POWER CLAMPING HEAVY DUTY HYDRAULIC VICE
A hydraulic fluid power system is defined as a means of power transmission in which
relatively incompressible fluid is used as the power transmitting media. The primary purpose
of hydraulic system is the transfer of energy from one location to another location and this
energy into useful work.
Power clamping is used for holding the job as for as quickly and maintain the constant
pressure over the job. Here in our project power clamping is done by hydraulic system.
Power clamping system consists of movable jaw, fixed jaw, and hydraulic circuit. This
movable jaw is fixed with hydraulic cylinder. When pump is switched on the hydraulic
cylinder will moves forward and holds the object very tightly. Now machining operation can
performed in a normal manner. ThenMachining operation finished D.C valve will open so
the piston goes back and oil again moves to sump.
The Hydraulic system pressure can be generated in the form of any physical action which
result a compression over the Hydraulic system or pneumatic pressure which is developed in
the form of air compressing externally can be applied to activate Hydraulic system. There is
a constant relation between pressure density, and volume, According to Bernoulli
IEEE PROJECTS & SOFTWARE DEVELOPMENTS
OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE
BANGALORE / HYDRABAD
CELL: 9894917187 | 875487 1111/2222/3333 | 8754872111 / 3111 / 4111 / 5111 / 6111
Visit: www.ecwayprojects.com Mail to: email@example.com
Quick response is achieved
Continuous operation is possible without stopping.
Power can be easily transmission.
Less loss in transmission.
Very Easy Collecting Process.
Machining work is very complicated.
Very sturdy base needed.
Hydraulics components cost is high
FIXED JAW MOVABLE JAW BACK PLATE
HYDRAULIC SUMP SHELL
INLET TO PUMP
HYDRAULIC VICE FOR MILLING