Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.
Project Research Proposal
Project Research Proposal
Design of 4.5km Nawakilli to Balili check post
link Road
Submitted by
...
Project Research Proposal
Table of Content
PROJECT RESEARCH PROPOSAL.........................................................
Project Research Proposal
1. Title:
Design of 4.5km Nawakilli to Balili ceck post link Road
2. Prepared by:
• AMJAD PERVEZ...
Project Research Proposal
5. Scope:
This research project covers the following:
5.1. Survey (preliminary & secondary) and ...
Project Research Proposal
7. Abstract:
A road is a thoroughfare route, or way on the land between two places
which has bee...
Project Research Proposal
10. Research Methodology:
The project will include following methodology for completion
10.1. Pl...
Project Research Proposal
10. Research Methodology:
The project will include following methodology for completion
10.1. Pl...
Upcoming SlideShare
Loading in …5
×

Project Research Proposal Design of 4.5km road

10,370 views

Published on

Published in: Engineering
  • Be the first to comment

Project Research Proposal Design of 4.5km road

  1. 1. Project Research Proposal Project Research Proposal Design of 4.5km Nawakilli to Balili check post link Road Submitted by (FALL-2010) • AMJAD PERVEZ: 13380 (Group Leader) • ASSADULLAH: 12816 • HAZOOR ALI SHAH: 12699 • RIAZ KHAN: 15265 • BILAWAL IBRAHIM: 15628 • SHARAF UD DIN: 12562 Supervised by ENGR. NAWAZ ALI Lecturer Department of Civil Engineering Faculty of Engineering Supervised by Nawaz Ali Kakar Page 1 of 6
  2. 2. Project Research Proposal Table of Content PROJECT RESEARCH PROPOSAL...............................................................1 TABLE OF CONTENT.......................................................................................2 1.TITLE:.............................................................................................................3 3.CHECKED BY................................................................................................3 4.APPROVED BY .............................................................................................3 5.SCOPE:..........................................................................................................4 6.COPYRIGHTS:...............................................................................................4 7.ABSTRACT: ..................................................................................................5 8.OBJECTIVES.................................................................................................5 9.REFERENCES...............................................................................................5 10.RESEARCH METHODOLOGY:...................................................................6 11.POTENTIAL BENEFITS...............................................................................6 Supervised by Nawaz Ali Kakar Page 2 of 6
  3. 3. Project Research Proposal 1. Title: Design of 4.5km Nawakilli to Balili ceck post link Road 2. Prepared by: • AMJAD PERVEZ: 13380 (Group Leader) • ASSADULLAH: 12816 • HAZOOR ALI SHAH: 12699 • RIAZ KHAN: 15265 • BILAWAL IBRAHIM: 15628 • SHARAF UD DIN: 12562 3. Checked by NAWAZ ALI KAKAR Project Supervisor Lecturer Department of Civil Engineering 4. Approved by Dr. Gul Ahmed Jokhio Assistant Professor Chairman Department of Civil Engineering Supervised by Nawaz Ali Kakar Page 3 of 6
  4. 4. Project Research Proposal 5. Scope: This research project covers the following: 5.1. Survey (preliminary & secondary) and levelling of the road. 5.2. Geometrical designs (Long Sections & cross Sections). 5.3. Different types of Soil Tests: 5.3.1. Moisture Content test. 5.3.2. Liquid Limit test. 5.3.3. Plastic Limit test. 5.3.4. Shrinkage Limit test. 5.3.5. Proctor Test. 5.3.6. California Bearing Ratio (CBR) Test. 5.4. Design of culverts (pipe, box). 5.5. Design of causeway. 5.6. Design of curve. 5.7. Road Finishing (Alignment). 5.8. Estimation and Costing. 6. Copyrights: The copyrights of the project will remain with Department of Civil Engineering, Faculty of Engineering, Baluchistan University of Information Technology, Engineering and Management Sciences Quetta. Supervised by Nawaz Ali Kakar Page 4 of 6
  5. 5. Project Research Proposal 7. Abstract: A road is a thoroughfare route, or way on the land between two places which has been paved or otherwise improved to allow travel by some conveyance, including a horse, cart, or motorcycle vehicle. Designing of our road is based upon the AASHTO specifications under the following standards, Geometric design: AASHTO 2001 and Pavement design: AASHTO 1986-Road note 31-1993. By carrying out survey & levelling collected the road data which is further required to draw the long-sections & cross-sections. By gathering the soil samples from the road site we then performed specified tests. All the above information will be used to design the road. 8. Objectives The prime objective of this project is to connect the rural area (Shah wali) with Nawakilli and Saraghurgai. The aim of this project work is to fulfil the demand of the road for the sake of increasing population, for which we will have to plan and design the road. In this project we will work on the Softwares related to Transportation engineering e.g. GPS for finding the coordinates of the proposed road. AutoCAD for drawing L-sections & Cross sections. 9. References 9.1. AASHTO standards. 9.1.1.1. Geometric design: AASHTO 2001 9.1.1.2. Pavement design: AASHTO 1986-Road note 31-1993. 9.2 Fundamentals of Transportation Engineering book Supervised by Nawaz Ali Kakar Page 5 of 6
  6. 6. Project Research Proposal 10. Research Methodology: The project will include following methodology for completion 10.1. Planning to Carrey the project. 10.2. Weather forecasting to Carrey the survey. 10.3. Collection of data through preliminary & secondary survey & levelling 10.4. Tests for checking the characteristics of the soil (moisture content Test, liquid limit test, plastic limit test, CBR test, proctor test.) 10.5. Analysis of the data obtained by survey & tests. 10.6. Implementation of the data. 10.7. Use of Softwares (GPS for finding coordinates, & AutoCAD for Drawing the L & cross sections). 10.8. Designing of culverts, curve, cause way. 10.9. Estimation and costing. 10.10. Road finishing (Alignments). 11. Potential Benefits 11.1. The Potential benefit of the project is to develop the Linking road between the villages nearby. 11.2. Economic way of approach for the local people. _______ THE END______ Supervised by Nawaz Ali Kakar Page 6 of 6
  7. 7. Project Research Proposal 10. Research Methodology: The project will include following methodology for completion 10.1. Planning to Carrey the project. 10.2. Weather forecasting to Carrey the survey. 10.3. Collection of data through preliminary & secondary survey & levelling 10.4. Tests for checking the characteristics of the soil (moisture content Test, liquid limit test, plastic limit test, CBR test, proctor test.) 10.5. Analysis of the data obtained by survey & tests. 10.6. Implementation of the data. 10.7. Use of Softwares (GPS for finding coordinates, & AutoCAD for Drawing the L & cross sections). 10.8. Designing of culverts, curve, cause way. 10.9. Estimation and costing. 10.10. Road finishing (Alignments). 11. Potential Benefits 11.1. The Potential benefit of the project is to develop the Linking road between the villages nearby. 11.2. Economic way of approach for the local people. _______ THE END______ Supervised by Nawaz Ali Kakar Page 6 of 6

×