ISO 9001 CertIfIed
T      he Milliken Valve Company designs, develops, manufactures       and markets plug, butterfly, and check valves and t...
Plug ValvesThe Milliken Millcentric Plug Valve is availablein sizes ranging from 1/2"– 72" and is designedspecifically for...
Check ValvesCCNE SeriesCCNE Series 8000, 9000 and 8500 Swing CheckValves are self-contained, free-swinging disc stylewith ...
Milliken Flex CheckIn keeping with Milliken’s commitment to quality,reliability and value the ductile iron Flex Checkconti...
AWWAButterflyValvesMilliken AWWA butterfly valves meet therequirements of AWWA C504 standards and areused for shutoff of b...
Notes        page 5
Series 600/601                                  Series 601SS                                       Series 601RL           ...
Upcoming SlideShare
Loading in …5
×

Milliken Fully Rubber Lined Plug Valves & AWWA Butterfly Valves

1,383 views

Published on

Published in: Business
1 Comment
0 Likes
Statistics
Notes
  • Get a customised B2B digital marketing solutions from VALVE SOLUTIONS. visit us and drop us your valuable enquiries for a special promotional offer.
       Reply 
    Are you sure you want to  Yes  No
    Your message goes here
  • Be the first to like this

No Downloads
Views
Total views
1,383
On SlideShare
0
From Embeds
0
Number of Embeds
4
Actions
Shares
0
Downloads
0
Comments
1
Likes
0
Embeds 0
No embeds

No notes for slide

Milliken Fully Rubber Lined Plug Valves & AWWA Butterfly Valves

  1. 1. ISO 9001 CertIfIed
  2. 2. T he Milliken Valve Company designs, develops, manufactures and markets plug, butterfly, and check valves and their respective controls and actuators. These valves are used primarily in the water, wastewater, and industrial markets.Milliken Valve was started over two decades ago manufacturing theeccentric plug valve for the waste water and HVAC marketplace.Growth has been constant with the addition of a AWWA butterflyvalve, general service butterfly valve, swing check valve, rubberflapper check valve, double disc check valve, wafer (outside spring)check valve, globe style check valve and compact wafer check valve.As Milliken has added products over the years, it has been necessaryto expand the manufacturing facility as well. Milliken is currentlyin its fourth facility with over 100,000 square feet of manufacturingspace. The facility is currently located in Bethlehem, Pennsylvania.Milliken believes that in order to satisfy customers, our productsneed to be considered the best design and the highest quality withinthe industry. All of our valves have had extensive testing before theyare marketed or sold. Milliken’s quality standards are a step abovethe industry norm, and Milliken is committed to standing behind itsproducts in the field. All valves are tested in complete conformanceto applicable standards before shipment. In addition, valve designsare routinely sent to independent testing facilities to ensure theymeet or exceed expectations.
  3. 3. Plug ValvesThe Milliken Millcentric Plug Valve is availablein sizes ranging from 1/2"– 72" and is designedspecifically for wastewater applications. The roundport design is available on sizes ½"-12", offers lessresistance to slurry, sludge, and fluid flow resultingin less erosion, longer service life, and reducedpumping costs. The large round port design can passlarger solids reducing plugging problems. Round portvalves offer better flow characteristics resulting inless pressure drop across the valve. Pressure ratingon 12" and smaller is 175 psi, pressure rating on 14"and larger is 150 psi. Higher pressures are availableon request.Milliken’s plug valve line includes our MultiportPlug Valve. Combining simplicity of design withhigh quality manufacturing process, the MultiportMillcentric valve provides high flow and large solidspassage, permitting smaller valves to be used withoutsacrificing flow integrity. Simplicity of design with high quality manufacturing page 1
  4. 4. Check ValvesCCNE SeriesCCNE Series 8000, 9000 and 8500 Swing CheckValves are self-contained, free-swinging disc stylewith outside lever and weight or outside leverand spring. Valves conform to all standards setforth in AWWA C508, latest edition. Best used inwastewater, water, sewage, oil, and gas applications.The 8000 series are produced with cast iron body,bronze or stainless steel body seat rings, Bronze,Buna-N or EPDM disc inserts, and hinge pinsof corrosion resistant stainless steel. The 9000Series feature enlarged hinge pins and upgradedmaterials of construction to handle the additionalrequirements of an air or oil cushion. They areproduced in cast iron body, bronze or stainlesssteel body seat rings, Bronze, Buna-N or EPDMdisc inserts, and hinge pins of corrosion resistantstainless steel. Valves are field convertible to bronzeair cushion or oil cushion systems. The 8500 seriesis a high pressure check valve rated to 350 psi. Valvebodies are ductile iron standard and the valves comeequipped with a stainless steel body seat ring andair cushion. All CCNE check valves have internaland external epoxy coating conforming to AWWAC550 standard. Valves are designed for horizontalor vertical installations and for uninterruptedcontinuous service. Simplicity of design with high quality manufacturingpage 2
  5. 5. Milliken Flex CheckIn keeping with Milliken’s commitment to quality,reliability and value the ductile iron Flex Checkcontinues to set the standard. Simplicity andinnovation are designed into each valve to providedependable maintenance free performance. Specifywith confidence: The Milliken Flex Check hasundergone a rigorous 1,000,000 continuous cycletest with no signs of wear or distortion to the valvedisc or seat. Test results are available from anindependent testing facility upon request.The only moving part in the Flex Check is in the discwhich features a fully encapsulated steel disc withnylon reinforcement in the flex area. The moldedelastomer with integral o-ring ensures a bubble tightshut off preventing backflow. The Milliken FlexCheck is rated at 285 psi.The flow area of the Milliken Flex Check is equal toor greater than the equivalent pipe size throughout,resulting in low head losses compared to other typesof check valves. The Milliken Flex Check is suitablefor installation in both horizontal and verticalpipelines with flow upward. Options such as positionindicator and backflush device are available.Spring Loaded Check ValvesThe Milliken Series of spring loaded check valvesare designed to provide reliable performance inapplications where non-slam closure in clear fluidsis required. Available in double-disc, center guidedglobe pattern or compact wafer designs; each modelprovides an economical solution to prevent flowreversal and combat water hammer. page 3
  6. 6. AWWAButterflyValvesMilliken AWWA butterfly valves meet therequirements of AWWA C504 standards and areused for shutoff of both clean and dirty water. Theseat in body design is offered with either flangedor mechanical joint ends and the Milliken butterflyvalve is available in sizes ranging from 3" to 72" (upto 48" for mechanical joint). The use of ductile ironfor the valve’s body and disc translates into greatersurge resistance and longer life of the valve. TheMilliken 20" and smaller valve comes standard withan internal and external fusion epoxy coating, and the24" and larger valves come standard with a internaland external liquid epoxy coating. On valves 24"-72"in size the flow through disc design results in lowerhead-loss than solid or hollow disc designs. All valves24" and larger have a mechanically retained rubberseat in the body that allows for easy 2 way adjustmentin the field without the need for special tools. Simplicity of design with high quality manufacturingpage 4
  7. 7. Notes page 5
  8. 8. Series 600/601 Series 601SS Series 601RL Series 602Eccentric Plug Valve Eccentric Plug Valve Eccentric Plug Valve Eccentric Plug ValveWelded Nickel Seat Flanged and MJ Integral Stainless Seat Soft or Hard Rubber Lining Rubber Lined Welded Nickel Seat High PressureStainless Steel Bearings Stainless Bearings Stainless Steel Bearings Stainless Steel BearingsANSI-B16.1 Flanges Stainless Steel Body ANSI B16.1 Flanges ANSI B16.1 Class 250 FlangesSolid Ductile Iron Plug ANSI B16.5 Class 150 Flanges Solid Ductile Iron Plug Solid Ductile Iron PlugLow Pressure Drop Solid Stainless Steel Plug Low Pressure Drop Low Pressure DropFlanged & MJ Ends Low Pressure Drop Sizes 3"-54" Sizes 2-1/2"-54"Sizes 2"-72" FL Size: 1/2"-24" Metal Plugs AvailableSizes 3"-48" MJ – Consult FactorySeries 603 Series 604E Series 606 Series 611/610Eccentric Plug Valve Eccentric Plug Valve Eccentric Plug Valve Eccentric Plug ValveSolid Ductile Iron Plug Threaded End Epoxy Seat Three Way Valve Welded Nickel Seat Grooved End Ductile Iron Body Flanged and MJRound Port Solid Ductile Iron Plug Stainless Steel Bearings 285 CWP RatingsLow Pressure Drop Stainless Steel Bearings AWWA C-606 Grooved ANSI B16.1 FlangesMemory Stop Low Pressure Drop Solid Ductile Iron Plug MJ AWWA C111NPT End Connections Lift & Turn NOT Required Low Pressure Drop Welded Nickel SeatSizes 1/2"-2" High Solids & Flow Capacity Ductile or Steel Pipe Solid Ductile Iron Plug Sizes 3"-16" Sizes 3"-24" Low Pressure Drop Sizes 2"-72" FL Sizes 3"-48" MJModel 625 Series 8000 Series 8500 Series 9000Eccentric Plug Valve AWWA Swing Check AWWA Swing Check AWWA Swing CheckAvailable in Threaded Full waterway Full waterway Clear waterway and Flanged Ends Weight or Spring Ductile Iron Construction Weight or SpringRated for 175 psi Bronze/SS Body Seat Ring Weight or Spring Air or Oil CushionSizes 1/2"-4" Bronze/Buna/EPDM disc insert Air Cushion Bronze/SS Body seat ringUL/CGA Listed Sizes 2"-36" SS body seat ring Bronze/Buna/EPDM disc insert Buna disc insert Sizes 3"-72" Sizes 3"-24"Model 720 Series 700 Figure 851 Figure 510/511Wafer Check Valve Wafer Check Valve Flex Check AWWA Butterfly ValveCenter Guided ANSI Class 125/150 Wafer Check Valve Million Cycle Certification Complies with AWWA C-504Check Valve High Flow Capacity Complete Ductile Iron Construction Class 150B Flanged or MJRated for 150 psi Narrow Face-to-Face 285 psi Pressure Rating Ductile body and discUtilizes Bronze disc Sizes 3"-12" Fully Epoxy Lined Interior Seat in body and Seat 316 SS Internals No Internal Shafts, Bearings or Bushings Flow through disc onSizes 2"-12" Disc Position Indicator No External Levers, Weights or Springs 30" and larger Hard or Soft Epoxy Paint on all sizes Rubberlining Available standard 2"-24" Size Range 3" - 72" Backflush Devices Proximity SwitchesFigure 565/566 Figure 740 Figure 821General Service Double Disc Check Valve Globe Style Check Valve • SO 9001:2000 IButterfly Valve Wafer pattern Center guided CertifiedMeets MSS SP 67 check valve check valve. rated for 200 psi. Utilizes bronze discCast Iron BodyBronze Disc Available in sizes Bronze/Buna/EPDM seat • ield Services F 2"-36" with a disc and seatOther Materials Upon Request Buna N/EPDM rubber seat. and is available AvailableWrench or Gear in sizes 2"-24". Operated Available2"-24" Size Range • ngineering E Services MLC 509

×