioning gives to system an high flexibility in term of cable/umbilical sizes. INNOVO Specifications and weights provided are for guidance only.