Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

The Hotfoil-EHS Fusion45 Induction Heater

1,119 views

Published on

Induction heating can improve your bottom line by decreasing weld failures, and decreasing setup and tear down times. The technology allows for accurate temp control, without heavy electrical service or complicated controls. The portability and ease of use will allow you to heat more welds faster.

Published in: Engineering
  • Be the first to comment

  • Be the first to like this

The Hotfoil-EHS Fusion45 Induction Heater

  1. 1. FUSION 45 45KVA INDUCTION CONSOLE
  2. 2. FEATURES • 45 KVA RATING • 480V, 60A 3PH SUPPLY • FULLY GROUNDED ENCLOSURE • EASY TO USE CONTROLS • ROBUST CAM-LOCK CONNECTORS FOR FEEDER AND INDUCTOR HOSES • HEAVY DUTY WHEELS AND LIFTING EYES Mobile, Robust Technology MADE TO WORK IN YOUR ENVIRONMENT Heat treating isn’t done in a laboratory, or a clean room. Applications are out in the real world, where dirt, grease and grime are normal. Hotfoil’s new induction heater is designed to work in the toughest conditions, and continue to run shift after shift. Induction heating can improve your bottom line by decreasing weld failures, and decreasing setup and tear down times. The technology allows for accurate temp control, without heavy electrical service or complicated controls. The portability and ease of use will allow you to heat more welds faster SPEED UP PIPE PREHEATS 16” OD 0.25” wall preheated to 450° in under a minute. Using our premade blankets makes setup just as fast. . www.HotfoilE DURABLE CONNECTORS
  3. 3. Faster Heat Treating & Decreased Weld Failures CABLES TO SUIT YOUR NEEDS Our induction cables are made from top quality material and specially designed to be flexible and durable. The user is protected from high voltages by cam-locked connections. Our two-cable system increases the lifetime of the cables. The water cooled inductor cable is made from a yarn-reinforced hose which can be easily wrapped around the workpiece with good cut resistance. Together, this system allows for quick workpiece setup, allowing your crew to get more done with less downtime. POWERED BY NANODAC The Fusion 45 is powered by the Eurothem Nanodac controller. It has a step programmer, 4 thermocouple inputs, data logging, and remote viewing. The Nanodac also has advanced features like automatic T/C swapping for preheating and chart creation using the free Review software on your PC. foilEHS.com SIMPLE, ONE-SIDED INTERFACE ACCESSIBLE CABINET
  4. 4. Hotfoil-EHS, Inc. 2960 East State Street Ext. Hamilton, NJ 08619 Phone: 609.588.0900 Fax: 609.588.8333 Email: dap@hotfoilehs.com Website: www.hotfoilehs.com

×