SlideShare a Scribd company logo
1 of 5
Download to read offline
International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 – 6340(Print),
ISSN 0976 – 6359(Online), Volume 6, Issue 5, May (2015), pp. 51-55© IAEME
51
STUDY OF THE EXISTING DESIGN OF IMPELLER OF 4”
SUBMERSIBLE PUMP AND IMPROVING IT’S
EFFICIENCY USING CFDA THROUGH THEORETICAL
ANALYSIS
V. RAMKUMAR
Post Graduate Student, Department of Mechanical Engineering
Kathir College of Engineering, Coimbatore - 641 062
M.PRABHU
Assistant Professor, Department of Mechanical Engineering
Kathir College of Engineering, Coimbatore – 641 062
ABSTRACT
“Harson Pumps and Motors” a company that manufactures high quality submersible pumps
of various sizes and capacity. This project deals with the modification in the existing design of
radial flow impeller made out of plastic material in many cases may be called rotor. By modifying
the design of impeller either by changing the blade angle or by changing the width we could achieve
a considerable increase in the output discharge which will be shown in the further work. Ansys
software is used to analyze the performance of pump and the equivalent output of the new impeller
design and use Pro-e for the design of impeller. After modeling the impeller we will calculate the
equivalent theoretical efficiency so as to prove that the impeller that is designed newly is of better
design than the previous one. The sole objective of this project is to increase the efficiency of the
submersible pump by increasing the net output discharge. The pump in which we are modifying the
design of impeller is 4” submersible pump.
Key Words: Submersible Pump&Impeller
INTRODUCTION
Before entering into the project details a short introduction about how this project was
undertaken. I have approached the company Harson Pumps ‘and they asked me whether I could help
them in increasing the pump‘s discharge capability. Agreeing upon their request I studied pump and
concluded that impeller re-design would be the ideal choice to improve pumps performance. In the
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND
TECHNOLOGY (IJMET)
ISSN 0976 – 6340 (Print)
ISSN 0976 – 6359 (Online)
Volume 6, Issue 5, May (2015), pp. 51-55
© IAEME: www.iaeme.com/IJMET.asp
Journal Impact Factor (2015): 8.8293 (Calculated by GISI)
www.jifactor.com
IJMET
© I A E M E
International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 – 6340(Print),
ISSN 0976 – 6359(Online), Volume 6, Issue 5, May (2015), pp. 51-55© IAEME
52
phase-1 we concentrated on studying the various submersible pumps in detail, manufactured in
industry and collected all relevant data. Also we studied the related software Catia for the purpose of
modeling, hyper mesh 11.0 for the purpose of meshing the impeller and casing and fluent 14.0 for
the purpose of analysis of pump discharge. In the Phase-2 we had done the theoretical calculation
with the standard design procedure from the book ―Centrifugal Pump Designǁ authored by John
Tuzson‘ and analysis using the above mentioned software to prove that the new design has a better
efficiency than the existing one.
STUDY OF PUMP & IMPELLER
A submersible pump (or electric submersible pump (ESP)) is a device which has a
completely sealed motor close-coupled to the pump body. The whole assembly is submerged in the
fluid to be pumped. The main advantage of this type of pump is that it prevents pump cavitation, a
problem associated with a high elevation difference between pump and the fluid surface.
Submersible pumps push fluid to the surface as opposed to jet pumps having to pull fluids.
Submersibles are more efficient than jet pumps.
Submersible pumps are installed completely underwater, including the motor. The pump
consists of an electric motor and pump combined in a single unit. Typically the pump will be
shaped like a long cylinder so that it can fit down inside of a well casing. Although most submersible
pumps are designed to be installed in a well, many can also be laid on their side on the bottom of a
lake or stream.
International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 – 6340(Print),
ISSN 0976 – 6359(Online), Volume 6, Issue 5, May (2015), pp. 51-55© IAEME
53
4” SUBMERSIBLE PUMP
• These Pumps are multistage centrifugal pumps with radial or mixed flow Noryl impellers
which operate beneath the surface of water, suitable for 4" borewell and above.
• The prime mover motors are wet type, water lubricated, water cooled and rewinding. The
stator is wound with special water proof synthetic film insulated winding wires. These pumps
are the best substitute for low efficient compressor pumps and jet pumps. This is used in
bungalows, Houses, Residential, Complexes, irrigation of fields, Industrial and rural water
supply.
BASIC COMPONENTS
The basic components of all submersible pumps are:
1. The impeller
2. The casing
3. The sealing arrangement
4. The bearing assembly
5. The drive
IMPELLER
The rotating part of a centrifugal pump is called an impeller. It consists of a series of
backward curved vanes. The impeller is mounted on a shaft which is connected to the shaft of an
electric motor. An impeller is a rotor inside a tube or conduit used to increase (or decrease in case of
turbines) the pressure and flow of a fluid.
TYPES OF IMPELLER
EXISTING CONCEPT
The main objective of this project is to improve the pump's efficiency by changing various
parameters of impeller. So by using the reverse engineering process various dimensions of the
impeller are obtained.
Asper the Existing concept,
The Exit blade angle, which is denoted by the letter (β2) is 53.4º.
International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 – 6340(Print),
ISSN 0976 – 6359(Online), Volume 6, Issue 5, May (2015), pp. 51-55© IAEME
54
PROPOSED CONCEPT
Theoretical calculation were made several types by changing various parameters of the
impeller in order to achieve the increase in output efficiency.
Finally it is achieved by changing the Exit Blade Angle (β2) to 72.5º.
METHODOLOGY FOR MODEL PREPARATION
Reverse Engineering
• Reverse engineering is the process of discovering the technological principles of a device,
object, or system through analysis of its structure, function, and operation.
• It often involves taking something (a mechanical device, electronic component, computer
program, or biological, chemical, or organic matter) apart and analyzing its workings in detail
to be used in maintenance, or to try to make a new device or program that does the same thing
without using or simply duplicating (without understanding) the original.
Dimensions Extracted by Reverse Engineering
a. Inlet blade angle (β1) = 17.19º
b. Exit blade angle (β2) = 53.4º
c. Radius
i. D = 9.35mm, R = 9.675
ii. D1 = 41.18mm R1 = 20.59mm
iii. D2 = 54.36mm R2 = 27.18mm
iv. D3 = 72.68mm R3 = 36.37mm
d. Radius of Curvature
i. RC1 = 12.974mm
ii. RC2 = 32.83mm
iii. RC3 =76.013mm.
e. Width of the impeller (B) = 4.30mm (0.0043m)
f. Outer diameter of the impeller = 72.74mm
INTRODUCTION TO HYPERMESH & ANSYS FLUENT
Meshing
Mesh generation is one of the most critical aspects of engineering simulation. Too many cells
may result in long solver runs, and too few may lead to inaccurate results. Hyper Meshing
technology provides a means to balance these requirements and obtain the right mesh for each
simulation in the most automated way possible. Hyper Meshing technology has been built on the
strengths of stand-alone, class- leading meshing tools. The strongest aspects of these separate tools
have been brought together in a single environment to produce some of the most powerful meshing
available.
Fluent
ANSYS Fluent software contains the broad physical modeling capabilities needed to model
flow, turbulence, heat transfer, and reactions for industrial applications ranging from air flow over an
aircraft wing to combustion in a furnace, from bubble columns to oil platforms, from blood flow to
semiconductor manufacturing, and from clean room design to wastewater treatment plants. Special
models that give the software the ability to model in-cylinder combustion, aero- acoustics, turbo-
machinery, and multiphase systems have served to broaden its reach.
International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 – 6340(Print),
ISSN 0976 – 6359(Online), Volume 6, Issue 5, May (2015), pp. 51-55© IAEME
55
RESULT
• It is evident from the results that there is improvement in the efficiency value in both the
methods, theoretical and analysis, adopted. The improvement in theoretical value is completely
governed by the exit blade angle of the impeller.
• There is 3% approximately improvement through theoretical calculation. Also by analysis
method using fluent the pump discharge capacity is calculated and the results of the analysis
shows the improvement in the discharge value.
• The discharge value of the existing impeller model is 0.60045 Kg/s (0.81215 l/s) and that of
the new impeller model is 0.65267 kg/s (0.88278 l/s).
• Both the results in favour of the re-design impeller it is therefore recommended to the company
to go for production based on the newly designed model of impeller.
CONCLUSION
The modeling of the impeller is one critical parameter that should be the prime concern when
considering the efficiency of the pump. Submersible pumps are used in clear water, sewage water
and also in seas. Considering all these factors we need to model an impeller in a more practical way
to suit to all these conditions. Not only is the angle of the blade that determines the output but also
the height of the blade in a closed type radial flow impeller a parameter to be kept in mind. However
there also other parameters but they have a minor impact on the pump efficiency. The software used
are Pro-e and Ansys for modeling and analysis respectively. After completing the modeling and
analysis the theoretical value of the pump efficiency is also calculated considering all the parameters.
REFERENCE
1. Tuzson John, Centrifugal Pump Design, John Wiley & Sons, INC., 2000, ISBN 0-471-36100-
3.
2. Lobanoff Val S., Ross Robert R., Centrifugal Pumps Designs & Applications, Jaico Publishing
House, 2003, ISBN 81-7224-418-5.
3. Stepanoff A.J., Centrifugal and axial flowpumps, 1993, Krieger Pub. Co. in Malabar, Fla.
4. Elder R.L., Advances of CFD in Fluid Machinery Design, 2002, John Wiley & Sons Inc.,
ISBN 13: 9781860583537.
5. Ajo Joseph, Runraj K.S and Savin Viswanathan, “Second Order Wave Force Effects on A
Semi-Submersible Platform”, International Journal of Design and Manufacturing Technology
(IJDMT), Volume 5, Issue 3, 2014, pp. 8 - 22, ISSN Print: 0976 – 6995, ISSN Online: 0976 –
7002.
6. Amruta Deshmukh and A. A. Bhole, “Optimized Design of Submersible Induction Motor
Using Maxwell 16.0 Rmxprt” International Journal of Electrical Engineering & Technology
(IJEET), Volume 5, Issue 9, 2012, pp. 39 - 44, ISSN Print : 0976-6545, ISSN Online: 0976-
6553.
7. Ibrahim R. Teaima, Alaa A. A. Gharieb and M. A. Younes, “Feasibility of Direct Pumping For
Irrigation Improvement Projects” International Journal of Mechanical Engineering &
Technology (IJMET), Volume 4, Issue 2, 2013, pp. 494 - 511, ISSN Print: 0976 – 6340, ISSN
Online: 0976 – 6359.
8. Manish Dadhich, Dharmendra Hariyani and Tarun Singh, “Flow Simulation (CFD) & Fatigue
Analysis (FEA) of A Centrifugal Pump” International Journal of Mechanical Engineering &
Technology (IJMET), Volume 3, Issue 3, 2012, pp. 67 - 83, ISSN Print: 0976 – 6340, ISSN
Online: 0976 – 6359.

More Related Content

What's hot

Optimization of design of mixed flow centrifugal pump impeller using cfd
Optimization of design of mixed flow centrifugal pump impeller using cfdOptimization of design of mixed flow centrifugal pump impeller using cfd
Optimization of design of mixed flow centrifugal pump impeller using cfdeSAT Journals
 
Cfd analysis of_centrifugal_pump
Cfd analysis of_centrifugal_pumpCfd analysis of_centrifugal_pump
Cfd analysis of_centrifugal_pumpdipak138
 
Nirmal kumar updated resume
Nirmal kumar updated resumeNirmal kumar updated resume
Nirmal kumar updated resumeNirmal Parikh
 
IRJET - Design & Manufacturing of 20 Ton Horizontal Hydraulic Press Machine f...
IRJET - Design & Manufacturing of 20 Ton Horizontal Hydraulic Press Machine f...IRJET - Design & Manufacturing of 20 Ton Horizontal Hydraulic Press Machine f...
IRJET - Design & Manufacturing of 20 Ton Horizontal Hydraulic Press Machine f...IRJET Journal
 
Cavitation Effects in Centrifugal Pumps- A Review
Cavitation Effects in Centrifugal Pumps- A ReviewCavitation Effects in Centrifugal Pumps- A Review
Cavitation Effects in Centrifugal Pumps- A ReviewIJERA Editor
 
IRJET- Design and Analysis of Industrial Impeller using Optimization Tech...
IRJET-  	  Design and Analysis of Industrial Impeller using Optimization Tech...IRJET-  	  Design and Analysis of Industrial Impeller using Optimization Tech...
IRJET- Design and Analysis of Industrial Impeller using Optimization Tech...IRJET Journal
 
IRJET- Weight Optimization of API 6D 12”-150 Class Plug Valve Body by Finite ...
IRJET- Weight Optimization of API 6D 12”-150 Class Plug Valve Body by Finite ...IRJET- Weight Optimization of API 6D 12”-150 Class Plug Valve Body by Finite ...
IRJET- Weight Optimization of API 6D 12”-150 Class Plug Valve Body by Finite ...IRJET Journal
 
Analysis About Losses of Centrifugal Pump by Matlab
Analysis About Losses of Centrifugal Pump by MatlabAnalysis About Losses of Centrifugal Pump by Matlab
Analysis About Losses of Centrifugal Pump by Matlabijceronline
 
Performance, Optimization and CFD Analysis of Submersible Pump Impeller
Performance, Optimization and CFD Analysis of Submersible Pump ImpellerPerformance, Optimization and CFD Analysis of Submersible Pump Impeller
Performance, Optimization and CFD Analysis of Submersible Pump Impellerijsrd.com
 
Modeling and Stress Analysis Of Crankshaft Using FEM Package ANSYS
Modeling and Stress Analysis Of Crankshaft Using FEM Package ANSYSModeling and Stress Analysis Of Crankshaft Using FEM Package ANSYS
Modeling and Stress Analysis Of Crankshaft Using FEM Package ANSYSIRJET Journal
 
Design procedure of an electrohydraulic drive
Design procedure of an electrohydraulic driveDesign procedure of an electrohydraulic drive
Design procedure of an electrohydraulic driveeSAT Journals
 
IRJET- Modified Pneumatic Carriage Bending Machine
IRJET- Modified Pneumatic Carriage Bending MachineIRJET- Modified Pneumatic Carriage Bending Machine
IRJET- Modified Pneumatic Carriage Bending MachineIRJET Journal
 
hydraulic robotic arm
hydraulic robotic armhydraulic robotic arm
hydraulic robotic armBijoy Mondal
 
Numerical analysis on effect of exit blade angle on cavitation in centrifu
Numerical analysis on effect of exit blade angle on cavitation in centrifuNumerical analysis on effect of exit blade angle on cavitation in centrifu
Numerical analysis on effect of exit blade angle on cavitation in centrifuIAEME Publication
 
Impeller Design
Impeller DesignImpeller Design
Impeller DesignKiruba193
 
IRJET- A Review on Design Analysis and Optimization of Centrifugal Blower
IRJET-  	  A Review on Design Analysis and Optimization of Centrifugal BlowerIRJET-  	  A Review on Design Analysis and Optimization of Centrifugal Blower
IRJET- A Review on Design Analysis and Optimization of Centrifugal BlowerIRJET Journal
 
Hydraulic arm (slmcop)5th sem... gulahmed
Hydraulic arm (slmcop)5th sem... gulahmed Hydraulic arm (slmcop)5th sem... gulahmed
Hydraulic arm (slmcop)5th sem... gulahmed ÂHméd Mêmøñ
 
IRJET- Design and Analysis of Scissor Lifiting Mechanism
IRJET-  	  Design and Analysis of Scissor Lifiting MechanismIRJET-  	  Design and Analysis of Scissor Lifiting Mechanism
IRJET- Design and Analysis of Scissor Lifiting MechanismIRJET Journal
 

What's hot (19)

Optimization of design of mixed flow centrifugal pump impeller using cfd
Optimization of design of mixed flow centrifugal pump impeller using cfdOptimization of design of mixed flow centrifugal pump impeller using cfd
Optimization of design of mixed flow centrifugal pump impeller using cfd
 
Cfd analysis of_centrifugal_pump
Cfd analysis of_centrifugal_pumpCfd analysis of_centrifugal_pump
Cfd analysis of_centrifugal_pump
 
Nirmal kumar updated resume
Nirmal kumar updated resumeNirmal kumar updated resume
Nirmal kumar updated resume
 
IRJET - Design & Manufacturing of 20 Ton Horizontal Hydraulic Press Machine f...
IRJET - Design & Manufacturing of 20 Ton Horizontal Hydraulic Press Machine f...IRJET - Design & Manufacturing of 20 Ton Horizontal Hydraulic Press Machine f...
IRJET - Design & Manufacturing of 20 Ton Horizontal Hydraulic Press Machine f...
 
Cavitation Effects in Centrifugal Pumps- A Review
Cavitation Effects in Centrifugal Pumps- A ReviewCavitation Effects in Centrifugal Pumps- A Review
Cavitation Effects in Centrifugal Pumps- A Review
 
IRJET- Design and Analysis of Industrial Impeller using Optimization Tech...
IRJET-  	  Design and Analysis of Industrial Impeller using Optimization Tech...IRJET-  	  Design and Analysis of Industrial Impeller using Optimization Tech...
IRJET- Design and Analysis of Industrial Impeller using Optimization Tech...
 
IRJET- Weight Optimization of API 6D 12”-150 Class Plug Valve Body by Finite ...
IRJET- Weight Optimization of API 6D 12”-150 Class Plug Valve Body by Finite ...IRJET- Weight Optimization of API 6D 12”-150 Class Plug Valve Body by Finite ...
IRJET- Weight Optimization of API 6D 12”-150 Class Plug Valve Body by Finite ...
 
Analysis About Losses of Centrifugal Pump by Matlab
Analysis About Losses of Centrifugal Pump by MatlabAnalysis About Losses of Centrifugal Pump by Matlab
Analysis About Losses of Centrifugal Pump by Matlab
 
Performance, Optimization and CFD Analysis of Submersible Pump Impeller
Performance, Optimization and CFD Analysis of Submersible Pump ImpellerPerformance, Optimization and CFD Analysis of Submersible Pump Impeller
Performance, Optimization and CFD Analysis of Submersible Pump Impeller
 
Ah4506175178
Ah4506175178Ah4506175178
Ah4506175178
 
Modeling and Stress Analysis Of Crankshaft Using FEM Package ANSYS
Modeling and Stress Analysis Of Crankshaft Using FEM Package ANSYSModeling and Stress Analysis Of Crankshaft Using FEM Package ANSYS
Modeling and Stress Analysis Of Crankshaft Using FEM Package ANSYS
 
Design procedure of an electrohydraulic drive
Design procedure of an electrohydraulic driveDesign procedure of an electrohydraulic drive
Design procedure of an electrohydraulic drive
 
IRJET- Modified Pneumatic Carriage Bending Machine
IRJET- Modified Pneumatic Carriage Bending MachineIRJET- Modified Pneumatic Carriage Bending Machine
IRJET- Modified Pneumatic Carriage Bending Machine
 
hydraulic robotic arm
hydraulic robotic armhydraulic robotic arm
hydraulic robotic arm
 
Numerical analysis on effect of exit blade angle on cavitation in centrifu
Numerical analysis on effect of exit blade angle on cavitation in centrifuNumerical analysis on effect of exit blade angle on cavitation in centrifu
Numerical analysis on effect of exit blade angle on cavitation in centrifu
 
Impeller Design
Impeller DesignImpeller Design
Impeller Design
 
IRJET- A Review on Design Analysis and Optimization of Centrifugal Blower
IRJET-  	  A Review on Design Analysis and Optimization of Centrifugal BlowerIRJET-  	  A Review on Design Analysis and Optimization of Centrifugal Blower
IRJET- A Review on Design Analysis and Optimization of Centrifugal Blower
 
Hydraulic arm (slmcop)5th sem... gulahmed
Hydraulic arm (slmcop)5th sem... gulahmed Hydraulic arm (slmcop)5th sem... gulahmed
Hydraulic arm (slmcop)5th sem... gulahmed
 
IRJET- Design and Analysis of Scissor Lifiting Mechanism
IRJET-  	  Design and Analysis of Scissor Lifiting MechanismIRJET-  	  Design and Analysis of Scissor Lifiting Mechanism
IRJET- Design and Analysis of Scissor Lifiting Mechanism
 

Similar to Study of the existing design of impeller of 4 submersible pump and improving its efficiency using cfda through theoretical analysis

IRJET- Design and Performance Curve Generation by CFD Analysis of Centrifugal...
IRJET- Design and Performance Curve Generation by CFD Analysis of Centrifugal...IRJET- Design and Performance Curve Generation by CFD Analysis of Centrifugal...
IRJET- Design and Performance Curve Generation by CFD Analysis of Centrifugal...IRJET Journal
 
Design, Analysis and Comparative Study of Exhaust Manifold for a Multi-Cylind...
Design, Analysis and Comparative Study of Exhaust Manifold for a Multi-Cylind...Design, Analysis and Comparative Study of Exhaust Manifold for a Multi-Cylind...
Design, Analysis and Comparative Study of Exhaust Manifold for a Multi-Cylind...IRJET Journal
 
DESIGN IMPROVEMENTS OF VARIABLE DISPLACEMENT PUMPS-A REVIEW
DESIGN IMPROVEMENTS OF VARIABLE DISPLACEMENT PUMPS-A REVIEWDESIGN IMPROVEMENTS OF VARIABLE DISPLACEMENT PUMPS-A REVIEW
DESIGN IMPROVEMENTS OF VARIABLE DISPLACEMENT PUMPS-A REVIEWijiert bestjournal
 
IRJET - Review on Design of Intake Manifold for Air Restricted Engine
IRJET - Review on Design of Intake Manifold for Air Restricted EngineIRJET - Review on Design of Intake Manifold for Air Restricted Engine
IRJET - Review on Design of Intake Manifold for Air Restricted EngineIRJET Journal
 
MECHANICAL PROJECT LIST (UNIGRAPHICS & HEPERMESH & CATIA)
MECHANICAL PROJECT LIST (UNIGRAPHICS & HEPERMESH & CATIA)MECHANICAL PROJECT LIST (UNIGRAPHICS & HEPERMESH & CATIA)
MECHANICAL PROJECT LIST (UNIGRAPHICS & HEPERMESH & CATIA)Vision Solutions
 
Study of Performance & Cavitation Characterization of Mixed Flow Centrifugal ...
Study of Performance & Cavitation Characterization of Mixed Flow Centrifugal ...Study of Performance & Cavitation Characterization of Mixed Flow Centrifugal ...
Study of Performance & Cavitation Characterization of Mixed Flow Centrifugal ...IRJET Journal
 
NEW TECHNOLOGIES USED IN AUTOMOTIVE EXHAUST SYSTEMS, REVIEW
NEW TECHNOLOGIES USED IN AUTOMOTIVE EXHAUST SYSTEMS, REVIEWNEW TECHNOLOGIES USED IN AUTOMOTIVE EXHAUST SYSTEMS, REVIEW
NEW TECHNOLOGIES USED IN AUTOMOTIVE EXHAUST SYSTEMS, REVIEWIAEME Publication
 
A Technical Review on Analysis of Centrifugal Pump.pdf
A Technical Review on Analysis of Centrifugal Pump.pdfA Technical Review on Analysis of Centrifugal Pump.pdf
A Technical Review on Analysis of Centrifugal Pump.pdfCassie Romero
 
IRJET- Computational Fluid Dynamic Analysis of Performance of Centrifugal Pum...
IRJET- Computational Fluid Dynamic Analysis of Performance of Centrifugal Pum...IRJET- Computational Fluid Dynamic Analysis of Performance of Centrifugal Pum...
IRJET- Computational Fluid Dynamic Analysis of Performance of Centrifugal Pum...IRJET Journal
 
IRJET- Analysis of Centrifugal Pump Impellers with Modified Micro Grooves
IRJET- Analysis of Centrifugal Pump Impellers with Modified Micro GroovesIRJET- Analysis of Centrifugal Pump Impellers with Modified Micro Grooves
IRJET- Analysis of Centrifugal Pump Impellers with Modified Micro GroovesIRJET Journal
 
Design and Analysis of Spiral Wind Turbine with Various Wind Speed
Design and Analysis of Spiral Wind Turbine with Various Wind SpeedDesign and Analysis of Spiral Wind Turbine with Various Wind Speed
Design and Analysis of Spiral Wind Turbine with Various Wind SpeedIRJET Journal
 
Improving Efficiency of Submersible Pump Impeller of Mixed Flow Type by Desig...
Improving Efficiency of Submersible Pump Impeller of Mixed Flow Type by Desig...Improving Efficiency of Submersible Pump Impeller of Mixed Flow Type by Desig...
Improving Efficiency of Submersible Pump Impeller of Mixed Flow Type by Desig...IRJET Journal
 
IRJET-Thermal Modeling and Analysis of High Pressure Steam Turbine Outlet Nozzle
IRJET-Thermal Modeling and Analysis of High Pressure Steam Turbine Outlet NozzleIRJET-Thermal Modeling and Analysis of High Pressure Steam Turbine Outlet Nozzle
IRJET-Thermal Modeling and Analysis of High Pressure Steam Turbine Outlet NozzleIRJET Journal
 
Structural Design and FEM Analysis of Bleeder in Steam Turbine Casing
Structural Design and FEM Analysis of Bleeder in Steam Turbine CasingStructural Design and FEM Analysis of Bleeder in Steam Turbine Casing
Structural Design and FEM Analysis of Bleeder in Steam Turbine CasingIRJET Journal
 
IRJET- Design, Analysis and Optimisation of Shock Absorber
IRJET- Design, Analysis and Optimisation of Shock AbsorberIRJET- Design, Analysis and Optimisation of Shock Absorber
IRJET- Design, Analysis and Optimisation of Shock AbsorberIRJET Journal
 
article1433749720_Fozao et al
article1433749720_Fozao et alarticle1433749720_Fozao et al
article1433749720_Fozao et allionel mbanda
 
Development of Semi-Autonomous Sheet Bending Machine
Development of Semi-Autonomous Sheet Bending MachineDevelopment of Semi-Autonomous Sheet Bending Machine
Development of Semi-Autonomous Sheet Bending MachineIRJET Journal
 
Ansys-CFX analysis to design the diffuser of a multistage pump
Ansys-CFX analysis to design the diffuser of a multistage pumpAnsys-CFX analysis to design the diffuser of a multistage pump
Ansys-CFX analysis to design the diffuser of a multistage pumpIRJET Journal
 
Study of Time Reduction in Manufacturing of Screws Used in Twin Screw Pump
Study of Time Reduction in Manufacturing of Screws Used in Twin Screw PumpStudy of Time Reduction in Manufacturing of Screws Used in Twin Screw Pump
Study of Time Reduction in Manufacturing of Screws Used in Twin Screw PumpIJMERJOURNAL
 
New technologies used in automotive exhaust systems review
New technologies used in automotive exhaust systems reviewNew technologies used in automotive exhaust systems review
New technologies used in automotive exhaust systems reviewIAEME Publication
 

Similar to Study of the existing design of impeller of 4 submersible pump and improving its efficiency using cfda through theoretical analysis (20)

IRJET- Design and Performance Curve Generation by CFD Analysis of Centrifugal...
IRJET- Design and Performance Curve Generation by CFD Analysis of Centrifugal...IRJET- Design and Performance Curve Generation by CFD Analysis of Centrifugal...
IRJET- Design and Performance Curve Generation by CFD Analysis of Centrifugal...
 
Design, Analysis and Comparative Study of Exhaust Manifold for a Multi-Cylind...
Design, Analysis and Comparative Study of Exhaust Manifold for a Multi-Cylind...Design, Analysis and Comparative Study of Exhaust Manifold for a Multi-Cylind...
Design, Analysis and Comparative Study of Exhaust Manifold for a Multi-Cylind...
 
DESIGN IMPROVEMENTS OF VARIABLE DISPLACEMENT PUMPS-A REVIEW
DESIGN IMPROVEMENTS OF VARIABLE DISPLACEMENT PUMPS-A REVIEWDESIGN IMPROVEMENTS OF VARIABLE DISPLACEMENT PUMPS-A REVIEW
DESIGN IMPROVEMENTS OF VARIABLE DISPLACEMENT PUMPS-A REVIEW
 
IRJET - Review on Design of Intake Manifold for Air Restricted Engine
IRJET - Review on Design of Intake Manifold for Air Restricted EngineIRJET - Review on Design of Intake Manifold for Air Restricted Engine
IRJET - Review on Design of Intake Manifold for Air Restricted Engine
 
MECHANICAL PROJECT LIST (UNIGRAPHICS & HEPERMESH & CATIA)
MECHANICAL PROJECT LIST (UNIGRAPHICS & HEPERMESH & CATIA)MECHANICAL PROJECT LIST (UNIGRAPHICS & HEPERMESH & CATIA)
MECHANICAL PROJECT LIST (UNIGRAPHICS & HEPERMESH & CATIA)
 
Study of Performance & Cavitation Characterization of Mixed Flow Centrifugal ...
Study of Performance & Cavitation Characterization of Mixed Flow Centrifugal ...Study of Performance & Cavitation Characterization of Mixed Flow Centrifugal ...
Study of Performance & Cavitation Characterization of Mixed Flow Centrifugal ...
 
NEW TECHNOLOGIES USED IN AUTOMOTIVE EXHAUST SYSTEMS, REVIEW
NEW TECHNOLOGIES USED IN AUTOMOTIVE EXHAUST SYSTEMS, REVIEWNEW TECHNOLOGIES USED IN AUTOMOTIVE EXHAUST SYSTEMS, REVIEW
NEW TECHNOLOGIES USED IN AUTOMOTIVE EXHAUST SYSTEMS, REVIEW
 
A Technical Review on Analysis of Centrifugal Pump.pdf
A Technical Review on Analysis of Centrifugal Pump.pdfA Technical Review on Analysis of Centrifugal Pump.pdf
A Technical Review on Analysis of Centrifugal Pump.pdf
 
IRJET- Computational Fluid Dynamic Analysis of Performance of Centrifugal Pum...
IRJET- Computational Fluid Dynamic Analysis of Performance of Centrifugal Pum...IRJET- Computational Fluid Dynamic Analysis of Performance of Centrifugal Pum...
IRJET- Computational Fluid Dynamic Analysis of Performance of Centrifugal Pum...
 
IRJET- Analysis of Centrifugal Pump Impellers with Modified Micro Grooves
IRJET- Analysis of Centrifugal Pump Impellers with Modified Micro GroovesIRJET- Analysis of Centrifugal Pump Impellers with Modified Micro Grooves
IRJET- Analysis of Centrifugal Pump Impellers with Modified Micro Grooves
 
Design and Analysis of Spiral Wind Turbine with Various Wind Speed
Design and Analysis of Spiral Wind Turbine with Various Wind SpeedDesign and Analysis of Spiral Wind Turbine with Various Wind Speed
Design and Analysis of Spiral Wind Turbine with Various Wind Speed
 
Improving Efficiency of Submersible Pump Impeller of Mixed Flow Type by Desig...
Improving Efficiency of Submersible Pump Impeller of Mixed Flow Type by Desig...Improving Efficiency of Submersible Pump Impeller of Mixed Flow Type by Desig...
Improving Efficiency of Submersible Pump Impeller of Mixed Flow Type by Desig...
 
IRJET-Thermal Modeling and Analysis of High Pressure Steam Turbine Outlet Nozzle
IRJET-Thermal Modeling and Analysis of High Pressure Steam Turbine Outlet NozzleIRJET-Thermal Modeling and Analysis of High Pressure Steam Turbine Outlet Nozzle
IRJET-Thermal Modeling and Analysis of High Pressure Steam Turbine Outlet Nozzle
 
Structural Design and FEM Analysis of Bleeder in Steam Turbine Casing
Structural Design and FEM Analysis of Bleeder in Steam Turbine CasingStructural Design and FEM Analysis of Bleeder in Steam Turbine Casing
Structural Design and FEM Analysis of Bleeder in Steam Turbine Casing
 
IRJET- Design, Analysis and Optimisation of Shock Absorber
IRJET- Design, Analysis and Optimisation of Shock AbsorberIRJET- Design, Analysis and Optimisation of Shock Absorber
IRJET- Design, Analysis and Optimisation of Shock Absorber
 
article1433749720_Fozao et al
article1433749720_Fozao et alarticle1433749720_Fozao et al
article1433749720_Fozao et al
 
Development of Semi-Autonomous Sheet Bending Machine
Development of Semi-Autonomous Sheet Bending MachineDevelopment of Semi-Autonomous Sheet Bending Machine
Development of Semi-Autonomous Sheet Bending Machine
 
Ansys-CFX analysis to design the diffuser of a multistage pump
Ansys-CFX analysis to design the diffuser of a multistage pumpAnsys-CFX analysis to design the diffuser of a multistage pump
Ansys-CFX analysis to design the diffuser of a multistage pump
 
Study of Time Reduction in Manufacturing of Screws Used in Twin Screw Pump
Study of Time Reduction in Manufacturing of Screws Used in Twin Screw PumpStudy of Time Reduction in Manufacturing of Screws Used in Twin Screw Pump
Study of Time Reduction in Manufacturing of Screws Used in Twin Screw Pump
 
New technologies used in automotive exhaust systems review
New technologies used in automotive exhaust systems reviewNew technologies used in automotive exhaust systems review
New technologies used in automotive exhaust systems review
 

More from IAEME Publication

IAEME_Publication_Call_for_Paper_September_2022.pdf
IAEME_Publication_Call_for_Paper_September_2022.pdfIAEME_Publication_Call_for_Paper_September_2022.pdf
IAEME_Publication_Call_for_Paper_September_2022.pdfIAEME Publication
 
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...IAEME Publication
 
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSA STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSIAEME Publication
 
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSBROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSIAEME Publication
 
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSDETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSIAEME Publication
 
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSIAEME Publication
 
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOVOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOIAEME Publication
 
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IAEME Publication
 
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYVISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYIAEME Publication
 
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...IAEME Publication
 
GANDHI ON NON-VIOLENT POLICE
GANDHI ON NON-VIOLENT POLICEGANDHI ON NON-VIOLENT POLICE
GANDHI ON NON-VIOLENT POLICEIAEME Publication
 
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...IAEME Publication
 
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...IAEME Publication
 
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...IAEME Publication
 
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...IAEME Publication
 
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...IAEME Publication
 
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...IAEME Publication
 
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...IAEME Publication
 
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...IAEME Publication
 
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTA MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTIAEME Publication
 

More from IAEME Publication (20)

IAEME_Publication_Call_for_Paper_September_2022.pdf
IAEME_Publication_Call_for_Paper_September_2022.pdfIAEME_Publication_Call_for_Paper_September_2022.pdf
IAEME_Publication_Call_for_Paper_September_2022.pdf
 
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
 
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSA STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
 
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSBROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
 
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSDETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
 
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
 
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOVOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
 
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
 
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYVISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
 
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
 
GANDHI ON NON-VIOLENT POLICE
GANDHI ON NON-VIOLENT POLICEGANDHI ON NON-VIOLENT POLICE
GANDHI ON NON-VIOLENT POLICE
 
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
 
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
 
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
 
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
 
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
 
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
 
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
 
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
 
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTA MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
 

Recently uploaded

Phase noise transfer functions.pptx
Phase noise transfer      functions.pptxPhase noise transfer      functions.pptx
Phase noise transfer functions.pptxSaiGouthamSunkara
 
Multicomponent Spiral Wound Membrane Separation Model.pdf
Multicomponent Spiral Wound Membrane Separation Model.pdfMulticomponent Spiral Wound Membrane Separation Model.pdf
Multicomponent Spiral Wound Membrane Separation Model.pdfGiovanaGhasary1
 
solar wireless electric vechicle charging system
solar wireless electric vechicle charging systemsolar wireless electric vechicle charging system
solar wireless electric vechicle charging systemgokuldongala
 
IT3401-WEB ESSENTIALS PRESENTATIONS.pptx
IT3401-WEB ESSENTIALS PRESENTATIONS.pptxIT3401-WEB ESSENTIALS PRESENTATIONS.pptx
IT3401-WEB ESSENTIALS PRESENTATIONS.pptxSAJITHABANUS
 
Graphics Primitives and CG Display Devices
Graphics Primitives and CG Display DevicesGraphics Primitives and CG Display Devices
Graphics Primitives and CG Display DevicesDIPIKA83
 
me3493 manufacturing technology unit 1 Part A
me3493 manufacturing technology unit 1 Part Ame3493 manufacturing technology unit 1 Part A
me3493 manufacturing technology unit 1 Part Akarthi keyan
 
SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....
SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....
SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....santhyamuthu1
 
Gender Bias in Engineer, Honors 203 Project
Gender Bias in Engineer, Honors 203 ProjectGender Bias in Engineer, Honors 203 Project
Gender Bias in Engineer, Honors 203 Projectreemakb03
 
Landsman converter for power factor improvement
Landsman converter for power factor improvementLandsman converter for power factor improvement
Landsman converter for power factor improvementVijayMuni2
 
Best-NO1 Best Rohani Amil In Lahore Kala Ilam In Lahore Kala Jadu Amil In Lah...
Best-NO1 Best Rohani Amil In Lahore Kala Ilam In Lahore Kala Jadu Amil In Lah...Best-NO1 Best Rohani Amil In Lahore Kala Ilam In Lahore Kala Jadu Amil In Lah...
Best-NO1 Best Rohani Amil In Lahore Kala Ilam In Lahore Kala Jadu Amil In Lah...Amil baba
 
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdf
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdfsdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdf
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdfJulia Kaye
 
Dev.bg DevOps March 2024 Monitoring & Logging
Dev.bg DevOps March 2024 Monitoring & LoggingDev.bg DevOps March 2024 Monitoring & Logging
Dev.bg DevOps March 2024 Monitoring & LoggingMarian Marinov
 
Mohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptxMohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptxKISHAN KUMAR
 
EPE3163_Hydro power stations_Unit2_Lect2.pptx
EPE3163_Hydro power stations_Unit2_Lect2.pptxEPE3163_Hydro power stations_Unit2_Lect2.pptx
EPE3163_Hydro power stations_Unit2_Lect2.pptxJoseeMusabyimana
 
Renewable Energy & Entrepreneurship Workshop_21Feb2024.pdf
Renewable Energy & Entrepreneurship Workshop_21Feb2024.pdfRenewable Energy & Entrepreneurship Workshop_21Feb2024.pdf
Renewable Energy & Entrepreneurship Workshop_21Feb2024.pdfodunowoeminence2019
 
GENERAL CONDITIONS FOR CONTRACTS OF CIVIL ENGINEERING WORKS
GENERAL CONDITIONS  FOR  CONTRACTS OF CIVIL ENGINEERING WORKS GENERAL CONDITIONS  FOR  CONTRACTS OF CIVIL ENGINEERING WORKS
GENERAL CONDITIONS FOR CONTRACTS OF CIVIL ENGINEERING WORKS Bahzad5
 
Engineering Mechanics Chapter 5 Equilibrium of a Rigid Body
Engineering Mechanics  Chapter 5  Equilibrium of a Rigid BodyEngineering Mechanics  Chapter 5  Equilibrium of a Rigid Body
Engineering Mechanics Chapter 5 Equilibrium of a Rigid BodyAhmadHajasad2
 
Basic Principle of Electrochemical Sensor
Basic Principle of  Electrochemical SensorBasic Principle of  Electrochemical Sensor
Basic Principle of Electrochemical SensorTanvir Moin
 

Recently uploaded (20)

Lecture 2 .pdf
Lecture 2                           .pdfLecture 2                           .pdf
Lecture 2 .pdf
 
Phase noise transfer functions.pptx
Phase noise transfer      functions.pptxPhase noise transfer      functions.pptx
Phase noise transfer functions.pptx
 
Lecture 2 .pptx
Lecture 2                            .pptxLecture 2                            .pptx
Lecture 2 .pptx
 
Multicomponent Spiral Wound Membrane Separation Model.pdf
Multicomponent Spiral Wound Membrane Separation Model.pdfMulticomponent Spiral Wound Membrane Separation Model.pdf
Multicomponent Spiral Wound Membrane Separation Model.pdf
 
solar wireless electric vechicle charging system
solar wireless electric vechicle charging systemsolar wireless electric vechicle charging system
solar wireless electric vechicle charging system
 
IT3401-WEB ESSENTIALS PRESENTATIONS.pptx
IT3401-WEB ESSENTIALS PRESENTATIONS.pptxIT3401-WEB ESSENTIALS PRESENTATIONS.pptx
IT3401-WEB ESSENTIALS PRESENTATIONS.pptx
 
Graphics Primitives and CG Display Devices
Graphics Primitives and CG Display DevicesGraphics Primitives and CG Display Devices
Graphics Primitives and CG Display Devices
 
me3493 manufacturing technology unit 1 Part A
me3493 manufacturing technology unit 1 Part Ame3493 manufacturing technology unit 1 Part A
me3493 manufacturing technology unit 1 Part A
 
SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....
SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....
SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....
 
Gender Bias in Engineer, Honors 203 Project
Gender Bias in Engineer, Honors 203 ProjectGender Bias in Engineer, Honors 203 Project
Gender Bias in Engineer, Honors 203 Project
 
Landsman converter for power factor improvement
Landsman converter for power factor improvementLandsman converter for power factor improvement
Landsman converter for power factor improvement
 
Best-NO1 Best Rohani Amil In Lahore Kala Ilam In Lahore Kala Jadu Amil In Lah...
Best-NO1 Best Rohani Amil In Lahore Kala Ilam In Lahore Kala Jadu Amil In Lah...Best-NO1 Best Rohani Amil In Lahore Kala Ilam In Lahore Kala Jadu Amil In Lah...
Best-NO1 Best Rohani Amil In Lahore Kala Ilam In Lahore Kala Jadu Amil In Lah...
 
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdf
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdfsdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdf
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdf
 
Dev.bg DevOps March 2024 Monitoring & Logging
Dev.bg DevOps March 2024 Monitoring & LoggingDev.bg DevOps March 2024 Monitoring & Logging
Dev.bg DevOps March 2024 Monitoring & Logging
 
Mohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptxMohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptx
 
EPE3163_Hydro power stations_Unit2_Lect2.pptx
EPE3163_Hydro power stations_Unit2_Lect2.pptxEPE3163_Hydro power stations_Unit2_Lect2.pptx
EPE3163_Hydro power stations_Unit2_Lect2.pptx
 
Renewable Energy & Entrepreneurship Workshop_21Feb2024.pdf
Renewable Energy & Entrepreneurship Workshop_21Feb2024.pdfRenewable Energy & Entrepreneurship Workshop_21Feb2024.pdf
Renewable Energy & Entrepreneurship Workshop_21Feb2024.pdf
 
GENERAL CONDITIONS FOR CONTRACTS OF CIVIL ENGINEERING WORKS
GENERAL CONDITIONS  FOR  CONTRACTS OF CIVIL ENGINEERING WORKS GENERAL CONDITIONS  FOR  CONTRACTS OF CIVIL ENGINEERING WORKS
GENERAL CONDITIONS FOR CONTRACTS OF CIVIL ENGINEERING WORKS
 
Engineering Mechanics Chapter 5 Equilibrium of a Rigid Body
Engineering Mechanics  Chapter 5  Equilibrium of a Rigid BodyEngineering Mechanics  Chapter 5  Equilibrium of a Rigid Body
Engineering Mechanics Chapter 5 Equilibrium of a Rigid Body
 
Basic Principle of Electrochemical Sensor
Basic Principle of  Electrochemical SensorBasic Principle of  Electrochemical Sensor
Basic Principle of Electrochemical Sensor
 

Study of the existing design of impeller of 4 submersible pump and improving its efficiency using cfda through theoretical analysis

  • 1. International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 – 6340(Print), ISSN 0976 – 6359(Online), Volume 6, Issue 5, May (2015), pp. 51-55© IAEME 51 STUDY OF THE EXISTING DESIGN OF IMPELLER OF 4” SUBMERSIBLE PUMP AND IMPROVING IT’S EFFICIENCY USING CFDA THROUGH THEORETICAL ANALYSIS V. RAMKUMAR Post Graduate Student, Department of Mechanical Engineering Kathir College of Engineering, Coimbatore - 641 062 M.PRABHU Assistant Professor, Department of Mechanical Engineering Kathir College of Engineering, Coimbatore – 641 062 ABSTRACT “Harson Pumps and Motors” a company that manufactures high quality submersible pumps of various sizes and capacity. This project deals with the modification in the existing design of radial flow impeller made out of plastic material in many cases may be called rotor. By modifying the design of impeller either by changing the blade angle or by changing the width we could achieve a considerable increase in the output discharge which will be shown in the further work. Ansys software is used to analyze the performance of pump and the equivalent output of the new impeller design and use Pro-e for the design of impeller. After modeling the impeller we will calculate the equivalent theoretical efficiency so as to prove that the impeller that is designed newly is of better design than the previous one. The sole objective of this project is to increase the efficiency of the submersible pump by increasing the net output discharge. The pump in which we are modifying the design of impeller is 4” submersible pump. Key Words: Submersible Pump&Impeller INTRODUCTION Before entering into the project details a short introduction about how this project was undertaken. I have approached the company Harson Pumps ‘and they asked me whether I could help them in increasing the pump‘s discharge capability. Agreeing upon their request I studied pump and concluded that impeller re-design would be the ideal choice to improve pumps performance. In the INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) ISSN 0976 – 6340 (Print) ISSN 0976 – 6359 (Online) Volume 6, Issue 5, May (2015), pp. 51-55 © IAEME: www.iaeme.com/IJMET.asp Journal Impact Factor (2015): 8.8293 (Calculated by GISI) www.jifactor.com IJMET © I A E M E
  • 2. International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 – 6340(Print), ISSN 0976 – 6359(Online), Volume 6, Issue 5, May (2015), pp. 51-55© IAEME 52 phase-1 we concentrated on studying the various submersible pumps in detail, manufactured in industry and collected all relevant data. Also we studied the related software Catia for the purpose of modeling, hyper mesh 11.0 for the purpose of meshing the impeller and casing and fluent 14.0 for the purpose of analysis of pump discharge. In the Phase-2 we had done the theoretical calculation with the standard design procedure from the book ―Centrifugal Pump Designǁ authored by John Tuzson‘ and analysis using the above mentioned software to prove that the new design has a better efficiency than the existing one. STUDY OF PUMP & IMPELLER A submersible pump (or electric submersible pump (ESP)) is a device which has a completely sealed motor close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. The main advantage of this type of pump is that it prevents pump cavitation, a problem associated with a high elevation difference between pump and the fluid surface. Submersible pumps push fluid to the surface as opposed to jet pumps having to pull fluids. Submersibles are more efficient than jet pumps. Submersible pumps are installed completely underwater, including the motor. The pump consists of an electric motor and pump combined in a single unit. Typically the pump will be shaped like a long cylinder so that it can fit down inside of a well casing. Although most submersible pumps are designed to be installed in a well, many can also be laid on their side on the bottom of a lake or stream.
  • 3. International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 – 6340(Print), ISSN 0976 – 6359(Online), Volume 6, Issue 5, May (2015), pp. 51-55© IAEME 53 4” SUBMERSIBLE PUMP • These Pumps are multistage centrifugal pumps with radial or mixed flow Noryl impellers which operate beneath the surface of water, suitable for 4" borewell and above. • The prime mover motors are wet type, water lubricated, water cooled and rewinding. The stator is wound with special water proof synthetic film insulated winding wires. These pumps are the best substitute for low efficient compressor pumps and jet pumps. This is used in bungalows, Houses, Residential, Complexes, irrigation of fields, Industrial and rural water supply. BASIC COMPONENTS The basic components of all submersible pumps are: 1. The impeller 2. The casing 3. The sealing arrangement 4. The bearing assembly 5. The drive IMPELLER The rotating part of a centrifugal pump is called an impeller. It consists of a series of backward curved vanes. The impeller is mounted on a shaft which is connected to the shaft of an electric motor. An impeller is a rotor inside a tube or conduit used to increase (or decrease in case of turbines) the pressure and flow of a fluid. TYPES OF IMPELLER EXISTING CONCEPT The main objective of this project is to improve the pump's efficiency by changing various parameters of impeller. So by using the reverse engineering process various dimensions of the impeller are obtained. Asper the Existing concept, The Exit blade angle, which is denoted by the letter (β2) is 53.4º.
  • 4. International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 – 6340(Print), ISSN 0976 – 6359(Online), Volume 6, Issue 5, May (2015), pp. 51-55© IAEME 54 PROPOSED CONCEPT Theoretical calculation were made several types by changing various parameters of the impeller in order to achieve the increase in output efficiency. Finally it is achieved by changing the Exit Blade Angle (β2) to 72.5º. METHODOLOGY FOR MODEL PREPARATION Reverse Engineering • Reverse engineering is the process of discovering the technological principles of a device, object, or system through analysis of its structure, function, and operation. • It often involves taking something (a mechanical device, electronic component, computer program, or biological, chemical, or organic matter) apart and analyzing its workings in detail to be used in maintenance, or to try to make a new device or program that does the same thing without using or simply duplicating (without understanding) the original. Dimensions Extracted by Reverse Engineering a. Inlet blade angle (β1) = 17.19º b. Exit blade angle (β2) = 53.4º c. Radius i. D = 9.35mm, R = 9.675 ii. D1 = 41.18mm R1 = 20.59mm iii. D2 = 54.36mm R2 = 27.18mm iv. D3 = 72.68mm R3 = 36.37mm d. Radius of Curvature i. RC1 = 12.974mm ii. RC2 = 32.83mm iii. RC3 =76.013mm. e. Width of the impeller (B) = 4.30mm (0.0043m) f. Outer diameter of the impeller = 72.74mm INTRODUCTION TO HYPERMESH & ANSYS FLUENT Meshing Mesh generation is one of the most critical aspects of engineering simulation. Too many cells may result in long solver runs, and too few may lead to inaccurate results. Hyper Meshing technology provides a means to balance these requirements and obtain the right mesh for each simulation in the most automated way possible. Hyper Meshing technology has been built on the strengths of stand-alone, class- leading meshing tools. The strongest aspects of these separate tools have been brought together in a single environment to produce some of the most powerful meshing available. Fluent ANSYS Fluent software contains the broad physical modeling capabilities needed to model flow, turbulence, heat transfer, and reactions for industrial applications ranging from air flow over an aircraft wing to combustion in a furnace, from bubble columns to oil platforms, from blood flow to semiconductor manufacturing, and from clean room design to wastewater treatment plants. Special models that give the software the ability to model in-cylinder combustion, aero- acoustics, turbo- machinery, and multiphase systems have served to broaden its reach.
  • 5. International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 – 6340(Print), ISSN 0976 – 6359(Online), Volume 6, Issue 5, May (2015), pp. 51-55© IAEME 55 RESULT • It is evident from the results that there is improvement in the efficiency value in both the methods, theoretical and analysis, adopted. The improvement in theoretical value is completely governed by the exit blade angle of the impeller. • There is 3% approximately improvement through theoretical calculation. Also by analysis method using fluent the pump discharge capacity is calculated and the results of the analysis shows the improvement in the discharge value. • The discharge value of the existing impeller model is 0.60045 Kg/s (0.81215 l/s) and that of the new impeller model is 0.65267 kg/s (0.88278 l/s). • Both the results in favour of the re-design impeller it is therefore recommended to the company to go for production based on the newly designed model of impeller. CONCLUSION The modeling of the impeller is one critical parameter that should be the prime concern when considering the efficiency of the pump. Submersible pumps are used in clear water, sewage water and also in seas. Considering all these factors we need to model an impeller in a more practical way to suit to all these conditions. Not only is the angle of the blade that determines the output but also the height of the blade in a closed type radial flow impeller a parameter to be kept in mind. However there also other parameters but they have a minor impact on the pump efficiency. The software used are Pro-e and Ansys for modeling and analysis respectively. After completing the modeling and analysis the theoretical value of the pump efficiency is also calculated considering all the parameters. REFERENCE 1. Tuzson John, Centrifugal Pump Design, John Wiley & Sons, INC., 2000, ISBN 0-471-36100- 3. 2. Lobanoff Val S., Ross Robert R., Centrifugal Pumps Designs & Applications, Jaico Publishing House, 2003, ISBN 81-7224-418-5. 3. Stepanoff A.J., Centrifugal and axial flowpumps, 1993, Krieger Pub. Co. in Malabar, Fla. 4. Elder R.L., Advances of CFD in Fluid Machinery Design, 2002, John Wiley & Sons Inc., ISBN 13: 9781860583537. 5. Ajo Joseph, Runraj K.S and Savin Viswanathan, “Second Order Wave Force Effects on A Semi-Submersible Platform”, International Journal of Design and Manufacturing Technology (IJDMT), Volume 5, Issue 3, 2014, pp. 8 - 22, ISSN Print: 0976 – 6995, ISSN Online: 0976 – 7002. 6. Amruta Deshmukh and A. A. Bhole, “Optimized Design of Submersible Induction Motor Using Maxwell 16.0 Rmxprt” International Journal of Electrical Engineering & Technology (IJEET), Volume 5, Issue 9, 2012, pp. 39 - 44, ISSN Print : 0976-6545, ISSN Online: 0976- 6553. 7. Ibrahim R. Teaima, Alaa A. A. Gharieb and M. A. Younes, “Feasibility of Direct Pumping For Irrigation Improvement Projects” International Journal of Mechanical Engineering & Technology (IJMET), Volume 4, Issue 2, 2013, pp. 494 - 511, ISSN Print: 0976 – 6340, ISSN Online: 0976 – 6359. 8. Manish Dadhich, Dharmendra Hariyani and Tarun Singh, “Flow Simulation (CFD) & Fatigue Analysis (FEA) of A Centrifugal Pump” International Journal of Mechanical Engineering & Technology (IJMET), Volume 3, Issue 3, 2012, pp. 67 - 83, ISSN Print: 0976 – 6340, ISSN Online: 0976 – 6359.